Question;Will Toast Titanium work with new'SnowLeopard?

So I do have Toast 7.....will it work? do I need some kind of 'upgrade on my Toast Titanium for it to work with Snow L??? thx in advance! Larry

I've burned a couple of CDs with Toast Titanium 8 with success since installing SL. Haven't tried DVDs yet. However, I had no luck with Tivo Transfer portion of Toast 8. Sounds like that is what other users are experiencing as well. I might have to bite the bullet and upgrade to Version 10.

Similar Messages

I would like to buy an iPhone for my friend in Iceland. Two questions: will the phone work with complete utility in Iceland, and if so, what should I do to confirgure it while in the USA so that it can have full utility in Iceland?

I would like to buy an iPhone for my friend in Iceland. Two questions: will the phone work with complete utility in Iceland, and if so, what should I do to confirgure it while in the USA so that it can have full utility in Iceland?

Bad idea. There are no supported iPhone carriers in Iceland, thus some features may or may not work. Further, there will be no warranty or support for a US purchased iPhone in Iceland...your friend will be on their own. If you still want to go down this road, make sure you purchase an officially unlocked iPhone(GSM model) directly from Apple.

Question on how networking works with new Macbook Pro

Hi,
I have a question about how networking works with my new Macbook Pro. This is my first laptop so am new to mobile computing. I am about to configure it to replace my desktop which uses a wired DSL connection. Once I have my Macbook Pro configured to run off the DSL modem, what happens when I take this computer to a location that has ethernet? Will just plugging in the ethernet cable be enough to get on line? Or is there further configuration work that needs to be done?
I used a Windows laptop from work and all I had to do was plug it in to a hotel ethernet cable to get on line. However, this laptop was never configured to run on my DSL network so I am not certain if that makes things more complicated.
Thanks for your help!

Hi
Your MacBook Pro should just work when plugged into an ethernet connection.
Just check something, Open Network Preferences, you can select it from the Airport icon in the menu bar.
In the left-hand pane click on Ethernet and just check that it is set to configure using DHCP in the right-hand pane, that's it.
So when you plug in the ethernet cable it will ask the router for an IP address and off you go.
I assume that any system you plug into will use DHCP rather than static IP addresses. If it is a static IP address, you will need to manually configure the ethernet settings by inputting the IP address and subnet mask info plus DNS servers.
Usually it is done with DHCP and you don't have to do a thing and likewise your home DSL is DHCP?
If not then you will have to change your settings, make a 'Hotel' setting which you can use when in hotels and keep your 'Home' set-up for when you are at home. In the pull down menu select Edit Locations to add new ones.
Phil
Message was edited by: Philip Tyler

Will iwork '08 work with new lion operating software?

I have snow leopard, but wondering if I will be able to use iwork '08 with it?
Is there an update for iwork '08 with lion to give me some of the new features, such as versions?

You have to purchase iWork '09 in order to upgrade. You can purchase each application or the entire package through the Mac App Store.
The version you have should still work with Lion.

Will 30g iPod work with New Nike product?

I recently purchased a 30 iPod video. I would like to know if the new Nike system works with it as well as just the Nano. The Nike site only lists the Nano as a requirement.
Mac Mini Mac OS X (10.4.7)

Hello, I don't have a direct answer for you, but I can give you some advice. I'd highly recommend you NOT go jogging with your 30GB iPod (or any iPod with a hard drive). The jarring motion of the legs hitting the pavement (or what have you) can cause the hard drive to crash (the read/write head slams into the platter of the hard drive and will damage it, causing the hard drive to fail).
However, if you can catch it when the disk is not spinning,(running only when the disk stops spining, there's cache that puts 25 minutes into memory so the disk doesn't have to spin) you may be ok, but to be on the safe side, I'd go against that as well.

Will FCP 7 Work with New Mac Pros?

Any indication of I will still be able to work in FCP7 on the new Mac Pro 2013? I'm not too keen on FCPX at the moment. Thanks for any info.

All true, however, FCS 2009 (aka FCS 3) does run with the current OSX (10.8.4) which is two full versions beyond the last supported one (10.6.8).
So, the real answer is, we'll have to wait and see how things play out.
x

Will PS apps work with new MS sideloading program

I came across this page ( xxx.aidanfinn.com/?p=16266) outlining the changing sideloading policies MS will be enacting on May 1st. Firstly, may I say "thank you!" to MS for remembering that small developers are important ;) . so for those who haven't
seen it, here's a brief summary from the page:
" The ability to distribute custom apps via Enterprise Sideloading is added to Windows 8.1 Pro via the Windows 8.1 Update.
The license for Enterprise Sideloading is free to those larger customers that are enrolled to an applicable large customer volume license agreement.
Anyone else can get the Enterprise Sideloading license for an unlimited number of devices for $100 through an Open volume license program."
There are a few caveats and requirements, but all in all this is great news as it looks like $100 will allow smaller developers like me to be able to sideload custom apps. Again, thank you MS! So the question is will I be able to install Project Sienna apps
via this method? Are the sienna executables hard wired to look for developers licences or other 'gotchas' that will prevent me from using this tool to create exe's that I can sideload under these new policies? Thanks
slowly getting my mind around .NET...

Well, the day has come and there is no readily available information on the MS Open Licensing site as of this writing. Could someone please share a link to the program info or a link to a purchasing site? thanks
slowly getting my mind around .NET...

Will a G3 work with new lcd displays?

I have a blue and white power mac g3 that is running an avid media composer system. Currently it is running two tube monitors. Can I run two lcd screens off this system. Ideally two 30" or two 23".

You could replace the graphics card with the ATI Radeon® 9200 MAC Edition RoHS 128MB PCI
<http://shop.ati.com/product.asp?sku=3170811>
That can run two displays, but one would have to use VGA, so could not be an Apple LCD. You could use two cards to get two DVI ports, but the performance would be lower. There are no cards for your Mac that will run the 30" display.
A G3 is going to be very slow anyway for graphics, since it does not have array instructions.

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

Office 2011 will not open in OS 10.9 with main user -- works with new user. Suggestions??

Office 2011 will not open in Mavericks with main user -- works with new user. Suggestions??
I've tried removing Office 2011 completely and re-installing to no avail.

Unfortunately, my experience with Office is that somethoping will get corrupted in your account that prevents it from running. I have never figured out what exactly needs to be removed to make it work again.

I am using InDesign CS 3.0.1 with Windows XP. I am getting a new computer with Windows 8.1. Will my version work with this? If not can I get an upgrade?

I am using InDesign CS 3.0.1 with Windows XP. I am getting a new computer with Windows 8.1. Will my version work with this? If not can I get an upgrade?

Probably won't work. You can buy a full license for CS6 which is already two versions and soon to be three out of date or you can subscribe to Creative Cloud.

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

Will Robo Form work with any of you new browsers? I am still running FF 3.6 and will only upgrade if RF works.

Will Robo Form work with any of you new browsers? I am still running FF 3.6 and will only upgrade if RF works. I tried the browse after 3.62 and it did not support Robo form so I uninstalled it

Hi there! Actually, Roboform works with modern versions of Firefox. Please update to Roboform 7.9.0, and update Firefox to version 22 immediately. Continuing to use Firefox 3.6 is leaving your computer at risk for MAJOR security holes, plus known stability and performance issues. Please update immediately.
Also, Firefox will work perfectly fine with XP SP2, but there is no reason why you shouldn't update XP to SP3

Will Apple Pay work with a new iPod Touch

Will Apple Pay work with a new iPod Touch?

No. Only the iPhone 6 and iPhone 6 Plus have the necessary hardware chip (called NFC) to use Pay.

Altec InMotion . . . will it work with newer iPods?

Got my iPod stolen. I had the old 60 or 80 gig monochrome screen white iPods. try to find them on eBay but it shows every iPod ever made and don't know how to specify the one I have.
Getting a new one, apart from being unnecessary, is all my peripherals (inMotion speakers and iTalk) and i don't know if they will work with newer iPods.
On inMotion since that's what I use the most, although the size of the "hole" is big like the older iPods the actual connector seems like it might just fit into the newer iPods. Online Altec says it fits various iPods but I have no way of knowing if it's my same unit they're referring to or a new one.
Also, if anyone knows how you identify that earlier iPod (bought in 03-04) for eBay searches, I've gone through pages and haven't found a single one like mine.
thanks
enzosf

P.S. It had the track wheel on the bottom and it was either 60 or 80 gigs. Bought in Fall 2004.
thanks

Question;Will Toast Titanium work with new'SnowLeopard?

Similar Messages

Maybe you are looking for