Question with installing operating system to my new hard drive

I just ordered a new hard drive for my macbook. I've had no problems finding how to take out the old one and install the new one into my computer, but I can't seem to find information on how to install osx onto the my computer again. Is it as simple as putting in the osx disks or are there others steps that need to be taken for the macbook to recognize my new hard drive?

Drive Preparation and OS X Installation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Quit DU after formatting has completed. Install OS X.
8. Restore your files from your backup or put your old drive into an external enclosure so you can restore from your old drive.

Similar Messages

How do I install operating system on a new hard drive?

Hi
I thought all I had to do was use my recovery disk that came with my laptop, however while the laptop was working fine for a few days it now has an error message when I try to load up windows, something along the lines of 'image error, check installation diskette'.
Have I done something wrong?
Any advice would be greatly appreciated.
Thanks

Hi buddy,
Installation on new HDD is very easy. Everything what you need is Toshiba recovery disk and you have to boot from this disk for starting the installation. Everything happens automatically and factory settings will be restored on new HDD.
Does this work?

Restore Windows 7 operating system on a new hard drive in HP Mini 210 1095NR

I have a HP Mini 210 1095NR that had its hard drive crash and is not recoverable. I have purchased a Seagate 320 gig hard drive to replace the original (160 gb I think) and I have ordered HP recovery disks. They came as a set of two disks. I used a free software (Daemon) to make ISO copies to two USB sticks one for each disk. However, in researching this further it appears that using a clean drive will not be compatible with the recovery disks sent by HP. There were mentions on the site that I visited, that I will need to purchase from HP some other media for a clean installation. Is that correct and/or can I format the hard drive myself and then use the recovery disks from HP?

you can format the harddisk first.
complete the installation of any os..
then keep your HP recovery disks and boot in..
now you can be capable of using recovery disks
Hope this helps
**Click the KUDOS star on the left to say 'Thanks'**
**---'Accept as Solution' ----**if it solves your problem and make it easier for other people to find solutions.

My macbook pro is still under warranty. I have just put it into Mac 1 to be repaired because I had the folder with the dreaded Question mark on it....new hard drive. I was told that if I wanted my data retrieved, I would have to pay $445 p/h. Ahh!!!

My macbook pro is still under warranty. I have just put it into Mac 1 to be repaired because I had the folder with the dreaded Question mark on it....new hard drive. I was told that if I wanted my data retrieved, I would have to pay $445 p/h. Ahh!!! Shouldn't that be covered by warranty?

My newest Mac just did the same "folder of death" dance. It's too late for you now, but you might consider a passport backup drive.You can get 2&3 T-bytes now fairly reasonably priced. A given with computers is they will crash, just a question of how bad and when, so you can be prepared for the next time.

Is it possible to run an operating system from an external hard drive?

Really weird question here, but I've always wanted to know this. I have a MBP 13" mid-2012 and I installed a 256GB SSD. I currently have OSX 10.9 and Windows 8.1 installed on the drive, but is it possible to actually run an operating system from an external hard drive. I don't want to install anymore operating systems onto the internal SSD because I don't want to run out of space. So, I'm wondering can I install Linux on an external hard drive, the same way I would on an internal hard drive and just plug it in via USB 3 or Thunderbolt? Is it actually possible to use a computer this way? I know I can boot from a usb stick, so is it possible to actually use a computer with an operating system installed in an external hard drive?

windows don't support being installed on usb mass storage installs like usb

How to install Windows XP on a new hard drive in desktop computer

Have a Lenovo desktop. I replaced the defective hard drive. Obtained Windows XP installation disks from Lenovo. I received recovery two
Recovery CDs, namely Rescue and Recovery CD and Product Recovery CD along with 5 CD Roms ( 1of 5 through 5of 5).
I want to install Windows XP in my new Hitachi hard drive. Should I use only the 5 CD ROMS 1 thru 5, leaving out the Recovery and Rescue CD
and Product Recovery CD Rom.
How to I install Window XP in my new hard drive? I am not a computer
wizard. As a retired IBM senior citizen I need some help from the community. I am not cognizant with the steps to follow. I am a new
member of this great community.
Thanks a bunch ! padman
personal informations removed for your own security

padman215, welcome to the forum,
you need to boot from the Rescue and Recovery cd and select to recover the system and then to recover to factory state. It will then eventually ask for the other discs.
Please be sure that you read the messages carefully; if it asks for a supplementary disc, (which you don't seem to have), you need to click on "no" should it ask for one - this throws alot of people.
Happy installing
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

How do I move my operating system from one internal hard drive to another on the same Mac?

My question is pretty straightforward: How do I—or can I—move my operating system from one internal hard drive to another on the same Mac Pro desktop?

I'll let baltwo come in with a definitive answer, but the last time I just made a clone, CCC used Disk Utility to create a recovery partition on an external drive's partition. You get these windows successively (and it did create it with a message that it was successful):

Installing OS X on a NEW hard drive

I just installed a new hard drive on the macbook pro. however, when i run the installation disk it never actually installes os x instead it trys to install the applications, but cant find the drive. How do I install OS X on a new hard drive? Thanks.

Hello,
The first thing you need to do is partition and format the drive.
From the OS X installation screen, go up to the menus at the top, and locate Disk Utility.
Launch Disk Utility.
Now, select your hard drive on the left.
Then, click on the Partitions Tab.
Now, choose the single partition option (unless you want to divide the drive for some reason). Then, give it a name.
Choose the format "Mac OS X Extended (Journaled).
Now, click on the button to partition the drive.
When it's done, exit Disk Utility.
Now, proceed with the installation. If it still won't see the hard drive, then re-start from the installation disk again and try it again. It should see the hard drive now and permit you to install on it.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

How can I re-install CS2 upgrade on a new hard drive without serial no. of previous Photoshop 5?

A new hard drive has been installed on my G4 Mac with OS10.4. I am trying to re-install CS2 Premium on the new hard drive but I no longer have the serial number of my previous Photoshop 5. I need to enter this as the CS2 was an upgrade. I have spoken to Adobe technical support but they no longer support CS2 so are not able to help. They recommended that I try the Adbe Forum. All my Adobe products have been bought legitimately. I know people manage to use pirated Adobe software so there must be some way for me to activate a legally bought product.

Michael
Thank you for your email and suggestion.
I have tried that and the only product listed is my CS5 Design Premium (which was an upgrade), none of my previous Adobe products are listed.
I am now looking to see if I can buy an old version of Photoshop that will work on a Power PC G4 Mac with OS 10.4.
I only need Photoshop on that Mac to paint from, not the rest of the Suite.
It is infuriating that I already have a legitimately bought Adobe product (as all mine have been) but I am unable to use it.
Regards
Trevor

Trouble installing 10.4 on a new hard drive

My hard drive died, so I'm trying to install 10.4 on a new hard drive. I'm using the same disk that came with my laptop. I get as far as "select a destination" and the hard drive doesn't show up to choose. I saw another post that suggested partitioning the hard drive first, so I did that, and still no luck. Can anyone help?

Thanks for the welcome, and for the attempt to help. I'm starting to wonder if I got a bum replacement hard drive? I've just restarted twice, it now takes FOREVER for the apple and the little spinny thing to show up when I start up and hold down the C key, and now when I go to disk utility the hard drive doesn't show up in the list of choices at all. Do you think it's worth pulling out the hard drive and sticking it back in again? I have no idea if that will make any difference?

Playing video and running an Operation System in the external hard drive

I am sorry that this question is not relevant to apple but I want to ask if I paly video or run an operation system on my external hard drive, will it shorten the life of my mac air or my harddrive.

Probably not. That said anything can and will eventually break but what you are doing what these devices were designed to do. Relax and enjoy.

Need Help Installing an OS on a new Hard Drive

H, I just installed a new Hard Drive on my G4. My problem is I cannot find the original G4 install discs.
I do have OSX Panther discs which I bought later. Can I use these to install a new OS?
How would I do this as the new Hard Drive is brand new and probably not formatted? Do I power up the mac and load the Panther install disc 1 or is this not the correct procedure?
Also I have an external LaCie CD drive because the one in the mac doesn't work. Will the external LaCie CD drive be recognized when I put the OSX Panther discs in it to install an OS on my new Hard Drive?
Sorry for so many questions but I don't want to mess this up.
Thanks

Thanks for replying Thomas. Well my G4 Hard Drive was shot so I took it out and installed a new one so I have to reinstall everything (new OS & all applications). I tried to use Super Duper to Clone the HD but the HD was too far gone, so now I need to install an OS on the new Hard Drive.
I can't find my original G4 install cd's. I do have Panther OS discs and an iLife disc I bought awhile back. Can I use these instead of the original G4 install disc?
Here's the process to install a new OS as I understand it. Please correct me if I am wrong or am missing a step.
1) Put the first Panther install disc in the cd tray.
2) Power up the G4 while holding down the "C" key
3) Follow the installation instructions
Thanks!

I'm having to re-install PSE 11 on a new hard Drive. I clicked the installer and it ran, but says it's missing the .exe file. I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11. Now I'm contactin

I'm having to re-install PSE 11 on a new hard Drive. I clicked the installer and it ran, but says it's missing the .exe file. I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11. Now I'm contacting you

Okay, so, fast forward from July to now -
- I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
- My computer spent at least 8 hours behind their closed doors in the workshop
- Several complete erases of the harddrive have taken place
- Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
The good news is:
- They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
- They believe that my problems stem from either 1 of 2 things:
- Faulty Hard Drive (even though it is brand new)
- The wrong build of software being installed.
Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
- Andrew =)

Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

if there's a problem with the number of installations, you'll see a message about an excess activation problem.
if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
otherwise, attach a screenshot of the error message or quote it.

I reinstalled my system on a new hard drive, from time machine. However my old photos seem corrupt within aperture. iphoto seems okay. Have you heard of this?

I reinstalled my system on a new hard drive, from time machine. However my old photos seem corrupt within aperture. iphoto seems okay. New photos take a long time to load as well.
Have you heard of this?
Thanks

We need a little more information to be able to help.
However my old photos seem corrupt within aperture.
What kind of corruption? And when do you see it? All your images, or only some? Are the images distorted, discolored, or not displayed at all?
Are you shooting in raw? Is your library referenced or managed? Is your library on your system volume or on an external harddrive?
And it would help to know your MacOS version and Aperture version too.
Regards
Léonie

Question with installing operating system to my new hard drive

Similar Messages

Maybe you are looking for