Questionnaire for Siebel Campaign sizing determination?
May I know if there is any generic or proprietary questionnaire for determining hardware sizing for Siebel Campaign modules? The feedback would then be provided to SCS for the sizing estimation. Thanks in advance
Sorry to answer , that this sizing is usually part of ACS engagement or a consulting firm mission.
Bare minimum (and I really mean bare) can be found on the SRSP manual.
Fine tuning of the sizing will depends on your customer segmentation complexity, siebel processes running, many factors that requires a workshop or 2.
1 point to keep in mind, is that firing 5 million user email campaigns requires to be White listed. Many company outsources this part of the process as this is not a 1 day effort.
Refer to the article http://en.wikipedia.org/wiki/Whitelist.
Best Regards
EvtLoglvl
Similar Messages
-
Hi Everyone,
Can any one body tell me the process of the questionnaire assignment to the leads.
actually i have followed the below process for the Questionnaire in the leads:
1 )I have maintained the questionnaire for the lead application in CRM_SURVEY_SUITE
2) Define determination for the lead questionnaire : in this i have assigned questionnaire, lead transaction type, item category, for the determination.
3)i have assigned the qualification levels to the lead questionnaire
But i have not maintained determination criteria for the questionnaire.Is it necessary to maintain that.
After maintained the above 3 steps i have tried to create a lead transaction in CRMD_ORDER Transaction.But in the lead transaction EVALUATION tab i didn't see any questions in that, but in the above 2nd step i have maintained the maintained questionnaire to the lead transaction.I want to see the questions in the evaluation tab.
Can anyone help me how to get the questionnaires in the lead transaction and also plz tell me did i missed any settings for that.
Regards
NagarajuHi Nagaraju,
Your requirement is not clear.
- Do you want to see the same questionnaire being determined for all lead types?
- Do you have a pre-condition based on which questionnaire should be displayed for lead transaction type?
- what is the version of CRM you are using?
You have mentioned "I have assigned questionnaire, lead transaction type, item category, for the determination." So while creating the order just ensure that it matches determination criteria of your item category. (select a product and check)
Regards....Arup -
How many SMS Siebel Campaign can send?
My Client system has a capability to send 5m SMS from gateway side per day but not sure what could be the capabilty of Siebel campaign SMS module has.
As per our dev team Using webservice we can send 10K odd SMS per day which is well below by SMS target for campaign.
Cam Siebel Campaign send 1M SMS per day? if yes then what configuration we need to make and what component we need to use.
Amit
9920605666Hi Amit,
The best way to send high volumes of SMS would be to export a list, export it to another location and then have another process read this file and send the requests to the SMS gateway.
Regards,
Pete -
Campaign Partner Determination
Which SAP default partner determination procedure would one recommend I copy for a Basic campaign partner determination?
Thanks,
NickI wanted to add Partner Functions like Campaign Manager or something that pertains specifically to campaigns, however it appears that sap doesn't provide anything like this by default..... Is this true?
Thanks again,
Nick
Edited by: Nick Hield on Sep 5, 2008 5:32 PM -
DDLIMP utility is failing while running the DDL_OLTP.ctl script for Siebel
DDLIMP utility is failing while running the DDL_OLTP.ctl script for Siebel source on DB2.
Below is the the log details:
2021 2012-11-08 03:23:46 2012-11-08 03:25:56 -0700 0000002a 001 003f 0001 09 ddlimp 604 736 C:\OBIA\Upgrade\CTLFiles\DDL_.log
ContextInit ContextInit 0 0 2012-11-08 03:23:46 Message Facility failed to init. Siebel Root: C:\DAC\client\utilities
Trace Trace 3 0 2012-11-08 03:23:46 Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Trace Trace 3 0 2012-11-08 03:23:46 Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
Trace Trace 3 0 2012-11-08 03:23:46
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:46 ddlimp /U SIEBEL /P ***** /C siebel /G SSE_ROLE /F C:\OBIA\Upgrade\CTLFiles\DDL_OLTP.CTL /L C:\OBIA\Upgrade\CTLFiles\DDL_
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:46
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:46 Connecting to the database...
DBCLog DBCLogError 1 0 2012-11-08 03:23:52 SQL Warning, SQL State 01004, 0, [DataDirect][ODBC DB2 Wire Protocol driver]String data, right truncated.
DBCLog DBCLogError 1 0 2012-11-08 03:23:52 SQL Warning, SQL State , 40042692, CLog DBCLogError 1 0 2012-11-08 03:23:52 SQL Warning, SQL State 01004, 0, [DataDirect][ODBC DB2 Wire Protocol driver]String data, right truncated.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52 Connected.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52 Reading tables and indexes from DDL file...
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52 Read 522 tables and 1084 indexes from DDL file...
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52 Reading existing schema...
SARMLog SARMInformation 3 0 2012-11-08 03:23:52 SARM is OFF -change param SARMLevel to enable
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Read 0 tablespaces, 6137 tables and 24846 indexes from existing schema...
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Running SQL statements against the database...
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Merging table S_ETL_COSTLST ...
SQLError Statement 0 0 2012-11-08 03:25:56 SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID varchar(15)
DBCLog DBCLogError 1 0 2012-11-08 03:25:56 [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
SQLError Statement 0 0 2012-11-08 03:25:56 SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID varchar(15)
DBCLog DBCLogError 1 0 2012-11-08 03:25:56 [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
SQLError Statement 0 0 2012-11-08 03:25:56 SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID default '0'
DBCLog DBCLogError 1 0 2012-11-08 03:25:56 [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 37000: [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
SQLError Statement 0 0 2012-11-08 03:25:56 SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID default '0'
DBCLog DBCLogError 1 0 2012-11-08 03:25:56 [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 56098: [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 alter table S_ETL_COSTLST modify
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 CONFLICT_ID default '0'
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 ;
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 writeExecDDL error (UTLOdbcExecDirectDDL pDDLSql).
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 writeExecDDL error (UTLDbDdlColModify).
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Error in MainFunction (UTLDbDdlDbMerge).
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Error in Main function...
GenericLog GenericError 1 0 2012-11-08 03:25:56 (logapi.cpp (167) err=1 sys=126) SBL-GEN-00001: (logapi.cpp: 167) error code = 1, system error = 126, msg1 = (null), msg2 = (null), msg3 = (null), msg4 = (null)If you run DAC on a 64-bit windows Operating System, you must create the ODBC data source using the ODBC Administrator tool in %windir%\SysWOW64\odbcad32.exe. for creating the data warehouse tables.
If helps pls mark -
Where to see activities, which are created for the campaign with target group
Hi
I have created a Communication Method in SPRO -> CRM -> Marketing -> Marketing Planning & Campaign Management -> Campaign Executtion - Define Communication Method : Activity has been configured
Activities are not appearing after creation of campaign with target group.
Where to see activities, which are created for the campaign with target group?
Regards
HamidHello,
alternatively to check table CRMD_ORDERADM_H directly you can use the related transactions search for the campaign:
This should bring all activities generated by the campaign. If this is empty first check the job log of the campaign execution job again:
This gives information if any target group members have business transactions created. If the log does not contain the required information you can debug from SM37. The business transactions (activities, leads, sales orders) are generated from function module CRM_MKTTGGRP_PROC_CREATE.
best regards,
Johannes -
Change Capture For Siebel OLTP task in DAC running for more than 10 hours
whole etl load used to complete in 2 hours (as on now siebel data having sample data). since last Friday Change Capture For Siebel OLTP task in DAC execution plan running for more than 10 hours. I am not able to trouble shoot the problem because no log for this task
what could be the reason for this problem? how can I fix that problem?
Appreciate your help
Thanks
Jay.Which ETL is it that is taking the longest (is it an SDE, SIL, PLP?). I have seen someOracle vanilla ETLs coded in a way that is very ineffective. Check the DAC and Informatica logs and find out which mapping it is and where the delay is (e.g. SQL, write to DB..etc).
-
Problems with OracleAS adapter for Siebel
Hi,
I have a problem starting the Java data bean connection from the OracleAS Adapter Application Explorer. When I try to connect to my Siebel Instance I get the following error from the application explorer
Problem Activating adapter. (null). See logs for details.
When I look in my logs $ORACLE_HOME/adapters/application/config/siebelconnection/logs I get the following information
Wed, 11 Oct 2006 16:51:28.0188 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
Found adapter 'IWAF'
Wed, 11 Oct 2006 16:51:28.0204 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
Found adapter 'Siebel'
Wed, 11 Oct 2006 16:51:28.0219 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
[storage] Repository URL 'file:///space/oracle/product/10.1.2.0.2/eaidev1/adapte
rs/application/config/SiebelConnection/repository.xml' resolved to repositoty ty
pe: file
Wed, 11 Oct 2006 16:51:28.0220 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
[storage] Getting Repository reference: 'file:///space/oracle/product/10.1.2.0.2
/eaidev1/adapters/application/config/SiebelConnection/repository.xml&user=null&p
assword=***'...
Wed, 11 Oct 2006 16:51:28.0394 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
[storage] Created Repository System storage.
Wed, 11 Oct 2006 16:51:28.0398 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
[state] State Repository URL 'file:///space/oracle/product/10.1.2.0.2/eaidev1/ad
apters/application/config/SiebelConnection/st_repository.xml' repositoty type: f
ile
Wed, 11 Oct 2006 16:51:28.0399 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA]
[state] Getting Repository reference: 'file:///space/oracle/product/10.1.2.0.2/e
aidev1/adapters/application/config/SiebelConnection/st_repository.xml&user=null&
password=***'...
"aejca_1160581888102.log" 100 lines, 13137 characters
Wed, 11 Oct 2006 16:51:28.0188 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] Found adapter 'IWAF'
Wed, 11 Oct 2006 16:51:28.0204 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] Found adapter 'Siebel'
Wed, 11 Oct 2006 16:51:28.0219 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [storage] Repository URL 'file:///space/oracl
e/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/repository.xml' resolved to repositoty type: file
Wed, 11 Oct 2006 16:51:28.0220 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [storage] Getting Repository reference: 'file
:///space/oracle/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/repository.xml&user=null&password=**
Wed, 11 Oct 2006 16:51:28.0394 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [storage] Created Repository System storage.
Wed, 11 Oct 2006 16:51:28.0398 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [state] State Repository URL 'file:///space/o
racle/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/st_repository.xml' repositoty type: file
Wed, 11 Oct 2006 16:51:28.0399 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [state] Getting Repository reference: 'file:/
//space/oracle/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/st_repository.xml&user=null&password=*
Wed, 11 Oct 2006 16:51:28.0415 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [state] Created State Repository System stora
ge.
Wed, 11 Oct 2006 16:51:28.0449 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Creating IWAF Container classload
er using libdir '/space/oracle/product/10.1.2.0.2/eaidev1/adapters/application/lib'.
Wed, 11 Oct 2006 16:51:28.0751 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
Wed, 11 Oct 2006 16:51:28.0752 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Building adapters list...
Wed, 11 Oct 2006 16:51:28.0753 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
Wed, 11 Oct 2006 16:51:28.0754 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
Wed, 11 Oct 2006 16:51:28.0754 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Adapter: Siebel
Wed, 11 Oct 2006 16:51:28.0755 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
Wed, 11 Oct 2006 16:51:28.0755 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Inspecting adapter 'Siebel' modul
es.
Wed, 11 Oct 2006 16:51:28.0770 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Skiping IWAF Container adapter.
Wed, 11 Oct 2006 16:51:28.0807 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
Wed, 11 Oct 2006 16:51:28.0808 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Building default security manager
Wed, 11 Oct 2006 16:51:28.0809 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
Wed, 11 Oct 2006 16:51:28.0811 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] iway.home is set to '/space/oracl
e/product/10.1.2.0.2/eaidev1/adapters/application'.
Wed, 11 Oct 2006 16:51:28.0812 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] iway.config is set to 'SiebelConn
ection'.
Wed, 11 Oct 2006 16:51:28.0813 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Using default: keystore.type=jks
and keystore.password=iwaysoftware
Wed, 11 Oct 2006 16:51:28.0814 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Security manager using keystore :
/space/oracle/product/10.1.2.0.2/eaidev1/adapters/application/config/SiebelConnection/security/keystore.jks
Wed, 11 Oct 2006 16:51:29.0416 BST - Thread[Thread-5,6,main] [warn ] [IWAF JCA] [container] Security manager will not be avai
lable due to problem.
java.lang.IllegalStateException: Problem loading keystore: java.io.EOFException; make sure the password is correct
at com.iwaysoftware.security.KeyStoreUtil.getKeyStore(KeyStoreUtil.java:39)
at com.ibi.adapters.util.security.SecurityManagerImpl.<init>(SecurityManagerImpl.java:45)
at com.iwaysoftware.af.container.IWAFFactory.buildSecurityManager(IWAFFactory.java:209)
at com.iwaysoftware.af.container.IWAFContainer.start(IWAFContainer.java:169)
at com.ibi.afjca.spi.IWAFManagedConnectionFactory.getContainer(IWAFManagedConnectionFactory.java:536)
at com.ibi.afjca.spi.IWAFManagedConnectionFactory.createManagedConnection(IWAFManagedConnectionFactory.java:215)
at com.ibi.afjca.spi.IWAFConnectionManager.allocateConnection(IWAFConnectionManager.java:35)
at com.ibi.afjca.cci.IWAFConnectionFactory.getConnection(IWAFConnectionFactory.java:103)
at com.iwaysoftware.iwae.common.JCATransport.initJCA(JCATransport.java:104)
at com.iwaysoftware.iwae.common.JCATransport.<init>(JCATransport.java:85)
at com.iwaysoftware.iwae.common.AdapterClient.<init>(AdapterClient.java:85)
at com.ibi.bse.ConfigWorker.run(ConfigWorker.java:41)
at java.lang.Thread.run(Thread.java:595)
Wed, 11 Oct 2006 16:51:29.0419 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
Wed, 11 Oct 2006 16:51:29.0420 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] Starting IWAF container managers.
Wed, 11 Oct 2006 16:51:29.0420 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] *********************************
Wed, 11 Oct 2006 16:51:29.0420 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF AdapterManager starting...
Wed, 11 Oct 2006 16:51:29.0421 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF AdapterManager started.
Wed, 11 Oct 2006 16:51:29.0421 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF ChannelManager starting...
Wed, 11 Oct 2006 16:51:29.0421 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF ChannelManager started.
Wed, 11 Oct 2006 16:51:29.0422 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF ChainManager starting...
Wed, 11 Oct 2006 16:51:29.0422 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF ChainManager started.
Wed, 11 Oct 2006 16:51:29.0422 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF PortManager starting...
Wed, 11 Oct 2006 16:51:29.0422 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF PortManager started.
Wed, 11 Oct 2006 16:51:29.0423 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
Wed, 11 Oct 2006 16:51:29.0423 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] IWAF AEManager start
ing...
Wed, 11 Oct 2006 16:51:29.0423 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
Wed, 11 Oct 2006 16:51:29.0424 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
Wed, 11 Oct 2006 16:51:29.0424 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Building Target ID l
ist..
Wed, 11 Oct 2006 16:51:29.0424 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
Wed, 11 Oct 2006 16:51:29.0826 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Creating TID for ada
pter 'Siebel' configuration 'ReutersSiebel'.
Wed, 11 Oct 2006 16:51:29.0840 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [Siebel.service_ReutersSiebel] Cr
eated adapter instance for class'class com.ibi.adapter.siebelaf.SiebelAdapter'.
Wed, 11 Oct 2006 16:51:29.0892 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
Wed, 11 Oct 2006 16:51:29.0893 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Building Port list..
Wed, 11 Oct 2006 16:51:29.0893 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
Wed, 11 Oct 2006 16:51:29.0902 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
Wed, 11 Oct 2006 16:51:29.0902 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Building Channel lis
t..
Wed, 11 Oct 2006 16:51:29.0911 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
Wed, 11 Oct 2006 16:51:29.0945 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [Siebel.channel_ReutersSiebelHTTP
] Created adapter instance for class'class com.ibi.http.adapter.HTTPListenerAdapter'.
Wed, 11 Oct 2006 16:51:29.0955 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] Creating channel for
adapter 'Siebel' configuration 'ReutersSiebelHTTP'.
Wed, 11 Oct 2006 16:51:29.0992 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] IWAF AEManager start
ed.
Wed, 11 Oct 2006 16:51:29.0992 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] [AE manager] ********************
Wed, 11 Oct 2006 16:51:30.0008 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA] [container] IWAF contained started.
Wed, 11 Oct 2006 16:51:30.0018 BST - Thread[Thread-5,6,main] [info ] [IWAF JCA IAEAdapter] IWAFManagedConnection for IAEAdapt
er:null has listener registered: com.ibi.afjca.spi.IWAFConnectionManager@cb754f
Wed, 11 Oct 2006 16:51:31.0282 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] Loaded and initialized ad
apter class 'com.ibi.adapter.siebelaf.SiebelAdapter'.
Wed, 11 Oct 2006 16:51:31.0289 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] Loaded and initialized ad
apter class 'com.ibi.http.adapter.HTTPListenerAdapter'.
Wed, 11 Oct 2006 16:51:31.0303 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] [com.ibi.mq.MQListenerAda
pter] init called.
Wed, 11 Oct 2006 16:51:31.0303 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] Loaded and initialized ad
apter class 'com.ibi.mq.MQListenerAdapter'.
Wed, 11 Oct 2006 16:51:31.0332 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] [com.ibi.file.FileListene
rAdapter] init called.
Wed, 11 Oct 2006 16:51:31.0332 BST - Thread[AWT-EventQueue-0,6,main] [info ] [IWAF JCA] [container] Loaded and initialized ad
apter class 'com.ibi.file.FileListenerAdapter'.
Wed, 11 Oct 2006 16:51:58.0450 BST - Thread[Thread-7,6,main] [info ] [IWAF JCA] [container] [Siebel.service_ReutersSiebel] Cr
eated adapter instance for class'class com.ibi.adapter.siebelaf.SiebelAdapter'.
Wed, 11 Oct 2006 16:51:58.0811 BST - Thread[Thread-7,6,main] [error] [IWAF JCA] [container] [Siebel.service_ReutersSiebel] Pr
oblem activating adapter. (null). Check logs for more information
java.lang.IllegalStateException
at com.ibi.adapter.siebelaf.SiebelAdapter.activate(SiebelAdapter.java:143)
at com.iwaysoftware.af.container.adapter.ProxyAdapter.activate(ProxyAdapter.java:104)
at com.iwaysoftware.af.container.adapter.AdapterConfiguration.activateAdapter(AdapterConfiguration.java:319)
at com.iwaysoftware.af.container.adapter.AdapterConfiguration.getActivatedAdapter(AdapterConfiguration.java:299)
at com.iwaysoftware.af.container.AdapterManager.getActivatedAdapter(AdapterManager.java:269)
at com.iwaysoftware.af.container.IWAFContainer.getActivatedAdapter(IWAFContainer.java:526)
at com.iwaysoftware.af.container.AEManager.getTargetAdapter(AEManager.java:646)
at com.iwaysoftware.af.container.ae.AETargetMessage.buildGETTARGET(AETargetMessage.java:255)
at com.iwaysoftware.af.container.ae.AETargetMessage.build(AETargetMessage.java:84)
at com.iwaysoftware.af.container.ae.AETargetMessage.<init>(AETargetMessage.java:54)
at com.iwaysoftware.af.container.AEManager.dispatch(AEManager.java:131)
at com.iwaysoftware.af.container.IWAFContainer.dispatchAERequest(IWAFContainer.java:612)
at com.ibi.afjca.cci.IWAFInteraction.execIWAE(IWAFInteraction.java:270)
at com.ibi.afjca.cci.IWAFInteraction.exec(IWAFInteraction.java:155)
at com.ibi.afjca.cci.IWAFInteraction.execute(IWAFInteraction.java:93)
at com.iwaysoftware.iwae.common.JCATransport.execute(JCATransport.java:204)
at com.iwaysoftware.iwae.common.AdapterClient.getTarget(AdapterClient.java:293)
at com.ibi.bse.TargetWorker.run(TargetWorker.java:37)
at java.lang.Thread.run(Thread.java:595)
My platform is AS 10g (10.1.2.0.2) with Adapters (10.1.2.0.2) on Solaris 10. I am connecting to a Siebel 7.8 instance running on Windows 2000 SP4.
I would be very grateful of any help you could give.
Regards,
Mark.Hi,
There could be couple of possible reasons for this. Please see below:
1. When you configure a adapter target for Siebel 7.7 or 7.8, do not supply a value for "Siebel Server" field. Please see details related to this in the "Defining a Target to Siebel" section of the Siebel adapter user guide.
2. If the adapter is installed in the UNIX platform, then necessary encoding should be added to the Application Explorer and the Application Server. Please see the details for this in the "Establishing a Connection (Target) for Siebel" of the Siebel adapter user guide.
Let me know whether this sorts out the issue or not.
Regards,
Kris -
Application to be install for Siebel Insurance
Hi
We are preparing a demo for Insurance Client but we are not sure which Siebel application will be the ideal for Insurance client. I found some document(http://download.oracle.com/docs/cd/B31104_02/books/InsureSIA/FinanceSIAoverview.html) in google explaning the functionality & modules of Siebel Insurance but it is not clear which particular application is to be used for that. Please
help me with the following clarifications
1, Which application to be used for Siebel Insurance.(if possibel please provide me with the cfg name).
2. Where to get the installer.
3.How to get the corresponding license and how much that might cost.
Thanks in advance
SanjuktaYou should not be looking at Siebel 7, but 8. There is a lot of new functionality in Siebel 8 when it comes to Insurance.
http://download.oracle.com/docs/cd/B40099_02/books/InsureSIA/InsureSIATOC.html
What modules you need depend on what the customer needs/wants.
Siebel application you get at
http://edelivery.oracle.com/
and licence keys at
http://licensecodes.oracle.com/siebel.html
Regarding the costs you need to talk to Oracle sales.
Axel -
Oracle client for siebel server configuration
Hi ,
To install siebel as prerequisite we are installing oracle client on the siebel server machine. Our client is providing ldap.ora instead of tnsnames.ora file. Through out my earlier projects we used to have tnsnames.ora entry which is having connection details of database. CAn you Please confirm instead of having tnsnames.ora , can we use ldap .ora which is having Db server details in it. Have you ever seen other clients using this way without tnsnames.ora for siebel installation.
Can you please provide any documentation which confirms that we must need tnsnames.ora, not ldap.ora.
Thanks much in advance.Hi,
Have a look at these documents
http://docs.oracle.com/cd/E11882_01/network.112/e10835/ldap.htm#NETRF011
Is It Possible To Use Ldap.Ora On The Client To Get Tnsname Entries From An Oid? (Doc ID 461151.1)
Using TNS_ADMIN with LDAP.ORA and Net Manager (Doc ID 189627.1)
What Is The Search Order For The LDAP.ORA File ? (Doc ID 363283.1)
Thanks,
Krishna -
Questionnaire for Loyalty Management
HI Experts,
I have created a Questionnaire for Membership Object.
Now i need to store the questionnaire with link to the Membership Object.
Also i need to show the Questionnaire Assignment Block for the membership Object (Component LOY102H_MSH)
First Question:
Is it possible to use questionnaire for other object apart from One Order? As membership Object is part of Loyalty Framework(Marketing)?
Second Question:
I saw that the Component ICCMP_SURVEY is linked via BTADMINH.
So does that mean i need to create a One Order Activity first and then use it to link the memberhsip to the Questionnaire?
Can anyone help in this regard?
Thanks and Regards
Gaurav Kumar RaghavHi Gaurav,
The component ICCMP_SURVEY specifically provides questionnaires UI for one order objects. So, you can't use it directly with a membership object. However, it might still be possible to link a membership to a questionnaire on web UI by using a one-order activity. You can refer to any one-order object component to see how ICCMP_SURVEY component can be used for this purpose.
Otherwise, you will have to build your own component to link membership object with survey.
Regards,
Shiromani -
Hi experts!
I'm using CRM 7.0.
I'm looking for the table for Marketing Campaign where I can find the assignment of Survey (name or GUID) to the Campaign (name or GUID).
It would be great to find the common table of Marketing Campaign values.
<<Text removed>>
Thanks!
Kostya
Edited by: Matt on Oct 28, 2010 9:47 PMHi Kostya,
I'm not working with CRM actually but I think you can get the campaing GUID and select the table CRMD_LINK. Did you try that? After this you can check the return of CRMD_LINK in the survey table.
Hope this helps.
Best regards,
Caíque Escaler -
SAP Hardware sizing for "User-Based sizing".
Short Text
User-based Hardware Sizing
Long Text
Dear SAP Support,
We would like to know the SAP Hardware sizing for "User-Based sizing".
Our queries is
1. In "User-Based sizing", What we have to consider,
the number of users are calculated in the basis of
Concurrent users in the system in a given point of time
or
total number of users logged into the systems in the whole day?
We have referred the SAP document "Sizing SAP System" and the above
point are not clearly mentioned.
Regards,As the document says there are number of possible definitions for "users" in SAP context...
For understanding assume that no of users logged to the system they consume different resources / areas in the system, some login to the system whole day but they don't work whole day, some user open multiple session to work while other open multiple session but they don't exactly work on it which means (every new session consume memory/resources) like you said their are concurrent users wherein they work and consume resources (SAP WPs)
So before finalizing the sizing first compare the both reports (user based, thorhgput) and read the advantages and disadvantages for both. You can also consult with SAP / Account Manager to help you
as per SAP document there's no point in counting no of pc's, laptops to calculate no of users
Also refer:
http://www.sap.com/solutions/benchmark/index.epx -
Is the OPA connector for Siebel OS independent?
Are there different versions of OPA connector for Siebel depending on the Operating System? Or is it OS independent?
In the installation guide it is mentioned that the system requirements are checked with the CRM base only.
In e-delivery the connector for Siebel is present in the Windows section only.1009094 wrote:
Are there different versions of OPA connector for Siebel depending on the Operating System? Or is it OS independent?
In the installation guide it is mentioned that the system requirements are checked with the CRM base only.
In e-delivery the connector for Siebel is present in the Windows section only.The OPA Connector for Siebel is Operating System independent. It uses Java or .NET for the the OPA runtime, and the Siebel part of the connector just runs on the standard Siebel server.
* To install the OPA Connector for Siebel you will need to run Siebel Tools and Siebel Web Client from a Windows machine (32 or 64)
* To author interviews you need to run Oracle Policy Modeling on a Windows machine (32 or 64).
Cheers
Frank -
I new to installing Siebel Patch 7.8.2.16 for Microsoft Windows 2003 Servers, Mobile Web Client. We are currently running Siebel version : 7.8.2.14 on 7.8.2.14 SIA [19251] ENU patch applied. We need to install upgrade to Siebel 7.8.2.16 to install QF0E26 for an issue with MVG popup. What is the best practice to create Siebel image file from Siebel CD which has multiple JAR files on CD media for Siebel CD Media pack sent to me. Let me know if you need additional details. Thanks JollyRoger
Hello Jolly,
Thanks for using Oracle communities.
You need to download installables for 7.8.2.16 SIA. Follow below instructions to download:
1) Login to My oracle support through your credentials
2) Go to tab 'Patches & Updates'
3) Enter patch number as '11687049' in 'Patch Name or Number' field and click on search.
4) Download patch for Windows.
Once you download, you need to use Image Creator Utility to generate an Installation image.
Please follow below online bookshelf link on how to create Image.
http://docs.oracle.com/cd/B31104_02/books/SiebInstWIN/SiebInstCOM_Image5.html#wp1594731
I hope it helps.
Best Regards,
Chetan
Maybe you are looking for
-
Hyperlink below a label in Form in APEX 4.2
I have the following two Rows in a form in APEX. I want to add a hyperlink link just below the warranty expiry date label. Warranty Expiry Date Issued To Can anyone help me?
-
I'm using a Dual 2.5 GHz PowerPC G5, 2GB ram, OSX-10.4.10 I have used Lightroom as a demo successfully & now purchased a serial number. As soon as I try to launch Lightroom it quits immediately. The splash screen shows with register serial number etc
-
SQL Developer Export hangs - version 3.2.20.09
Hi, I installed SQL Developer Version 3.2.20.09 Build MAIN-09.87 and try to export a query into csv file, it hangs after writing 100 rows, I don't see the file grows on OS, the progress-bar keeps saying 100 row I also tried .xls format, the problem r
-
Bootloader unlock allowed:NO
Hello guys!I just bought a Sony Xperia Z3 , but unfortunately when I wanted to root it and checked bootloader,it was NO.Sony,please change this,it's not fair,because I paid to get my phone sim free so I want this to the bootloader.C'mon guys,don't te
-
Not receiving emails (with rules) from hotmail on my Mail
Hi, i have recently set up my Mail on Moutain Lion, adding a Hotmail account. i can only receive the emails sent to my hotmail inbox. However, those with rules applied, ie those sent directly to the hotmail folders , cannot be received on my Mail. Pl