Questionnare link to the Exernal candidate on the HRRCF_CS_EXA_QUESTIONNAIR

Hi
I am able to populate the questionnaire link on the Candidate application. My requirement is that I need to send the Questionnaire link to the external candidate through HRRCF_CS_EXA_QUESTIONNAIRE. How to identify this link?

Hello Nicole
Thank you for your response, does it mean that that activity of sending questionnaire link should form part of the Selection activity. However, the u2018questionnaire letter or linku2019 will be send to very few candidates (say 1-2) in the Talent pool.
Is there any other way except including this activity into the selection activities?
Regards

Similar Messages

Open report link in the same page

Hi,
I have two reports in a dashboard page with a prompt. Now, I need to display one report in the compound layout and the other should appear as a link. When a user wants clicks on the link, the second report should also be displayed along with the first report with the prompt value.
I tried using Display result --> Link in the dashoard option. But then when I click on the link the first report is not displayed.
Any suggestions please.
Thanks in advance.
Ronnie.

they dont want to see the first report.
Is there a way in which the Prompts are also display along with the second report?Then create the same prompt on the second report also.
Cheers
Nawneet

For some reason, I am unable to click on links in the very lower left of the screen. It does not matter if the screen is maximized or smaller. This started a little over a month ago and I can't figure out how to fix it. Any ideas?

Windows 2007. Firefox is currently up-to-date. The problem is the most notable on https://evolve.elsevier.com/cs/Satellite/StudentMyHome?Audience=Student although I have noticed it on other sites. On this site, the position of some of the links on the screen makes it difficult to do my online course work.
This does not happen in Internet Explorer, or in Firefox when used on my school's computers, although I haven't been on them since Spring semester ended a few weeks ago.

Does it help if you make the Find bar (Ctrl+F) or the Add-ons bar (Ctrl+/) (Firefox > Options or View > Toolbars) visible?

Adding link to the photo and Name in the outlook contact card -Enterprise wide

How can I make the name and photo in the outlook contact card link to my profile page? I read articles where it is mentoined that the URL is set in Registry, currently my organization does not have any link associated with photo and name in contact card.
I want to implement this across the organization , any deployment or changes that I need to do to implement this across?
Appreciate if you can provide details on how this is done. The url will look like this:
https://www.produrl.com/userid={userid}
How can I dynamically add respective userid in the link?Appreciate your response on this.

So you want to redesign the contact card in Outlook? Are you using SharePoint? If signed into sharepoint via the social connect, there is a link to the mysharepoint page under View source. I don't think you can change the link or customize the card,
beyond what is listed here:
http://technet.microsoft.com/en-us/library/ff631135(v=office.15).aspx#BKMK_ContactCards
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

Please don't post the same question multiple times!

Is there anyway I can make a link on the "value" and not the label (detail form)

Hi there,
I have a master-detail form (within an appl) based on 2 real
tables in a master-detail FK relationship.
The detail block displays 6 rows. Currently you can only place a
link on the label on top of the block.
What I need is to make let's say tha actual value of lastname in
each row display as a link, something like:
rec.lastname_value
I also need to pass the actual ID of that row in the URL used by
href. I know that you could do it in custom "sql", but do not
know how to make my form do that.
Thanks,
Mariana

You can look at IE Tab and IE View.
*https://addons.mozilla.org/en-US/firefox/search/?q=IE%20tab
*IE View: https://addons.mozilla.org/firefox/addon/ie-view/
*IE View Lite: https://addons.mozilla.org/firefox/addon/ie-view-lite/

Movie trailer or any other links in the quicktime player does not work

When I click on the movie trailer/Hot picks/Quick picks links on the player interface nothing happens. When I move the Mouse it changes to a hand showing the link is clickable.
Also when I click on the "Quicktime Website" or the "Quicktime Player Help" from the Help Menu, nothing happens.
When I go to any apple website and clicks on the sample trailer movies links, it is playing the trailer.
Anybody may please tell how to solve the problem.
George
QuickTime 7.0.3 Pro Windows XP Pro

Try logging in to your iTunes account.

Is it possible to create a link on the content of a text annotation??

Is it possible to create a link on the content of a annotation??? Like the content of an annotation is some notes as well as a link...
content -
this is my first annotation(notes)
http://www.google.co.in/(link)
is it possible to create a link for the url given in the content of an annotation??? On click on the url...it should get opened...
please reply its really urgent....

How/where do you want to accomplish it?
Within the document? Using Acrobat? Using another application?
Using Acrobat within the document would be possible using Acrobat JavaScript. You can access the annotation objects of your document, and you then can evaluate the properties of each of these objects. Have a closer look at the Annotation Object section in the Acrobat JavaScript documentation.
You will look for the contents property, and evaluate its content. When you have found something looking like a URL, you can create a link (using the rect property of the annotation), and you have what you want; you might then think to destroy the annotation, as it may overlay the link.
Hope this can help.
Max Wyss.

Creating a Link on the Column Heading

Good afternoon,
I know with reports, you can create a link for each cell in the report attributes section. My question is it there's any way to create a link for the column header without hard coding it into the query that generating the results.
Thanks in advance,
Ivan

Ivan,
If you are using the classical reports, you have the option of creating column header using pl-sql block which will be dynamic. Thanks
Regards,
Manish

Creating a link with the Link Tool

I used the Link Tool to create a Link in my pdf file. The link is set to open a website file. I created 2, one with just a little text and the other was a picture that was 200 X 300 px. When I follow the links, each is opening a full web page. I expected that with the Text link because I put the text on an html page but the picture I sized to the 200X300 but that opened a full web page also. When setting up the link to the Web File I did not see an additional settings as far as how to open the web page such as _parent or _child etc. I believe it is normally the Target.
Does anyone know how I would either do this with the link tool or know of a better way to do it overall?
Thanks
Bob

Hi,
You may be confusing HTML markup for links with PDF links.
In PDF, HTML markup is not applicable.
So "target_xxxx" or any other HTML 'stuff' cannot be used.
For the graphic file (JPG, PNG, whatever), make a web page file that is configured to display the graphic file in a manner you desire.
The web link you set in the PDF, with Acrobat, will result in this web page file opening.
This is the file that will control how the graphic is rendered.
If needed, a resource for HTML "how to" is W3 Schools.
Be well...

Can someone please tell me why when I order an Itunes app. , do I always get charged twice for the same thing. It has happened on two different occasions. Does it have anything to do with having 2 different ipods linked to the same account?

Can someone please tell me why when i order an app on my sons ipod, do I get charged twice for it? When I tried do report a problem with the charge, it said that I can not get a refund on that item. This is the second time this has happened to me. Does it have anything to do with having more then one ipod linked to the same account? Thanks for any help you can give me!!!

It has nothing to do with have more than one device using that account.
After you purchase it once, you redownload it on other devices by the following, not like purchasing a new app.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you really got charged twice for purchases the same app twice with the same account contact iTunes again by:
Apple - Support - iTunes - Contact Us
Make sure that they are really the same app first.

I was doing some thing on my mac and the normal link to the applications folder from the bottom right hand corner disappeared, I cant find it anywhere, Can you help me?

I was doing some thing on my mac and the normal link to the applications folder from the bottom right hand corner disappeared, I cant find it anywhere, Can you help me?

Simple process. If an iPhone go to the Apple Store and not Verizon
the phone from Verizon will be a refurbished device and not new unless under the 14 day worry free guarantee
good luck

If you delete files from your computer, BlackBerry Link deletes the file or collection from your device?

I found the below description from the help of BlackBerry Link, however i never get it work.
Any one know whats wrong or what i need to set?
About deleting music, pictures, videos, and documents?
After you sync your music, picture, video, or document files between your computer and your BlackBerrydevice, if you delete a file or a collection of files, the following actions occur:
If you delete files from your computer, BlackBerry Link deletes the file or collection from your device.
If you delete files from your device, BlackBerry Link doesn't delete the file or collection from your computer.
For information about how to delete a file from your device, tap the Help app on the home screen of your device.

Hey hkfoolman,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Go into BlackBerry Link and click on the BlackBerry and then click on Options. Make sure you have Music, Pictures, Videos and Documents checkmarked for synchronization. Once these are checked, try to remove the files.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Classical Report for linking/applying the goods receipts transaction

Classical Report for linking/applying the goods receipts transaction quantities against oldest schedule line item dates and then downloading the file to Excel.
o Classical Interactive Reports for calculating average Day Payable Outstanding. Option 1) in summary by company code, vendor, currency. (w/ DPO calc) Option 2) in detail (w/o DPO calc) Option 3) special summary by vendor and roughly convert different currency into one currency of choice, using current YEARLY rate.
thow to do these objects
plz assist me
and how to transfer the data from from one server to other like 3.1 to 5.0
plz assist me
Edited by: Alvaro Tejada Galindo on Feb 21, 2008 5:28 PM

Hi,
You can use Call Transcation tcode
for calling the transaction u can pass values to the transaction by using SET PARAMETER ID and GET PARAMETER ID
technique.
For downloading use function module LIST_DOWNLOAD
or GUI_DOWNLOAD.

How to set up a column link to the column attribute in a report

Hi All
I have 6 column in a sql report in a page, column names are (Devicename devicerole,from etc).
Now i need to set a link to this column and this need to link to the another page
Thanks & Regards
Srikkanth.M
Edited by: Srikkanth.M on Apr 6, 2011 6:17 PM

Hi
Read this and follow it...
>
Go to the report attributes, then click on the edit link button by the side of the column you want to be a link to get to the column attributes.
>
So...
1. Go to edit the page that contains your report.
2. Click on the report region as if you were going to edit the report query.
3. Click the Report Attributes tab.
4. Click the button at the side of the column in question.
5. Scroll down to the Column Link section and fill in the details.
I really can't put it much more simply than that...
Cheers
Ben

Questionnare link to the Exernal candidate on the HRRCF_CS_EXA_QUESTIONNAIR

Similar Messages

Maybe you are looking for