Questions about 1003051 - TDMS 3.0 corrections - Composite SAP Note

Experts:
We, from a big SAP shop, want to set up TDMS for ERP, BI, HCM and CRM.
We have some questions about note 1003051:
1) Is this note about ERP (and HCM) only? If so, what are the notes for TDMS on BI and CRM?
2) Should we apply this note to all systems involved: sender, controller (SM7.0 in our case) and receiver?
3) We have enhp1...enhp4 in our ERP (and HCM), enhp1 on BI and perhaps enhp1 on CRM (not sure yet).
a) What is the impact of enhp on TDMS?
b) should we install TDMS before applying enhp OR the sequence does not matter?
Thanks for your help!

1) Is this note about ERP (and HCM) only? If so, what are the notes for TDMS on BI and CRM?
>This is a composite note, and contains information about various other notes related to TDMS. Refer to each note mentioned in this note individually to assess the same.
2) Should we apply this note to all systems involved: sender, controller (SM7.0 in our case) and receiver?
>Depends from note to note, Each note contains the necessary information about the system it has to be installed on.
3) We have enhp1...enhp4 in our ERP (and HCM), enhp1 on BI and perhaps enhp1 on CRM (not sure yet).
a) What is the impact of enhp on TDMS?
>TDMS in standard supports Basis 7.0 systems. However it generally works fine with 7.01 too.
b) should we install TDMS before applying enhp OR the sequence does not matter?
>As TDMS 3.0 is only available for systems with basis 4.6C to 7.0. So install TDMS first and then the EHP.
I hope these answers help.
Regards
Pankaj.

Similar Messages

Composite SAP Note 1261193 : HCM Authorizations Documentation

Hi Team,
For what it's worth, I have consolidated all the relevant Support notes, in the field of HCM authorizations, during my project involvements.
Composite SAP Note 1261193 : HCM Authorizations Documentation
Symptom
You would like to have a consolidated view of must read OSS notes when
deealing with HCM Authorizations. This list is not exhaustive and
contains useful notes. It is provided as a courtesy.
Other terms
HCM Authorizations Security Personnel Administration Personnel
Development
Reason and Prerequisites
Documentation.
Solution
Read the documentation listed in this note.
Attend standard SAP class HR940 - SAP HCM Authorizations for HCM for
hands-on experience.
List of related transaction codes for HCM Authorizations (non
exhaustive, for information purpose only) is also included.
Let me know if you have other notes to add.
Keep up the good work,
Cheers,
Martin

Thanks Sergio
Thanks for the reminder, I had already the WIKIs under my radar, Marcio amongst other people has done a great job.
Plus I provide the WIKI [http://wiki.sdn.sap.com/wiki/display/ERPHCM/XSSHCMSelfServicesDocumentation |http://wiki.sdn.sap.com/wiki/display/ERPHCM/XSSHCMSelfServicesDocumentation] in order to introduce this consolidated XSS note.
Keep up the good work.
Br,
Martin

A question about restoring from cold backup(control file backup not clear)

Hi,
I had another question about restoring the cold backup. My database is in noarchivelog mode and after taking a consistent cold backup, all I need to do is to restore the backup right? -Why I got this question is because: when I backup my control file to trace, I see statements like this:-----
-- Commands to re-create incarnation table
-- Below log names MUST be changed to existing filenames on
-- disk. Any one log file from each branch can be used to
-- re-create incarnation records.
-- ALTER DATABASE REGISTER LOGFILE '/uo1/app1/arch1_1_647102958.dbf';
-- Recovery is required if any of the datafiles are restored backups,
-- or if the last shutdown was not normal or immediate.
RECOVER DATABASE
-- Database can now be opened normally.
ALTER DATABASE OPEN;
My database is in noarchivelog mode now so don't know why these statements (of register the logfile) is there in the backup of control file? so when I restore the cold backup of this database, it will still work correct? (there is no logfile I have only CRD files in cold backup -no archive log files.)
thanks
Nirav

Thanks for your inputs! It is most useful to me.
Regards
Nirav

Question about using Forms in a special project or not

Hi,
We have a project which must be available via internet. The estimated users of this application, in worth case, can be something about 2000. All users belong to a company but are distributed around the country.
All the development team in our company know Forms Builder (up to 10g) and have several years experience in using that in different projects. Two of our developers know APEX and non of us knows java and ADF.
My question is that is it really possible to develop such an application using Forms? Can we just use APEX for that? or we have to jump into Jdeveloper and ADF? Please look at the problem from all aspects if you would like to guide me. What i mean is that if you say we have to use java and ADF, then learning of these is a seperate project itself and we don't have a large time window for project. The budjet of project is also a serious thing.
Thanks in advance,
Alireza Vali

2000 concurrent sessions...now that would require quite a big application server farm if you are using forms for this project. As you have experience in PL/SQL and none in Java/ADF the decision shouldn't be that hard. Java is an Object Oriented language whereas PL/SQL is procedural which means quite different ways of doing things when you e.g. want to write APIs. If you don't have any expierience in any Object Oriented language starting off with a quite big project in java might not be a good idea. This doesn't mean that you shouldn't learn java at all, but when learning a new language you usually start with a "Hello World" application, and not with writing a operating system with that language.
APEX on the other hand is plain PL/SQL and not just for small websites; a good sample is the asktom site; it is written in APEX and I guess it has a fair amount of traffic.
So APEX has some benefits
- you have already knowledge in house
- you are familiar with the language
- APEX doesn't require an application server license; you can use oracle XE and if you don't want to expose the database to the www use a plain apache server to handle the http request
So if it were me, APEX would be the way to go.
cheers

Group Policy question about setting Start menu items using devices and not users

I am using Windows Server 2003 and Windows Server 2008 R2 servers set up for use as Active Directory Servers.
What I am trying to do is lock down thin clients start menu options and I have been able to get this to work down to the user level. However, what I want to do is have it locked down on the machine level.
We have multiple users that use both "Thin Clients" with Windows 7 Embedded and we also have them using other PC's with using the same log in.
So, for example when you create an OU for "Thin Clients", I want thin client devices in there and when people log in to these thin clients then the start menu will be locked down. I want this to be user independent and thus I don't want Users
in the OU, but I want to lock down the start menu.
How can I do this with Group Policy Objects on a domain level?

Hi,
you could achieve this using GPO loopback processing. It was designed for the purpose of applying settings from user GPO to a certain group of computers.
http://technet.microsoft.com/en-us/library/cc978513.aspx
MCP/MCSA/MCTS/MCITP

Composite SAP Note containing important Workflow transactions

Hello all,
I am trying to create a "Workflow Administrator" role, while simultaneously limiting some existing roles that incorrectly contain workflow t-codes. Is there a SAP Note or other documentation that contain a list of the most relevant t-codes for SAP Business Workflow? Such as SWU3, etc?
I checked the FAQ and wiki for workflow and didn't find anything concerning this.
Any help would be greatly appreciated.
Thanks.

Hi,
Found this link in SAP Help document.
[WorkflowAdministration|http://help.sap.com/saphelp_nw2004s/helpdata/en/8c/1923ce932b11d2a5ea0060087a79ea/content.htm]
Hope it helps.
Regards,
Raj

Question about Id3-tags and song managem

Hello, I am getting ready to buy a Zen Touch 20GB in a couple of weeks and I have a few questions about the management software.
(Correct me if I am wrong about something)
) Are songs organized into groups by Genre instead of just folders like on the Ipod?
2) Are Id3-tags used instead of filename for identification?
3) What parts of the tag are needed besides title and artist?
4) Which version of tags does the Zen Touch recognize: Version or Version 2?
5) If I edit my tags using an external program such as Id3-TagIT, will the tags carry over to the Creative software and to the player?
Thanks a lot for your help. I want to make sure I have my music collection in order before I get my Zen Touch.

euph_jay wrote:Ok, so lets say I have all my music in folders right now seperated into different categories on my hard dri've. Some folders denote the artist, some the album, and some a genre. Example: Folder: Chicago Contents: Chicago .mp3 files Folder: Techno Contents: various Techno artist's songs What is the best way of organizing my folder system, so that the transition will be easy to the player?
Folders are pretty much irrelevant. What the software will do is look at the *tags* in the files and then use these to build the player's library.
Will imbedded folders work on the player? (like Techno->Crystal Method->Cystal Method .mp3's)
Again the player has no concept of folders, although if you set Techno as a Genre tag you will be able to view via this in the Music Library.
Or, am I misunderstanding how music is stored into the mp3 player. Instead of storing music in a "folder like" system (like the Chicago folder or Techno folder), does it store all the songs individually on the device? Then you have to sort it by artist, album, or genre?
Using your example, in the Music Library you have essentially three categories: Album, Artist, and Genre. So under Album you would see "Vegas" (the Crystal Method's album), under Artist you would see "The Crystal Method", and under Genre you would see "Techno" (and then either the album or artist under this... I forget which it is offhand).
Make sense?

Question about OMSF transaction

Hi,
Is it possible change Material Group description with this transaction in a massive mode ?
If I can't use this transaction, Is there an other way ?
The system is an ECC 6 (not retail system ... I can't use transacvtion WG22).
Are there
Thanks a lot
Ivan

Hi,
Do refer the below OSS Note, which explains different FAQ'S on material group changes.
359940 - FAQ: How do I maintain material groups?
Check the below OSS Note which explains how to activate the T-code WG21 and WG22 in standard system.
863907 - Composite SAP Note: Maintaining material groups

2 question about GPU and Lens correction ,cs5

Hi
i have 2 questions about Gpu and lens correction in Cs5
1)Filter->lens correction->search online
i get often and almost every connection time out at the first click on search online , at the second click i get no online profile
is it normal?
2) question is about Gpu
it run faster , but talking about ajustament layer
like saturation or vibrance for example
i found with the gpu on , a light slow refresh compared with gpu off
i have set cache levels 6 ,history 20
i guess are the defaul
well i add a saturation layer and move the saturation slide ,increase o decrease saturation
with Gpu Off , the changes are immedially , i mean i can see in real time the increase o decrease of saturation
with Gpu On it takes a few(very few) time more
again is normal ?
don't be angry , i'm going to buy cs5 and i'm unsecure ... the price make a big role
thanks

For what it's worth, I also see a timeout on the first [ Search Online ] click, after about half a minute delay. Second click turns up results immediately. This happens each time Lens Correction is started, even without restarting Photoshop, and in both 32 and 64 bit versions. Also note that I started with one profile listed by default (though from the wrong camera) for my 40D with 28-135 zoom.
I alsow noticed that I was seeing progress bar activity in the Lens Correction dialog while I was typing this (even though Lens Correction was NOT the active window) every time I hit the 'L' key. Strange.
Windows 7 x64.
-Noel

Questions about TDM mode on an iMac

Hi!
I'm thinking about buying 2009-2010 27" iMac, it should replace my home server, display and audio system.
Primarily, I will use it in TDM mode, and have some questions about it.
Firstly, what about sound? iMac receives it over Mini DP, right? And if I'll connect HDMI device to iMac (PS3, looking forward to Xbox One, and MacBook Air over hdmi adapter), sound will be played over desktop's speakers, as it should?
Second, and most interesting part: if connection scheme is MacBook Air->Mini DP to HDMI adapter->HDMI cable->HDMI splitter->HDMI to Mini DP cable->iMac in TDM, everything will work fine?
Also interested about cables. For example, this cable http://dx.com/p/cy-dp-021-mini-displayport-to-hdmi-audio-extender-cable-white-1- 8m-177527 supports up to 1920x1200, but basically, both DP 1.2 and HDMI 1.3b supports 2560x1600. Should I look for another cable or this one will support 2560x1440 resolution?)

Beta software is always a risk. Some beta releases are close to finished status and quite polished and bug-free, while others have significant and often crippling bugs. Not that software in official release may not also have problems, but the entire point of beta releases is to identify bugs prior to an official release, so bugs are much more likely. Sometimes you won't encounter any problems, but other beta software may take your machine down completely; it all depends on what the software is intended to do, how skilled the programmers are, and where in the beta cycle the software may be. A "public preview" release from a major developer such as Microsoft, Apple, or Mozilla is less likely to have major problems, but it's no guarantee.
It's always wise to be very cautious about using any beta software, and to take extra precautions, particularly making backups much more often and preferably not using your main computer, when running any beta software. I would recommend never, repeat never, running beta software on any computer on which you depend on a daily basis for work or critical schoolwork. If you must, make a clone of your entire hard drive to another volume before installing any beta, so you can recover your system in case of major problems.
Message was edited by: Dave Sawyer

Another beginner question about targeting functions

I've read what I thought was an excellent thread about scope in EA, but I'm still not getting some of the basics (btw the thread was http://forums.adobe.com/message/5287753#5287753).
I have "slides" in the symbol library and in the main composition compositionReady script I've set up a generic script for playing back sound. That script works fine when I bind it within the compositionReady script to a symbol and click, so I know the funciton itself is fine. My question, I'm programmatically loading the slides from the library as I go along and want to use the generic function I created in the compositionReady script, but I can't seem to create the proper syntax to call the script. Here's some that I have tried. What is the correct syntax? The script is on frame inside the slide symbol.
//sym.getComposition().getStage().playSound();
//sym.getComposition().playSound();
//Edge.getComposition("CER_1").playSound();

Thanks for having a look. Yea, it's getting to the script fine but it doesn't like the syntax. Console always indicates javascript error, which is what happens when Edge throws an exception because it doesn't know what to do. The article that Elaine posted on above gives me the sense that it might be best to change the function to a variable, then it would be in scope to call but I have parameters I'd like to pass with it and I don't think I can pass a parameter with to a variabalized (word?) function. I know it's just me moving from ActionScript to Edge JavaScript and scope. Whereas I could always find a homebase in ActionScript with the stage, it seems that the stage in Edge is just another symbol and calling a function within the stage is never getting there. Elaine hints at putting outside the stage closure and it would be accessible, which, of course, has led me to start readying JavaScript books and learning more about scope etc. It seems like that is life as a developer. I dont' get that, oh, better take a day or two to understand that concept, oh, that function works now, next problem. ;-)

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

Two questions about Risk Management 2.0

hi experts,
Please find below two questions about Risk Management:
-In SPRO, Risk Management>Create top node: after completing information and executing I have this error:
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/ORM/SAPLORM_API_SERVICES " in
include "/ORM/LORM_API_SERVICESU10 " in
line 97:
"Bei PERFORM bzw. CALL FUNCTION "GET_ORGUNIT_THRESHOLDS" ist der Aktual"
"parameter "I_ORGUNIT_ID" zum Formalparameter "IV_ORGUNIT_ID" inkompati"
"bel."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "/ORM/ORM_CREATE_TOP_NODES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Do you know where it could come from?
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links?
Thank you !
Regards,
Julien

Hi Julien ,
I have the same error what u described as :-
-On the Portal>Risk Management
when I click in a link under the risk management menu(activities and risks, risk report, document risk,...) i alway have an internal server error:
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Do we have to set up some customizing points before accessing these links? "
Are you able to solve this. Please let me know how to resolve this???
Thanks
Regards,
Atul

Questions about using a PDF form online

I have a client who wants to create an online version of a PDF form that they are currently using. I am currently trying to explain to them that this would be best done as an HTML web form, but I may not win this argument. I have only used PDFs for printed forms (either hand-written or using form fields) so I am not familiar with any problems that converting the form for use online would entail.
When the 'Submit' button is pressed on the form, is there a way to redirect to another web page after the data is submitted? (i.e. does the PDF have access to it's outer 'environment'?)
Are there any security issues submitting data using the PDF form as opposed to using a standard web form? (There may be sensitive data being submitted)
I'm not sure how they plan to handle the data that is submitted, but there are several options in the submitForm parameters - I am assuming that using the HTML option would submit the data in the same format as a web form would. Am I correct here?
Can the PDF be prevented from being downloaded or printed? This form should only be used to submit data to their server, not as a printed form.
Are there any other 'gotchas' that I need to look out for? Does anyone have a recommendation for a site which contains any tutorials or guidelines for using PDF forms online?

Thanks for the information.
Yes, I agree that there is less reason for it to be a PDF form (Actually, no real reason other than the original form already exists in PDF), but I am unfortunately in the position that my input in this project is not necessarily being considered (my company is following direct -and inconsistent- directions from the client, and I have no contact with the client to ask questions about what their actual needs are). I have been told to give the client the 'Tomato' that they are asking for, even though they are describing an 'Apple'.
The reason this form is not meant to be printed is that we have replaced the 'Signature' fields from the original form with checkboxes that the user must check to confirm they have 'signed' the document. If they are to print/fax/whatever the document, they should use the original form, not this one. And I am still trying to explain to them that this would be better served with an HTML web form, but I fear I am losing that battle.
I have brought up the fact that it is not 100% guaranteed that Acrobat will be available in the browser, although I can only guess that it is less than likely that anyone will not have some sort of PDF viewer available to their browser.
I will also mention that issues may arise if the file is not submitted from within the browser.

Questions about mac mini iTunes server, streaming to macbook pro, ipads, etc.

I'm thinking about getting a mac mini to work with my NAS as a iTunes server. I have a bunch of questions about this. I will have two iPhones, a few iPads, and a laptop that will be accessing the files. I have iTunes match. This is basically to keep an always on computer for hosting the music/movies. My questions are as follows . . .
#1 Are there any good, comprehensive guides to show you how to do this?
#2 Can the movies be accessed when not at home on the shared network?
#3 Can the iPads or the macbook pro download the shared movies to be stored locally?
#4 Back to #3, how will it work on my macbook pro with listening to music (I have iTunes match)? Say i go to library and I break out my macbook pro and I don't have internet. What happens if I download music while at home onto my macbook pro to listen to it when I go to the library? Will i start a new library on my macbook pro? How will that mesh with the home server when I come back.
#5 Is there a way to mirror files or folders? So something that I have on my macbook pro will also mirror on the home server.
Thanks for your help on this. I'll post any follow up questions.

seanfenton wrote:
1. I want to replace the Optical drive with a 2TB SATA. can I use this 2.5 inch?
I do not know if it is the same model number, but this one will work in your MBP:
http://eshop.macsales.com/item/SEAGATE%20OWC/ST2000LM003M/
2. I want to replace the HD with a 128GB SSD 840. When I replace these drives, will my OS still be in tact? I have never done this job before.
No. You will have to format the drives in Disk Utility>Erase to Mac OS Extended (Journaled) and then install the OSX by using the original install disks.
3.) I want to replace the ram sticks to max capacity. This is 2 2GB sticks, Correct?
No. An early 17" 2008 MBP will accept 6GB RAM with the following specifications: 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM. The best sources of Mac compatible RAM are OWC and Crucial.
4.) Most difficult...
I want to extend the monitor wirelessly to a projector. I thought about using Apple TV and Airplay. However, support for airplay is for MacBooks 2011 and newer. I thought of using a PS3 and the media server, but I think this brings on a format compatibility issue. (my library is so large I could not afford to convert all my movies to MP4.) So, how would you recommend I put my extended monitor with VLC player onto a projector?
Could I possibly connect the MBP to a Mac Mini as an extension? would this work natively? I would rather use a VGA cord than F with 3rd party app BS.
Cannot help you there.
5..) I want to Bypass iTunes this time around. I would prefer to use Finder and VLC to manage all of my music. I mostly play all my music on shuffle, so, could I create a playlist on VLC with all of my music and play it randomly? (im sure this is possible but i'd like to organize all my plans with confirmation.)
You are not obligated to use iTunes.
6.) Can i upgrade the keyboard to backlit? i've read that this is possible.
All MBPs have back lighted keyboards. Your either needs a NVRAM reset or a repair.
Ciao.

Questions about 1003051 - TDMS 3.0 corrections - Composite SAP Note

Similar Messages

Maybe you are looking for