Questions about AirPort Express and Extreme!

I have BT Infinty and the hub is situated in the living room. What I want to do is extend the wi fi to my room which is around 10 metres away.
Are you able to connect the AirPort Express to the network and then create a network for the AirPort Express for my MacBook Pro to connect to?
I have two options and questions
1. Buy a AirPort Extreme and replace my BT hub with that. Then use an AirPort Express to extend the wi fi. But when you extend the wi fi does it mean that when I search for a wireless hotspot from my Mac I connect the the AirPort Express? Or is there a way of making the AirPort express to have a different name?
2. Use my Bt hub and buy a AirPort Express and connect it to my Infinty Connection. BUT is there a way of making a hotspot for the AirPort Express for example
my Infinity connection is named Bt-Infinty2356
I use the AirPort express to connect it and extend the wifi
THEN is it possible to make a hotspot named "AirPort-Express-Muppet" for me to connect from my Mac?
Thanks

I have no experience with the "BT Infinity Modem" and "BT HomeHub", but I assume that they are two separate units?
If yes: connect the modem direct to the Extreme by ethernet cable.
If it is a "combined" unit: connect the Extreme by ethernet cable to one of the ethernet slots on the hub.
In both cases set the Extreme to "Create a wireless network".
Use a Airport Express to "extend a Wireless Network", and extend the Extreme.
Do not expect the Airport Express to extend the BT hub wireless network, because it will not work.
In both cases you have two wireless networks: one from the Hub and one from the Extreme.
Off the record: I have the same situation in France with the "Livebox" (Orange) that is connected to a Netgear WiFi router: two network: the Livebox is just that, the Netgear is "relayed" through Netgear Routers (Switches) to five areas in the "house". The same in Switzerland, but there I used Extreme and Express units instead of the netgear units.
The Hiome Hub should work fine connected to the modem by cable, and the other network also by connected to the cable. Do not mix the different brands: trouble.

Similar Messages

Differences between AirPort Express and Extreme?

What are they differences between AirPort Express and Extreme?

You can find all the differences between the AirPort Express and Extreme in this website > http://www.apple.com/compare-wifi-models/

Problems with Airport Express and Extreme

I have tried to set up Airport Express and Extreme. Both proceeded normally in the Air Port Utility until the final stages. Then it said it couldn't find the devices. When I tried again (many times), I couldn't even start the process, even though it did that the first time for both. I'm stumped.

To set up the 802.11n AirPort Extreme Base Station (AEBSn) as a bridge, either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBSn, and then, using the AirPort Utility, make these settings:
AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection tab
Connection Sharing: Off (Bridge Mode)
Click Update to apply the new settings
AirPort Express Base Station (AX) - iTunes Setup
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <existing AEBSn's wireless network>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
Verify Password: <re-enter the existing wireless network password>
AirPort Utility > Select the AX > Manual Setup >Music
Enable AirPlay (checked)
iTunes Speaker Name: <enter desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings to the AX

Any software differences between new airport express and extreme?

I was wondering if there are any features or configuration differences between the two, such as configuring VPN passthrough.
The only difference I can see is using the USB for hard drive use.
Also, do you think the performance will be similar. I know the time capsule actually rated slower than the extreme even though they use similar hardware.

You can find all the differences between the AirPort Express and Extreme in this website > http://www.apple.com/compare-wifi-models/

Question about Airport Express used as a "network extender"

Hi... I have an Airport Extreme 802.11n that acts as the Base Station for my home network. I then have an Airport Express located elsewhere in our home that is set up to "Extend a wireless network".. We need it to give us better power coverage throughout our house... It seems to work fine... My wife usually runs her laptop in a distant part of the house and her computer connects wirelessly to the Airport Express and then from there to the Airport Extreme that talks to the rest of the world...
My question is related to a new Panasonic Wireless camera I just bought... This is not the first of these cameras I have deployed and each one has been a bit of an adventure... After a short time I got this new camera set up wirelessly near the Airport Extreme 802.11... So far so good... But then I moved it out near the Airport Express extender and it connects nicely to the extender just like my wife's computer does (I see this by looking at the wireless clients and I see the camera listed by its MAC address)... However, when I then try to connect to the camera by opening its web page, it won't connect... Once I noticed that it DID connect but only after a very long time and the page itself opened slowly and on inspection of the Airport Utility I noticed that it had connected to BOTH the extender (at good power) and the Base station (at very low power and thus the slow load)... But even though it shows it is attached to the extender just like my wife's computer connects to the extender, still I can't open its web page when the camera is attached exclusively to the extender... I admit to not being an expert on router or, for that matter, network camera settings so I thought I would drop in here and ask if anyone has any suggestions... Any ideas??? thanks.. bob...

Thanks for the feedback.. I have wondered before if "extend network" is equivalent to acting as a "bridge" and I think you are saying yes... thanks for that...
As if struck by a lightning bolt, sometime after I wrote my original post, the Panasonic camera soon after started behaving precisely as I would have expected... It is no longer attaching to both the extender and the base station. It is instead ONLY attaching to the extender now (which it is physically very near) and I can connect to it from a web browser quickly and repeatedly... And what did I do to make this happen??? Not a danged thing but let time pass... That's been my experience with these cameras in the past... As I said, always somewhat of an adventure to get them set up but once you do so, I have two others running now for a few years with no problems,,, Thanks for your help... bob..

Airport Express and Extreme both having timeout issues once every few days.

I have both an Airport Express and an Airport Extreme in the house (one on each side of the house), and for the last few months, we have been experiencing timeout issues with both. About once every few days, my computer (or any other computer here - all Macs) will lose connection to the hub. When I try to reconnect in the Wifi menu, it says "Connection timed out". Also, on my iPhone, when I try to connect, it says "Unable to connect".
All this takes is a quick restart of the Airport (just pull the power out and plug in), but this is VERY frustrating. I've updated to the latest firmware... I'm not sure what else to do.
Any ideas?

Ok, thanks for clarifying that for me. I suggest starting by reviewing the following AirPort User Tip around the details for best base station placement. Let's see if this will help increase the bandwidth performance of your extended network. Most likely, due to combination of distance and Wi-Fi interference, you may not be getting the best bandwidth possible. Please post back your results.

3 powerline adaptors with airport express and extreme

Hi all,
I am currently using two airport express and 2 TP-LINK powerline adaptors to create a "roaming" network, however i would like to add another powerline adaptor and an airport extreme to my network.
Modem -> Airport Extreme in the living room with an ethernet cable plugged into the powerline
1st Airport Express plugged into the 2nd powerline adaptor
3rd Airport Express plugged into the 3rd powerline adaptor
so my question is will the above setup work? or do i need to connect another powerline adaptor into the main Airport Extreme making the whole network use a total of 4 powerline adaptors? however if only a total of 3 powerline adaptors are required, would the network be confused and render the whole network useless?

To set up the 802.11n AirPort Extreme Base Station (AEBSn) as a bridge, either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBSn, and then, using the AirPort Utility, make these settings:
AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection tab
Connection Sharing: Off (Bridge Mode)
Click Update to apply the new settings
AirPort Express Base Station (AX) - iTunes Setup
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <existing AEBSn's wireless network>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
Verify Password: <re-enter the existing wireless network password>
AirPort Utility > Select the AX > Manual Setup >Music
Enable AirPlay (checked)
iTunes Speaker Name: <enter desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings to the AX

Using Airport Express and Extreme Together

I have the old Airport Express and have just bought the latest Extreme. I'm sure Extreme will work fine with my iMac but am not so sure it will work with my G4 Powerbook as it does not have the recommended software requirements. Is there anyway I can setup a network using both the old Express and the new Extreme?

Welcome to the discussions!
Your old AirPort Express is a "g" wireless device while your new AirPort Extreme is a newer and much faster "n" wireless device.
If you are asking if you can use your old AirPort Express to "extend" the wireless from the AirPort Extreme using wireless only, the answer is yes....BUT....your new AirPort Extreme will drop down to old "g" wireless levels if you do this.
The setup procedure for this is quite difficult and frustrating for many users. To get an idea of what is involved if you want to try this, see this link for the procedure:
http://discussions.apple.com/thread.jspa?threadID=2355832&tstart=0
IF...you are able to connect the AirPort Express to your AirPort Extreme using an ethernet connection, the setup will be much easier to accomplish and your AirPort Extreme will maintain faster "n" speeds on the wireless. Post back for more details if that is a possibility.

What are the main differences between airport express and extreme?

what are the main differences between the express and extreme base stations.

In addition to Bob Timmons' link the main differences are as follows:
Extreme has a slightly more powerful antenna (might not be true but from experience it seems to be)
Extreme has USB HDD sharing
Express has AirPlay
Extreme has 3 Gigabit ports (don't be confused by Apple's page. Apple states 4 including WAN, 3 without WAN)
Express is smaller
Express has 10/100 Ethernet whereas Extreme has Gigabit

Question about airport express/extreme and printing

Hopefully this question will make sense... I currently have my computer hooked up to Airport Extreme wirelessly. That is the network in my house. I want to buy a large format Epson printer and it needs to be somewhere else in the house and cannot be plugged in to the Extreme.
If I purchase the printer and plug it into an Airport Express that is plugged into an outlet can I switch back and forth between wi-fi connections to print wirelessly?
Thanks for any help.
Stephanie

If you receive a signal strong enough to use your computer wirelessly upstairs, you won't have any problem (I don't think) with your printer. I just got a Wi-Fi printer and it just seamlessly becomes part of your network same as adding any Wi Fi enabled device (I have 2 roku's for streaming Netflix etc and it all works great). BTW, my printer is a Canon MP 495 and so far I really like it. And, for a very inexpensive photo printer, (+AIO- copier, scanner, which I like, I paid around $45 on Amazon when it was on sale). The set-up instructions for Mac were not very coherent, but if you know what you are doing when it comes to adding hardware and working with your network, you can do it without the poorly written instructions. Also, the web site is not that great for help forums or shopping for ink, etc. Amazon is one of the best overall resources with lots of customer reviews, etc. Good luck!

Two Questions about Airport Express

All, I am a recent convert to using a Mac so bear with me.
I have two questions about the Airport Express.
Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
Any help and advice gratefully received.

Tesserax wrote:
Hello andixbox. Welcome to the Apple Discussions!
Question if I buy one in the USA, I will visiting this week on holiday,can I use it the UK with a UK adaptor/apple plug?
Yes, but at least two things to consider:
o The US version of the 802.11n AirPort Express Base Station (AXn) only supports radio channels 1-11 in the 802.11g radio mode. Channels 12-14, used in other countries outside the US will not be available.
o The AXn supports both the 2.4 and 5 GHz radio bands for 802.11n. The 5 GHz band is restricted in certain countries (like the UK) so operating in this mode may get you unwanted attention.
That should be okay then because the Netgear broadcasts on channels 1-11. I hadn't appreciated the 5 Ghz band, but having checked both US and UK Apple sites the techspecs both mention 2.4 Ghz and 5 Ghz.
Can the Express be used with my current wireless network, using a Netgear DG834G V4, I have read lots in the forums about putting a $ sign in front of the WPA password?
If your intent is to have the AXn join the Netgear as a wireless client, then yes it should work. The "$" requirement was for WEP. This shouldn't be necessary for WPA or WPA2.
I intended to use the AXn as an range extender, but you mention wireless client, is that something different?

Airport Express and Extreme drop out

Hi,
I have a Airport express that is wired to my router. This is downstairs.
Upstairs i have a Airport Extreme which is wirelessly connected to the airport downstairs.
The Express is set to create a new wireless and the extreme is set to extend.
For some reason or another when im upstairs, which means i'll probably be connected to the extreme, i sometimes find that i cannon connect to the internet. When i go into Airport Utility it can only see the Extreme that's up stairs.
If i go downstairs it then allows me to connect to the internet.
Then go back upstairs and cannot get back on the net.
So i have to disconnect the power to the express and then the connection between the two airports is established.
Both are running the latest firmware, 7.6.
Can anyone help?
Thanks

I have Sunrocket and the same situation. However the last week has had about 90% use... no problems.
I was having people completely unable to understand me. All of a sudden the stuff started working but it still isn't perfect. I can only guess that the AEBS is not liking the setup or otherwise being interfered with. I DO have 2.4GHz phones but the brand was checked out as working fine with AEBS.
My setup Comcast Cable Internet>AEBS>Sunrocket's Gizmo.
I'd love to hear form other Mac/AEBS users and Sunrocket.

Panasonic BL-C131 wireless doesn't work with Airport Express and Extreme

I have Airport Express to create a wireless network, and an Airport Extreme to extend the wireless network. When I connect the LAN cable on Extreme and the Panasonic BL-C131, the camera can successfully detect IP and work fine. However, when I remove the cable and switch the camera to wireless mode, it can never detect the IP. I've read somewhere in the camera manual that it needs a UPnP enabled router to have wireless work. I am wondering if there is any way to confirm, since I know Airport only support Bonjour.
I really like to keep the Airport at home, or I'll need to replace it with a D-link router.

Issue solved

Weird semi-loss of AirPort Express and Extreme

I have an odd symptom where, when I launch iTunes, my AirPort Express is sometimes listed is not available from my Power Mac G% (running 10.4.8).
When I launch AirPort Admin Utility, NONE OF MY AIRPORTS (either Extreme or Express) are listed. Rescanning or selecting Other does not solve this.
What is odd is (1) The AirPort menu still shows me connected to my AirPort network and indeed I still have Web access etc. and (2) If I launch AirPort Admin Utility from my MacBook Pro, it shows all the AirPorts correctly (so the problem seems limited to my G5 rather than the AirPort devices).
If I restart my Power Mac G5, the problem goes away and all works well again- for a day or so - and then it returns.
What can I do to permanently eliminate this annoying symptom?

1.) Since the Airport Express is extending the Extreme Network, will my whole network now be single radio only network, since the Express only has one radio?
Although, your AirPort Express is 802.11n, it is not simultaneous dual-band. That means it can either extend the AirPort Extreme Base Station (AEBSn) 2.4 GHz or 5 GHz radio but not both at the same time. So the AEBSn will still be broadcasting on both the 5 GHz (for 802.11a/n) and on 2.4 GHz (for 802.11b/g/n).
2.) What if both an 802.11g and 802.11n device connect to the Express' radio instead of the Extreme's for some reason, will this make both devices operate at 2.4GHz?
Yes.
3.) What if an 802.11g device connects to the Airport Express' radio. Since this is now 2.4GHz, will it only now communicate with the Airport Extreme at 2.4GHz?
Assuming that you configured the AXn to extend the AEBSn's 2.4 GHz radio, it will only be able to communicate back to the AEBSn on its 2.4 GHz radio.

Itunes remote speaker using Airport Express and Extreme

I have purchased an Airport Extreme and Airport Express, so I can listen Itunes music on my stereo system. For some reason, there is simply no remote speaker selection button on the bottom right of the Itunes windows. Does it has to do with the fact that I am using an old Mac OS X?
My Macmini has no airport card, so I connected the ethernet to the Airport extreme, and plugged the Airport express few feet from the base. Nothing but an orange tilting light comes out of the little box. I can surf the net perfectly but the Itunes is ignoring all my investment on the couple of Airport boxes i purchase...What I am doing wrong?

Yes, I thought that purchasing the Airport extreme as
the ethernet interfase directly connected to the
MacMini, was almost the same as having the airport
card inside the Mini. Where did I get lost?? I have
the extreme directly to the mini, and an express
plugged somewhere close and nothing happens...
The problem is that the mini can only stream iTunes to an Airport Express via Airport. While you have connected it to an Airport basestation, as far as the mini is concerned, it is working via ethernet because that's how the data is leaving the system. It doesn't have an Airport card, thus it can't stream iTunes content to an Airport Express.

Questions about AirPort Express and Extreme!

Similar Messages

Maybe you are looking for