Questions about changing Firmware

Is this a good idea or can it wreck the phone also will it void my warrenty if i do it??

Judging by your question it is NOT a good idea, yes you can wreck your phone and you will void your warranty (however I think the guys at the nokia care center will put new firmware on it, but you'll have to pay for it). For what I've read, it can be done, but it doesn't sound like you're going to do it succesfully, or you wouldn't be asking this question here. Your phone is still in warranty, so you could just take it to a nokia care center and have the firmware updated if you want. That will not void your warranty and if something fails you'll get either a new firmware again, or if that fails too, I think they'll get you a new phone.

Similar Messages

  • Question about changing a Snow Leopard Server network settings

    We have an Xserve running Mac OS X Server 10.6.8, the primary services running on it are afp, smb, dhcp, dns, jabber and the calendar sever.
    Right now we have a router connecting two networks together, 192.168.0.0/24 and 192.168.1.0/24. The Xserve has a static IP address in the 192.168.0.0/24 range.
    In order to combine two phone systems into one I am required to combine the above networks, this will involve removing the router and changing the subnet mask on every device from 255.255.255.0 to 255.255.254.0, any device that is currently part of the 192.168.1.0/24 network will also need to have it's router setting changed from 192.168.1.1 to 192.168.0.1. That part should all be easy.
    However, this is my first experience expanding a network past a standard class C and am wondering if there is anything I need to watch for on my Snow Leopard Sever.
    Specifically I wonder about dhcp settings, right now there are two dhcp servers, the Xserve which provides dhcp for 192.168.0.0/24 and the router that provides dhcp for 192.168.1.0/24. Once the router is removed the Xserve will need to provide dhcp for the entire network.
    Looking at the Xserve dhcp configuration right now I have one subnet defined providing addresses 192.168.0.5 to 192.168.0.125.
    Can I simply click the + to add another subnet and add for instance a range of 192.168.1.5 to 192.168.1.125?
    Will it simply give out all of the ip addresses in the first range and then start with the 2nd? Or do I need to find a single range of ip addresses large enough to meet my needs? (e.g. 192.168.1.5 to 192.168.1.225 or something).
    Is there anythign else to watch for after making this type of network setting change?
    Thanks in advance.

    Thank you for your very detailed reply.
    I understand the problems that can arise using 192.168.0.x and 192.168.1.x and if this were a new project I would definitely switch to something else, however in this case we have been using these ip ranges for years (they were in use here long before I started) and I don't want to have to redo all of my dns settings at the same time I make these other changes so I'm going to stick with the same ip's we are using at least for now. Anyone here needing vpn access has already dealt with this issue but we  have very few vpn users so it has not been a major problem for us to date.
    My biggest question is about increasing the size of the dhcp pool. For instance, after I change all the network settings and set up a /23 network is it possible to have a single dhcp pool that includes some ip's in the 192.168.0.x range and others in the 192.168.1.x range? I guess what I am asking is when I am in Server Admin and click on DHCP one of the tabs across the top is "Subnets". Right now there is a single "subnet" configured that provides addresses from 192.168.0.5 to 192.168.0.125.
    Ideally I would like one dhcp pool that provides ip's in the range of 192.168.0.5 to 192.168.0.125 and then if all of those are used up, moves to 192.168.1.5 to 192.168.1.125. Can I do that by simply adding another "Subnet"  so there are two? Or do I have to find one larger single range? (e.g. 192.168.1.5 to 192.168.1.225?) You may have already answered this indicating I have to have a single larger range but I just want to be sure.
    The parts about changing subnet masks, and routers and all that I think I have a pretty good understanding of.
    Your last paragraph is something I have been worried about, I do have a feeling that after making this change there will probably be unforseen issues that will need to be resolved, I'm just hoping it is not too many. For the scope of this thread I will just focus on issues that may arise with the Snow Leopard Server however.
    Again, thank you for your help.

  • Questions about Micro-Firmware (Not 2.x.x

    Hi Guys,
    i got some questions about the .0.03 firmware.
    ) What's the difference between the :
    ZenMicro_PCFW_LB__0_03_PDE.exe ,57 MB 8 Feb 05.
    and the
    ZenMicro_PCFW_US__0_03_PDE.exe ,8 MB 08 Dec 04 ?
    Does "US" means that this is the north american version ?
    So what is LB ?
    2) I've got the "ZenMicro_PCFW_US__0_03_PDE.exe ,8 MB 08 Dec 04". Is there any use of upgrading to the one from 8 Feb 05 ?
    3) ZenMicro_PCFW_US__0_03_PDE.exe
    Does the "E" at the end means "european", so the loudness is reduced ? Must be something different because it's also included in the firmware from the american site.Message Edited by Baron on 02-20-2005 09:0 AM

    From what I've picked up elsewhere in the forum, the LB version of the .0.03 firmware just includes MORE LANGUAGES (for the user interface, i.e. menus) than the US version of that same firmware. see : http://forums.creative.com/creativel...essage.id=2374 ... which, really, you should have found using the search function, before posting. --Fred.
    /edit: linkified.
    Message Edited by fred_be9300 on 02-20-2005 06:48 PM

  • Question about changing values of a total by selecting a check box.

    OK, so what I did was create a form for my workplace that totals the value an employee's quality of work. what i want this form to do is: In one cell the total is a 100 point value. In one column i have a markable checkbox and in the column next to that there is a point value for that particular category. what i want is to be able to check a box next to category and have the corresponding point value deducted from the "100" total. for example if I check the box next a value of 40, then the 100 becomes a 60 automatically. I am new to numbers, and any spreadsheet app for that matter so any help would be greatly appreciated.

    Tommyboy29 wrote:
    Another question about my last post: numbers will only let me add 2 to 3 cells in the formula to change the "total" number of 100. is there a way to add more then 3 cells? i have 9 cells total that i want to have the ability to subtract from that same total?
    There is no such limit in Numbers. I'm guessing that you ran out of room in the formula edit line in the Formula Bar.
    Grab the double line and pull it down to expand the edit area.
    Jerry

  • Question about changing ID3 images

    Hey everyone. I recently changed my podcast artwork. I use Powerpress, so changing the MAIN artwork was quite easy. So for this question, I am referencing only the individual art that is displayed with each individual episode.
    I know that for iTunes to recognize a change in episode artwork, that it cannot have the same name as the previous. The new artwork embedded does have a new name but is it the artwork that needs a different name, or the entire mp3 that needs a new name? Once artwork becomes embedded as ID3 I'm not sure if it loses its name altogether. So I need to know specifically what needs a new name for iTunes to update my episode art? Pic name or mp3 name?
    Thanks for your time!

    Thanks for the response Roger.
    So just to be clear, I have changed the images embedded in my MP3s. I then re-uploaded them to Libsyn using the replace function. So I now have MP3s with the exact same name as before, but with a new image embedded. Are you saying iTunes will see the image change in each episode even though the name of my MP3 is exactly the same?
    So far, iTunes has immediately updated my main podcast image but all my individual episodes still have the old image.
    You can probably see what I'm talking about by searching iTunes for Netflix Junkies. You'll see that 'episodes' has different artwork than 'podcasts' in the search results. Do I just need to wait it out? Or rename my mp3s?
    Keep in mind, there is another podcast with the same name no artwork. This is not my podcast but someone else's.
    Thanks again!

  • Question about changes in currentRow

    Dear Community,
    In Creator 2004Q4 data tables you can use the "currentRow" in value binding expressions as currentRow['column']. Now with Creator 2, one must use currentRow.value['column']. I would like to know what else has changed about this. Can any of you explain or point me to the appropiate tutorial/article about the currentRow concept?
    Thank you in advance.
    Antonio.

    As far as I can recall, nothing besides the notation
    has changed. Under the covers, currentRow is a
    temporary request attribute used when iterating the
    rows of a table. As such, it can be used in binding
    expressions. We changed the notation when we
    introduced data providers. The new notation ensures
    when evaluating an expression that what you want is
    the value for the current row and the specified field
    key. (To get the value, the data provider's getValue
    method will be called.)Thank you for your answer. I have a more specific question:
    I'm using arrays of DTO (Data Transport Objects) with Tables. Everything wasf fine until I've had to deal with a DTO with a nested class, ie:
    public class MyHelperDTO {
      private String name;
      public String getName() {
        return name;
      public void setName(String name) {
        this.name = name;
    public class MyDTO {
      private Long id;
      public Long getId() {
        return id;
      public void setId(Long id) {
        this.id = id;
      private MyHelperDTO helpDTO;
      public MyHelperDTO getHelpDTO() {
        return this.helpDTO;
      public void setHelpDTO(MyHelperDTO helpDTO) {
         this.helpDTO = helpDTO;
    }It is possible to access the properties of the inner DTO from a currentRow, ie. currentRow.value['helpDTO'].value['name']? I've actually solved in another way, but I'm still curious about it.
    Thank you in advance.
    Antonio.

  • Question about changing a file type into another file type

    Hello. This isnt a java question but you guys have been so helpful in the past I hope its ok if I ask this question for a friend.
    How can I import a scriptware file into Screenwriter 2000, or change a .scw file into a .tag file?
    Anyone who can help thanks.

    I know nothing about scriptware or Screenwriter. But, my only advice is to see if Scriptware can export some other file type (not necessarily a .scw file) that Screenwriter can read. Sometimes, when I have two text editors whose native formats are incompatible (like opening a paper typed in a new version of Microsoft Word using an old version of WordPerfect or something), I save the file as an RTF file, rather than in the native format. Maybe something like that applies to your situation, too.
    Hope that helps.
    Jason

  • Question about changing TimeCode of media clip

    Hello,
    The short I'm working on was shot in 35mm, 24fps. First of all, some info about the project:
    - One-light transfer to BetaSP PAL (the dailies were sped up by 4% to match PAL's framerate), with burned in TC and keycodes
    - Made a dupe of the dailies in DVCam PAL with slave codes so that the DVCam's address track matches the burned in TC
    - Captured each lab reel as one long media clip into FCP (8 reels in total)
    - Creat subclips for each scene and for sync'ing audio.
    Everything worked out fine except for 1 lab reel. During the DVCam dupe, the TC jumped by 1 frame half way into the reel. So in the last half of this reel, the address track is 1 frame off (comparing to the burned in TC). Luckily, the TC jump didn't occur during any important scene.
    Since making another DVCam dupe was not an option (long story about working in Asia), I thought of a way around this. I divided this reel into 2 sections at the point where the TC jump occured. I created an Auxiliary Code for the section with the 'bad' TC so that the Aux Code matches the burned in TC.
    Now the rough cut is done. I need to export an EDL to re-telecine the neg for full grading.
    My question: is it a bad idea to do an EDL with both regular TC and Aux Codes? Or should I just change the TC on the 'bad' reel ?
    Sorry for the length explanation. Thanks in advance.
    G5 2.3GHz Dual Core, 4.5GB RAM, 2 500GB drives   Mac OS X (10.4.4)   Powerbook G4 on OS 10.3.9
    G5 2.3GHz Dual Core, 4.5GB RAM, 2 500GB drives   Mac OS X (10.4.4)   Powerbook G4 on OS 10.3.9
    G5 2.3GHz Dual Core, 4.5GB RAM, 2 500GB drives   Mac OS X (10.4.4)   Powerbook G4 on OS 10.3.9

    You're probably fine using the Aux TC in your EDL.
    In that case, should I create Aux TC for the lab reels with the correct TC as well (with the Aux TC being the same as the address track? That way the EDL would only deal with just the Aux TC rather than a mixture of regular TC and Aux TC.
    you could make a new DVCam PAL from your
    captured footage (restoring the matching TC with the
    burned in TC) and then recapture the media you used
    from the fixed section.
    I don't have access to a deck that allows preset TC. Would it be the same if I just change the TC on the bad section? I know that typically it's not advisable to change TC in media clips. But in this case, it's just the dailies, not the final media.
    TD

  • [SOLVED] Two Questions about b43-firmware AUR Package

    Hi. On my old laptop, my wifi adapter worked out-of-the-box / no extra driver installation required. On my new laptop I have the Broadcom BCM43228 wi-fi adapter. Up to this point I have just been using the proprietary broadcom-wl driver, which has worked fine but it has been annoying having to rebuild (that is: install latest linux-headers, run makepkg) and reinstall broadcom-wl every time the linux kernel is upgraded. I discovered that the open-source b43 firmware recently added support for the chip. So I have two questions...
    1. With b43, would I still need to rebuild/reinstall the package every time the kernel is upgraded?
    2. Is there any way to know if the linux kernel will integrate b43 some day? Is this something that happens? I'm assuming it must be because I didn't have to install anything extra to use the wi-fi adapter on my old laptop. Maybe there's some schedule online of when the linux kernel developers intend to integrate open-source drivers/firmware directly into the kernel?
    Thanks!
    Last edited by tony5429 (2015-03-02 23:25:58)

    tony5429 wrote:I discovered that the open-source b43 firmware recently added support for the chip.
    It's not firmware that added support, it's the driver.
    driver = code that runs in the kernel
    firmware = code that runs on the device itself
    tony5429 wrote:1. With b43, would I still need to rebuild/reinstall the package every time the kernel is upgraded?
    Nope, the firmware isn't tied to a particular kernel.
    tony5429 wrote:2. Is there any way to know if the linux kernel will integrate b43 some day?
    The kernel does have b43 integrated. What the package installs isn't the driver, it's the firmware that gets uploaded onto the wifi card.
    A lot of firmware is distributed in the linux-firmware package. However this requires that the firmware is released under a license that allows redistribution. But the b43 firmware isn't redistributable, that's why you need to get it from AUR.
    Last edited by Gusar (2015-02-08 21:22:33)

  • Question about changing frame rate from PAL to NTSC

    Hi,
    Usually, I would use JES Deinterlacer for changing the 25 fps of PAL into 29.97 NTSC.
    Recently I've started shooting with Sony's EX-3, full HD (in PAL mode)
    If I'm using JES Deinterlacer, the resolution would drop from 1920x1080 to 720x480 (adding 2 black rectangles to keep the 16:9 ratio)
    With the 720x480 res I would need to choose 4:3 aspect in iDVD.
    I'm somewhat confused here...Can I keep the original resolution of 1920x1080 and just use another software for changing the frame rate...then burn it with iDVD in widescreen 16:9? Is there anything like JES for that? Or does NTSC DVD means always 720x480?
    Thanks a lot!
    ymotion

    You could try doing it in compressor>advanced format conversions. Personally I like taking it to a terranex, but I also have had GREAT success with Graeme Nattress's standards converter. You can google it, or search this forum for a link. It's cheap, only a hundred bucks or so.
    1. Convert the footage pal to ntsc, no frame size change
    2. Open compressor and select the appropriate setting for the length of your video. And also add the dolby audio setting. Don't forget the anamorphic settings noted above.
    3. I don't remember anything at all about idvd, haven't used it since DVDSP came out. DVDSP allows you a whole host of display parameters and infinite customization for your projects. It'll only take you a couple of hours to figure it out, and those are hours well spent.

  • WRT54G2 v.1 router - question about upgrading firmware

    I posted this as a reply to another thread because I couldn't see how to start a new one - but finally figured it out so am posting it again.  Sorry about that. 
    I am having to unplug my router (WRT54G2 v.1.0.04) about 1-2 times a week.  When i plug it back in - it works again.  (I have the modem/router connected to my desktop and a laptop networked.)  Using Network Magic.
    Someone said I should update the firmware, but not sure which version to update to - the choices are 1.0, 1.3, 1.5.  I don't want to update to the wrong firmware - don't know if I should choose the latest or 1.3 first, then 1.5
    Can anyone help?
    Thanks.
    Carol

    For starters, check the bottom of the router to see what hardware version your router is. Then ONLY download the firmware for that particular hardware version of the router. If you have a version 1.0 router then select ONLY Version 1.0 from the Linksys/Cisco WRT54G2 download support page, do not select Version 1.3 or 1.5. Same goes for version 1.3, do not use the firmware for hardware versions 1.0 or 1.5. And for version 1.5, do not use the firmware for hardware versions 1.0 and 1.3.
    If your using a WRT54G2 V1 router the latest firmware is Ver.1.0.04 (Build 5). If this firmware is already loaded to the router it will be listed in the upper right hand corner of the administration pages, and will show up as "Firmware Version: 1.00.4".
    For hardware version 1.3 the latest firmware is Ver.1.3.00 Build 28.
    For hardware version 1.5 the latest firmware is Ver.1.5.01 Build 13.
    Unfortunately there are some bugs with the WRT54G2 routers with either the hardware or the firmware. I routinely have to power cycle/reboot mine from time to time when my wireless connection speed drops off (usually down to 1 Mps) and loading web pages crawls or pages times out. I tried loading the third party firmware by DD-WRT to the WRT54G2 but that too had issues, mainly the wireless speed would drop to 1 Mps and stay there until the router was rebooted/power cycled. Ended up dumping DD-WRT and putting the stock Linksys firmware back on this router and just power cycle the router every couple of days.
    It sometimes helps to do a 30/30/30 reset on the router and reconfigure from scratch.
    Hard Reset (aka 30/30/30 reset):
    The following procedure will clear out the NVRAM and set dd-wrt back to default values:
    With the unit powered on, press and hold the reset button on back of unit for 30 seconds
    Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
    Plug the unit back in STILL holding the reset button a final 30 seconds (please note that this step can put Asus devices into recovery mode...see note below!)

  • Questions about changing the graphic card

    Greetings I need to change the graphic card that came with my computer Pavilion 500-308nrit's GeForce GTX 745 4Gb with GeForce GTX 960now i have couble questions the graghic card that i'm going to buy has a bigger cooling system so is't going to fit inside the case?the GTX 960 require a minimum power supply with 400W so is't gonna be a problem if i changed the power supply?. and is there is a specific power supply that will work better with my PC? and thank you

    Hi, The specifications for 500-308nr indicate an external 180 watt power supply supply. Is that true?  If the specifications are correct then you will not be able to install an internal power supply.

  • Question about changing xml tags in your RSS feed

    If I were to change the "author" of my podcast (namewise) - would that mess up the feed for anyone subscribed? I'm not sure what end users see or experience.
    <itunes:name>element
    So I I switch this to a different name - does that mess up existing subscribers in any way?
    Thanks!

    No: subscribers identify the feed by its URL and any changes you make to tags will simply appear for them. Changes will appear in the iTunes Store after a delay of a couple of days or so, but immediately for subscribers.

  • Question about changing zonepath from one mount point to another

    Hi all
    A local zone is currently running with its zonepath, say /export/home/myzone, mounted on a Veritas volume. Is it possible to change the zonepath to a different mount point, say /zone/myzone, which is mounted on the same volume, without re-installing the entire zone?
    Regards
    Sunny

    Yes..
    U can use zonecfg to reconfigure the zone..
    which is Sun's supported way..
    I just usually edit /zones/zone-name.xml
    There are several ways to move a zone, but this has
    always worked for me..
    - stop the zone
    - tar the zone
    - move the zone
    - edit the /etc/zones/zone-name.xml (to reflect the new path)
    - detach the zone
    - attach the zone (so it regnerates the hash)
    - boot the zone
    hth

  • Question about changing method signature

    Hello. I've inherited some code which contains a method with the following signature:
    foo(int x, MyObject myObject)
    Okay, so that's not really the exact signature :) In any case, I need to modify the signature to:
    foo(int x, Object myObject)
    I believe that I can do this without affecting any existing client code because Obect is a superclass of MyObject. Is that right or must I deprecate the first version and add the second separately? Whatever, happens I can't break code which was compiled against the old version. Thanks in advance.
    -jason

    That's a good point. It's probably not an issue
    however as we don't provide (supported) access to our
    implementation classes. Thanks for the input.
    -JasonThen I don't see another issue with it, as long as no other internally-written class has already overridden it and doesn't get changed at the same time. In a sense you're saying it's a "private" (not necessarily in the same sense of the private keyword) method, so you can change the implementation, including method signatures, at your whim.

Maybe you are looking for