Questions about connecting second monitor to HP 610-1015xt TouchSmart AIO

Hi,
I have a HP 610-1015xt  touchsmart PC with AMD Radeon HD5570.  Now I've gone through all the similar questions on this forum and I still had a couple of my own or needed some more calarity on some.
I've read time and again that one should use the second monitor in "clone" mode istead of "extended" mode because TouchSmart software is not compatilable with exteded mode. Now does that simply mean that my PC may show erratice behavior if I try to use touch features while in extended mode and second monitor connected?  Because if that's the only issue, I can live with it as I don't use touch features at all. Also, will dsiabling touch help in any way? 
Is anyone here using a second monitor in extended mode on a touchsmart? Have you guys faced any issues? 
Also, what I'm trying to find out is if things will run smooth if I connect a HP 32" Quad HD monitor with 2560 x 1440 resolution? I have found a adapater called Plugable USB 3.0 to HDMI adapter which supports 2560 x 1440, I'm just trying to figure out if my PC will be able to hadle it? If anyone has any knowledge on this, please do share.  Because if I can't get the full resolution, I will just settle for a full HD screen. 
People, please do share your experinece or suggestions. Any help will be greatly appreciated.
Thank you,
Jay

Jay, I own a notebook without touch but a monitor with touch. I use my monitor as extended monitor. The touch works fine on the extended monitor and works without touch on the notebook screen. I do not face any issues in using this way. Depending on my need, it switch my primary display to the extended touch monitor or notebook screen. Whether it is the primary display or not, when in extended mode, the touch works fine on my monitor.
Regarding the other question on Quad monitors, my knowledge is limited. Sorry for not being able to answer that part of the question.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Similar Messages

  • Question about connecting two monitors to Mid 2010 MBP

    I have a Mid 2010 MacBook Pro (running OS X, 10.6.8), and I want to connect it to two ASUS monitors (VS228H-P) that have HDMI, DVI, and VGA interfaces.
    1) Is this possible?
    2) What parts will I need to make the connection?
    3) Will I be able to close the lid without the MBP going to sleep?
    4) Any recommendations for an external mouse and clickety-clack keyboard? (My preference is for wireless, but I'm open to wired, too).
    If there are other recommendations for configuration (I'd like to spend less than $150/monitor. They won't be used for gaming, but for working from home and watching various media...)
    THANKS!!!

    Hi kishap8,
    Have you made changes in the display settings to make the PC use both monitors? It doesn't extend the screen on it's own.
    Here is an HP Support document on how to change display settings: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03366869&cc=us&dlc=en&lc=en&product=5309983
    And here are a couple videos (for Windows 7 that is very similar to Win 8) on how to work with multiple monitors:
    https://www.youtube.com/watch?v=Nj0RT8yVlUA
    https://www.youtube.com/watch?v=WDQCXOSJGM0
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • MSI Gt70 dominator pro connecting second monitor questions

    I have the new dominator pro, when I plug in my monitor (23" asus ips) it automatically runs off my gtx gpu. Light turns on, heats up (not hot but not idle). Is there any way to change this to run off intel? I'm not doing anything at all that would require descrite power, right now im just trying to have vevo on monitor for my son to watch videos while I work on my laptop screen.
    I know with my asus g750 laptops it was always defaulted to intel gpu when connecting second screen.

    Quote from: Dblkk;108055
    Yea, I tried that. That's how I always set up multi monitor (then I have the extend/clone/ect options. But when I did that, the resolution was horrible, the picture was a good 4 inches from each side (left/right) and all the way top to bottom. All settings were full screen, regular resolution, eveyhing exactly the way it runs on my other machines. Just total crap on my msi, and NVidia graphics were still on.
    I searched all settings and everything looks legit, but NVidia graphics are in charge. Maybe that's just the design of the msi, whenever a second screen is used, it just defaults (without user control) to NVidia. Maybe bios or something hidden?
    Not a huge issue, just wasn't sure if it was a common msi thing with an easy fix or not.
    I forgot to ask something as well. How is the monitor connected? HDMI? DVI? DP? Maybe a diferent cable might change the result? I'll try the monitor thing on my demo unit when I'm back at Memory Express on Sunday and update.

  • 2 questions about connection to hyper-v in windows 8

    hi,
    I can connect to my virtual machine from hyper-v manager  ,but when I try the other option
    --- connect with hyper-v virtual machine(option)  I see  on the log on wizard telling me that I don't have  the right to run this job.  take contact with the autorazition policy administrator.
    1---my question is here ,   is connect with hyper-v virtual machine  option   is  specially purposed to connect with  virtual server or it has some onother function!   because I opened the autorazation
    policy on my windows 8 to see if I can edit some policies but I didn't see any function to creat one only it is asking for archieve.
    2--connction trough remote desktop to VM is only purposed from ouside or you can use it  to connect to VM internally too? very short answers wil be enough.
    thanks
    johan
    h.david

    thanks
    ,but wat about connect to hyper-v  virtual machine option in start menu(which is one of  hyper-v manage  programa's option  and  the second is shyper-v manager), why I can not connect through this option
     it gives  me Always an error with  that I don't have the right to run this  conect option through its log on  window and I have to contact my system administrator of autorization policy?
    is this option (connect) outside the hyper-v manager is purposed for the server or I have to change some policies on my computer to can log on to virtual machine from ouside the hyper-v manager with this second option
    johan
    h.david

  • Trouble connecting second monitor (MBP late 2011)

    Hi guys! I'm Nico and as you can see from the title i'm having problems connecting a second monitor to my macbook pro late 2011.
    I have a mini display port to hdmi adapter that works perfectly fine (I use it with my HDTV), and because I also have an Asus external 22" monitor I bought a hdmi/vga cable
    (http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=171010746825#ht_2700wt_1144)
    so I could use my mini display port to hdmi adapter without buying another adapter.
    This is what I do:
    1- connect the vga cable to the Asus monitor
    2- connect the other end of the cable (hdmi) to the mini display port to hdmi adapter
    3- connect the mini display port to hdmi adapter to my macbook pro
    But nothing works! My Mac is plugged to the power as well. I've tried to check in the monitor setting but nothing shows up, and even doing "detect display" still nothing works.
    I've also tried to reset the pram. But without luck.
    Any suggestions?
    Thanks,
    Nico

    Any idea guys?

  • Envy 15t-J100 Problem connecting second monitor

    Hi!
    So I have that problem that I want to know if someone ever had or have the answer for.
    Each time I plug a second monitor using an HDMI cable, in order to get it to work I need to go to the device manager, disable and enable the Intel HD 4600 driver. 
    It's was OK when I used to connect the second monitor once in a while.. but now I use it on daily bases and each time it goes to sleep mode I need to do the disable/enable thing again. 
    Please let me know if you have any solution,
    Thank you, 
    Ron.

    @Berkomb ,
    Hello and thank you for posting on the HP support forums.  This issue may be due to a possible update from Microsoft.  If an updated driver has been loaded that is not from the HP support site it may cause a change in functionality.  
    You may want to try a system restore back before you noticed the problem.
    HP PCs - Using Microsoft System Restore (Windows 8)
    Here is another link that may help you as well.
    HP Notebook PCs - Troubleshooting HDMI Display and Sound Issues
    Please let me know how things go.
    Thanks again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Basic questions about connection sharing and radio mode

    I just got TC and have a couple of basic questions.
    At home I have a D-Link ADSL modem/router (no wifi) plugged into the wall, and would like TC to provide wifi. I've connected the WAN port to some LAN port of the router and everything works fine. The intented usage of the setup is wifi-only. Would you recommend TC to do DHCP/NAT? Or is Bridge mode better? In the latter case I don't fully understand who's routing the wifi network (though it actually works).
    Second question is about radio mode. My wife has an iBook G4 that is not capable of talking 801.11n, so I selected the n mode compatible with b/g. In that mode my black MacBook will still be able to talk 801.11n with TC? The iBook has very low usage, it is fine that computer uses 801.11g for TC, but I'd like the MacBook to go full-speed. (If that's not possible I'd ponder purchasing an 801.11n adaptor of some sort for the iBook.)

    Would you recommend TC to do DHCP/NAT? Or is Bridge mode better?
    It doesn't matter.
    In the latter case I don't fully understand who's routing the wifi network (though it actually works).
    The D-Link modem/router.
    In that mode my black MacBook will still be able to talk 801.11n with TC?
    Yes. It will only suffer lower bandwidth if the iBook G4 is actively connected.

  • Need help.. Question about connectivity of PS2 with Creative A2ZS Video Edit

    Hi everyone, i have question regarding creative A2ZS video editor.. please forgive me for my innocent question since im new here..
    I own a Play Station 2.. can this video editor allow me to connect my PS2 and show the display on the monitor so that i can play my PS2 game on the monitor? it's like functioning like a VGA box.. thanks!Message Edited by nicholas_23 on 05-9-200709:46 AM

    If you hook the standard analog video outputs of the PS2 (the ones that would go to the TV) into the Video Editor and get into the VidCap applet (free download from the Creative Website), drag the Preview window so its full screen, then you can use your laptop or desktop as a "TV".
    -Chrisi

  • Unable to connect second monitor

    Hi everyone
    I have recently bought a refurbished imac and I still have my old Dell monitor that I'd like to use as a second display alongside my imac. I've purchased the thunderbolt to vga adaptor to connect the two together but my monitor is always on a standby state.
    My imac is a 7-inch iMac 3.4GHz quad-core Intel Core i5,  with two thunderbolt ports and four usb ports.
    Please advise, thanks.

    If your Dell display has VGA, DVI, HDMI then you will need one of the following adapters:
    Mini-Display port to VGA
    Mini-Display port to DVI
    Mini-Display port to HDMI
    Then follow the instructions in OS X: How to use multiple displays with your Mac in Mountain Lion and earlier - Apple Support

  • 2 questions about connection speeds

    Hello,
    First up: I've been using the same ISP for 3 years now, at the same apartment, and my top download speed has always been 1.5Mbps (roughly 185K/s). For some reason my top download speed "now" is precisely 150K/s, and it's been that way for the past week or so. (And this speed limit affects all my internet-aware apps.)
    Is it possible that I've set an OS-wide download limit without realizing it?
    Second question: I'm using MenuMeters to determine my connection speed. When using Transmission, a Bit Torrent app, I can also read it's total downloading speed. When MenuMeters tells me that my total download speed is 150K/s, Transmission tells me that it's only downloading at 135K/s.
    Trouble is that Transmission is the only app running. And indeed if I pause the downloads, MenuMeters indicates 0K/s (so there are no other internet-using apps running). Since I haven't found any report of speed errors on the Transmission forum, I don't understand this incoherence.
    Any ideas?
    Thanks
    Loa

    Hello,
    Tom: very close to what MenuMeters was telling. So I guess Transmissions has some bugs.
    But that doesn't solve my other problem: why isn't my top speed 185K/s anymore? Can this be on my side, or is it entirely up to my ISP?
    Thanks
    Loa

  • Question about connection between cache engine and cat6k

    Dear sir,
    Here is the problem description, please give me some help, thank you so much:
    catalyst 6509 is enable for wccp v2.CE 7320 also enable the wccp v2.Wccp service 91 is configured on 6509.Service-munber 91 and port-list 1(with port number 8080) are also configured on CE 7320.Wccp communicates well about service number 91.
    but browsing web page with port number 8080 gets always failed.
    1.6509 wccp configuration:
    ip wccp web-cache redirect-list 30
    ip wccp 91
    interface Vlan10
    ip address 211.162.224.2 255.255.255.240
    ip wccp web-cache redirect out
    ip wccp 91 redirect out
    2.ce7320 wccp configuration:
    wccp router-list 1 211.161.1.49
    wccp port-list 1 8080
    wccp web-cache router-list-num 1
    wccp service-number 91 router-list-num 1 port-list-num 1 application cache
    wccp version 2
    3.show info. from 6509 and ce 7320:
    gwbn7320#sh wccp content-engines
    Content Engine List for Service: Web Cache
    IP address = 211.161.1.50
    Routers seeing this Content Engine(1)
    211.162.224.2
    Content Engine List for Service: WCCPv2 Service 91
    IP address = 211.161.1.50
    Routers seeing this Content Engine(1)
    211.162.224.2
    gwbn7320#sh statistics http savings
    Statistics - Savings
    Requests Bytes
    Total: 90685 460066803
    Hits: 936 162710
    Miss: 89749 459904093
    Savings: 1.0 % 0.0 %
    6509-left#sh ip wccp
    Global WCCP information:
    Router information:
    Router Identifier: 211.162.224.2
    Protocol Version: 2.0
    Service Identifier: web-cache
    Number of Cache Engines: 1
    Number of routers: 1
    Total Packets Redirected: 2525
    Redirect access-list: 30
    Total Packets Denied Redirect: 0
    Total Packets Unassigned: 146
    Group access-list: -none-
    Total Messages Denied to Group: 0
    Total Authentication failures: 0
    Service Identifier: 91
    Number of Cache Engines: 1
    Number of routers: 1
    Total Packets Redirected: 0
    Redirect access-list: -none-
    Total Packets Denied Redirect: 0
    Total Packets Unassigned: 0
    Group access-list: -none-
    Total Messages Denied to Group: 0
    Total Authentication failures: 0
    Regards,
    Sha

    Gilles,
    Thank you!
    Here is the result:
    6509-left#sh ip wccp 91 detail
    WCCP Cache-Engine information:
    IP Address: 211.161.1.50
    Protocol Version: 2.0
    State: Usable
    Redirection: GRE
    Initial Hash Info: 00000000000000000000000000000000
    00000000000000000000000000000000
    Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
    FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
    Hash Allotment: 256 (100.00%)
    Packets Redirected: 180
    Connect Time: 00:07:06
    Regards,
    Sha

  • Question about connecting to internet without using Wi-Fi

    This is a potentially dumb question, but I am a brand-new iPhone user and former Treo user, so I am used to a different set-up when it comes to connecting to my mobile carrier's data network. I can successfully connect my iPhone to my wireless (airport) network, but when I'm out on the street, I thought that the AT&T data network would pick up where the wireless left off. But, nothing happening. I'm used to the Treo having a VPN settings page. On my iPhone, there are no VPN configurations. I signed up for a data plan with AT&T, so I thought they would have configured the phone with the settings. Can anyone fill me in on some missing information? Thanks!

    I did some more digging for information last night and figured out how to get online when not connected to WiFi. Thanks! Problem solved.
    This page: http://www.apple.com/support/iphone/troubleshooting/calls/
    explained it all to me.

  • Question about CONNECT BY PRIOR

    Hi,
    I have a table (genealogy table.). I have child id, father id and mother id. I'm trying to built a request to be able to see the family tree : mother, father, grandfather, grandmother, etc.
    I need some help about how to retrieve it with the CONNECT BY...
    Thanks in advance!

    Hi,
    Gaétan Francoeur wrote:
    I would like to retrieve : LILI, her parents and grandparents, and so on...
    I put the names, but in real life it would be into another lookup table.
    ID          NAME     FATHER_ID          FATHER_NAME          MOTHER_ID          MOTHER_NAME
    05          LILI     20                    PAWZ               30                    RHIANNON
    15          MAX          20                    PAWZ               40                    BEAUTY
    20          PAWZ     50                    DEXTER               60                    FAY
    60          FAY          NULL               NULL               NULL               NULLOne more time: post CREATE TABLE and INSERT statements for the data in your table (or tables), and post the results you want from that data (formatted, between \ tags).
    Did you try what I posted in my first message?SELECT     *
    FROM     genealogy
    START WITH     name     = 'LILI'
    CONNECT BY     id     IN ( PRIOR father_id
                   , PRIOR mother_id
    I can't try it; I don't have a copy of the genealogy table yet.
    This sounds like an interesting project, but I can't help you without a version of your table, even if it's very small, and I need to know exactly what you want to produce from that table.
    Edited by: Frank Kulash on Jun 16, 2010 10:39 AM
    Fixed typo                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Question about a second hard drive..

    13" MacBook Pro, Mid 2012 (Non-Retina)
    Hello, in early December when in the Apple store, I was torn between a MacBook Air and Pro. After talking it over and hearing the basics from the Apple store guy, he mentioned how many people use the DVD Drive space in their Pros to fit a second hard drive! Now I'm all set up with my Pro, I'm wondering what kind of benefits this could have, so I have two questions...
    1.  How do I do this? Is there a spare HDD cable inside the machine? :S
    2. When I fit a new HDD in the DVD Drive space can I use it as a 'seperate backup' for the other? E.g. When on the system open Time Machine and select the other internal drive as backup.
    Also, I'm considering buying an OCZ 240GB SSD drive for my main and maxing ram to 8GB!
    Thanks for taking the time to read and potential answers! 

    Others on here have done this, you can search in the box with the blue Search button towards the upper right of the page.  But it is involved.  You should also check the impact on your warranty and AppleCare if you bought that...Apple only permits installation of ram and replacement of the hard drive under the warranty.
    There are advnatages to keeping the optical drive, such as burning disks, loading software, files, etc.  An external hard drive is a good solution to the extra storage issue, and so easy to just plug in and partition and format how you want them to work.
    I like having the option of the optical drive plus the external drive, which is why I have external drives for all of my Macs.

  • Question about connection to network with Terminal Window

    WinXP Pro, SP2, PCMCIA-Fritz-Card
    Hi,
    I'm trying to create a computer-to-computer connection via ISDN telephone line.
    I didn't install any specific dialing software, I'm using only setting of MS WinXP.
    The hardware is working fine, I tested it successful while dialing in to different internet provider.
    Now I need to connect to a company network and they have a specific logon policy, where I need to show the Terminal Window during login procedure.
    Therefore I activate on dial in connection property dialog, on page 'Security Properties' the option 'Show Terminal Window'.
    Problem during dial in: the window doesn't occur.
    Second problem: If I go next time to this option, the input value is not saved.
    Any ideas?
    Regards,
    Peter

    Please dont be mad on me but I dont see what is in your posting specific for Toshiba forum.
    You should talk with network administrator in your company and he should be able to help you. Other way, maybe on some network specific forum you will have more chance to find out what is the solution for your problem.
    If you have Toshiba notebook and all hardware you need for connection works well, I dont see reason for writing here.
    Anyway I wish you luck and hope your network administrator will be able to help you.

Maybe you are looking for