Questions about creating sets using FM

Hi,
It seems that FM G_SET_CREATION is not a true function module where I could provide all the parameters wit the values and the sets would be created automatically. Somehow, I have to write a program to do the BDC steps. Has anyone written a program to use FMs G_SET_CREATION and G_SET_MAINTENANCE? How would I use these FMs?
Thanks,
Will

Hi Will,
Please check this sample code in for BDC line item loop.
FORM populate_data .
data: lv_po(35) type c,
        gv_num(3) type n value '001',
        gv_fname1(132) type c,
        gv_fname2(132) type c,
        gv_fname3(132) type c,
        gv_fname4(132) type c.
sort gt_sdata by BSTKD POSNR.
describe table gt_sdata lines l1_num.
loop at gt_sdata INTO gs_sdata.
    if lv_po ne gs_sdata-bstkd.
      lv_po = gs_sdata-bstkd.
      clear: gv_fname1, gv_fname2, gv_fname3, GV_FNAME4.
      perform bdc_dynpro      using 'SAPMV45A' '0101'.
      perform bdc_field       using 'BDC_CURSOR' 'VBAK-AUART'.
      perform bdc_field       using 'BDC_OKCODE' '/00'.
      perform bdc_field       using 'VBAK-AUART' 'OR'.
      perform bdc_field       using 'VBAK-VKORG' '300'.
      perform bdc_field       using 'VBAK-VTWEG' '20'.
      perform bdc_field       using 'VBAK-SPART' '01'.
      perform bdc_dynpro      using 'SAPMV45A' '4001'.
      perform bdc_field       using 'BDC_OKCODE' '=KKAU'.
      perform bdc_field       using 'VBKD-BSTKD' gs_sdata-BSTKD.
      perform bdc_field       using 'VBKD-BSTDK' gs_sdata-BSTDK.
      perform bdc_field       using 'KUAGV-KUNNR' '1195'.
      perform bdc_field       using 'KUWEV-KUNNR' gs_sdata-KUNNR1.
      perform bdc_field       using 'RV45A-KETDAT' GS_SDATA-KETDAT.
      perform bdc_field       using 'RV45A-KPRGBZ' 'D'.
      perform bdc_field       using 'RV45A-DWERK' 'INDY'.
      if gv_num = gs_sdata-POSNR.
        concatenate 'RV45A-KWMENG(' gv_num ')' INTO GV_FNAME1.
        concatenate 'VBAP-POSNR(' gv_num ')' INTO GV_FNAME2.
        concatenate 'RV45A-MABNR(' gv_num ')' INTO GV_FNAME3.
        concatenate 'KOMV-KBETR(' gv_num ')' INTO GV_FNAME4.
        perform bdc_field       using 'BDC_CURSOR' 'GV_FNAME1'.
        perform bdc_field       using GV_FNAME1 gs_sdata-POSNR.
        perform bdc_field       using GV_FNAME2 gs_sdata-MABNR.
        perform bdc_field       using GV_FNAME3 gs_sdata-KWMENG.
        perform bdc_field       using GV_FNAME4 gs_sdata-KBETR.
        gv_num = gv_num + 1.
*        APPEND gs_sdata.
*        Clear gs_sdata.
      endif.
      perform bdc_dynpro      using 'SAPMV45A' '4002'.
      perform bdc_field       using 'BDC_OKCODE' '=SICH'.
      perform bdc_field       using 'BDC_CURSOR' 'VBAK-GWLDT'.
      perform bdc_field       using 'VBAK-AUDAT' '08/24/2006'.
      perform bdc_field       using 'VBAK-VKBUR' '30'.
      perform bdc_field       using 'VBAK-GWLDT' GS_SDATA-GWLDT.
      perform bdc_field       using 'VBAK-WAERK' 'USD'.
      perform bdc_field       using 'VBKD-PRSDT' '08/24/2006'.
      perform bdc_field       using 'VBKD-KDGRP' '03'.
      clear gs_sdata.
      continue.
    endif.
    AT END of BSTKD.
      perform bdc_transaction using 'VA01'.
      clear gs_sdata.
    ENDAT.
endloop.
ENDFORM.                    " populate_data
Hope this will help.
Regards,
Ferry Lianto

Similar Messages

Design question about when to use inner classes for models

This is a general design question about when to use inner classes or separate classes when dealing with table models and such. Typically I'd want to have everything related to a table within one classes, but looking at some tutorials that teach how to add a button to a table I'm finding that you have to implement quite a sophisticated tablemodel which, if nothing else, is somewhat unweildy to put as an inner class.
The tutorial I'm following in particular is this one:
http://www.devx.com/getHelpOn/10MinuteSolution/20425
I was just wondering if somebody can give me their personal opinion as to when they would place that abstracttablemodel into a separate class and when they would just have it as an inner class. I guess re-usability is one consideration, but just wanted to get some good design suggestions.

It's funny that you mention that because I was comparing how the example I linked to above creates a usable button in the table and how you implemented it in another thread where you used a ButtonColumn object. I was trying to compare both implementations, but being a newbie at this, they seemed entirely different from each other. The way I understand it with the example above is that it creates a TableRenderer which should be able to render any component object, then it sets the defaultRenderer to the default and JButton.Class' renderer to that custom renderer. I don't totally understand your design in the thread
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=680674
quite yet, but it's implemented in quite a bit different way. Like I was saying the buttonClass that you created seem to be creating an object of which function I don't quite see. It looks more like a method, but I'm still trying to see how you did it, since it obviously worked.
Man adding a button to a table is much more difficult than I imagined.
Message was edited by:
deadseasquirrels

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in. Thanks

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in.

You don't. Email comes in either by push or when you invoke the email app. Ther is no password except when you first set up the account. If your iPad is not being used as your personal device and you need to shield emails from other users, then don't use the email app. Instead, use web mail if available from your provider.

A question about creating packages as local objects in ABAP

Hi,
I have a question about creating packages with SE80. Whenever I create a new package it is assigned a new transport request. After that, I can create new programs inside this package, and each time I can choose whether to assign the new program to a transport request or just save it as a local object (I often do this for test programs that I don't transport and I remove them once my tests have been done).
What I would like to ask is that, is it possible to create a package (and not just programs inside a given package) as a local object? so that every new object created in this package will be considered as a local object?
Thanks in advane,
Kind Regards,
Dariyoosh

Thomas Zloch wrote:
Please also check the F1 help for the package field e.g. in SE80, SAP standard is in range A-S and U-X, namespaces start with "/", so you should be save. I am using the T namespace for temporary stuff since a long time and did not have a problem so far.
> Thomas
>
> P.S. this applies to the package name only, of course
Thank you very much for this remark, I checked F1 help for the package field and in fact as you mentioned these ranges are for local objects.
Once again, thank you very much for your help.
Kind Regards,
Dariyoosh

Question about openning files using SDK 10.

I have written a Plug-In for SDK 9 that works wonderfully. One of the functions is for the user to be able to page (Next/Previous) between PDF files on our server. This functionality now longer works without crashing Acrobat 10. All I am doing is creating the URL path to the next/previous PDF, creating a CustomFileSys with the path and calling AVDocOpenFromFile.
Does this no longer work with Acrobat 10 SDK?
Thanks!

Should work fine, AFAIK.
For this level of issue, I would open a formal support request with developer support.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Mon, 10 Oct 2011 08:51:08 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Question about openning files using SDK 10.
Question about openning files using SDK 10.
created by Greggars<http://forums.adobe.com/people/Greggars> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3963065#3963065

A question about creating READ ONLY users.

Dear all,
I have a question about read only user accounts and I would appreciate if you could kindly give me a hand. I have a schema named SCHEMA1. Whenever I want to connect by using sqlplus I run the following:
sqlplus user1/[email protected] SCHEMA1.WORLD is the entry in the tnsnames.ora referring to the schema SCHEMA1.
I need to create a read only user who is able to SELECT all tables and views created by user1 on SCHEMA1 (this user will not modifiy anything at all. The user is used only for a person using SQL queries to read data). for several tables I write the grants explicitly, for example:
CREATE USER user2 IDENTIFIED BY user2;
GRANT CREATE SESSION to user2;
GRANT SELECT ON S001_COR_ECLASS TO user2;
GRANT SELECT ON REF_ECLASS511 TO user2;Is there anyway to do the same thing but for all the tables (because there are a lot of tables and views)? Besides, even with these granted permissions when the user connects with SQL Developer to the database, he is not able to view the list of tables/views in SQL Developer GUI. What causes this problem?
Thanks in advance,
Dariyoosh

Hello Dariyoosh,
he is not able to view the list of tables/views in SQL Developer GUIyou can either go to "Other Users" - user1 - tables. There you see every table you have permission to select.
Or you can create a synonym in schema2 for each table in schema1 and set a filter on the tables node of user2 "Include synonyms".
Regards
Marcus

Questions about Indexing and Using an Indexing POA

Although I have only about 50 users, at least 15 of them have in excess of 100,000 messages in their accounts and the POA (version 7.0.2) is regularly slowing to a crawl. (I just know that plans for revolution are fomenting!) I have embarked on a campaign to reduce these accounts by archiving everything off to get mail accounts down to 3000 or fewer pieces. I have achieved user buy-in, but have worked on only a few users so far.
In another closely related thread, it was suggested to me that the PO speed issues relate to broken indexes. And I suspect that given so many messages, the indexes were never getting fully rebuilt with the default QF POA settings. I am trying to fix that situation in addition to reducing mail account sizes. So, I have set up a second POA on another server and dedicated it to the indexing task. The /qfinterval is set for 1 hour, other /qf switches at default. The POA-QF does no mail delivery, but it does do nightly user upkeep.
The POA-QF seems to be steadily working away and making progress at reducing the number of unindexed messages. However, I have questions about what I am seeing and what more I can do:
1. Is the progress I am seeing real progress? For example I have a user with over 100,000 messages to be indexed and every time I check the logs, the count drops by about 500 messages per hourly QF cycle. I assume that if I just let it keep running, it will eventually get caught up and fixed. Not only with this user, but with all the others as well. Will my patience (and theirs) be rewarded? Are there any gotchas I need to prepare for?
2. One user has recently had virtually all of her messages successfully moved to archive. I can see them in the Archive, and do not see them in the online account. However, now over a week later, QF still shows >130,000 items still left to index for that user. The POA-QF is making slow, steady progress reducing that number, but why is this user's QF count still so high? Does it just need more time, or is there something amiss for this user?
3. I may want to rebuild indexes for single users from scratch. I have seen the TID 3105742 which tells how to do this: Essentially you turn off mail delivery functions, and make some other switch changes to dedicate the POA to indexing for just a single user, and then you let the POA rebuild the indexes. The implication of that scenario is that the POA is now enjoying exclusive access to the user's databases.
If I want to use my secondary POA-QF to rebuild a user's index from scratch, does the main POA have to be offline and the user out of GWise? That is, Does the QF process require exclusive access in order to rebuild indexes from scratch?
Thanks for any thoughts or suggestions.
Peter Smick

pgsmick wrote:
> 1. Is the progress I am seeing real progress? For example I have a user with
> over 100,000 messages to be indexed and every time I check the logs, the count
> drops by about 500 messages per hourly QF cycle. I assume that if I just let
> it keep running, it will eventually get caught up and fixed. Not only with
> this user, but with all the others as well. Will my patience (and theirs) be
> rewarded? Are there any gotchas I need to prepare for?
Set this switch for this indexing POA - /qflevel=999 - this will index
everything in one run. It will take a long time, but with no qflevel switch you
are indeed only indexing 500 messages at a time, and if the user has that much
mail, it might never really catch up.
>
> 2. One user has recently had virtually all of her messages successfully moved
> to archive. I can see them in the Archive, and do not see them in the online
> account. However, now over a week later, QF still shows >130,000 items still
> left to index for that user. The POA-QF is making slow, steady progress
> reducing that number, but why is this user's QF count still so high? Does it
> just need more time, or is there something amiss for this user?
>
This is odd, because really the index count should drop to nothing, but with the
above switch this might get resolved as well.
> 3. I may want to rebuild indexes for single users from scratch. I have seen
> the TID 3105742 which tells how to do this: Essentially you turn off mail
> delivery functions, and make some other switch changes to dedicate the POA to
> indexing for just a single user, and then you let the POA rebuild the indexes.
> The implication of that scenario is that the POA is now enjoying exclusive
> access to the user's databases.
Not really - the POA is not enjoying exclusive access to the user's database,
the indexer is just avoiding an attempt to index anything else.
> If I want to use my secondary POA-QF to rebuild a user's index from scratch,
> does the main POA have to be offline and the user out of GWise? That is, Does
> the QF process require exclusive access in order to rebuild indexes from
> scratch?
No - QF never requires exclusive access. That said, you may find that an
extremely vigorous QF can cause slowdowns for the user.
Danita
Novell Knowledge Partner
Moving GroupWise to Linux?
http://www.caledonia.net/gwmove.html

Beginners question about creating first database and tables

Hi all,
i recently have installed 10g express edition, because i want to transform my php-script from mysql to oracle database. (due to the fact that mysql is "not allowed sofware" at the company i work for).
it is a quit small script, just a shift-report system, build because of frustration about an used shift report system based on excel sheets. Company likes it, but IT-department rejected it, because it is myssql. They do own a lot of oracle servers, so they set up a database for me, got a username and password.(Tnsnames entry). The rest i have to do by myself, no further support from IT department.
I have made 2 simple php functions to connect to database:
// for connection home server:
function conn()
     $user = 'user';
     $password = 'password';
     $conn = oci_connect($user, $password, 'localhost/XE');
     return $conn;
// for connection at work:
function Xconn()
     $db = '(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.eu.xxx.com)(PORT = 1521))
    (CONNECT_DATA = (SID = NVGPP)))';
     $user = 'xxxxxxxx';
     $password = 'xxxxxxx';
     $conn = oci_connect($user, $password, $db);
     return $conn;
}I just add or remove X character before function name, for use at home or at work.
both do work fine.
First thing i wanted to do, is to create my database and tables.
Schema dump from mysql:
-- phpMyAdmin SQL Dump
-- version 2.11.1
-- http://www.phpmyadmin.net
-- Host: localhost
-- Generatie Tijd: 03 Aug 2010 om 21:35
-- Server versie: 5.0.24
-- PHP Versie: 5.2.4
SET SQL_MODE="NO_AUTO_VALUE_ON_ZERO";
-- Database: `ewb`
-- Tabel structuur voor tabel `afsprakenblad`
CREATE TABLE IF NOT EXISTS `afsprakenblad` (
`id` mediumint(8) unsigned NOT NULL auto_increment,
`naam` tinytext NOT NULL,
`afspraak` text NOT NULL,
KEY `id` (`id`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 COMMENT='Afsprakenblad' AUTO_INCREMENT=13 ;
-- Tabel structuur voor tabel `verslag`
CREATE TABLE IF NOT EXISTS `verslag` (
`id` int(10) unsigned NOT NULL auto_increment,
`ewb_id` int(10) unsigned NOT NULL,
`datum` date NOT NULL,
`dienst` tinytext NOT NULL,
`ploeg` tinytext NOT NULL,
`gebouw` varchar(10) NOT NULL,
`installatie` tinytext NOT NULL,
`subdeel` tinytext NOT NULL,
`subsubdeel` tinytext NOT NULL,
`sap` int(4) unsigned NOT NULL,
`tekst` text NOT NULL,
`status` tinyint(3) unsigned NOT NULL,
`afdeling` tinytext NOT NULL,
PRIMARY KEY (`id`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=4663 ;
-- Tabel structuur voor tabel `wachtverslag`
CREATE TABLE IF NOT EXISTS `wachtverslag` (
`id` int(10) unsigned NOT NULL auto_increment,
`datum` date NOT NULL,
`dienst` tinytext NOT NULL,
`team` tinytext NOT NULL,
`afdeling` tinytext NOT NULL,
`status` enum('open','dicht') NOT NULL default 'open',
PRIMARY KEY (`id`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=800 ;When i wanted to create a new databse with: CREATE TABLE ewb, i get an error that databse already is mounted??
How do i create this database and tables?
after googling i read something about schema owners, but cant find anything about how to copy my mysql database/tables to oracle.
Please, help is really appreciated by me.

Translating from mysql to Oracle will need a bit of fixups for the DDL, once an oracle instance is created, set up and running, you won't create a database but you will have a database user or users that create/own a collection of tables, indexes, functions, procedures, etc.
It will take a bit of pouring through the oracle documentation to get those table create statements to work, i.e. the engine=, charset=, auto_increment items won't succeed, datatypes need adjustments, the tic marks around the entity names aren't necessary, quite a few other items from the mysql data definition language don't have an oracle equivalent.

Question about HTML files using TextEdit

First off, I wanted to ask if this is the proper place to post a question about HTML/XHTML. I couldn't really find anywhere else that seemed to fit better, but please point me in the right direction if this is not the place. Thanks.
Moving on -- here's my question:
I'm having trouble with working with HTML files in TextEdit. I'm on a Mac, using TextEdit as my HTML editor (I can not afford one of these other HTML editors, and I like using a simple text editor like TextEdit for HTML). Here's my problem: I open a new rich text document in TextEdit and write my HTML and then choose File>Save As and choose "HTML" under the File Format drop-down box. Having saved this file as an HTML file, I then open Safari and choose File>Open File and select my HTML file; however, when I do this, my web page's text does not appear in the browser window. Instead, the HTML code itself appears in the browser window, as if the browser was not interpreting it as HTML and converting it. The same problem happens when saving the file as a .htm file using Microsoft Word for Mac.
So, as another solution (at the suggestion of a helpful poster in a previous thread), I tried creating a plain text file in TextEdit (instead of a rich text file like before). Now, in TextEdit there is no option for saving plain text files as HTML files, so I simply save it as a Unicode-8 format and then find the file in Finder and change the extension to .htm myself (I've tried .html as well). This, fortunately enough, actually works! When I open the file in Safari I get to see my web page as expected. However, the first time I quit out of the application TextEdit and then try to reopen my .htm file in TextEdit, I no longer can see my HTML code. Instead, TextEdit shows me the actual web page text that I would expect to see when I open the file in a browser, and my HMTL code is lost.
Can someone please help me here? There has to be a way to edit HTML in TextEdit without the code disappearing every time you quit out of the application and reopen the HTML file. Any help is greatly, greatly appreciated. Thank you.

That's the problem -- once I convert it to plain text there is no longer an HTML option under the Save As drop down menu. The drop down menu's title is Plain Text Encoding instead of File Format and the only options I get are Unicode-8, Unicode-16, Western, Chinese, and so forth. I can save it as an HTML file, but only if the file is rich text, which doesn't work for HTML.
So, I can save it as plain text (.txt) and then go and change the extension myself, and like I said, it works if I do that. I can edit HTML in TextEdit and open the file properly in Safari to view my web page. The problem is (I went over all this in my first post) that, after that, if I exit TextEdit and reopen it, my document is no longer HTML code -- it is now simply the text of the web site as if I had opened it in a broswer.
What do you suggest I do?

Few questions about file sharing using airport

I'm thinking about getting an AirPort Extreme, but I have a few questions:
1- I (must) use Ubuntu Linux at work and I would like to be able to acess my home files hosted at AirPort remotly. Is this possible?
2- Can I access my files on my iPhone using 3G connection (eg: download or stream mp3 files, photos, ...)?
Thanks in advance!
Marcio

Yes.
Yes. Use FileBrowser for iPad.

Creating sets using a table data

Hi,
I have a table TVBVK which is for sales and not related to FI data. I am trying to create sets so that the sales office would be the parent node and the sales group would be the child. I am using GS01 and it seems that it would not work because the parent which is the sales office value that is different from the child value that is the sales group.
How would I create an hierarchy using sets by reading from this table? Would it be possible? Could I create sets so that the field names are different?
Thanks

Hi,
How woull that be? Would you elaborate why?
Thanks
Will

Question about extend calendar using scal? help,help

recently, we received a mail from sap which saying about extending calendar using scal;
I have read sap notes:1529649 , 501670
and my steps will be:
1> in our qas system using scal
change holiday calendar: choose CN China holiday calendar to change and then enter validation from 1995 to 2098(for example)
2> change factory calendar: choose CN China factory calendar to change and then enter validation from 1995 to 2098(for example)
3> in scal , choose menu: extras-->update calendar buffer
4> transport this change to our prd system.
5> go to scal in prd system to check
6> update prd system `s calendar buffer in scal
I do know whether my steps is right?
I have two questions:
1> we are a chinese compary, and we use several languages:TRADITIONAL CHINESE , SIMPLIFIED CHINESE and ENGLISH;
whether i should change other holiday calendar,such as british calendar?
2> Is there something wrong about my steps?
thanks a lot.
Edited by: victor on Nov 29, 2010 6:17 AM

Hi,
You are correct, But You can change it on QAS due to client will not modifiable.
Goto Developement System and run scal.
Most important is to change/extend factory calander and save it. Request will be generated as Workbench. Transport it to Production System.
Rgds
dk

Question about creating association between Sharepoint BDC entities using Visual Studio 2010

I am following this tutorial:
http://blogs.msdn.com/b/vssharepointtoolsblog/archive/2010/08/02/walkthrough-of-creating-association-between-sharepoint-bdc-entities-using-visual-studio-2010.aspx
I am getting the following error:
There is an error in the TypeDescriptors of Parameters on Method with Name 'CustomerToOrder' on Entity (External Content Type) with Name 'Customer' in Namespace 'BdcAssociationSample.BdcModel1'. The TypeDescriptors incompletely define where the Foreign
Identifiers of Entity 'Order' in Namespace 'BdcAssociationSample.BdcModel1' are to be read. That Entity expects exactly '1' Identifiers, but only '0' TypeDescriptors with the correct Association were found from which to read them.
I have viewed the following:
http://lightningtools.com/business_connectivity_services/the-typedescriptors-incompletely-define-where-the-identifiers-of-entity-x-are-to-be-readbcs-error/
after reading that article, I am still not sure what setting I am missing. Does anyone have the full working source code from the msdn article linked above?

Hi,
According to your post, my understanding is that you got the symbols not loaded error.
First try rebuilding your project by right mouse click the project > Rebuild If that doesn't work, try a clean of the project (right mouse click on the project > clean)
If that didn't work check this:
Right mouse click your project
select [Properties]
select the [Build] tab
make sure [Define DEBUG constant] and [Define TRACE constant] are checked
Click the [Advanced] button at the bottom of the Build tabpage
Make sure that [Debug Info:] is set to [full]
Click [OK] and rebuild the project ;
Hope that works for you! (step 6 generates the .pdb files, these are the debugging symbols)
What’s more, you can clean & re-compile the code, then install the respective dlls one more time to GAC (just remove them before adding to GAC again), do an IISReset to check whether it works.
More reference:
http://stackoverflow.com/questions/2155930/fixing-the-breakpoint-will-not-currently-be-hit-no-symbols-have-been-loaded-fo
http://stackoverflow.com/questions/2301216/the-breakpoint-will-not-currently-be-hit-no-symbols-have-been-loaded-for-this-d
http://geekswithblogs.net/dbutscher/archive/2007/06/26/113472.aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Question about creating new tables using SQL script in WebLogic Server

Hi,
I am new to WebLogic and I am following a book Java EE Development with Eclipse published by PACKT Publishing to learn
Java EE. I have installed Oracle Enterprise Pack for Eclipse on the PC and I am able to log into the WebLogic Server Administration Console
and set up a Data Source. However the next step is to create tables for the database. The book says that the tables can be created using
SQL script run from the SQL command line.
I cannot see any way of inputting SQL script into the WebLogic Server Admistration Console. Aslo there is no SQL Command line in DOS.
Thanks for your help.
Brian.

Sounds like you are to run the scripts provided by a tutorial to create the tables, right? In that case, you may need to install an Oracle client to connect to your database. The client is automatically installed with the database, so if you have access to the server that hosts the database, you should be able to run SQLplus from there.
As far as I know, there is no way to run a script from the Admin Console. I could be wrong, however.

Question about AHCI setting for my pavilion DV6T-2000 in order to use SSD driver with TRIM support

Hi
My operating system is Window 7 ultimate
1.I have just updated my ssd Corsair P256 firmware to the newest version which enables Trim
2.I typed " fsutil behavior query disabledeletenotify " and got the result " 0 " , so it is good.
3.I go to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci" and know that the "Start"name has Data value "0".
4. I go to device manager and click on "IDE ATA/ATAPI controllers". However, the only thing which i saw was:
"Intel(R) PCHM SATA AHCI Controller 6 Port"
i didn't see the "Standard AHCI 1.0 Serial ATA Controller"
i tried to go the Bios setting to enable AHCI but HP bios won't let me change any setting except Booting priority. I am using the newest Bios version from HP(I have just updated it two days ago).
So my question is that: am i on set? or what i should do now to make the Trim work
if i am on set, does the Trim run automatically? do i need to do anything to maintain the SSD's performance?
thank you

If you right click on "Intel(R) PCHM SATA AHCI Controller 6 Port" and select properties, then go to the Driver Tab and hit the Driver Details button, you will see the iastor,sys driver is installed, so AHCI is enabled.

Questions about creating sets using FM

Similar Messages

Maybe you are looking for