Questions About DNG

1) Is the Current DNG 5.5 only useable in CS4?
2) I notice that support for cameras is shown for both RAW and DNG. Since DNG is supposed to be universal, what is the down side of using DNG to run raw files from cameras such as the Canon 7D? Should I be using DNG 5.5 on CS3 for this camera? An earlier one?
3) What would be the observable differences between a supported and non-supported when converting to DNG?
Message was edited by: Hudechrome

1) Is the Current DNG 5.5 only useable in CS4?
The DNG converter is a stand-alone program, i.e. it is running without CS, LR or Bridge. 5.5 is the version of the program code (click on About in the dialog). The "usability" is determined rather by the version of the DNG format: older versions of CS do not support features, which have been introduced in newer DNG format versions.
The DNG format can be selected in the DNG converter dialog: Change Preferences -> Compatibility.
As the Canon7D does not require any new features, the resulting DNG file can be used in CS3 or even in CS2, even if the conversion specifies a higher DNG version.
3) What would be the observable differences between a supported and non-supported when converting to DNG?
If the DNG converter does not support a camera, it will not process the file. The speciality in this particular case is, that the 7D is not mentioned as "supported", because the support is preliminary.
It's file extension is supported but the 7D is not. Therefore conversions are possible
The file name extention is irrelevant. All newer Canon raw files have the extention CR2; that does not mean, that the camera is supported by ACR or the DNG converter.
We are seeing a magenta cast to clipped highlights from the 7D in ACR
Try reducing "Blacks".
the files from the 7D appear noisy, even the iSO 200 files
The 7D is about as noisy as the 50D at low ISOs, and less noise from 1600. However, all copies exhibit a vertical banding. It depends on the copy, at which intensity and how strong it appears. I have not seen it with ISO higher than 400, and it occurs usually in the 9th and 10th stop of the dynamic range, i.e. you have to increase the intensity a lot (exposure, brightness, fill light) in order to see it (and blacks = 0).
Here are two samples for the banding, 100% crops:
Gabor

Similar Messages

  • Questions about DNG Profile Editor recipe code

    I have been playing around with DNG Profile Editor. With a text editor I made the following recipe:
    I have some questions:
    1. Right now I have my control points at 60 saturation. Will using two points for each color (say 70 and 40) make my changes more consistent across darker and lighter shades of the specific color?
    2. Does DNG Profile editor respect HueLow and HueHigh, are they just placeholder numbers, or are they ignored if two points are close to each other?
    3. What does FeatherAdjust do? I'm guessing it controls the rate of drop off of the corrections. Is the value respected by DNG Profile editor when it creates a profile?
    Thanks for your time and attention,     -Bruce.

    1. For now DNG-only. Here's why:
    http://labs.adobe.com/wiki/index.php/DNG_Profiles_FAQ#PEOnlyDNG
    http://labs.adobe.com/wiki/index.php/DNG_Profiles_FAQ#WhyNameDNGPE
    http://labs.adobe.com/wiki/index.php/DNG_Profiles_FAQ#WhyPESeparate
    2. Standalone for now. See above links for why.
    3. Use the 'Preview Color Changes' option in the Options menu.
    4. You can use 'Apply Raw Adjustments' in the Options menu to see your raw adjustments. This is __not__ recommended for building a general-purpose profile because you are then optimizing a profile with specific image adjustments in mind, rather than building a profile based more on the inherent camera characteristics.
    5. True, that is a limitation of this implementation.
    6. I am not sure what you mean. The Chart Wizard automatically optimizes the color patches in a test shot based on reference values for many physical charts, which is more practically useful than the numbers printed on the reference card that comes with the chart.
    7. Make sure you avoid color casts in the bottom row. The PE is picky about making sure your gray patches are relatively neutral. It is an attempt to help you get a better profile.
    8. Use 'Show Affected Colors' from the Options menu.
    You may wish to read this page carefully and thoroughly:
    documentation
    It is the reference online documentation for the DNG Profile Editor and a few of the things you wish to do, such as preview all color changes, apply raw adjustments, and visualize the extent of each color adjustment, are all documented there.

  • Question about dng profiles

    Question for Eric or his coworkers ...
    Is there some limitation regarding size of LUT in the a dng profile? Biggest profiles produced by Adobe have 90x16x16. For profiles made with my program I'm using bigger LUT (120x16x61), in order to reduce slight banding issues and improve precision in shadows. I posted some of those profiles on CHDK forum when people were asking about them, and lately, I posted a profile for Canon 40D because Noel wasn't satisfied with sky saturation using Camera Standard
    I'm asking this because ACR 6.5rc1 crashed 3 or 4 times so far, reporting an error, so I returned version 6.4. Also, ACR 6.5 published a day or two ago had some problems with screen refreshing after zooming a cropped image (so I reverted to 6.4 again). All previous versions were working flawlessly
    I'm using Windows XP 32 bit, computer has 4 GB RAM

    I suppose it's not because of profile, as I didn't have any problems until ACR 65rc1, but just want to make sure
    If it is, I can make smaller one for you (just it would be slightly less accurate)
    About refreshing problem (6.5 release), I opened a group of raws from 400D. First one had a crop made previously. When I zoomed it, nothing happened (I think I was using Ctrl, as I wasn't in a zoom pane, but I'm not sure). Then selected the second photo and returned to the first one. It appeared zoomed now. Strange.
    Edit: tried editing some older Canon SX110 raws (dng) with ACR 6.5 again. Selected a group of about 100 photos, selected all of them, zoomed all of them at the same location to correct a bad pixel on some photos with spot removal tool. After correcting 10-15 photos, I got an error "The operation could not be completed". If I close error message, the same error window reopens again ...

  • Question about .DNG...

    The DNG format is basically a RAW format, right? So when i shoot in RAW (in Nikon, it's called .NEF), there is no processing of the image "in camera", like:
    - sharpening
    - noise reduction
    - white balance
    When i import the photos (converted to .DNG) into LR, some settings are made automatically:
    - Sharpening: 25
    - Color noise reduction: 25
    - Brightness: 50
    - Contrast: 25
    If these settings were set to "0", that would make the photo purely untouched, right? A pure RAW file with no adjustments. I'm assuming these settings are set to make the photo more pleasing "out of the box". Am i right?
    Also, my Nikon D50 has excellent in-camera noise reduction when i shoot in .jpg. Is LW's noise reduction slider linked to the excellent D50 noise reduction? Or is LR simply applying it's own noise reduction? I'm assuming (and hoping) that it's using the D50's noise reduction because 1) there are only 2 sliders for noise reduction, and 2) the noise reduction is extremely fast!
    Thanks for all your help!
    John

    John you pretty much have it. Though I would not count on any companies
    products trying to apply sharpening or anything else so that it matched what
    the in camera version did. For one thing companies like Adobe may not have
    access to how that is done. Second of all there are better ways of doing all
    of that. The processing capabilities of cameras are very limited. They have
    to be in order to shoot pictures and get them done so you can shoot another
    one. If you had powerful in camera processing with sophiticated routines you
    would end up shooting a picture and then 10 minutes later to was finally
    written to the card with all of the processing done. Cameras while a distant
    cousin to computers are not computers.
    In fact based on what I have seen for things like in camera sharpening, etc.
    you are much better off turning all of that off or shoot raw so that your
    images aren't affected and doing the job right in LR or Photoshop. You can
    always do a better job and with a lot more control.
    Also, right now the noise reduction and sharpening in LR just plain sucks.
    So these things do need to be done in Photoshop and noise reduction needs a
    third party plug-in because the noise reduction even in Photoshop sucks.
    As for what Andrew said about Meta-Data. Adobe does know which cameras have
    things that get lost going from the camera RAW format to DNG format. Adobe
    needs to publish this information so that we know. The longer Adobe keeps
    things like this in the dark the longer it will take for DNG to be fully
    accepted. It comes across as Adobe hidding something very bad, otherwise
    they would spell it out.
    As for RAW files being digital negatives well that make more sense than
    anything else. Digital cameras will never have a true negative option RAW is
    it. As for DNG being the envelope your negatives and prints come back to you
    in. Well, maybe but that isn't how 99.99% of people look at it and comments
    like those from Andrew only serve to confuse people because now people will
    read what he said and then think DNG files aren't RAW files and they are.
    For some reason people like to pick nits instead of just answering the
    question using the information and terms that the rest of the world uses and
    understands. There is no need to confuse and it doesn't matter what DNG
    technically is for the consumer and photography worlds it is Adobe's open
    standard RAW format.
    Robert

  • Some questions about DNG PE

    With a good calibration in 5000K lightning condition I have tweaked my 4.4 profile to match the ideal color value (read by spectrophotometer) of my CC so that the final average error is near DE2000 one.
    1. Is a good idea report this calibration setting in Color Matrices pane *before* create the two color table with chart wizard?
    2. Indeed my intent is to leave to profile the first management of the tone mapping like in the early version of ACR, because I don't understand the new Adobe approch. Why tweak only hue and saturation?
    3. Is it different starting from the 4.4 profile or from AS profile in DNG PE?
    4. What tollerance I have in lightning condition for the targets capture? For example, I shot the targets in 3200K and 6000K condition, is this a problem for the final result?
    Thank you and sorry for my English
    Marco

    > With a good calibration in 5000K lightning condition I
    > have tweaked my 4.4 profile to match the ideal color value
    > (read by spectrophotometer) of my CC so that the final
    > average error is near DE2000 one.
    > 1. Is a good idea report this calibration setting in Color
    > Matrices pane *before* create the two color table with
    > chart wizard?
    Yes.
    > 2. Indeed my intent is to leave to profile the first
    > management of the tone mapping like in the early version
    > of ACR, because I don't understand the new Adobe approch.
    > Why tweak only hue and saturation?
    You can tweak hue, saturation, and value (lightness). However, the lookup tables are only indexed by hue and saturation. This makes the LUT essentially 2.5D (indexed by 2 dimensions, and each table entry has 3 components).
    The new approach explained in DNG 1.2 (and implemented starting in Camera Raw 4.5 and Lightroom 2.2) is a proper superset of the earlier approach. That is, everything you could do before can also be done with the new approach; plus there are things you can do with the new approach (such as saturation-dependent hue twists) that could not be done with the old approach.
    > 3. Is it different starting from the 4.4 profile or from
    > AS profile in DNG PE?
    When defining your own color adjustments manually, yes, it matters which base profile you start from.
    When you are using the Chart Wizard, it does not matter which base profile you start from.
    > 4. What tollerance I have in lightning condition for the
    > targets capture? For example, I shot the targets in 3200K
    > and 6000K condition, is this a problem for the final
    > result?
    I would not worry about the 6000 K end; with 3200 K you may notice a bit more discrepancy since small changes in color temperature at the low end of the scale can account for larger color shifts.

  • Question about DNG converter in Bridge CS4

    Hello,
    I just installed Photoshop CS4, When I updated, it downloaded a hefty update (199 megs), so my setup now is:
    Win XP pro
    Bridge 3.0.0.464
    Camera RAW 5.7
    Photoshop CS4 11.0.2
    My Camera is a Panasonic Lumix FZ150 ( 2011 vintage)
    I have downloaded the Adobe DNG converter 6.6.0.261
    Every thing seems to be working fine so far, except:
    In Bridge when I "get Photos from Camera" the DNG conversion doesn't work. When I use the standalone converter it works fine.
    From reading past material on this forum I am assuming this is due to the fact that Bridge is older than my camera, and doesn't recognize the format.
    The questions:
    1. Does Bridge have its own built in DNG converter that is not upgradeable separately?
    2. If 1 is correct, is there a way to point Bridge to the location of the standalone converter so the work flow can be optimized.
    3. Since Bridge is not doing the conversion, but only importing the files, does the "Apply metadata" section of that window actually do anything? Should I bother to fill in any of those boxes?
    Thanks for any help.

    I posted a similar question quite a while ago, and what I learned was that Bridge has a DNG converter built in, but it's using ACR to read the file before it can convert. So you need ACR support for your camera.
    AFAIK there's no way to point Bridge to a standalone DNG converter.
    I suggested an updateable DNG converter plugin for Bridge, don't know why nobody listened...I thought it was an excellent idea
    As for the metadata, you just have to try. I don't know if it can write metadata when it can't read the file.

  • Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

    Hi I have a question about shooting in Raw with my Canon EOS 6d.
    I'm in the process of learning photography and my goal was to start shooting in raw.
    I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
    In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
    I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
    Heather

    In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
    That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
    Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
    I'd appreciate any advise on which route to go and how upgrade and what it may cost.
    It all depends on your preferred workflow and your budget.
    Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
    Camera raw, DNG | Adobe Photoshop CC
    Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
    Creative Suite 6
    Or join the Cloud and pay the monthly fee
    Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

  • Several Questions about Aperture Problems

    Having used Aperture for some time, and being a Mac user since 1985, I have a list of questions about Aperture that I need help with.
    1. Periodically operating the sliders will make an image turn black. Sometimes this is early in a session, sometimes late. Various workarounds will bring the image back, but once this starts, quitting seems the only option. Can anyone help me with why this happens and how to stop it?
    2. About 20% of the RAW files from my supported camera display the Unsupported Image Format error screen. These files operate perfectly in the manufacturers software and in other image management software that does not use the OS RAW libraries. Can someone help me with the cause of this and the solution (not a "workaround" but a way to make it stop happening).
    3. ALL of my RAW files from my supported camera, when I try to lift metadata, return the error message that there is no metadata to lift. But in fact, the metadata inspector displays metadata. How can I stop this from happening and experience normal metadata lifting?
    4. When I use the DNG format from my supported camera, a great many EXIF fields do not display, such as lens data. Can someone help me with DNG files, since these never generate the UIF error screen (cf. #2 above) as the manufacturer's RAW files do. I'm forced to use DNGs to have all my shots, but the EXIF data is not fully displayed.
    5. Today I opened Aperture and no previews would display. Aperture froze while updating thumbnails. I'd not done any non-routine edits or imported any unusual files or formats. Aperture then would not quit. Is it safe to attempt to restart Aperture?
    6. At times Aperture slows to the point of not working at all. Long pauses simply in trying to enlarge the selection circles for redeye removal, for example. What would cause Aperture to slow down without warning at any point in the workflow? How can I experience a more consistent operating speed from Aperture.
    7. How do other image management programs like Lightroom compare on these points? Is Aperture typical or should I seek a change in my workflow, improvement in my hardware, or some adjustment in my installation?
    Info: MacBook Pro, 4 GB RAM (apple), 320 GB drive, 45 GB free on drive; library of 3800 images. Fewer than 12 projects.
    Thanks for your assistance.

    n #3. It looks like you're absolutely right on this. I went back and checked on photos I'd edited and there was the altered metadata. +Many thanks for dispelling that concern!+ I love being a happy camper. Check that one off the list!
    On 1, I've followed the black-screen issues and pretty much all we know is that a workaround exists--usually selecting the crop box restores the picture, but a lot of times it blacks out again. Having used Apple products over 25 years, all of which was in my adult professional life, I haven't seen Apple willing to just let users tolerate an irritating "workaround." I think this is something that needs fixing.
    On 6--I don't understand how the rotational speed would produce erratic performance issues. I can go a month of reasonable performance, and then suddenly things bog down. Also, if that is the reason, this really ought to be part of the System Requirements, or at least, a recommendation. Maybe it is already--I should check to be sure. I confess this is one aspect I had not thought about.
    Thanks so much for thinking about these. I love my Apple products and have owned almost every generation of Mac since the "Fat Mac" (512K RAM! 800Kb Floppies!) and hate to stare at the screen and think I've been given a truly poor product--not in my DNA--but these things break my heart.
    Message was edited by: LawsonStone
    Message was edited by: LawsonStone

  • Questions about your new HP Products? HP Expert Day: January 14th, 2015

    Thank you for coming to Expert Day! The event has now concluded.
    To find out about future events, please visit this page.
    On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us.  We hope you will return to the boards to share your experiences, both good and bad.
     We will be holding more of these Expert Days on different topics in the months to come.  We hope to see you then!
     If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
    So, what is HP Expert Day?
    Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
    Ok, how do I get started?
    It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
    We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
    What if I need more information?
    For more information and a complete schedule of previous events, check out this post on the forums.
    Is Expert Day an English-only event?
    No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
    Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
    Korean Forum: January 15th 10am to 6pm Korea Time
    Simplified Chinese Forum: January 15th 10am to 6pm China Time
    Looking forward to seeing you on January 14th!
    I am an HP employee.

    My HP, purchased in June 2012, died on Saturday.  I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank.  When I turned it on, I got a Windows Error Recovery message.  The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything. 
    I'm not happy with HP.  Any suggestions?

  • Have questions about your Creative Cloud or Subscription Membership?

    You can find answers to several questions regarding membership to our subscription services.  Please see Membership troubleshooting | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html for additional information.  You can find information on such topics as:
    I need help completeing my new purchase or upgrade.
    I want to change the credit card on my account.
    I have a question about my membership price or statement charges.
    I want to change my membership: upgrade, renew, or restart.
    I want to cancel my membership.
    How do I access my account information or change update notifications?

    Branching to new discussion.
    Christym16625842 you are welcome to utilize the process listed in Creative Cloud Help | Install, update, or uninstall apps to install and evaluate the applications included with a Creative Cloud Membership.  The software is fully supported on recent Mac computers.  You can find the system requirements for the Creative Cloud at System requirements | Creative Cloud.

  • Questions about using the Voice Memos app

    I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
    -Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
    -When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
    -In your opinion, how is the recording quality of the voice memos app?

    You cannot import your Android voice memos to your iPhone's voice memo app.  You might be able to play the Android memos and have the iPhone pick up the audio and record it.
    Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
    App quality is excellent.

  • Re: Question about the Satellite P300-18Z

    Hello everyone,
    I have a couple of questions about the Satellite P300-18Z.
    What "video out" does this laptop have? (DVI, s-video or d-sub)
    Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
    What is the warranty on this laptop?

    Hello
    According the notebook specification Satellite P300-18Z has follow interfaces:
    DVI - No DVI port available
    HDMI - HDMI-out (HDMI out port available)
    Headphone Jack - External Headphone Jack (Stereo) available
    .link - iLink (Firewire) port available
    Line in Jack - No Line in Jack port available
    Line out Jack - No Line Out Jack available
    Microphone Jack - External Micrphone Jack
    TV-out - port available (S-Video port)
    VGA - VGA (External monitor port RGB port)
    Also you can connect it to your LCD TV using HDMI cable.
    Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

  • Some questions about Muse

    First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
    The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
    It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html).  I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
    Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
    A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
    The hits from Facebook have sometimes very long links, eg.
    (http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident,  moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
    The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but  the text after export and moving cursor into it does not change color for some reason.
    I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
    The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
    The comments Disqus do not load, especially at horizontal layouts  (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
    YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
    Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
    On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
    This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
    Is it possible to make an option of  scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
    Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
    I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
    In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
    According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
    The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
    Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
    I’m using Adobe Muse 7.2 on OS X 10.9.1.
    and I'm sending Muse file to <[email protected]>

    Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
    Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
    Here is the link to the old forums- http://support.muse.adobe.com/muse

  • HT201303 hi just got my new apple ipod touch i need to update my security information other wise it wont let me download apps it says to enter three questions about myself and i get to the third question and it wont let me enter the third question

    hi just got my new apple ipod touch and to download apps it wants to add questions about myself for more sercurity information. i get up to question 3 and it wont let me select a question but it will let me write an answer so i just pressed done and then it says i cant carry on because ive mised out information when it wont let me do a question!

    Welcome to the Apple community.
    You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
    I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
    If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

  • Just installed iOS6, questions about "iMessage" and other things...

    I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
    First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
    In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
    Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
    I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
    Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
    Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
    Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
    Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
    Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
    Finally, what is the Notification Center used for?
    If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
    There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

    Hey Taantumus!
    Here is an article that will provide some guidance on this question:
    Apple ID: Changing your password
    http://support.apple.com/kb/ht5624
    The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

Maybe you are looking for