Questions about exporting PSDS(so as PNG, TIFF with transparency) by AI CS4 and newer

Hello, I've got this question as titled...I stll can't figure it out why.
I'm now using WIN version of AI CS6, and I've used CS4, CS5 before.
Why does AI CS4(and the newers) export transparent PSD files which are always with blank transparent thin border(about 2~3px) line in the right and down side ?
This situation hasn't happened in CS3 and CS2.
The PSD files I intended to export are about A4 size with 300 dpi, sometimes with 150dpi, in RGB/CMYK/Grayscale color modes.
If  someone as well-experienced as all you seniors can tell me the reason or even solutions i'll be very thankful to your reply.

Thank your reply first
I totally agree with your opinion, it's really an annoying bug.
I've tried your solutions before but it's still time-comsuming to correct the with/length.
Sometimes I think the new version AI kind of rediculous because it can't export as accurate as the CS2/CS3's exporting, which should have functioned well.
On the other hand, I can also save my AI file with PDF capability and drag it into PS to rasterize, then I can get accurate PSD files.
But save AI with PDF cab. takes much time, even more when there are complex objects (or) with multiple appearance features and occasionally fails to save and get a broken AI file.

Similar Messages

  • I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I c

    I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • Png files with transparent background show black only in firefox for android

    I have a wix created site and png files with transparent backgrounds are showing with a black blackground in Firefox for Android. They show transparent in all other browsers I have tried.
    I have tried saving the file as a gif, as a smaller png, interlaced, not interlaced, png 8, png24. It still shows black in Firefox for Android.

    Hi evelswoman,
    Thank you for your question. This sounds like a good one for the web compatibility team. Currently there are some compatibility documentation for background-image here: [https://developer.mozilla.org/en-US/docs/Web/CSS/background-image] and more details on background: [https://developer.mozilla.org/en-US/docs/Web/CSS/background]
    Filling a bug with webcompat.com with an example url can go a long way as well, I hope this helps.

  • Save jpg or tiff with transparent background

    How do you save a jpg image of something (ART) created with a transparent background so that it can be printed on fabric?

    AppleWorks doesn't handle transparency well, even using formats such as .gif or .png saved with transparent backgrounds in another application. However, a few years ago I accidentally discovered that if an object is flipped or rotated in AppleWorks, the background will become transparent. The object doesn't even have to be .gif or .png & have transparency.
    Once I discovered this, I used GraphicConverter to flip an image horizontally & save it as a PICT. Then I insert the object in my AppleWorks document & flip it back. I use PICT because it is the only graphic format that will retain the native resolution. All other graphic formats are changed to 72 dpi by AppleWorks.
    Unfortunately, the last few times I tried this, it no longer worked. For myself, I use Pages for this kind of work now. I handles transparency very well.

  • Sql developer: question about exporting data

    Hi,
    we're recently working with sql-developer. i've got a question about how we can export query results to txt/csv files for use in other applications.
    First a problem: if we start a query that looks like this:
    select * from
    select * from A where start_date = &date
    ) a,
    select * from B where start_date = &date
    ) b
    where a.name = b.name
    Sql-developer asks twice to input a value for the variable 'date', although it's the same variable and it's supposed to have the same value.
    We solve this by making a script:
    first we define the variable, then we put the query.
    When we start the script, the query runs ok and sql developer asks to input the value for the variable once.
    But now the result of the query is shown in the script output. The script output seems to be limited in number of lines and difficult to export.
    So my question is: what's the best way to export query results to txt/csv files, avoiding the problem mentioned above?
    i hope there is a solution where we can use a single query or script.
    Thanks in advance!

    Using bind variables like ":date" should solve the problem of being asked twice for the same thing.
    Executing the query normally (F9), gives you the export options you require through the context menu inside the Results grid.
    Regards,
    K.

  • Question about exporting FBL3N data in Pivot table format

    Dear all
    I have a question about the "exporting file" function of ECC 6.0.
    We started to use ECC 6.0 system, and it appears that we are no longer able to export "FBL3N data" to a local PC in pivot table format.
    Is there a way to do it?
    We used to be able to do so when the system is 4.6.
    I appreciate your support!
    Kind regards

    Dear:
                 You can do that. Execute report FBL3N with desired GL account in it. After when report has been executed right click on it. There will be an option Spread Sheet. Select all available format. In drill down select 08 (Excel in existing XXL format) and press OK. There you will get pivot table option for downloading., Hope this will help you resolve your query.
    Regards

  • I have a question about exporting a short movie to burn on a DVD.

    Ok, it's me again.  You guys were so much help last night, that I am back for another piece of advice.  I have made a short 23 minute movie in Premiere Pro CS3, using 200 still images and some music.  I realize that this program is way more than I need, but it is on my computer along with I Photo, I DVD, and I Movie - which are great programs for the quick little thing I am doing, but you can only choose 1 Transition between each still in all three of those programs and that becomes very obnoxious.
    Therefore, I used Premiere Pro CS3, but now I want to export it two times - once for a web site and once to burn it to a DVD to watch on a standard TV. Can anyone walk me through that - way, way to many choices and I tried reading the 11 pages in the user manual - it may as well been in a foreign language.
    Thanks to all.
    Michele

    Hi,
    If you have encore you can use that for the DVD...encore will take care of a lot of stuff for you automatically...
    What are your project settings ?  eg....  720x480 progressive, square pixels, 29.97 fps, 4:3 aspect ratio....etc.
    That will have a lot to do with how you export for the web...what settings you use..
    You will need to know what web based video size you want ( will it be smaller than your project (720 x480 ? )  for example?)
    Sooo, do you have encore?
    Can you supply project settings and info about what you want the web video to be

  • Question about external HD DVD (Blue Ray) players with Tecra M5

    I have a TECRA M5 laptop (running XP) although this question could be relevant to other laptop users with no internal HD DVD players.
    Is there an external (e.g. USB) HD DVD that I could connect to my laptop? So to watch HD movies on my laptop?
    If such a thing exists would it also plug directly to a HD TV (as my laptop has no HDMI)?
    Is there any way I could swap my existing internal DVD for a HD one?

    Oh man,
    I will show you why you _shouldnt_ think about buying an external drive for your machine.
    1. Yes, there are PLENTY of external HD DVD drives, mostly of them are connected trough USB
    2. You could plug it in your notebook, yes, and probably you could play HD DVD movies on your machine but NOT in HD since your display only supports a maximum resolution of 1024x768 pixels, but HD movies need at least a resolution of 1280x720. Any sufficiently fast computer with a 1280x720 or higher resolution display is capable of displaying HD video, even though computers are generally not advertised as such.
    3. No, you cannot plug it directly into a HD TV, I mean why dont you buy then a HD DVD player???
    4. Yes you could, but are you familiar enough with computers systems to exchange a drive which is built in your machine?? If you really would spend the money for the drive you should ask then spend some extra money for an technician. ;)
    Cheers

  • Question about Removing Permissions from the System Folder with chmod

    Hi
    I have a question about the removal of permissions from the System folder (and sub directories and files).
    Background
    Since installing a new HD, clean install of 10.6, application of updates and moving over backed up user directories I have had several issues with permissions.
    I have read several threads on this and using disk warrior and other tools I have been able to fix most of the issues.
    The Problem
    The issue that remains is a permissions check using Disk Utility keeps reporting
    ACL found but not expected on "System".
    followed by an extensive list of sub directories and all.
    Attempts to repair take hours and the same errors are reported.
    Found Solutions
    I have read about changing and/or completely removing the ACL from the permissions from the System using two different commands:
    sudo chmod -R -N ./System/* ( to remove all ACLs)
    or
    sudo chmod -R -E ./System/* ( to replace all ACLs )
    My Question is ( to the UNIX gurus):
    What is the difference between the usage with -E and -R and which is the best approach for a Systems directory and (subordinates)?
    Many thanks!!

    OK
    So I misread on the your instructions about the PW reset, did it, no harm in that. I did also select the options to reset all the permissions for all the accounts and the ACL issues were not resolved. My bad, I forgot to note that.
    You do suggest getting and expert opinion but alas these are rather elusive. In most cases the Apple solutions is to do a complete reinstall... I have found that unless you completely wipe a drive and rebuild everything there are often artifacts left behind. Since I have full and redundant back-ups I would rather explore and hack a little instead of a dull old system reinstall. The irony is the system issue I had was it was the result a reinstall and combo update on a new drive. I recognize the risks of entering the realms of the System folders but I am willing to explore knowing full well that I have a path to recovery.
    Thanks again for your insights. I come to the forums looking for insights and ideas but not a lecture...

  • HT204088 i have questions about my account im being billed by I-Tunes since Januaray 2014 and i have cancelled all my appssince the begining of the year 2014 i have only one app open and i havent played it yet  i need the billing to stop and an adjustment

    I have a question about my bill, im being billed on a steady basis and im not using my aaps on my itune account
    on 2-10-14  $10.68
    0n 2-9-14  $10.68 & $5.34
    on 2-4-14 $10.54
    on 2-2-14 $14.18 & $12.80
    1-30-14 $10.54
    1-27-14 $5.19
    and so on    but im not using n
    my i-tunes or playing games

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    What do you mean 'cancelled all my apps' ?
    Have you got any auto-renewing subscriptions ? There are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098
    Or does anybody else have access to your account and/or devices and may have made those purchases ? If nobody else has, and if they aren't auto-renewing subscriptions that you hadn't stopped, then you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/

  • Placing a PNG file with transparency

    If I have a psd / Png file on Photoshop that has text with no background (transparent), and I do a Place of that file into Illustrator, I get a white background in additiotion to the Text.
    How do I stop the white background from placing withing the Illustrator? I have Illustrator CS3 and Photoshop CS3
    Thanks in advance.
    Bob

    Half a decade later, I am getting the same problem as the original poster   (although I am using Illustrator CC 64bit on Windows 8).
    I am trying to 'place' a PNG graphic in Illustrator, The PNG has a transparent background, which is being honoured fine in other programs (e.g. web browsers - even in its icon in Windows Explorer).
    However when I place it in Illustrator, the transparency doesn't work: instead the background is displayed as an opaque colour. It stays that way if I output to a PDF from Illustrator.
    The PNG in question is a 'paletted' type (I think it has a palette of 256 colours) - one of which is set to be transparent.
    Does Adobe Illustrator not support transparency in paletted PNG files?
    (I'm aware that you can generate a 24-bit PNG with the transparency done as an 'alpha channel'), but this is wasteful for many simple types of graphic, creating a much bigger PNG file size.

  • Export a PDF to an image with transparency

    Hello,
    I'm trying to export a PDF (which contains a logo with 4 paths) as an image with transparency. In my case I use the PNG because it supports the transparency. As my logo is defined with paths it should be possible to create an image with transparency.
    Maybe this is a limitation and Acrobat cannot create image wich supports transparency.
    Anyone have an idea?
    Thanks in advance,
    Joe

    @Joe:
    That's a really pity.
    Have you found any other software which can do this job.
    I searched yesterday but didn't find anything.
    @Doc Maik
    b)
    I have a (lot) PDF containing a single image which has a transparent background.
    You can check that in Acrobat by menu: Edit - Preferences - Page Display - Show transparency grid
    I need to have a PNG or TIFF (these two formats allow transparency) of that image.
    That's all but as it seems to much for Acrobat to handle.
    "Save as ..." doesn't work in case of transparency!
    Thanks anyway.
    Best regards
    Norbert

  • How can I export a smallformat flatten PDF-file with transparant parts in?

    My post on a PDF - more clear with images (english):
    http://www.logicontrol.be/gallery/documents/help-eng.pdf
    Deze post in nederlandstalige versie:
    http://www.logicontrol.be/gallery/documents/help-nl.pdf
    Scope?
    I'dd like to export an Indesign-file (.indd) to a PDF-file that has to be:
    - the smallest possible file size
    - which displays images and text sharp on the screen
    - which also certainly remain transparent parts of .psd-files after exporting
    - that is flattened for easy print
    The problem?
    ▪ How and with which of settings can I export such a file from InDesign 5.0?
    ▪ If necessary in combination with some settings (after exporting) in our Adobe Acrobat 9 Pro?
    Further explanation
    The export file contains lots of text, graphics, photographs and drawings. Many of these items are .psd-files that contain transparent areas. The intention is that this transparent parts actually remain transparent even after exporting/flattening /decreasing the PDF.
    ▪ With InDesign 5.0?
    → In the window Export Adobe PDF: (images see: http://www.logicontrol.be/gallery/documents/help-eng.pdf )
    Should I start from a default PDF preset   (if yes > which one??)
    Possibilities are: High Quality Print / PDFX-1a: 2001 / PDFX-3:2002 / PDFX-4:2007 / Press Quality / Smallest File Size
    Or is it better to create a PDF preset on my own?     (if yes > which settings??)
    Standard > PDF/X-format?
    Compatibility > PDF-version?
    Compression > If artwork should be compressed and downsampled, and if so,
                            which method and settings to I have to use ?
    Ouput > How can I control colors and PDF/X output intent profiles in the PDF-file?
    Advanced > How can I control fonts, OPI specifications, transparency flattening, and JDF instructions are
                      in the PDF file?
    ▪ With Adobe Acrobat 9 Pro?
    → How can I reduce the file size extra, so more reducing after exporting into PDF ?
    → How can I flatten the exported file (if not done during the export) ?
    !! Important, when I export/reduce/flatten the file, I ‘dd like that the parts of images who were transparent before, stays also transparent after !!
    WHAT CAN I DO ??

    Hello,
    I'm sorry you're having trouble. Unfortunately, this forum is for the ExportPDF service of Acrobat.com. The ExportPDF service functions as a PDF to *.docx file convertion and we can't help with problems specific to the desktop version of Acrobat or InDesign.  I'm happy to point you in the right direction.
    Acrobat Users moderated forums:
    http://forums.adobe.com/community/acrobat
    InDesign forums:
    http://forums.adobe.com/community/indesign/indesign_general
    Good luck!

  • Png Files with transparency

    I'm wanting to use iPhoto to organize my scrapbooking graphics. Problem is that the majority are png with transparency. When I imported them, all of the transparent portions of the images appeared in black, so many of them just look like black squares, because it's a black image on transparent background.
    Is there any way to get the png to look normal or is this a flaw in iPhoto. Does iPhoto 6 fix this problem?
    Thanks.
    Rayne

    After doing a little more investigating, I realized that iPhoto is generating the thumbnails in jpg, therefore creating a non-transparent thumbnail. When the image is viewed full size, it appears fine. So it's just the thumbnail that is causing the problem.
    Is there a way to get it to generate thumbnails so that the transparent portions get filled with white instead of black? I use a white background in iPhoto so this would make them appear transparent. Or at least I'd be able to see the transparent portions better regardless of which background I use.
    Thanks.

  • Saving PNG file with transparency

    Hello!
    In my application I generate "BufferedImage"s with transparent pixels. When I try to write them using ImageIO.write() in PNG format, the transparency information is lost.
    Can anybody send me working code for this problem?
    Thanks,
    Norbi

    What are you using to view the PNG? Are you sure it is a viewer that supports PNG transparency? Internet Explorer and the previewer built into Windows do not fully support PNG transparency so maybe that's the problem. See http://entropymine.com/jason/testbed/pngtrans/ for more info. I know for a fact the following code will generate a transparent PNG. Photoshop will read the transparency correctly but IE won't.
        public static final void main(String[] args) {
            // Create a new image with an alpha channel
            BufferedImage image = new BufferedImage(100,100,BufferedImage.TYPE_INT_ARGB);
            // Get a Graphics2D object that interfaces to the Image
            Graphics2D g2 = image.createGraphics();
            // Draw a red circle on the image
            g2.setColor(Color.RED);
            g2.fillOval(0,0,100,100);
            try {
                // Write the image to a PNG file,
                //  the red circle will have a transparent background
                ImageIO.write(image, "png", new File(args[0]));
            } catch (IOException e) {
                e.printStackTrace();
        }Anyone know how to do the equivalent with Jimi? This:Jimi.putImage("image/png", image, args[0]); only writes the PNG with a black opaque background.

Maybe you are looking for