Questions about multiple nodes and licenses

Nico, What would be the right forum to ask the licensing questions i stated above? Jimit

I can't and won't discuss license issues, but for the last question (mixing nodes with different operating systems) there's a fairly easy answer why this can lead to all sorts of trouble.Windows and Linux/Unix usually work in different code pages, making it hard to interchange flat files.Text lines in Windows flat files are usually terminated by the two characters Carriage Return followed by Line Feed (0x0D followed by 0x0A) whereas under Linux/Unix text lines are always terminated by Line Feed characters (0x0a) only. Not all Windows and Linux/Unix programs can handle this difference without trouble.Very often Windows and Linux/Unix machines run with difference 8-bit code pages for the nodes themselves. This means that all sorts of diacritics (such as German Umlaute ä, ö, ü, ß) may be processed by programs on both platforms in different ways.Shell scripts and batch files resp. all sorts of operating system commands are very much incompatible between these systems, making it almost impossible (ok, just extremely difficult) to write scripts running on both system worlds.Last not least Integration Services in a server grid must be of the same operating system and run in the same code page, meaning that these two nodes will never be able to be part of the same server grid. That's just what came to my mind within a few seconds of thinking. Regards,Nico

Similar Messages

Question about multiple listeners and vip addresses in rac.

We have a 2 node rac cluster running 10.2.0.3 on rhel4 on the itanium platform. We have a need where we want to connect the 2 hosts up to another network temporarily by configuring an additional network interface on each server so that we can test some connections from a different network.
My question is can you configure multiple listeners on the same server in which the newly added listener can be configured to service requets on the new network interface?
Because it's rac would you need to configure an additional vip address? I am not sure that you can have multiple vip's on a server?
Has anyone configured rac in such a way, any help is appreciated.

can you configure multiple listeners on the same server in which the newly added listener can be configured to service requets on the new network interface?Yes, you can but you should not be doing this. Listener is a node specific resource and one listener can server multiple services. You actually can create multiple services within the database for different set of users and all can be registered to the same listener.
Because it's rac would you need to configure an additional vip address? What do you mean by additional IP?
You have installed 10g RAC where you have already configured virtual IPs. Why do you want to have additional one? node1 - static ip1, vip1, pvtip1
node2 - static ip2 vip2, pvtip2
total 6
I am not sure that you can have multiple vip's on a server?Nothing to do with the server, they are based on public IP. Yes you can create multiples vip's based on same public IP. This is possible, But you do not need to do this in RAC environment.

Question about multiple classes and Linked Lists

Lets say you have 4 classes: LinkedList which is the main class, Node, Card, and Hand. im not putting any constructors yet
The card class keeps track of a card such as a king of diamonds:
public class Card {
string suit;
string rank;
the node class has a Card object and another node object so it would be
public class Node {
Card c;
Node next;
the hand class keeps track of the users hand. This program will ask the user if they want to add, remove, print out the hand, or print out the score of the hand, I guess it would be like this
public class Hand {
Node head;
The linkedlist class will contain all the methods for doing the above
now my questions are. Lets say I want to add a card, so I would have to add a new Node which contains the card. If i wanted to access the new nodes card contents, lets call this node g, can i do, g.c.suit and g.c.rank in which this case c is the card object in Node. Also, these are not going to be nested classes, they are going to be 4 seperate classes, if I declare all variables as private will I need to extend the classes or not and if there is a better way, let me know. Thanks alot for all your help and previous help.

here is an example of Card and Hand ...
not saying its good design
but it does work
public class Cards {
public static void main(String[ ] args) {
Card c1 = new Card ("ace", "diamonds");
Card c2 = new Card ("two", "spades");
Card c3 = new Card ("three", "hearts");
Hand a1 = new Hand ();
a1.add(c1);
a1.add(c2);
a1.add(c3);
System.out.println("\nshowing hand ...");
a1.show();
System.out.println("\ndeleting " + c2.num + " " + c2.suite);
a1.del(c2);
System.out.println("\nshowing hand ...");
a1.show();
} // main
} // class
class Hand exists in 3 states
and is designed to be a chain of cards ...
1. when class Hand is first created
   a. it has no card
   b. and no nextHand link
2. when somecard is added to this Hand
   a. it has a card
   b. and the nextHand link is null
3. when somecard is attempted to be added to this Hand
   and it already has a card
   then a nextHand is created
   and the somecard is added to the nextHand
   a. so the Hand has a card
   b. and the Hand has a nextHand
class Hand {
public Card acard;
public Hand nextHand;
public Hand () {
acard = null;
nextHand = null;
public void add (Card somecard) {
if (acard == null) {
    acard = somecard;
    return;
if (nextHand == null) nextHand = new Hand();
nextHand.add (somecard);
delete this Hand by making this Hand
refer to the next Hand
thus skipping over this Hand in the nextHand chain
for example, removing Hand 3 ...
1 - 2 - 3 - 4   becomes
1 - 2 - 4
public void del (Card somecard) {
if (acard == somecard) {
    if (nextHand != null) acard = nextHand.acard;
    else acard = null;
    if (nextHand != null) nextHand = nextHand.nextHand;
    return;
nextHand.del(somecard);
public void show() {
if (acard == null) return;
System.out.println(acard.num + " " + acard.suite);
if (nextHand != null) nextHand.show ();
} // class
class Card {
public String num;
public String suite;
Card (String num, String suite) {
this.num = num;
this.suite = suite;
} // class

Question about multiple tables and formulas in numbers

I was wondering about having a formula that effects one table based on data in the other table. I have a spreedsheet that i created for work. In column A is a list of addresses. In column B-ZZ is a list of "billing codes" the get applied to the service work done for that address.Its kind of difficult to look at this large spreadsheet on my iphone and edit it on the go. Is there a way to, Have another column, possibly on sheet 2 or something, where i type in these "billing codes" and they would fill an x or some other character in cell that corrisponds with that billing code on that address line? So to be as plain as possible, I want to enter data in one cell (another sheet if possible) and have it "mark" another cell in response to the specific data on that "entry cell." Im thinking this way because instead of scrolling back and fourth on the sheet on my iphone, to "mark" the boxes, i could just navigate to sheet 2 enter the data, or "billing codes" and they would "X" the cell that would match up with the code column and address row. each address row would have a seperate "entry field" in sheet 2, to make the formula easier. thanks for any help

Tom,
That's a lot of columns for jsut a table of marks that reflect an input. Sure, you could have each cell in that giant table check to see if some corresponding cell contains certain text, but that document is going to be slower than you might be able to tolerate.
Jerry

Question About Color's and Gradients

Hi all,
I have a question about color swatches and gradients.
I am curious to know, if I have 2 color swatches that I make into a gradient color, is it posible to change the tint of each indivdual color in that gradient and have that applied to the gradient without having to adjust the gradients opacity.
The reason that I'm asking this is because in creating a project I found that the colors that I chose for to make my gradient from my swatches were to dark, and while I can adjust each one's tint to my liking (if the object they were applied to was going to be a solid color) but that doesn't seem to apply to the overall gradient.
I hope that makes sense, I know that this was something that was able to be accomplished in quark and was wondering if I can do something similar.

If you double click your gradient swatch (after adding it to the swatches)
Then click a colour stop in the gradient, and then change the drop down menu to CMYK (or rgb)
And you can alter the percentages there. It's not much use for spot colours but it's a start.
But making tint swatches would be a good start anyway.
At least then when you double click the gradient (in the swatches) to edit it you can choose from CMYK, RGB, LAB, or Swatches and adjust each colour stop to your liking.

Question about clear page and reset pagination

Hi,
I have a question about clear pages and the reset pagination in an URL. What is the reason why a clear page doesn't also trigger a reset pagination on the pages which are cleared?
I can't really imagine a business case where it makes sense to clear all data of page items on a page and don't reset the pagination of reports on that page which probably use a page item in there where clause...
The drawback of this behavior is that a developer always has to set the reset pagination checkbox when he clears the target page and the even bigger drawback is that if you specify other pages to clear, you can't reset pagination for them, because reset pagination only works for the target page.
Thanks for your input.
Patrick
*** New *** Oracle APEX Essentials *** http://essentials.oracleapex.info/
My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/

Enhancement request filed, thanks,
Scott

The question about portlet customization and synchronization

I have a question about portlet customization and synchronization.
When I call
NameValuePersonalizationObject data = (NameValuePersonalizationObject) PortletRendererUtil.getEditData(portletRenderRequest);
portletRenderRequest.setPortletTitle(str);
portletRenderRequest.putString(aKey, aValue);
PortletRendererUtil.submitEditData(portletRenderRequest, data);
Should I make any synchronization myself (use "synchronized" blocks or something else) or this procedure is made thread-safe on the level of the Portal API?

HI Dimitry,
I dont think you have to synchronize the block. i guess the code is synchronized internally.
regards,
Harsha

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

A few questions about the ka790gx and dka790gx

i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section. There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
"""Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
It's better than nothing, but only just."""

General question about iTunes Match and multiple libraries

Hello to everyone,
I have a general question about the iTunes Match service, which is available since yesterday in my country (Italy). Currently my library situation is the following:
Computer A (desktop, Windows 7): "big" iTunes library (about 20 GB), at the moment not associated with my Apple ID
Computer B (MacBook Air 2011): "small" iTunes library (about 5 GB), associated with my Apple ID
At the moment, both my iOS devices (iPhone 4 and iPad 2) are synchronized with the smaller library on the MacBook Air.
Question is as follows: should I subscribe to iTunes Match, would it be possible to upload the "big" library (provided I associate it with my Apple ID) to iCloud while keeping my devices synchronized with the "small" one?
Ideally, at the end of the day, the situation should be the following: both iOS devices with music from the small library + possibility of downloading songs from iCloud (coming from the big one). Is this possible?
Maybe the question sounds stupid, but I want to be sure about this before paying for the service.
Thanks a lot.

Yes, you could also associate your larger library with iTunes match if you associated your Apple ID with it. However any purchases in the library made from another Apple ID will not be matched with iTunes much.
If both libraries are part of iTunes match, then all your devices will see all of the content from both libraries, which content you choose to have on those devices and which you have accessible via iTunes match is entirely up to you.

Question about dependent projects (and their libraries) in 11g-Oracle team?

Hello everyone,
I have a question about dependent projects. An example:
In JDeveloper 10.1.3.x if you had for instance 2 projects (in a workspace): project 1 has one project library (for instance a log4j library) and project 2 is a very simple webapplication which is dependent on project 1. Project 2 has one class which makes use of log4j.
This compiles fine, you can run project 2 in oc4j, and the libraries of project 1 (log4j) are added on the classpath and everything works fine. This is great for rapid testing as well as keeping management of libraries to a minimum (only one project where you would update a library e.g.)
However in 11g this approach seems not to work at all anymore now that weblogic is used, not even when 'export library' is checked in project 1. The library is simply never exported at all - with a noclassdeffound error as result. Is this approach still possible (without having to define multiple deployment profiles), or is this a bug?
Thanks!
Martijn
Edited by: MartijnR on Oct 27, 2008 7:57 AM

Hi Ron,
I've tried what you said, indeed in that .beabuild.txt when 'deploy by default' is checked it adds a line like: C:/JDeveloper/mywork/test2/lib/log4j-1.2.14.jar = test2-view-webapp/WEB-INF/lib/log4j-1.2.14.jar
Which looks fine, except that /web-inf/lib/ is empty. I presume its a sort of mapping to say: Load it like it in WEB-INF/lib? This line is not there when the deploy by default is not checked.
I modified the TestBean as follows (the method that references Log4j does it thru a Class.forName() now only):
public String getHelloWorld() {
try {
Class clazz = Class.forName("org.apache.log4j.Logger");
System.out.println(clazz.getName());
catch(Exception e) {
e.printStackTrace();
return "Hello World";
In both cases with or without line, it throws:
java.lang.ClassNotFoundException: org.apache.log4j.Logger
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:42)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:169)
     at nl.test.TestBean.getHelloWorld(TestBean.java:15)
Secondly I added weblogic.xml with your suggested code, in the exploded war this results in a weblogic.xml which looks like:
<?xml version = '1.0' encoding = 'windows-1252'?>
<weblogic-web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-web-app.xsd" xmlns="http://www.bea.com/ns/weblogic/weblogic-web-app">
<container-descriptor>
<prefer-web-inf-classes>true</prefer-web-inf-classes>
</container-descriptor>
<jsp-descriptor>
<debug>true</debug>
<working-dir>/C:/JDeveloper/mywork/test2/view/classes/.jsps</working-dir>
<keepgenerated>true</keepgenerated>
</jsp-descriptor>
<library-ref>
<library-name>jstl</library-name>
<specification-version>1.2</specification-version>
</library-ref>
<library-ref>
<library-name>jsf</library-name>
<specification-version>1.2</specification-version>
</library-ref>
</weblogic-web-app>
The only thing from me is that container-descriptor tag, the rest is added to it during the deployment. Unfortunately, it still produces the same error. :/ Any clue?

Question about saving calendar and contatcs

Good Morning to all ,
I have a question about how to transfer the calendar and contatcs files to the new outlook profile after a imap migration. So what is the best way to transfer this kind of data before the imap migration for example to prep 70 machines? Any Powershell or
vbs script to save the calendar and contatcs into a pst file?
Thank you in advanced.
Thiago.

So what is the best way to transfer this kind of data before the imap migration for example to prep 70 machines? Any Powershell or vbs script to save the calendar and contatcs into a pst file?
Without knowing Outlook version involved and/or whether there are any additional email accounts configured in any given profile beyond the one being migrated to IMAP - some general comments
#1 - Simply add the same email account as an IMAP account to the same profile. That will result in the "default data file" remaining the same which contains the default "contact & calendar" folders. There is nothing that limits the
same email account to be configured with multiple protocols unless there is a setting that also needs to be set at the server level (i.e. GMail)
#2 - Delete the related "non-Imap" account from the profile - that is has no impact on the data file associated with the account
At a minimum - Contacts/Calendar folders remain as is with the only caveat being that the email folders in the original PST file will contain data which you (your users) may or may not want to completely get rid of (something you may want to check/confirm
beforehand)
Karl Timmermans [Outlook MVP] "Outlook Contact Import/Export/Data Mgmt" http://www.contactgenie.com

I bought a Canon 8400F scanner- question about multiple photos being scanne

Hi,
I have a question about about scanning photos. It was posted that if you scan something with multiple photos, it will separate the pictures.
If I put 6 pictures on the scanner, will it automatically scan them and separate them, or is there something in the software where I select it to separate each picture.
Thank you

I'm not at my Mac right now but it should be real obvious in the CanoScan software. Open it up and play around. It will jump out at you.
You don't tell it to select "each" picture. You merely tell it that there are multiple pictures and it then does everything automatically.

Question about Id3-tags and song managem

Hello, I am getting ready to buy a Zen Touch 20GB in a couple of weeks and I have a few questions about the management software.
(Correct me if I am wrong about something)
) Are songs organized into groups by Genre instead of just folders like on the Ipod?
2) Are Id3-tags used instead of filename for identification?
3) What parts of the tag are needed besides title and artist?
4) Which version of tags does the Zen Touch recognize: Version or Version 2?
5) If I edit my tags using an external program such as Id3-TagIT, will the tags carry over to the Creative software and to the player?
Thanks a lot for your help. I want to make sure I have my music collection in order before I get my Zen Touch.

euph_jay wrote:Ok, so lets say I have all my music in folders right now seperated into different categories on my hard dri've. Some folders denote the artist, some the album, and some a genre. Example: Folder: Chicago Contents: Chicago .mp3 files Folder: Techno Contents: various Techno artist's songs What is the best way of organizing my folder system, so that the transition will be easy to the player?
Folders are pretty much irrelevant. What the software will do is look at the *tags* in the files and then use these to build the player's library.
Will imbedded folders work on the player? (like Techno->Crystal Method->Cystal Method .mp3's)
Again the player has no concept of folders, although if you set Techno as a Genre tag you will be able to view via this in the Music Library.
Or, am I misunderstanding how music is stored into the mp3 player. Instead of storing music in a "folder like" system (like the Chicago folder or Techno folder), does it store all the songs individually on the device? Then you have to sort it by artist, album, or genre?
Using your example, in the Music Library you have essentially three categories: Album, Artist, and Genre. So under Album you would see "Vegas" (the Crystal Method's album), under Artist you would see "The Crystal Method", and under Genre you would see "Techno" (and then either the album or artist under this... I forget which it is offhand).
Make sense?

Few questions about apex + epg and cookie blocked by IE6

Hi,
I would like to ask a few questions about apex and epg.
I have already installed and configured apex 3.2 on oracle 10g (on my localhost - computer name 'chen_rong', ip address -192.168.88.175 ), and enable anonymous access xdb http server.
now,
1. I can access 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' without input username / password for realm 'XDB' in IE6;
2. I can access 'http://localhost/apex/apex_admin' , 'http://192.168.88.175/apex/apex_admin' , and I can be redirected into apex administation page after input admin/<my apex admin password> for realm 'APEX' in IE6;
3. I can access 'http://chen_rong/apex/apex_admin' in IE6, but after input admin/password , I can not be redirected into administation page, because the cookie was blocked by IE6.
then, the first question is :
Q1: What is the difference among 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' ? I have already include site 'chen_rong' into my trusted stes! why the cookie was blocked by IE6. I have already tried firefox and google browser, both of them were ok for 'chen_rong', no cookie blocked from site 'chen_rong'!
and,
1. I have tried to use the script in attachment to test http authentication and also want to catch the cookie by utl_http .
2. please review the script for me.
3. I did:
SQL> exec show_url('http://localhost/apex/apex_admin/','ADMIN','Passw0rd');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm XDB for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
MS-Author-Via: DAV
DAV: 1,2,<http://www.oracle.com/xdb/webdav/props>
Server: Oracle XML DB/Oracle Database
WWW-Authenticate: Basic realm="XDB"
Date: Tue, 04 Aug 2009 02:25:15 GMT
Content-Type: text/html; charset=GBK
Content-Length: 147
======================================
PL/SQL procedure successfully completed
4. I also did :
SQL> exec show_url('http://localhost/apex/apex_admin/','ANONYMOUS','ANONYMOUS');
HTTP response status code: 500
HTTP response reason phrase: Internal Server Error
Check if the Web site is up.
PL/SQL procedure successfully completed
SQL> exec show_url('http://localhost/apex/apex_admin/','SYSTEM','apexsite');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm APEX for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
Content-Type: text/html
Content-Length: 147
WWW-Authenticate: Basic realm="APEX"
======================================
PL/SQL procedure successfully completed
my second questions is :
Q2: After I entered into realm 'XDB', I still need went into realm'APEX'. how could I change the script show_url to accomplish these two tasks and successfully get the cookie from site.
the show_url script is as following:
CREATE OR REPLACE PROCEDURE show_url
(url IN VARCHAR2,
username IN VARCHAR2 DEFAULT NULL,
password IN VARCHAR2 DEFAULT NULL)
AS
req UTL_HTTP.REQ;
resp UTL_HTTP.RESP;
name VARCHAR2(256);
value VARCHAR2(1024);
data VARCHAR2(255);
my_scheme VARCHAR2(256);
my_realm VARCHAR2(256);
my_proxy BOOLEAN;
cookies UTL_HTTP.COOKIE_TABLE;
secure VARCHAR2(1);
BEGIN
-- When going through a firewall, pass requests through this host.
-- Specify sites inside the firewall that don't need the proxy host.
-- UTL_HTTP.SET_PROXY('proxy.example.com', 'corp.example.com');
-- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
-- rather than just returning the text of the error page.
UTL_HTTP.SET_RESPONSE_ERROR_CHECK(FALSE);
-- Begin retrieving this Web page.
req := UTL_HTTP.BEGIN_REQUEST(url);
-- Identify yourself.
-- Some sites serve special pages for particular browsers.
UTL_HTTP.SET_HEADER(req, 'User-Agent', 'Mozilla/4.0');
-- Specify user ID and password for pages that require them.
IF (username IS NOT NULL) THEN
UTL_HTTP.SET_AUTHENTICATION(req, username, password, 'Basic', false);
END IF;
-- Start receiving the HTML text.
resp := UTL_HTTP.GET_RESPONSE(req);
-- Show status codes and reason phrase of response.
DBMS_OUTPUT.PUT_LINE('HTTP response status code: ' || resp.status_code);
DBMS_OUTPUT.PUT_LINE
('HTTP response reason phrase: ' || resp.reason_phrase);
-- Look for client-side error and report it.
IF (resp.status_code >= 400) AND (resp.status_code <= 499) THEN
-- Detect whether page is password protected
-- and you didn't supply the right authorization.
IF (resp.status_code = UTL_HTTP.HTTP_UNAUTHORIZED) THEN
UTL_HTTP.GET_AUTHENTICATION(resp, my_scheme, my_realm, my_proxy);
IF (my_proxy) THEN
DBMS_OUTPUT.PUT_LINE('Web proxy server is protected.');
DBMS_OUTPUT.PUT('Please supply the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the proxy server.');
ELSE
DBMS_OUTPUT.PUT_LINE('Please supplied the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the Web page.');
DBMS_OUTPUT.PUT_LINE('Web page ' || url || ' is protected.');
END IF;
ELSE
DBMS_OUTPUT.PUT_LINE('Check the URL.');
END IF;
-- UTL_HTTP.END_RESPONSE(resp);
-- RETURN;
-- Look for server-side error and report it.
ELSIF (resp.status_code >= 500) AND (resp.status_code <= 599) THEN
DBMS_OUTPUT.PUT_LINE('Check if the Web site is up.');
UTL_HTTP.END_RESPONSE(resp);
RETURN;
END IF;
-- HTTP header lines contain information about cookies, character sets,
-- and other data that client and server can use to customize each
-- session.
FOR i IN 1..UTL_HTTP.GET_HEADER_COUNT(resp) LOOP
UTL_HTTP.GET_HEADER(resp, i, name, value);
DBMS_OUTPUT.PUT_LINE(name || ': ' || value);
END LOOP;
-- Read lines until none are left and an exception is raised.
--LOOP
-- UTL_HTTP.READ_LINE(resp, value);
-- DBMS_OUTPUT.PUT_LINE(value);
--END LOOP;
UTL_HTTP.GET_COOKIES(cookies);
dbms_output.put_line('======================================');
FOR i in 1..cookies.count LOOP
IF (cookies(i).secure) THEN
secure := 'Y';
ELSE
secure := 'N';
END IF;
-- INSERT INTO my_cookies
-- VALUES (my_session_id, cookies(i).name, cookies(i).value,
-- cookies(i).domain,
-- cookies(i).expire, cookies(i).path, secure, cookies(i).version);
dbms_output.put_line('site:'||url);
dbms_output.put_line('cookies:');
dbms_output.put_line('name:'||cookies(i).name);
dbms_output.put_line('value:'||cookies(i).value);
dbms_output.put_line('domain:'||cookies(i).domain);
dbms_output.put_line('expire:'||cookies(i).expire);
dbms_output.put_line('path:'||cookies(i).path);
dbms_output.put_line('secure:'||secure);
dbms_output.put_line('version:'||cookies(i).version);
END LOOP;
UTL_HTTP.END_RESPONSE(resp);
EXCEPTION
WHEN UTL_HTTP.END_OF_BODY THEN
UTL_HTTP.END_RESPONSE(resp);
END;
/

I use oracle database enterprise edtion 10.2.0.3. I have already figured out the epg on 10.2.0.3 to support apex 3.2.
And as I described above, the apex site works fine for ip address , and localhost. but the cookie will be blocked by IE6, if I want to access the site by 'http://computername:port/apex/apex_admin'. This problem does not occured in firefox and google browser. Could someone give me answer?

Questions about multiple nodes and licenses

Similar Messages

Maybe you are looking for