Questions about my MSI R5770 Hawk Radeon HD 5770 and my Dell Studio 7100

Ok, I have had this card installed for about a year now. From the beginning Catalyst Control Center had given me error messages, "Catalyst Control Centre: Host application has stopped working. Windows is checking for solutions" every time I start the machine or every time I try to use the Catalyst Control Center. This has not been a problem because I have been using a 2 monitor system using the DVI port from on and the HDMI to Display Port adapter to the second larger monitor (if I went straight HDMI I can't change the settings and I end up with a 1 inch black border around the desktop and the outer edge of the 23" monitor,) so I just worked around with the HDMI to DVI. Well now I am trying to hook up three monitors. One to the Display port through a Displayport to DVI, one to the HDMI through the HDMI to DVI and one to the Display port. No matter what I try to do through the Windows display control panel, I can not get the displayport monitor (which ever is hook to that port) to display. Windows 7 does detect all three monitors, but it will not allow me to "extend the desktop" to the third monitor and I still can't get the Catalyst Control Center to work.
I have uninstalled all files from ATI or AMD that involve the video and reinstalled the latest drivers and software, but the Catalyst Control center still is not running.
If you could help me with this it would be great. I am a graphics designer and web designer/developer and not a hardware or software tech and I have been googling and trying different possible answers since yesterday morning.
My graphics card is
MSI R5770 Hawk Radeon HD 5770
My computer is
Dell Studio XPS 7100, AMD Athlon IIX4 630 Processor 2.80 GHz
8 gb
64-bit operating system
I am attempting to hook up a LG W2361 to the HDMI through HDMI to DVI adapter (presently working) at 1920 x 1080
an LG W1952 (at 1440 x 900) through the DVI port to DVI (presently working) and
an old Samsung SyncMaster 170t to the Displayport through a the adapter (not working) monitor is detected but it will not allow the extend desktop to be applied.
Hope someone can help, thanks in advance for just reading all of this.

Just incase anyone runs into a similar problem. I figured it out.
Somehow in one of either the ATI driver updates or in a Microsoft update, my drivers and software was contaminated. I deleted all software and drivers for the card, which I had already tried several times. But this time I went into safe mode used CCcleaner in safe mode and cleared the register of all entries. I then reloaded and the Catalyst Control center and it works fine now.
The problem with the three monitors seems to be that the one hooked to the displayport, if you are using more than 2 monitors, must be hooked to an active displayport adapter. I was using a passive adapter. So either I need to buy a very expensive adapter or.....maybe a new monitor that uses displayport.
Hopefully this will help someone else having this issue.

Similar Messages

Installed MSI R5770 Hawk but PC says: HD 3200

Hello to all. I just purchased and installed A MSI R5770 HAWK video card. I installed all the software and everything looks good, but after I finnished the install through the ATI Catalyst manager, I clicked on "View log" and it said: Hardware info= ATI Radeon HD 3200 Graphics
Did I do something wrong? I believe that the HD3200 is the on-board graphics(maybe). What should I do to get the most out of this GPU?? I do have monitor hooked up threw the HDMI on the card and I have good pic., I just thought that the Hardware should say: "ATI HD5770 " shouldn't it?
By the way I did search the forms before I posted, just in case you notice that this is my first post. Many Thanks, >>>>RiZ<<<<<

Yes, the HD3200 is integrated and not related to MSI R5770 HAWK
So the 5770 is not detected by the system or?
Have you checked in device manager? Is it listed there?
Check with also with AIDA64 At Display, GPU page:
http://www.aida64.com:8081/aida64extreme150.exe
Read >>Posting Guide<<

Hi Everyone Im New, Got Question About Upgrading MSI GT60 0ND With SSD

Hi Everyone I'm New, Got Question About Upgrading MSI GT60 0ND With SSD.
:welcome:So As I've stated I'm new here, or at least got a new MSI notebook.
Ive got the new MSI gt60 0ND with 750GB HD and 675 Ge-Force GTX , anyways to the bottom line.
I would like to Upgrade my computer with SSD that I bought and install the win8 on it, in order to speed things up, but I have encountered a few problems..
1. there is no sticker on the back of the computer that gives information about the serial number of my windows 8...
2. lets say in some magical way I could get the serial number out, can I use it to reinstall ? because Ive heard that you cannot use this CD key anyways unless you got a special win8 installation CD key from MSI because its MSI branded windows 8.
am I screwed ? ?? ? I thought it is possible to upgrade with SSD but it seems like MSI made it very hard, I do not understand why they even putted the warranty void sticker on the expansion bay's .... WEIRD..
Please help !! Thanks in advance,
David

Quote from: dudiz10 on 10-January-13, 19:20:54
Hi Everyone I'm New, Got Question About Upgrading MSI GT60 0ND With SSD.
:welcome:So As I've stated I'm new here, or at least got a new MSI notebook.
Ive got the new MSI gt60 0ND with 750GB HD and 675 Ge-Force GTX , anyways to the bottom line.
I would like to Upgrade my computer with SSD that I bought and install the win8 on it, in order to speed things up, but I have encountered a few problems..
1. there is no sticker on the back of the computer that gives information about the serial number of my windows 8...
2. lets say in some magical way I could get the serial number out, can I use it to reinstall ? because Ive heard that you cannot use this CD key anyways unless you got a special win8 installation CD key from MSI because its MSI branded windows 8.
am I screwed ? ?? ? I thought it is possible to upgrade with SSD but it seems like MSI made it very hard, I do not understand why they even putted the warranty void sticker on the expansion bay's .... WEIRD..
Please help !! Thanks in advance,
David
I think serial key of windows is in your bios which you cannot See however it should be automatically activates windows

MSI R5770 Hawk is out and Here it is!!!

Guess what has dropped by on my doorstep. A HAWK series 5770 video card. With the successful high-end LIGHTNING series that MSI offered before, they now produced this mainstream product line.
This video card is custom build with MSI’s Military Class Components, Twin Frozr II cooler , MSI’s own custom PCB Design with Voltage checkpoints for GPU and memory.
As you flip up the box front cover. You will see a short descriptions of the R5770 Hawk’s features and the actual item below.
The bundle includes: VGA to DVI adapter, Afterburner and VC Driver CD, Crossfire cable, 6pin to 4pin molex converter, manuals and the voltage checkpoints connector
See the rear, crossfire & PCIE slot covers?
Below is my system configuration:
•   Processor: Intel i7 920 @ 4.0ghz (C0 Stepping)
•   Motherboard: MSI X58 Pro Motherboard
•   Mems: 3x2GB Kingston DDR3 1333mhz
•   Harddisk: WD Raptor
•   PSU: AcBel M8 670watts
•   OS & Tools: Windows 7 32bit, ATI Catalyst 9.12, MSI Afterburner 1.50, CPU-Z, GPU-Z & 3dMark06
Below was the result of all stock settings
Lastly for an overclocked Processor & Video Card

Official site http://www.futuremark.com:80/community/competitions/msilightning/

Questions about Tour Updates? goes to Blank Screen and resets ???

I have a question about my Blackberry tour Updating...
I seem to notice my blackberry goes to a blank screen and a clock icon appears in the middle and goes around and around for about 10 minutes, what is this

I'm having the same problem, except it's been half an hour and the da*& thing won't start up. This is BAD.

SOS HELP!! MSI 7850 hawk 1Gb ORIGIN ROM AND UEFI ROM

Hi boss,i have a card MSI 7850 hawk 1Gb,but when i flash the rom you give to this man in post"forum-en.msi.com/index.php?topic=167409.0",my screen go to black ,it seems i flash the wrong rom and the wrost is i didn' backup the old rom, i checked and find out my card need 1C1.rom,not 1E1.rom,could you please send me a copy of 1C1 origin ROM and UEFI rom please? Or my vediocard was going to broken. THANKS A LOT :(

Quote from: candymanye on 06-February-14, 03:32:17
Yes i have VGA and can flash it back,all i need is an oringin ROM
MY card S/N is 602-V273-20SC1307012945-366
NAME IS:R7850 HAWK 1G
PLEASE HELP ME IN HURRY I CANT FALL IN SLEEP :(
Good news,i have flashed a rom related by a post "https://www.dropbox.com/s/i53tzcobzmjh5k4/001.rom" and it works,it's the same bios i need ,now my card live again,but where can i find the UEFI ROM of my card?

Question about my msi r6770 with 3 port the (HDMI,DVI,D-Sub)?

i bought my videocard msi r6770 with only the D-sub connector in the package in the box..
my vcard has 3 ports the HDMI, DVI, D-Sub
what is the diference betwen the 3?
so can i use the other cable the DVI and HDMI?
what is the diference if i use D-sub and Dvi, or HDMI advantage and disadvantage?
my monitor is SA300 with port DVI and D-Sub..

I actually just answered my own question right before I saw your reply. But thank you for confirming what I thought. That makes a lot of sense. I already have my existing DVD player set up with the component video cable and you are correct about needing an audio cable. I learned that through a process of elimination when I was setting that up and I have plenty of extra audio cables in my closet, so we're definitely on the same wavelength. My existing DVD player doesn't have the HDMI capability but the component video cable is fine. Now I just have a better understanding of how this works. I believe that my existing DVD player is analog but it's very good and I will glady keep it until it goes.
I was also just fooling with my TV settings. On my "source" list, I had had TV selected as source but I switched it to HDMI, which is what I already connected to my HDTV --- what a difference in sound and picture quality.

A question about using MSI GeForce4 4600Ti in WindowsXP system

meet a problem of G4 4600 Ti Graphics Accelerator. I can't install its driver in my computer.
The mainboard of my computer is MSI 845 Pro2 (W6528MS V1.2 102401). Operation system: windows XP. BIOS V6.00 PG
To install the driver of Graphic Accelerator, I also download the Intel INF Driver and install it. (issue date: 2002-11-8. Support intel based chipset motherboard. Driver Version: 4.20.1006(inf45) )
The Driver of Graphics Accelerator I have tested are: Nvidia driver 31.00 and Nvidai driver 30.00. The same problem met when install the driver. The error message is: An error occurred during installation of the device. The data is invalid.
Why this problem occur? could someone give me some advice on how to handle this. Thanks a lot

The data is invalid? Hmm.... maybe a corrupted download? I don't know.
Anyways, yes do listen to Deathstalker and try those Detonators from nVidia . Current version should be 41.09 dated back on Dec 3, 2002. You should be able to install that one. None of those unRARing crapsticks from MSI works on my computer for some reason. :D

Quick question about a msi fx5600

ive got the chance of getting a msi 256mb fx5600 for around £20. would it be worth buying to put in my system?
thanks.

20 quit is a very nice price 4 it
In this chart you can see how them 2 cards compare:
http://www.tomshardware.com/2003/12/29/vga_charts_iii/page13.html
It should make a difference worth more than 20 quit

Some questions about quality of displayed video, matching scaled object, and a funny issue occurs in my VI

Hi,
I am doing a pattern recognition project and come up with a VI (please find attached). There are something I am not sure and would like to ask:
1. The VI works, but in a funny way: most of the time I have to switch the "Create Template/Search for pattern" button twice in order to get the VI works fine (there were only a few times I just need to click the button once). What is the problem here and how to fix it?
2. I understand that IMAQ Match Pattern works with RGB images. So is there anyway I still can get RGB images pass through IMAQ Learn Pattern, IMAQ Match Pattern, whilst the 2 "Template" and resulting "Image" are still displayed in color mode.
3. Is there anyway I can still detect the object if scaling becomes an issue (as I need to move from far distance to approach the object)? To address this issue, do I need to use IMAQ Match Geometric Pattern, which I learn from somewhere in the forum that it took a lot more time to match my result comparing with IMAQ Match Pattern?
Thanks very much.
Solved!
Go to Solution.
Attachments:
pattern_recog.vi ‏128 KB

Sorry about silly question 2 (RGB <--> color). Actually, in my VI all the IMAQ Extract, IMAQ Pattern Match, etc.. can only work with Grayscale (U8) images. Whenever I switch the images to RGB (U32) there will be errors of Incompatible image type (error-1074396077). As I understand, IMAQ Extract and IMAQ Pattern Match should be able to work with RGB (U32) images. Am I right?
Attachments:
pattern_recog_test1.vi ‏128 KB

Questions about example "Dynamic JDBC Credentials for Model 1 and Model 2"

Hello,
i am trying to set up dynamic JDBC authentication in my ADF BC application - i want that it'll work like in Forms - a dababase user with the proper priveleges can log into my ADF BC application using his database login and password, and work with application.
I've read the paper "How To Support Dynamic JDBC Credentials" at
http://www.oracle.com/technology/products/jdev/howtos/10g/dynamicjdbchowto.html
and test the very useful example, created by Steve Muench, which i've got from
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#14
The example works, but when i'm transfer its realisation in my application - it doesnt work the right way. The problems is the following:
1. I can connect and work successfully only under the owner of the schema - the username and password of which i've wrote in the "jbo.server.internal_connection" string of the AM configuration.
2. When i'm connecting under other users, which have all the rights to work with the db objects, used by application, i got the main page with the "Access Denied" message - as i have no priveleges to the tables.
3. The big surprise is that if i am entering the fake username and password - the random letter combination - then i am getting the same behavior as in p.2 - the main page with the "Access Denied" message!
And the last question is:
4. Is it possible to set up the dynamic jdbc authentication using the build-in JDeveloper functions - i mean not to use that additional code, not override the ADF Binding Filter, and so on, but set up the similar behaviour (users log in using their db names and passwords) in several minutes following the standart documentation?
Thanks in advance!

One more question:
I have 2 independent Application Modules in my application - to make the 2 transactions independent one form another, when working with different parts of project - and while using dinamic JDBC authentification, the user connects only in the first AM under the username he's entered, but the 2nd AM works under the predefined earlier (during development) connection for that AM.
How can i make the 2nd AM to be connected under the logging in user (same as the 1rst AM)?

Question about upgrading ECC 6.0 to EHP 4 and NW 7.0 to EHP 1

Hi All,
I have read articles about installing Enhancement Packs. How ever I am a little confused.
We are currently on ECC 6.0 and NW2004s. For Portal also we are on Nw2004s (EP 7.0 SP 16)
We want to install EHP4 for our ECC system. Do we have to install EHP1 for our NW side? Does this mean we need to upgrade our portal also to EHP 1?
Also, do we need to update our ESS and MSS business packages also?
I have an OSS note open about a VC issue. They have recommended us to upgrade to SP 18. if we install EHP 1 on Portal, do we still need to upgrade to SP 18 or all previous SPs are included in EHP1?
I really appreciate your help on this. If you can refer me to some docs which give more detail on EHP 1 for NW, I will greatly appreciate it.
Thanks in Advance
Preet

Hai,
Check the below link.....
SAP Enhancement Package 1 for SAP NetWeaver 7.0
/docs/DOC-7741#section4 [original link is broken]
Regards,
Yoganand.V
Edited by: Yoganand Vedagiri on Feb 7, 2009 1:06 PM

HT4623 hello i have a question about update. do i must update or not and whether i do not do that will it harm my iphone? we have got iphone4 and iphone4s.

hello

Well crafted story = kudos, but try this User Tip FIRST
Some Solutions for Resetting Forgotten Security Questions
ÇÇÇ

Question about future of push email & syncing with Mac and PC on iPhone

I have two questions that I've tried to get answers from at two different Apple Stores, but I get many different answers - so I thought I'd give it a shot here.
1) I understand that push email is coming in the 2.0 software release this summer - but will that only be for Microsoft Exchange customers? My small business uses DreamHost (a private mail server company) that runs postfix under Debian Linux and supports Courier IMAP...our IT guy told me this, I'm not sure what it all means - he's a PC guy...
2) Can I sync my iPhone to my Entourage Mail & Contacts from my Mac AND sync my iTunes from my PC? Is this a bad idea?
THANKS!

What happens when you try to sign in with the new account on your phone? Any error message?

Question about Jco conenctions/Logical name of the model and metadata

Is it common to use the same logical name of the model and metadata across different enviroments?
For example, MODEL_DATA_DEST, META_DATA_DEST is used for DEV, QAS and PRD? Because i seem to have some trouble using code built in DEV to another environment if the logical name of the model and metadata is different.
Thanks in advance

Hi,
No for every environment the logical name of the model and metadata are different...
for eg: some logical names,
WD_RFC_METADATA_DEST
WD_MODELDATA_DEST
USERINFO_WD_RFC_METADATA_DEST
USERINFO_WD_MODELDATA_DEST
About JCo Details,
SAP JCo Functions,Architecture,Applications,Installation,Client & Server Programming :
http://help.sap.com/saphelp_nw70/helpdata/en/6f/1bd5c6a85b11d6b28500508b5d5211/frameset.htm
Creating Jco destination:
http://help.sap.com/saphelp_nw70/helpdata/en/3a/3b1b40fcdd8f5ce10000000a155106/frameset.htm
Maintaining Jco destination:
http://help.sap.com/saphelp_nw70/helpdata/en/94/3c1b40fcdd8f5ce10000000a155106/frameset.htm
The SAP JCo Repository :
http://help.sap.com/saphelp_nw70/helpdata/en/01/43e13d82fcfb34e10000000a114084/frameset.htm
Dynamic Jco creation Blogs:
/people/anilkumar.vippagunta2/blog/2007/02/06/dynamic-jco-creation
/people/gregor.wolf3/blog/2004/09/23/from-function-module-to-jco-application--part-1-of-3

Questions about my MSI R5770 Hawk Radeon HD 5770 and my Dell Studio 7100

Similar Messages

Maybe you are looking for