Questions about the Galaxy Tab on Verizon

Hello
Samsung is saying that the Galaxy Tab is comming to Verizonwireless soon. Rumors are sometime in November. I'm really excited about this product but I'm a little in the dark on some of the features and capabilties Verizonwireless will have for the Tablet when it is introduced.
Q1. Will I be able to use my Verizon cell phone number with the tablet to make and receive phone calls? If Verizon configures it for cell phone serivce, this device will be an iPad killer. Rumor has it that it is being offered in the UK with cell phoine service.
Q2. Will it be introduced on Verizons 4G network? May as well start off on the right foot. Again, this will be hugely popular with Verizon customers if it is.
Q3. When? My contract is up in December and I am looking for a device like this. When does Verizon plan to release the Galaxy Tab?
Thanks
JayT

We don't have any information on this device at this time. Keep in mind you can sign up to receive exclusive online offers, promotions and the latest information on products and services. Click here https://email.vzwshop.com/servlet/formlink/f?NFOQU&SOURCEID=WEB_DGF_VZW_SUPPORTNAV

Similar Messages

Question about the Zone Tabs.

＜Current Situation＞
I use the Zone Tabs Web Part in SharePoint 2010.
I am considerring about migration from SharePoint 2010 to Sharepoint 2013(Sharepoint 2010 experience).
I would like to evaluate whether the Zone Tabs is available in Sharepoint 2013(Sharepoint 2010 experience).
＜Questions＞
#1. I found a article about the Zone Tabs. And there was source codes in MSDN Code Gallery.
Please check below URL.
URL：http://blogs.msdn.com/b/bobgerman/archive/2008/02/19/back-in-the-zone-with-zonetabs.aspx
For the above reasons. My understanding is the Zone Tabs is free Web Part.
Is it correct or not?
#2. Could you tell me URL that possible to dowmload the Zone Tabs Web Part in Sharepoint 2013(Sharepoint 2010 experience).
I look forward to hearing from you.

Thank you for your reply!
I would like to ask a question.
#1. "SharePoint 2010/2013 Tabbed Web Part Zone" is same web part as below.
URL:http://sharepoint-applications.com/wp-content/themes/thesis/custom/pdf/zonetabsreadme.pdf
I look forward to hearing from you.

Simple question about the Monitor tab in OVM Manager

What are the quantities of the y axis? Memory appears to be MB, but is CPU percent, or load? And what is disk utilization?
thanks,
Peter

Peter Collins wrote:
What are the quantities of the y axis? Memory appears to be MB, but is CPU percent, or load? And what is disk utilization?CPU is load. Not sure what disk utilization is, sorry! I've sent this thread to the Oracle VM dev-list so hopefully someone can tell us. :)

I noticed yesterday my Iphone 4s does not say verizon at the top anymore. I tried calling *228 and did both options mutiple times and it hasnt changed. Also when i go to settings general about the network tab says unavailable. how can i fix this

I noticed yesterday my Iphone 4s does not say verizon at the top anymore. I tried calling *228 and did both options mutiple times and it hasnt changed. Also when i go to settings>general>about the network tab says unavailable. how can i fix this

Can you make and receive calls and texts? If you can, I wouldn't worry about it. If you can't, you may need to call Verizon. However, try this first. The 4S has a Vodafone SIM card in it for foreign travel. Try taking the SIM out and doing the *228 again. Once it activates properly, you should be able to put the SIM back for safe keeping. It's not used in the U.S.

I got an answer and I replied with a question about the answer, does no show in unanswered

I got an answer and I replied with a question about the answer, does no show in unanswered questions. I guess replying was not the way to get another anwer, How do I do that?
He said - Certain Firefox problems can be solved by performing a Clean reinstall. This means you remove Firefox program files and then reinstall Firefox.
I want to know - Will I still have my bookmarks, history, addons, plugins, etc.? I do not know what plugins and such that I had. What about my pinned tabs and my tabs that where open.
More information - When I try to start Firefox I keep getting the message that I need to restart my computer in order to complete a previous update attempt. I had Sweetpacks on my PC and I do not know where it came from, it took over my home page in Internet Explorer and Ithink caused the issue with Firefox.
Should I do the clean install or try starting Firefox now.

Could you please stay in the thread where you posted the question and reply there instead of opening a new thread?
Locking this thread, so please continue here:
*[[/questions/968194]]
See also:
*[[/questions/968222]]
You won't lose bookmarks and other data in the Firefox profile folder as long as you do not remove personal data in case you uninstall Firefox.
See also:
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/kb/Backing+up+your+information
You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.<br />
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.

A few questions about the ka790gx and dka790gx

i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section. There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
"""Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
It's better than nothing, but only just."""

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Questions about the Apple Developer Enterprise Program

Hi there,
i got some questions about the Apple Developer Enterprise Program:
- is there a way a company can create their own "AppStore" with only the APPs the employees should use?
- when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
Thanks in advance for answers!

Google: MDM

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Two questions about the new iWeb

Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanks

Ah well... thanks for the quick answer
Message was edited by: Guðlogi

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off.

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.

Restore as new... if the problem still continues then there is a hardware issue.
If it stops after a restore as new, then the issue is with the backup the device is currently setup with.

Question about the DB adapter

Question about the DB adapter
ns2006.0.7
Question:
It seems that we can only have 1 db adapter, but in the adapter defiition we have to specify the database. If I want to communicate to several different databases on different platforms, Oracle / SQL I need to install a DB adapter for each database connection.
I can't figure out how to add a second DB adapter, does anyone know how?
Thank you
Daniel
Safeway Inc.

Hi
We're new at developing our own agents etc. We've leveraged the supplied DB agent and written the relevant adapter, however we're struggling with the transformation.
Could I be cheeky and ask if anyone would be willing to share a transformation they have written for the DB adapter? Unfortunately no-one in our team has had past XML experience, so we're trying to backwards engineer from examples.
Thanks, Meghan

Question about the ability of Genius Bar to help with outside software...

Hi I wasn't sure where to put this, but here's my question. I'm having a problem with the Sims 2 on my Macbook and I was wondering if I go to the Genius Bar will they be able to help me or are they strictly hands off when it's not a direct Apple product?
Also, I bought an external hard drive in the Apple Store but it's not an Apple branded product. If I'm having a problem with that, can I go to the Apple Store?

If it's a question about the installation, system requirements or compatibility with your MacBook, the Mac Genius can probably help. If you're having some kind of issue while using the Sims 2, you'll probably have to contact .
The same is true with the hard drive. If you need some help getting it connected or even formatted, they can probably help. However, if it's not powering up or you're losing files or some kind of operational issue with the hard drive after it's connected, they'll probably refer you to the manufacturer.
Usually Apple can't support other vendors' products. Someone here may be able to give you some more advice, since none of us work for Apple. There may be someone here who's already had the same issue with the Sims.
-Doug

Question about the programming of a legend

Hello everybody,
I have a question about the programming of a waveform's legend. I
already asked here in this forum about the legend programming (03)
months ago.
I went satisfied but I ve just noticed that this code
(See Code old_legend_test.llb with main.vi as main function) operates a
little different from my expectances.
Therefore I have a new question and I want to know if it
is possible by labview programming to plot and show, on a waveform
chart, a signal with activ plot superior to zero (0) without to be
obliged to plot and show a signal with activ plot equal to zero (0) or
inferior to the desired activ plot.
I give you an example
of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
and each signal corresponds respectively to a channel (Chan1, Chan2,
Chan3, Chan4). I want to control the legend (activ plot, plot name and
plot color) programmatically. Is it possible with labview to plot signal
1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
without to active the signal with the corresponding activ plot zero
(0)?
Let see the labview attached data
(new_legend_test.llb with main.vi as main function). When I try to
control the input selected values again I get them back but I don't
understand why they have no effect on the legend of my waveform chart.
Could somebody explain me what I m doing wrong or show me how to get a
correct legend with desired plots? Thank by advance for your assistance.
N.B.
The
both attached data are saved with labview 2009.
Sincerly,PrinceJack
Attachments:
old_legend_test.llb ‏65 KB
new_legend_test.llb ‏65 KB

Hi
princejack,
Thanks for
posting on National Instruments forum.
The behavior
you have is completely normal. You can control the number of row displayed in
the legend and this rows are linked to the data you send to your graph. Thus,
if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
which data you want to display in your graph using the property node (Active
plot and visible). But for the legend as you send 3 plots there is an array of
the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
this array but you cannot control the order in this array! So, to be able to
change this array you have to only send data you need to you graph. I'm not
sure my explanations are clear so I have implemented a simple example doing
that.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
GraphLegend.vi ‏85 KB

Questions about the Galaxy Tab on Verizon

Similar Messages

Maybe you are looking for