Questions about the Global Shipping Program

Unfortunately, no. "Import fees" are only charged if the seller is using the Global Shipping Program on eBay.com.If you read the fine print in the Buyer's User Agreement for GSP, there is this under paragraph 3: i. Exclusions. You alone are responsible for any customs duties, taxes, surcharges, fines, penalties, or other charges which may be imposed on you by customs or tax officials after a GSP Item has successfully cleared customs and been delivered to (or made available for pickup at) the delivery address specified by you. http://pages.ebay.com/shipping/globalshipping/buyer-tnc.html My interpretation of that, is that if there are any additional charges, the buyer is responsible for paying them, even though you were not informed about them in advance. Personally, I would not use the GSP, for this and other reasons. Your only alternative is not to purchase items that show Import Fees on the shipping and handling tab. Unfortunately, this is not a very good solution.

around_again_records wrote:
When you pay for the item through PayPal, you are authorizing 2 payment transactions. The first payment goes to the seller and consists of the item cost and the domestic shipping costs. The second payment goes to the global shipping provider and consists of the international shipping costs and any import charges.The above quote is from the Global Shipping Help file. My question is: If I were to make a purchase from someone using the GSP (and I won't but...) and I go to the shipping page to calculate my cost. Where do I put that the item is going to be shipped to? IF the first payment goes to the seller and consists of the item cost and the DOMESTIC shipping cost - then to find out the Domestic shipping cost do I enter the location of the Pitney Bowes Shipping depot????
How do I know what Pitney Bowes (or the Global Shipping Provider) is going to charge me for shipping? I absolutely need to know that before I make any purchases. From what I understand, I will find this all out during checkout. That's a little bit late for me. Same thing with duties and taxes. I need to know what they are going to charge BEFORE i get to the checkout. When parcels go through normal channels USPS/CP I know how much tax I might have to pay and I know how much the duty charge will be. I would never purchase anything without knowing these costs up front. Hi, Round-again. Hope you and Kalvin don't mind my leaping in here. I went through a test listing from a seller using the GSP some time ago, so I may have a bit of insight for you. GSP listings have shipping charges and estimated import charges right on them. Usually, those "estimated" charges are pretty accurate, but I think they have to be considered "estimated" for auction listings where the taxes due on the item are going to go up as the bid price rises. In the case of my test listing, the shipping charge and import charges were just as were mentioned on the listing page and it was a simple matter of going through checkout, agreeing to the terms and conditions of the Global Shipping Program, and almost making my payment. The wrinkle is that since everything but the kitchen sink is thrown into the import charges and they're not itemized, you can't be 100% sure how much is going to taxes, how much to duty (which often isn't applicable anyway), and how much to the Global Shipping Program as an administrative fee. However, you can calculate the taxes yourself using the tax rate(s) applicable to your province if you need to get an idea of how much is going to whom. This likely isn't a perfect solution for you if you're trying to claim back any taxes (and duties, if applicable) paid on the item, but it's probably the best we can do right now with how the GSP is set up.

Similar Messages

Questions about the Buy Back Program

If I purchased a phone today that costed $600 but $200 with new 2 year contract activation, would the Buy Back program money back percentages come from the $600 or $200?
Also in about 6 months if I decided to return the phone for another that costed (imaginary prices) $700 but $300 with a new 2 year contract, would the money I got back from the first phone go towards the new contract price ($300) or would I have to pay for the phone in full ($700)?
Thanks in advance.

Crystallee,
Thank you for your kind replies to my question, but I'm still not getting it.
Please let me give a specific scenario that could happen with my situation.
I bought the Nexus s unlocked for full retail of $529.99 from my local retail Best Buy about 3 weeks ago. I also purchased the "Buy Back" program with it.
I then walked next door to the T-Mobile store with phone in hand and opened a non-contract "Even More Plus" month to month plan.
At that time my current line contract with AT&T had expired, so I had no early termination fee when I cancelled service to start with T-Mobile.
Now, If I decide to purchase a new phone four or five months down the road, my understanding from the sales associate at BB, is that I would give over my nexus to BB in exchange for a BB Gift card in the amount of 50% of what I paid originally, $529.99 for the Nexus s.
I could then proceed to open a new line of service with another carrier that BB sells, i.e. Sprint or Verizon and would only be liable for the new contract price for that new phone, and I would be able to use the Gift card from the nexus turn-in (Buy Back) to pay for the new phone on a new 2yr. contract.
That was the understanding I had from the BB sales associate, who I think was a lower level manager.
Let me know if I have misunderstood the "Buy Back" process as I've described it here.
Thank you again for your patience. My son would understand all of this. I'm getting too old! (lol)

Global shipping program scam

The global shipping program is a complete scam. Used items do NOT hold the same value as brand new items with TAGS! I've seen completely used up shoes with a value of $10 and an import charge of $200. You guys need to look into this because in Canada used goods DO NOT have import charges and if the value is ridiculously high the import charge is well under $30

Take a deep breath. The poorly thought out and deeply flawed Global Shipping Program was not set up to help buyers in any way.It's intention was to encourage US (and now UK) sellers to offer their items internationally. This was done by guaranteeing sellers that if they got their shipment safely to the GSP plant in Kentucky for transhipment out of the USA (all around the world, not just Canada), the seller would not be held responsible for slow delivery, 'lost' parcels, or complaints about foreign duties and taxes. Now.If your seller gave the value of those used shoes as $10, there would be NO duty or sales tax and the GSP/Pitney Bowes would not be collecting their $5 service charge. The minimum for assessment of charges is $20CDN (about $16 USD).If the seller, for some dimwitted reason, gave the value as $100-- instead of the selling price-- that is not the fault of the GSP. There is no duty on used goods, but there is sales tax. Even so sales tax on a $100 value would be between $5 and $17 depending on the province. What is the number of the listing in question? I've seen completely used up shoesUmm. You may be thinking these would be purchased at a low price by people who plan to wear them. While such innocence is refreshing, you have overlooked the fetish market. If you value your purity, do NOT look up 'used socks' on dotCOM under 'Mature'. Just don't.

Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

Hello my company Favorites I would like to first thank you for this wonderful program I have a question about the program. How can I Arabization program In your response to the spread accept me thanks and respect

Hi ,
You might want to refer the following link to find your serial number and activate your software .
Here is the link for the same.
https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Let us know how it goes .We'll do the best possible to get your issue fixed.
Regards
Sukrit Dhingra

Questions about the Apple Developer Enterprise Program

Hi there,
i got some questions about the Apple Developer Enterprise Program:
- is there a way a company can create their own "AppStore" with only the APPs the employees should use?
- when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
Thanks in advance for answers!

Google: MDM

Question about the programming of a legend

Hello everybody,
I have a question about the programming of a waveform's legend. I
already asked here in this forum about the legend programming (03)
months ago.
I went satisfied but I ve just noticed that this code
(See Code old_legend_test.llb with main.vi as main function) operates a
little different from my expectances.
Therefore I have a new question and I want to know if it
is possible by labview programming to plot and show, on a waveform
chart, a signal with activ plot superior to zero (0) without to be
obliged to plot and show a signal with activ plot equal to zero (0) or
inferior to the desired activ plot.
I give you an example
of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
and each signal corresponds respectively to a channel (Chan1, Chan2,
Chan3, Chan4). I want to control the legend (activ plot, plot name and
plot color) programmatically. Is it possible with labview to plot signal
1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
without to active the signal with the corresponding activ plot zero
(0)?
Let see the labview attached data
(new_legend_test.llb with main.vi as main function). When I try to
control the input selected values again I get them back but I don't
understand why they have no effect on the legend of my waveform chart.
Could somebody explain me what I m doing wrong or show me how to get a
correct legend with desired plots? Thank by advance for your assistance.
N.B.
The
both attached data are saved with labview 2009.
Sincerly,PrinceJack
Attachments:
old_legend_test.llb ‏65 KB
new_legend_test.llb ‏65 KB

Hi
princejack,
Thanks for
posting on National Instruments forum.
The behavior
you have is completely normal. You can control the number of row displayed in
the legend and this rows are linked to the data you send to your graph. Thus,
if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
which data you want to display in your graph using the property node (Active
plot and visible). But for the legend as you send 3 plots there is an array of
the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
this array but you cannot control the order in this array! So, to be able to
change this array you have to only send data you need to you graph. I'm not
sure my explanations are clear so I have implemented a simple example doing
that.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
GraphLegend.vi ‏85 KB

Dear Customer Service Team, I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I

Dear Customer Service Team,
I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I can not find it and now I only have access to the trial version.
Thank you for your help in advance.
Kind Regards,
G. Zsolt

There is no serial number require for Creative Cloud products, you may activate the products using your email address and password which is associated with Adobe. If your Dreamweaver asking for serial number, then make sure you are signing in with correct email address.
You may also refer below link
Sign in, activation, or connection errors | CS5.5 and later

The question about the sharepoint server 2010 install

Hi Friends,
i have a question about the sharepoint server 2010 install.
my computer is used the windows server 2008 service pack 1. in order to install the sharepoint 2010 server, i need to choose to windows server 2008 service pack 2. my question is when i install the windows server 2008 service pack 2,whether the inside
of my computer information will be lost or change?
thank you in advance.
Qearl

Hi ,
No data will be lost either from your Windows program files or other drives as long as it is an upgrade.
After upgrade you will still be able to see your old program files under windows.ol folder in the C: Drive of the new OS.
The data will be lost only when you perform a clean install like complete formatting the HArd disk and installing from scratch.
As mentioned it always good to maintain a backup preferable important files in a skydrive as there is a good chance of external drives crashing.

N00b question about the ABS

Hey, I am new to Arch and I'm about to install it on my machine (used it a bit in a virtual machine) and I have a small nooby question about the ABS.
According to the wiki: https://wiki.archlinux.org/index.php/Arch_Build_System
"Running abs as root creates the ABS tree by synchronizing with the Arch Linux server."
Does this mean that the ABS tree (not the package) is always downloaded from the official Arch Linux servers, never from any of the mirrors?

jomasti wrote:
ANOKNUSA wrote:makepkg is part of the abs package.
You might be confusing that with makeworld. makepkg is included with pacman.
Anyway, gregor, you are confusing the AUR with ABS. Although, what you are saying is still possible via the source files when looking up a package on https://www.archlinux.org/packages/. But with both, using a program or using the respective page is a personal choice.
Yup, you're right. My mistake.

Question about the MAKZN field in the RBKP table

Hello all.
I have a question about the MAKZN field. Does anyone know what field in MIRO is assigned to this field? We have an issue where a line item amount was not selected invoice was out of balance but the agent selected accept and post. And invoice posted. but I am interested in knowing where the amount if keyed in because when I go to the RBKP table I see an amount entered in the MAKZN (manually accept net difference amount)

Hi,
it seems as if the value was calculated internally:
program SAPLMR1M
dynpro 6000
PAI module fcode_6000
Include LMR1MI3W
*-------- buchen ------------------------------------------------------*
    WHEN fcobu OR fcomanak.
*--- identical code in PAI Module FCODE_6250 --------------------------*
      PERFORM ota_check USING vf_kred-xcpdk rbkpv-xcpdd
                        CHANGING rc.
      IF rc NE 0.
        CLEAR ok-code.
        EXIT.
      ENDIF.
      IF ok-code = fcomanak.
        PERFORM diff_akzeptieren.
        ok-code = fcobu.
      ENDIF.
where:
fcomanak          LIKE ok-code VALUE 'MANAK', " Manuell akzeptiert
*&      Form DIFF_AKZEPTIEREN
*       Differenz manuell akzeptieren
FORM diff_akzeptieren.
*       Manuell akzeptierter Betrag
    rbkpv-makzn = rbkpv-makzn + rbkpv-diffn.
    rbkpv-makzmw = rbkpv-makzmw + rbkpv-diffmw.
*       Differenzbeträge
    CLEAR: rbkpv-diffn, rbkpv-diffmw.
ENDFORM.                             " DIFF_AKZEPTIEREN
maybe it´s happenning when releasing manually the invoice in MRBR?
Best regards.

I got an answer and I replied with a question about the answer, does no show in unanswered

I got an answer and I replied with a question about the answer, does no show in unanswered questions. I guess replying was not the way to get another anwer, How do I do that?
He said - Certain Firefox problems can be solved by performing a Clean reinstall. This means you remove Firefox program files and then reinstall Firefox.
I want to know - Will I still have my bookmarks, history, addons, plugins, etc.? I do not know what plugins and such that I had. What about my pinned tabs and my tabs that where open.
More information - When I try to start Firefox I keep getting the message that I need to restart my computer in order to complete a previous update attempt. I had Sweetpacks on my PC and I do not know where it came from, it took over my home page in Internet Explorer and Ithink caused the issue with Firefox.
Should I do the clean install or try starting Firefox now.

Could you please stay in the thread where you posted the question and reply there instead of opening a new thread?
Locking this thread, so please continue here:
*[[/questions/968194]]
See also:
*[[/questions/968222]]
You won't lose bookmarks and other data in the Firefox profile folder as long as you do not remove personal data in case you uninstall Firefox.
See also:
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/kb/Backing+up+your+information
You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.<br />
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.

4 questions about the the top boxes - SD box and Home media DVR

Hello. I am going to be getting Fios soon and I have some questions about the boxes. I will be getting the Home Media DVR and 4 SD boxes.
1) Do these boxes have timers on them to set so the box can turn off at a certain time?
2) Do these boxes have parental control and if so is it good enough to block things that I do not want my child to see?
3) How many people can access the home media dvr at the same time to watch already recorded programs
4) If the Home Media DVR is in the family room can a record be started from the bedroom over the SD set top box (even an hd show)?
Thanks for any help.

I have been using two Standard Set Top Boxes for about a year. I have Parental Controls on and all channels locked. When I want to watch a channel, I tune to that channel, note the LOCKED message, which tells me to press the OK button to enter ther Parental Controls PIN and unlock the channel for viewing.
This has worked flawlessliy for the last year -- ON THE Standard STB's.
I just ordered the Home Media DVR STB to replace one of my Standardt STB..
On the Home Media DVR:
I can set the Parentals Control PIN and lock the channels, in the exact same way I did o nthe Standard STB's. However, when tuen to ANY channel, I still ge the LOCKED message and instructions to press OK to unlock the channel -- BUT no matter how I press the OK button, the Enter your Parental Conlrols PIN dialog box willl NOT open. Nothing happens -- you CAN NOT view any channel.
Again, it is the EXACT setup as for the Standard STB, but the OK button will NOT unlock any of the channels.
If you unlock all channels and LOCK the Ratings, the same problem recurs: OK buitton will never open the "enter your PIN" dialog box.
I have received two replacement boxes and have spent hours on the phone with some very capable and helpful Techs -- no luck.
Has anyone else had the same problem? Here's how to test your Home Media DVR:
1. Menu-Settings-Parental Controls.
2. You will be prompted to CREATE youre Parental Controls PIN
3. Enter you PIN twice.
4. Use the > button to scroll to Enable On/Off and set it on.
5. scroll down to Control Channels
6. Press > button to See Locked Channels
7. Scroll down to Add/Remove Channels
8. Scroll right to choose LOCK ALL
9. Press OK and then scroll to YES to lock all channels
10. Press EXIT to get out of settings.
11. All channels are now locked.
12. Go to any channel
13. A black screen will appear with a lock silhouette with the word LOCKED below, followed by instructions to Press OK to enter PIN and unlock this channel. (plus how to change locks...).
14.Press the OK button and, if it is working, you will see a dialog box at the bottom of the screen that is titled: UNLOCK, with the channel listed and the instructions to "Enter your PIN using your numeric pad on remote to naje this channel availabe for all users." THere's a PIN box, which shows asterisks for each number entered, with "Press Exit to Cancel" below.
15. On the Standard STB, it works exactly as described in steps 1 thru 14. On the Media Center DVR, it works up to step `13, but in 14, no matter how you press the OK button, the UNLOCK dialog box never pops us. The Remote STB light flashes on the remove and the REMOTE yellow light flashes on the DVR, but nothng happens.
If you have a Home Media DVR, can you please try this and see if it works?
Thanks,
John

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Questions about the Global Shipping Program

Similar Messages

Maybe you are looking for