Questions about the license of ISE

Good morning. We are looking for the product to replace our freeradius servers, and we have the following questions for Cisco ISE:
1. We want to use one SSID for all clients, and use ISE to separate the different roles (student, employee, faculty, guest, eduroam, alumni, etc.) by reading the attributes from AD. Which kind of licenses are good for our situation (base, plus, advanced, or wireless). Please briefly explain the difference of these licenses.
2. Is the ISE base license a simultaneous license (for example, can 10,000 base license support 10,000 simultaneous wireless clients?). As we know the Aruba clearpass license is based on the number of unique authenticating endpoints (devices) per day (not simultaneous license). Does Cisco ISE license work the same way?
3. We also want to use the role based access control for wired connection later, shall we buy different license than the base or wireless license?
Thank you, and have a nice day.
Antony

Answer to 1 :
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_user_guide/ise_man_license.html#pgfId-1053140
Answer to 2 :
Same link, it does state which licenses are non stackable.
For 3,
You probably may want to obtain a wireless service but do note of your requirements.

Similar Messages

  • Question about the license of the Helvetica fonts that came preinstalled on my OS X Mountain Lion

    Hi, I'm a hobby illustrator and I currently work in Mac OS X Mountain Lion. Recently, I've decided that I'm going to switch to Linux Mint for various reasons including a more responsive and customizable system. However, I still want to use some of the fonts that came preinstalled with Mountain Lion, including the Helvetica, Helvetica CY, and Helvetica Neue font families.
    Now, as I understand it, the license for the fonts included with Mountain Lion cannot be transferred over if I export one of the fonts from the Font Book app and install it in Linux Mint. My questions are:
    1. Is this true, or does the license remain valid even if I copy the fonts to Linux Mint?
    2. If not, does the license remain valid if I somehow access OS X's fonts from within Linux Mint and use them without copying them over?
    Thanks,
    Emily

    Since this is absolutely NOT a forum associated with fonts from vendors other than Adobe, we cannot give you a definitive response to this.
    You should consult the EULA (End User License Agreement) for Apple's operating systems and see if they address the issue of the license for the bundled fonts. If there is nothing mentioned there, I suggest you contact Apple directly for their official response to your query.
    Generally speaking, I would be amazed if they tell you that once you have a license to any version of MacOS, you have rights to use the bundled fonts on any other platform for the indefinite future.
              - Dov

  • 3 questions about the evalution license ?

    Hi - I have some questions about the Weblogic Server Eval license.
    Before I start let me just say I'm not trying to rip BEA off, I just
    want to know what's possible.
    1. Firstly what happens after the 30 days does the server just not
    work or only work in a restricted form ? If restricted, how so ?
    2. I read that the eval edition will only access 3 unique IP
    addresses. I intend to have WL running on a RedHat linux box whilst
    the pages are served by IIS on a W2K box (both machines are on our
    internal LAN). Am I going to be able to do this with the eval license
    ? I'm not quite sure what the 3 IP addresses refer to ...
    3. Do I need anything super-strong in the way of a Linux box to run
    this on ? I've got an old Pentium with 32Mb of RAM in it. I can't see
    a "minimum spec" on the BEA site. Bear in mind it's not to do any
    "real" work just to give the thing a run around the block ?
    4. When the Eval license is dead what's the minimum amount a small s/w
    house would pay for a licence to develop under (US (or anywhere)
    prices will do I just want a ballpark).
    Sorry that was 4 questions ;-). I'd appreciate any information you
    have to share.
    Thanks
    Richard Shea.

    1)The server won't start if the license expires.
    2)The 3 unique IP'S refer to the number of clients that can access the
    server. It means that WLS will server requests coming from 3 different
    ip's at most. A request coming froma 4th client with a different ip will
    be rejected.
    3)I guess 32 MB's is relatively less The default scripts always use 64 MB
    exclusively for the JVM . Having 32mb RAM means that a part of it will be
    used by t he Operating System and other Applications. You might experience
    OutOfmemory errors and slow performance
    4)email [email protected] and they should be able to handle this
    Yeshwant
    Richard Shea wrote:
    Hi - I have some questions about the Weblogic Server Eval license.
    Before I start let me just say I'm not trying to rip BEA off, I just
    want to know what's possible.
    1. Firstly what happens after the 30 days does the server just not
    work or only work in a restricted form ? If restricted, how so ?
    2. I read that the eval edition will only access 3 unique IP
    addresses. I intend to have WL running on a RedHat linux box whilst
    the pages are served by IIS on a W2K box (both machines are on our
    internal LAN). Am I going to be able to do this with the eval license
    ? I'm not quite sure what the 3 IP addresses refer to ...
    3. Do I need anything super-strong in the way of a Linux box to run
    this on ? I've got an old Pentium with 32Mb of RAM in it. I can't see
    a "minimum spec" on the BEA site. Bear in mind it's not to do any
    "real" work just to give the thing a run around the block ?
    4. When the Eval license is dead what's the minimum amount a small s/w
    house would pay for a licence to develop under (US (or anywhere)
    prices will do I just want a ballpark).
    Sorry that was 4 questions ;-). I'd appreciate any information you
    have to share.
    Thanks
    Richard Shea.

  • Dear Customer Service Team,  I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I

    Dear Customer Service Team,
    I bought a twelve-month Dreamweaver CC program with monthly payment that I have paid via bank transfer and there would be a question about the activation. How could I get the license key with which I can activate my account? I can not find it and now I only have access to the trial version.
    Thank you for your help in advance.
    Kind Regards,
    G. Zsolt

    There is no serial number require for Creative Cloud products, you may activate the products using your email address and password which is associated with Adobe. If your Dreamweaver asking for serial number, then make sure you are signing in with correct email address.
    You may also refer below link
    Sign in, activation, or connection errors | CS5.5 and later

  • Questions about Feature Licenses for 1800, 2800, 3800, 2900, 3900 series ISRs

    Hey all,
    I have a question about feature licensing for Cisco ISR 1800, 2800, 3800, 2900 series. I know there are differences between all of the series. My main question which applies for all the Cisco ISR series is this:
    "If I want to upgrade the IOS to a newer version and upgrade from the basic feature set, do I need to get a license from Cisco? "
    If yes:
    And if so, how do I go about purchasing a license? Is a support contract needed?
    Again, I need to know for each Cisco ISR series. I'd appreciate any help on this. 
    Thanks,
    John

    You probably want to reach your SE/AM about this so they can explain you exactly how this works, maybe some sales material, or you can also reach pre-sales.

  • About the license...

    Hi,
    I´ve a doubt about the license/uses of JHeadstart. We´re being testing the evaluation version and it is quite impressive.
    However, we want to know if Is it legal to use it for the developing of a system for a client? (obviously, buying the proper number of licenses)
    Any comments?
    Best regards,
    Gerardo

    Gerardo,
    The evaluation version you are working with is (what's in a name) meant for evaluation purposes and not for development of commercial applications for clients. I suggest you read our FAQ ( http://www.oracle.com/technology/consulting/9iservices/files/JHS_FAQ_EXT1012.html ) to get answers to all your questions regarding the licences you need in your particular situation, and how to obtain then.
    Hope this helps,
    Peter Ebell
    JHeadstart Team

  • Re: Question about the Satellite P300-18Z

    Hello everyone,
    I have a couple of questions about the Satellite P300-18Z.
    What "video out" does this laptop have? (DVI, s-video or d-sub)
    Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
    What is the warranty on this laptop?

    Hello
    According the notebook specification Satellite P300-18Z has follow interfaces:
    DVI - No DVI port available
    HDMI - HDMI-out (HDMI out port available)
    Headphone Jack - External Headphone Jack (Stereo) available
    .link - iLink (Firewire) port available
    Line in Jack - No Line in Jack port available
    Line out Jack - No Line Out Jack available
    Microphone Jack - External Micrphone Jack
    TV-out - port available (S-Video port)
    VGA - VGA (External monitor port RGB port)
    Also you can connect it to your LCD TV using HDMI cable.
    Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

  • A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

    Hello everybody,
    SQL> SELECT * FROM v$version;
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE    11.2.0.1.0  Production
    TNS for Linux: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    SQL>
    OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
    Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
    So, here is how I proceed
    SET SERVEROUTPUT ON;  -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
    SET SQLBLANKLINES ON;
    VARIABLE mysid NUMBER
    VARIABLE myserial# NUMBER;
    VARIABLE saved_sql_id VARCHAR2(13);
    -- So first I store sid and serial# for the current session
    BEGIN
        SELECT sid, serial# INTO :mysid, :myserial#
        FROM v$session
        WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
    END;
    PL/SQL procedure successfully completed.
    -- Just check to see the result
    SQL> SELECT :mysid, :myserial# FROM DUAL;
        :MYSID :MYSERIAL#
           129   1067
    SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
    SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
    http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
    the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
    BEGIN
        SELECT prev_sql_id INTO :saved_sql_id
        FROM v$session
        WHERE sid = :mysid AND serial# = :myserial#;
    END;
    PL/SQL procedure successfully completed.
    SQL> SELECT :saved_sql_id FROM DUAL;
    :SAVED_SQL_ID
    9babjv8yq8ru3
    SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
    SELECT child_number, sql_id, sql_text
    FROM v$sql
    WHERE sql_id = :saved_sql_id;
    CHILD_NUMBER   SQL_ID          SQL_TEXT
    0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
    SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
    After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
    Problem with dbms_xplan.display_cursor
    This was precisely what I did
    SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
    and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
    are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
    Could anyone kindly make some clarification?
    thanks in advance,
    Regards,
    Dariyoosh

    >
    and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
    are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
    Hi Dariyoosh,
    SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
    Here below what Tom Kyte is explaining in this page:
    Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
    1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
    2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
    Al

  • Questions about the Apple Developer Enterprise Program

    Hi there,
    i got some questions about the Apple Developer Enterprise Program:
    - is there a way a company can create their own "AppStore" with only the APPs the employees should use?
    - when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
    Thanks in advance for answers!

    Google: MDM

  • Some questions about the integration between BIEE and EBS

    Hi, dear,
    I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
    could anyone give some guide for me? I'm very appreciated if you can also give any other information.
    Thanks in advance.

    1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
    2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
    3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
    4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
    Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
    and many more docs on google
    Hope this helps

  • Two questions about the new iWeb

    Hi
    I've got two questions about the new iWeb.
    1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
    2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
    thanks

    Ah well... thanks for the quick answer
    Message was edited by: Guðlogi

  • Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update.  EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off.

    Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.

    Restore as new... if the problem still continues then there is a hardware issue.
    If it stops after a restore as new, then the issue is with the backup the device is currently setup with.

  • Question about the DB adapter

    Question about the DB adapter
    ns2006.0.7
    Question:
    It seems that we can only have 1 db adapter, but in the adapter defiition we have to specify the database.  If I want to communicate to several different databases on different platforms, Oracle / SQL I need to install a DB adapter for each database connection. 
    I can't figure out how to add a second DB adapter, does anyone know how?
    Thank you
    Daniel
    Safeway Inc.

    Hi
    We're new at developing our own agents etc. We've leveraged the supplied DB agent and written the relevant adapter, however we're struggling with the transformation.
    Could I be cheeky and ask if anyone would be willing to share a transformation they have written for the DB adapter? Unfortunately no-one in our team has had past XML experience, so we're trying to backwards engineer from examples.
    Thanks, Meghan

  • Question about the ability of Genius Bar to help with outside software...

    Hi I wasn't sure where to put this, but here's my question. I'm having a problem with the Sims 2 on my Macbook and I was wondering if I go to the Genius Bar will they be able to help me or are they strictly hands off when it's not a direct Apple product?
    Also, I bought an external hard drive in the Apple Store but it's not an Apple branded product. If I'm having a problem with that, can I go to the Apple Store?

    If it's a question about the installation, system requirements or compatibility with your MacBook, the Mac Genius can probably help. If you're having some kind of issue while using the Sims 2, you'll probably have to contact .
    The same is true with the hard drive. If you need some help getting it connected or even formatted, they can probably help. However, if it's not powering up or you're losing files or some kind of operational issue with the hard drive after it's connected, they'll probably refer you to the manufacturer.
    Usually Apple can't support other vendors' products. Someone here may be able to give you some more advice, since none of us work for Apple. There may be someone here who's already had the same issue with the Sims.
    -Doug

  • Question about the programming of a legend

    Hello everybody,
    I have a question about the programming of a waveform's legend. I
    already asked here in this forum about the legend programming (03)
    months ago.
    I went satisfied but I ve just noticed that this code
    (See Code old_legend_test.llb with main.vi as main function) operates a
    little different from my expectances.
    Therefore I have a new question and I want to know if it
    is possible by labview programming to plot and show, on a waveform
    chart, a signal with activ plot superior to zero (0) without to be
    obliged to plot and show a signal with activ plot equal to zero (0) or
    inferior to the desired activ plot.
    I give you an example
    of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
    and each signal corresponds respectively to a channel (Chan1, Chan2,
    Chan3, Chan4). I want to control the legend (activ plot, plot name and
    plot color) programmatically. Is it possible with labview to plot signal
    1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
    without to active the signal with the corresponding activ plot zero
    (0)?
    Let see the labview attached data
    (new_legend_test.llb with main.vi as main function). When I try to
    control the input selected values again I get them back but I don't
    understand why they have no effect on the legend of my waveform chart.
    Could somebody explain me what I m doing wrong or show me how to get a
    correct legend with desired plots? Thank by advance for your assistance.
    N.B.
    The
    both attached data are saved with labview 2009.
    Sincerly,PrinceJack
    Attachments:
    old_legend_test.llb ‏65 KB
    new_legend_test.llb ‏65 KB

    Hi
    princejack,
    Thanks for
    posting on National Instruments forum.
    The behavior
    you have is completely normal. You can control the number of row displayed in
    the legend and this rows are linked to the data you send to your graph. Thus,
    if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
    which data you want to display in your graph using the property node (Active
    plot and visible). But for the legend as you send 3 plots there is an array of
    the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
    this array but you cannot control the order in this array! So, to be able to
    change this array you have to only send data you need to you graph. I'm not
    sure my explanations are clear so I have implemented a simple example doing
    that.
    Benjamin R.
    R&D Software Development Manager
    http://www.fluigent.com/
    Attachments:
    GraphLegend.vi ‏85 KB

Maybe you are looking for