Questions about VK34 (create condition record with reference)

Hi experts,
When clicking the botton "copy condition" via VK34, an error message pops up. It says the error is due to no definition of select rule. I use the standard condition record PR00.
Q1: How to define "select rule"?
Q2: Any chances to download condition record when using VK13 or VK33?

Hello Colleague.
This Unicode problem occurs mainly with pricing reports (recognized by report names that start with /1SDBF12L/RV14AK).
To regenerate these, call transaction V/LE or use transaction SE38 to execute the report RV14ALLE.
Leave the selection screen empty and execute (F8).
See SAP note 497850.
If you have further questions about the generation in the condition maintenance, I recommend to read Note 886771.
I hope it can help you.
Regards
Ruy Castro

Similar Messages

Create condition record with reference to existing condition record

how to create condition record with reference to existing condition record?

Hi,
See this link :
http://help.sap.com/saphelp_47x200/helpdata/en/de/7a8534c960a134e10000009b38f83b/frameset.htm
You can create with reference with Tcode : VK14 (or VK34)
Or in VK12, you can copy condition records with copy rules.
Regards,
Lionel

Create customer master record with reference

Hello guys,
I'm trying to create a customer master record with reference using XD01 (existing in the referent company code only) but no data are copied at the general level of the customer (not only the address data but also these contained in KNA1). Is there something I can do in order to get the referent data?
Thanks

Only data that does not refer directly to the customer/vendor is copied from the reference account to the new account, that is,no address information, and so on.

Create customer master record with reference to existing division

how to create customer master record with reference to existing division?

what type of reports sd consultant configure in implementation project?and in supporting project?

One question about pricing and condition in sd.

Dear all.I have created two material m001 and m002.In the sale order,if the customer buy 10 m001 and 5 m002, I want the price of the 5 m002 will have 60% discount.Some one tell me "you can use the BOM to realize it".But I don't know how to do or whether there are other way to realize it.Is there any one could give me some reference or advice in detail to resolve this problem?I will appreciate him/her very much.Thank you.

hi
Bonus buy is a functionality we use to give more than one material at a different rate than what we normally give them when they are sold together. Like if A is 15/- and B is 20/- when sold individually but when sold together, we can sell them at say 30/- which is at a reduced price.
Configuration follows the same condition technique where we create a condition table, an access sequence , a condition type, a pricing schema and activate that schema by assigning it to the required combination of sales area, cust pric proc, doc pric proc. After which finally, maintain the records using transaction code VBK1. Here give the conditon type for which you want to maintain the condition records with proper selection of materials required to be sold as a combo deal.
bonus buy

Can I use the BAPI_PO_CREATE1 to create a PO with reference to a PR?

Hi experts.
I have a big question. I have been spend many hours in this site to find an answer about if I can use the BAPI_PO_CREATE1, to create a Purchase Order with reference to a Purchase Requisition. I could n ot find nothing about this.
Can somebody tell me if can I use it?
There are some threads that say "It is posible", but I would like to know the Structure name and the field name where I have to put the Purchase Requisition in the BAPI to create my PO.
I hope that somebody can help me.
Thanks a lot!!
Best Regards.
Jesus Martinez
ABAP Developer
Comala, Colima, Mexico

I know this is an ancient topic, but in order to have all the necessary info together: (for everyone's future reference)
How to create a PO with reference to a Purchase requisition which is properly released and assigned:
Bapi_po_create1
POHeader: document type (also POHEADERX)
POItem : item number, plant, storage location, PR number, PR item (also POItemx)
and that should be all! it would be useful if SAP clarified that in their documentation because this is a very common scenario...

Problem in Sales order create using BAPI with reference to quotation

Hi,
I am creating a sales order from Quotation using BAPI /AFS/BAPI_SALESORD_CREATEFDATA.
The Sale order is getting created and the document flow is updated. When i check the status of quotation it is "OPEN".
Ideally when a sale order is created in VA01 with reference to a quotation and if all items are added in the order from quotation, then the status of the quotation must be "Complete".
When i use the BAPI, the status of the quotation is sill "Open". Has anyone faced this issue?
Even if anyone has faced this issue with BAPI_SALESORDER_CREATEFROMDAT2, please let me know...
Regards

Hi RV,
I am using BAPI to create order reference to contracts. I am facing same issue. Its not updating document flow (vbfa-plmin field). After creating orders I am forcing to update plmin field in vbfa. This worked fine. But now status in reference document not updating properly. I saw your thread. It looks like similar issue. I saw your comments "Customization was not maintained properly for the Order types ". Please can you explain little bit more about your solution. It will helps us lot.
Thanks,
srini

Error while creating condition record

Hi
Am using 4.7 and creating condition record while saving condition record am getting error NO UPDATE SERVER FOUND FOR CONTEXT E, So am stuck up and do not know whom to contact is it error for BASIS? or related with SD kindly help.
Thanx

Hi Mukesh
As you are getting error NO UPDATE SERVER FOUND FOR CONTEXT E, while saving the condition record, kindly consult your BASIS consultants and ask them to check wheather the pricing related tables and structures have been copied and uploaded properly or not.
Regards
Srinath

Create sales order with reference to 10 quotation

Create sales order with reference to 10 quotation I want to put all quotation means take reference in one sales order how I can do it because when tried va01 and taken reference of question it allow to put only one question number how can I do it for multiple question
Ahmed

Hi Raj,
If you come back to initial screen after coping the first quotation ,then system will ask you whetehr to save or cancel the data,if we select save then it will be saved immediately,else it will cancel.So ,it is not possible to copy more than one quaotation in standard SAP.The only option is to deveop a BDC with the help of abaper.
We can only create this when header data is same in all the quotations.
Regards,
Pasapula.
Edited by: Pasapula on Jul 24, 2009 9:48 AM

Create sales order with reference to contract

Hi,
I have to create sales orders with reference to a contract. When I do the recording on lsmw the line items in the sales order are assigned a number from sap. I need to keep the line item numbers the same as per the contract.
Any advice appreciated.
Regards,
Warren.

found answer

Create Sales Order With Reference to Billing Document Using BAPI_SALESORDER

Hi,
How can i create a sales order With Reference to Billing Document Using BAPI_SALESORDER_CREATEFROMDAT2?
Thanks in advance,
Alejandro.

I have to create sales order with reference to existing billing document. I have tried to following bapis.
1. BAPI_SALESORDER_CREATEed
I have successfully created document with following details.
-->ORDER_HEADER_IN:
DOC_TYPE =                  ZRK
SALES_ORG =              3000
DISTR_CHAN   =            00
DIVISION =                    00
ORD_REASON =            100
SD_DOC_CAT   =          L
CURRENCY       =         EUR
REF_DOC          =         100000028
REF_DOC_CA    =         M
-->ORDER_ITEMS_IN:
ITM_NUMBER    =           000010
MATERIAL          =          701791
TARGET_QTY     =          0000000001000
CURRENCY        =          EUR
REF_DOC           =          100000028
REF_DOC_CA     =          M
-->ORDER_PARTNERS:
PARTN_ROLE      =          SP
PARTN_NUMB      =         W12001
COUNTRY             =         NL
by providing this input i am able to create the document but it is not picking up the net value. so i have passed some extra paramters in ORDER_ITEMS_IN
COND_TYPE          =        PNET
COND_VALUE        =        14,56
COND_D_UNT        =         PC.
folowing error is occured: Condition PNET is missing in pricing procedure A V Z0000.
is it something related to configuration problem?
2.BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2
I have used same test data that is used for BAPI_SALESORDER_CREATEFROMDATA (where in i coudl succefully create doc). but here i encounterd following error.
Unpermitted combination of business object BUS2032 and sales doc. category L.

BAPI: Create Sales order with reference to Quotation

Hi ...
I am using bapi BAPI_SALESOREDER_CREATEFROMDATA2 and
i want to create sales order with reference Quotation... All quotation data like Materials prices and conditions must be copied from reference quotaion which is allready created .....
..Thanks..
..Ashish

Hello,
nice to see that this has already been solved.
But it actually doesnt work in my scenario. Do you have an example coding which will explain your solution.
Mine looks like this:
* Update Flag
ls_header_inx-updateflag = 'I'.
* Angebotskopf einlesen
SELECT SINGLE * FROM vbak INTO ls_vbak
    WHERE vbeln = iv_vbeln
      AND vbtyp = lc_vbtyp.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
* Auftragskopf setzen
ls_header_in-doc_type      = ls_vbak-auart.
ls_header_in-sales_org     = ls_vbak-vkorg.
ls_header_in-distr_chan    = ls_vbak-vtweg.
ls_header_in-division         = ls_vbak-spart.
ls_header_in-req_date_h   = ls_vbak-VDATU.
ls_header_in-ref_doc        = ls_vbak-vbeln.
ls_header_in-refdoc_cat   = 'B'.
* Angebots-Partner einlesen (Nur AG und WE)
* Auftrag anlegen
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
    EXPORTING
*   SALESDOCUMENTIN               =
      order_header_in               = ls_header_in
*      order_header_inx              = ls_header_inx
*   SENDER                        =
*   BINARY_RELATIONSHIPTYPE       =
*   INT_NUMBER_ASSIGNMENT         =
*   BEHAVE_WHEN_ERROR             =
*   LOGIC_SWITCH                  =
*   testrun                       = 'X'
*   CONVERT                       = ' '
   IMPORTING
      salesdocument                 = ev_vbeln
    TABLES
      return                        = et_return
*      order_items_in                = lt_items_in
*      order_items_inx               = lt_items_inx
      order_partners                = lt_partners
*   ORDER_SCHEDULES_IN            =
*   ORDER_SCHEDULES_INX           =
*   ORDER_CONDITIONS_IN           =
*   ORDER_CONDITIONS_INX          =
*   ORDER_CFGS_REF                =
*   ORDER_CFGS_INST               =
*   ORDER_CFGS_PART_OF            =
*   ORDER_CFGS_VALUE              =
*   ORDER_CFGS_BLOB               =
*   ORDER_CFGS_VK                 =
*   ORDER_CFGS_REFINST            =
*   ORDER_CCARD                   =
*   ORDER_TEXT                    =
*   ORDER_KEYS                    =
*   EXTENSIONIN                   =
*   PARTNERADDRESSES              = .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      wait = 'X'.
Unfortunatly this just makes the reference to the quotation but does not takeover ALL data from header and pos level.
Thanks and regards
Markus Armbruster

Can we create outbound delivery with reference of purchase order

Hi All,
can we create outbound delivery with reference of purchase order?

dear friend,
as far as i know you can create it with the following references:
-to sales order;
-to STO;
-to subcontract order;
-to project;
-without any ref
are you talking about stock transport order ?
regards,

ORDERS05 - Create a Return with reference to a Sales Order

Hi all,
I'm trying to create a return with reference to a sales order via IDOC ORDERS05. I'm indicating referenced Sales Order number into segment E1EDK02; indicating qualifier (QUALFR = 002) and Sales order number (BELNR). By this way, I create a Customer Return but without reference.
Which fields or segment have to be filled in order to create it correctly?
Thanks
Marí

Correct...
You need something like:
*Get the pricing cond number.
select single knumv from vbak into cond
where vbeln = '0000080347'.
if sy-subrc = 0.
Get the pricing record which are by line item.
select * from konv into table konv_tbl where knumv = cond.
Loop thru them one line at a time.
loop at konv_tbl.
   bapi_cond-itm_number = '000010'.
    bapi_cond-cond_st_no = konv_tbl-stunr.
    bapi_cond-cond_count = konv_tbl-zaehk.
CALL FUNCTION 'BAPI_CUSTOMERRETURN_CREATE'
EXPORTING
    RETURN_HEADER_IN               = bapi_hdr
   BUSINESS_OBJECT               = 'BUS2102'
    CONVERT                        = 'X'
IMPORTING
    SALESDOCUMENT                 = bapi_salesdoc
   RETURN                        = BAPI_RET
TABLES
    RETURN                        = bapi_ret_tbl
    RETURN_ITEMS_IN                = bapi_itm
    RETURN_ITEMS_INX               = bapi_itm_out
    RETURN_PARTNERS                = bapi_prtnr
    RETURN_SCHEDULES_IN            = bapi_schd_lin
    RETURN_CONDITIONS_IN           = bapi_cond. "pricing
ORDER_TEXT                    = bapi_text.

One question about Pricing and Conditions puzzle me for a long time!

One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
1-First,my sale order use pricing procedure RVAA01.
2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
4-Next,the Access Sequences PR00 have some Condition tables,such as:
     table 118 : "Empties" Prices (Material-Dependent)
     table 5 : Customer/Material
     table 6 : Price List Type/Currency/Material
     table 4 : Material
5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

Hi,
You said that you are using the T.codes VK31 or VK32.
These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
Pl check using T.code VK11 OR VK12 (change mode)
Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
You can give all the required values and save the conditon record.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
praveen

Questions about VK34 (create condition record with reference)

Similar Messages

Maybe you are looking for