Questions and problems with 7.2.1

I updated to 7.2.1 when it first came out. However, I have noticed that I've been loosing my connection frequently, about once every couple of days. (I was gone for a honeymoon most of the time however). I would be working fine, then all of a sudden, I'd loose connection to my disk, the web, and even to the router itself. Meaning, I'd go into airport utility and it cant find the router, even though I'm connected to it.
I downgraded back to 7.1.1 and all seems to be better.
Has anyone else noticed this with 7.2.1? I hope so, or else my router is failing...
ALSO, what does it mean by saying that 7.2.1 is "wifi 2.0 certified"? Are there any improvements in 7.2.1 that are not in 7.1.1? Thanks.
Ryan
Message was edited by: rpeters83

Ryan,
as to your 7.2.1 problem: MANY people had that same issue and did revert to
7.1.1 (I did the same after being unable to connect once I upgrade) So no
worries - your AEBS is fine as it is working with 7.1.1
For the second part, I am not a wifi guy, but check out the article on
http://www.bbwexchange.com/pubs/2006/09/20/page1397-228167.asp
maybe that will give you some idea about WiFi 2.0 and if you benefit from it!
Joerg

Similar Messages

A few Technical questions, and problem with entitlements

Hello everyone,
I always hate my first post being a question, or several in this case, but I have no other option and wouldn't have found this forum if it weren't for the knowledge already spread.
Background...
Using Windows Vista and Flash CS5;
I am using a second gen ipod touch;
Made a small Ball app;
Used the following videos followed to the "T" to make a Certificate, .p12 file, and provisioning file
certificate...
http://www.videomo.com/yvideo.php?i=bXB6U1hBcWuRpVzBxVUk&create-an-iphone-developer-certif cate-from-windows/
.p12 file...
http://www.youtube.com/watch?v=4GteMgFvA1Y
provisioning profile...
http://www.youtube.com/watch?v=ni-9jZPcZ1E&feature=related
To the best of my knowledge everything is setup in portal the right way... and i mean: Device is added, checked udid several times and device name is same...bundle ID is correct in publishing settings...I used my NAME (was a problem for some people) for CN when doing the above... I have dragged the profile to the library in itunes and synced. I have UPDATED my iphone to the 3.whatever platform, and updated itunes to 9.X ...I have dragged everything to library and synced...i have restarted ipod and comp several times...
i have tried publishing as test, beta debugging, and adhoc...no luck with any of them.
At first, i had a "app cannot be installed because the signer is not valid" error when syncing the app through itunes...but then i dragged provision profile to ipod and I now get...
"The application "Ball" was not installed on the iPod "Wiggles" because the entitlements are not valid."
I spent all night last night trying to diagnose this problem, found very little info, someone else posted here, but it was never resolved.
I have checked again and again that the device is the right device, and i have remade my certs, provisioning profiles...p12s....exports, publications...etc....again and again.
Please help!
SECOND question: Am I not going to be able to release any apps in the iphone store because of the apple not supporting flash thing? (basically, i'm asking if i should stop learning this, altogether and just learn a different language and platform for development for iphone.
I do not own a mac, so I am trying to work around that.....
Any advise is appreciated! Thanks !
thank you...
kmrproduction2

How did you solved, I have tried everything nothing works. My app id is 83TUF2RQRE.com.company_name.appstest, the screen from apple iOS Provisioning Portal -> App ID looks like this.....
Descriptions
Apple Push Notification service
In App Purchase
83TUF2RQRE.com.company_name.appstest
testapp
Configurable for Development
Configurable for Production
Enabled
I don´t know how to use it...... I'm working on WIN7 Flash CS5, I got an Ipad where i have to test a really simple app, and i cannot get installed cause of "entitlements issue". Ca Some one give a Hand on this one....
Thanks.....

Questions and problems with CS4

Hi, I'm trying out CS4. I have some problems and questions I hope someone can answer. I only care about the code editing part.
1) My "Open Recent" menu in the File menu is always empty. I've opened all kinds of files over the past few days and it never updates/adds to that list. its always empty. When is this suppose to update?
2) When I edit .inc files they're not color coded. How can I tell Dreamweaver to color code .inc files too? It doesn't matter which color code (.HTML, .PHP, etc.) it uses.
3) Whats the best way to change the color setup for a given file like .HTML? Edit some Dreamweaver .xml file or in the preferences somewhere? Or another way? is it possble to essentially create a custom color combination and apply it to HTML files?
4) How can I get rid of "Share My Screen" in the file menu? When I hit ALT-F, then S - I would like it to save the file out of habit. All I get is a share my screen now. Not sure what genious organized that but its kind of a stupid place to put it.
I'm under Windows 7 64bit. Dreamweaver version 10.0 Build 4117.
thanks for any help.

You can edit color coding in >edit>preferences (ctrl-u)...
...and whilst you are there you can select in the general tab to open the files you had open in your last session.
I don't konw why the list of files isn't populated and I don't know about .inc files.
Instead of using >ctrl-f >s why not go for ctrl-s or shift-ctrl-s?
Martin

A way to find my previous questions and problem reports?

Is there a way on this forum to find my previous questions and problem reports? Since posting a question earlier today, I've found MOST of the answer and would therefore like to append what I found to the question, without waiting for someone else to answer it. I don't remember the title I gave the earlier question, or I'd use that title in searching for it.
The troubleshooting information below is more relevant to a previous problem than this question.

'''My Contributions''' link on a main forum page should display a listing of all your postings.
[https://support.mozilla.com/en-US/search?q=&num_voted=0&num_votes=&asked_by=milesrf&answered_by=&q_tags=&created=0&created_date=&updated=0&updated_date=&sortby=0&a=1&w=2 See this forum search for your Username under "Asked by"]

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works

IPhone SDK question. Problems with Addressbook and Addresses.

I know the api is closed as of beta but I have serious problems adding street, zip and city terms to the multivalue address property. I am doing an application for release around the new model of iphone and any information about how to use the address property would be great. I can say, phone numbers I can add as many as I like as of now its only addresses I have problems with, and sadly I can't find information anywhere, including the SDK documentation how to write these properties to a record.
I hope any of you can help me or give me a number I can call for help directly from apple.
Thank you in advance.
/Klaus

I still wonder about this, but I got a new issue and that is adding a "default" photo to the address record I am creating.
I try load my application icon from the application resources to add it to the addressbook record.
NSString* imageName = [[[NSBundle mainBundle] pathForResource:@"Icon.png" ofType:nil]];
NSData *iconData = [[NSData alloc] initWithContentsOfFile:imageName];
ABPersonSetImageData(person, [[iconData bytes]], nil);
Ugh the iconData gets allocated and initedWithContentsOfFile imageName. And yes it loads. Offtopic, how to mark segments as code so no fancy functions strip text and whitespace from my code exampes on the forum?
But get bad access when I try add the image to the record. I know there was some articles on blogs about this last week, but seems like they been pulled off now.

Windows XP tablet edytion and problem with driver X200

Hello
I have problem with Windows XP Tablet edytion , I must working with this system . Microsoft stop all. I do not have a one driver is SM Bus controller and not work tablet button . Can you help me ?

Hi Wogabun and welcome to the community,
Download and install TVSU and run it and see what it comes up with. You'll need MS Net Framework 1.1 or 2.0 at least for it to run.
Regards,
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Alligning page to very top of browser window and problem with a random error symbol

Dear reader
Before I start I would just like to say sorry for posting
another help request so soon after I have posted one before but I
am having a problem with my website. My website is www.iggpog22.com
(but you must include the www. or it goes to the wrong site I do
not know why) anyway I seem to get a random questionmark at the top
of my webpage which is rather annoying. I believe it may have been
the result of me trying to use the google search bar code and
perhaps I left some old code in but I have searched and just cannot
figure this out. Is it possible anyone could inform me of how to
remove it aslong as it is not much trouble. I would also like to
know how I can get the main section of my site to touch the top of
the browser screen instead of leaving a gap for the background to
show (and aswell if I can do the same for the bottom of the page)
Thank you for any assistance
.Sam

02cspearson wrote:
> Dear reader
> Before I start I would just like to say sorry for
posting another help request
> so soon after I have posted one before but I am having a
problem with my
> website. My website is www.iggpog22.com (but you must
include the www. or it
> goes to the wrong site I do not know why) anyway I seem
to get a random
> questionmark at the top of my webpage which is rather
annoying. I believe it
> may have been the result of me trying to use the google
search bar code and
> perhaps I left some old code in but I have searched and
just cannot figure this
> out. Is it possible anyone could inform me of how to
remove it aslong as it is
> not much trouble. I would also like to know how I can
get the main section of
> my site to touch the top of the browser screen instead
of leaving a gap for the
> background to show (and aswell if I can do the same for
the bottom of the page)
>
> Thank you for any assistance
> .Sam
>
why not just look at the code of your page? it's there:
<td width="88" rowspan="2" align="center"
bgcolor="#333333"><img
src="Images/Iggpog22Index/dev_id/ig2lgonobg.png" width="78"
height="75" /></td>
ï¿½
Just remove that question mark, whatever it is.
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com

P35Neo2 FIR and problem with booting

So I have problem with booting my compie. Compie try to boot to the part of start windows, after that in case of switch into graphicis mobo going down and restarting (WinXP SP3). I think, that problem is not in PSU, cos i have 800W XILENCE (+3,3V 28A, +5V 32A, 4x+12V 20A, -12V 0,5A, 5VSB 3A), Board P35 Neo2 FIR, E7200 proc, bios 1.9 (updated). I have 5 disk and use raid function in bios. Graphic Radeon HD3650, Memory Zeppelin 4x1GB KIT 800Mhz.
I start with change of PSU from 550W to 800W but it didnt work, previus PSU had (+3,3V 30A, +5V 32A, 2x+12V 18A, -12V 0,8A, 5VSB 3A),
i try change memory, but no efect.
After update bios there was standard warning about bad cheksum, after resave Bios settings it was gone, and compie boot after that.
Any idea?
Thanks

So my problem is solved...but my feeling of this is not good...
I updated BIOS from 1.9 to 1.10, reset Bios settings, after restart i pressed F2 for load standart settings and i changed in Bios only that i am using RAID and disable disket and it works...i boot my compie into windows without any problem...
So i try change another things in Bios and my compie hangs in continous resets without booting into windows...no BSOD only restart and restart...
After reseting Bios settings and again Load to Default it works...and run windows...
There was only one new thing ... screen flick for the second with new screen about checking NVRAM ....this screen was not visible before (and maybe this is the problem), cos if i change something in BIOS about clocking and power management and other ones, this screen is by booting missing...and compie not run in Windows...
Next thing what i see, that in CPU multiplication dont work multiplication 9,5 and proc used frequency 2400 (9x) (it is E7200 on 2533)
i hope that this bios 1.10 fixed my problems...and my opinion is that P35 Neo 2 FIR is not ideal board for E7200 proc...so i m looking for another proc...and maybe another board...

Choosing between external and partner application and problem with login

We have an application on Oracle App Server 10.1.3.3 and we have an OID server.
I had taken this for granted that I should define the application as 'Partner Application' and not external application for single sign on.
Now that we need the 'PASSWORD' retrieved by application, we are considering defining it as an external application.
There are at least two problems I have encountered defining the application as external:
1. 'pageConfig:serverDate' is among the login form's inputs in the login page, but I can't set it in orasso 'Edit External Applications' page
2. After login using SSO as external application and when I click on the application's new link, the login page is shown with the username and password field filled, but I have to click on login button anyway (no automatic and invisible login).
I will be very grateful if someone gives a general view on the differences between external and partner, whether in this case external has to be used or partner and finally give some comment on my specific problem with login button and manual login.
Thank you

Just some information :
- The problem with LOGIN page exists. I don't have that problem with for example GMAIL when defined as external application, but with my applications in Oracle Application Server.
- There is also another thing I don't understand. The link to external application is something like:
javascript:open_jwindow('../ealogin?ID=76D4766','76');
and couldn't be executed outside pls/orasso
in other words we can't give that to our users, can we? They should login to orassso and see that?
We don't want to involve them in Identity Management...
Any help is appreciated....
Regards

Alpine CDE-103Bt Head Unit and Problem with 160 Gig Ipod Classic

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

Workflow and problems with labels

Hello!
I've been testing out some things in Edge and I've noticed a few things that I've been trying to find some documentation and information about, I would greatly appreciate any enlightenment on the following observations:
Frame labels do not work for me - both with files created from scratch in Edge and ones made of existing HTML + CSS files. I tried the in app lesson on looping the counter and the 'Play from (loop)' doesn't work, I thought it might have been because of an error in the instructions telling users to play from a frame label that exists at the same point in the timeline where there is a 'stop' trigger but even offsetting the 'loop' label would not work. The final sample file works as intended when previewed.
I tried a few tests with new files consisting of really basic stuff - one symbol with an 'on-click' > play from (go/start/in/one/etc) and another symbol simply animated on the x and y axis with an animation to the opacity with a stop trigger placed on the timeline and tested with the play from label placed both at the same time as the stop trigger and offset after the trigger - neither works it has no effect when clicked. (I know about what scripts to do on completion to get it to play from the start) Interestingly play from (milliseconds*) *0.125/1001/2000000 etc does work for me but this is not ideal as it is far more useful to be able to play from labels.
Animating existing HTML - I've got a simple html page set up consisting of a container div with a number of other divs inside which I have been animating in Edge. The Edge file is set up so the container CSS overflow is hidden. Now can someone please clarify if the following method of workflow is a mistake on my part, limitation in HTML+DOM, bugs in edge or combination/none of those things?
Workflow - bring in the html file to edge do simple animated opacity etc on the various elements start adding keyframes and labels etc - the label problems as above. Now my intent is to have each of the div's in the container be clicked on and bring in the next one - in the same place in the viewport. I've noticed that when changing various elements visibility after tweaking animation to look good and then subsiquently setting on-off keyframes for visibility it would suddenly cause all elements lower in the DOM to move position and suddenly have what looked like keyframes for y axis position/transform? Is this bad practice to use the on-off visibility for elements? It meant that what should be a really simple and quick 10 second animation took about 3 hours to make, should we be not using the on-off keyframes for showing/hiding buttons that are in divs that sit on top of each other? Should i set up z-index values for all elements in the CSS files? (I saw a reference to you can assign z-index values in the 'elements' panel but I can only see 'arrange' - is this a different term for z-index?)
I'm a long time user of flash, maya, after effects, digital fusion, combustion, and many other timeline based software tools - it is fairly intuitive to me picking up new systems but the issues with on-off visibility and keyframes below in the timeline really was a very frustrating workflow. I'm used to changing and editing the whole animation on the timeline seeing what works and doesn't - deleting layers, changing timings etc, i found this way of working really slow due to changes to elements position when ones above in the flow were turned on or off. Please do suggest what I should change in my approach to using edge as compared to other animation tools as it looked great on preview but I'm a bit frustrated in using the release. Is this a bug in my release?
Where is the help and reference files for Edge? - is this screen shot it? -
I can't find any info on basic definitions of the tools and options anywhere, and can't find much on anything to do with using edge in production with existing HTML documents, please send me some links if you have them. I've seen the edge javascript API thing but is there anything else?
Cheers.
Here is the approximate code of the page for reference - I actually got the file working in the end but using 'play from (miliseconds)' instead of play from (label) and much frustration slowly editing the timeline and elements visible/hidden status and redoing animation on elements below in the timeline to get them placed correctly.
HTML:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Master Document with base styles</title>
<link href="css/master_styles.css" rel="stylesheet" type="text/css" />

<link rel="stylesheet" media="only screen and (min-width: 320px) and (max-width: 480px)" href="css/mobile.css" />
<link rel="stylesheet" media="only screen and (min-width: 768px) and (max-width: 1024px)" href="css/tablet.css" />
<link href="css/desktop.css" rel="stylesheet" media="only screen and (min-width: 1025px) and (max-width: 3000px)" />
<style type="text/css">

</style>
</head>
<body>
<div id="container">
         
            <div id="mainContent">
                <div id="mainlogo">
                </div>
            </div>
            <div id="firstButton">
                  <div id="Abutton1">
                  <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                 </div>
            </div>
            <div id="transition1">
                   <p>Wipe transition 1</p>
            </div>
            <div id="secondButton">
                    <div id="Abutton2">
                   <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                   </div>
            </div>
            <div id="secondContent">
                <div id="Abutton3">
                <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                </div>
            <div id="text1">
                  <h1>Heading </h1>
                  <p>Byline</p>
                </div>
             </div>
<div id="transition2">
    <p>Transition 2 - TBC</p>
</div>
      <div id="thirdContent">
      <div id="lastbutton">
        <p><img src="img/end_icon_crop.png" width="150" height="150" border="0" /></p>
      </div>
      <div id="text2">
        <h1>Heading</h1>
        <p>Byline</p>
      </div>
</div>
    <div id="transition3">
        <h4>Small print</h4>
</div>
</div>
</body>
</html>
CSS:
(master_styles.css)
@charset "utf-8";
body {
    margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
    padding: 0;
    text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
    color: #19171B;
    font-family: AFBattersea;
    font-size: 100%;
#container { /* the main holder for all of the viewport content - an image frame */
    text-align: left;
    margin-top: 0;
    margin-right: auto;
    margin-bottom: 0;
    margin-left: auto;
#mainContent {
    z-index: -1;
#firstButton {
#transition1 {
    color: #FFF;
#secondButton {
#secondContent {
#transition2 {
    color: #FFF;
    height: 100%;
#thirdContent {
#transition3 {
    color: #FFF;
#mainlogo {
    background-repeat: no-repeat;
    background-position: center center;
    background-image: url(../img/960_off.png);
#Abutton1 {
#Abutton2 {
#Abutton3 {
#text1 {
#text2 {
#lastbutton {
#text3 {
(desktop.css) - I've not included the other css files referenced in the media queries as they only contain names of elements for this purpose
@charset "utf-8";
#container { /* the main holder for all of the viewport content - an image frame */
    text-align: center;
    margin-top: 0;
    margin-right: auto;
    margin-bottom: 0;
    margin-left: auto;
    height: 700px;
    width: 1024px;
.mainContent {
    height: 100%;
#firstButton {
    height: 100%;
#transition1 {
    height: 100%;
#secondButton {
    height: 100%;
#secondContent {
    height: 100%;
#transition2 {
    height: 100%;
#thirdContent {
    height: 100%;
#transition3 {
    height: 100%;
#mainlogo {
    background-image: url(../img/960_off.png);
    height: 72px;
    width: 960px;
    margin-top: 364px;
    margin-right: 36px;
    margin-left: 36px;
#Abutton1 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#Abutton2 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#Abutton3 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#text1 {
    text-align: left;
    margin-top: 16px;
    margin-left: 320px;
#text2 {
    text-align: left;
    margin-top: 16px;
    margin-right: 330px;
    margin-left: 360px;
#text3 {
    text-align: center;
    text-indent: -192px;
    width: 320px;
#lastbutton {
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
    height: 150px;
    width: 150px;

Hi,
I wonder if it's related to the multilingual capability of BPM Object presentations.
Could you:
1. right mouse click the project in the Project Navigator tab.
2. click "Project Preferences"
3. click "Languages"
Do you see multiple languages? Is English (or whatever language you're using inside Studio) the default?
When you log into the WorkSpace, could you double check the language you are using (log in -> click "Settings" in the upper right corner) -> with the "Display" tab selected, is the language you chose as the default in Studio selected?
I suspect the reason you see some but not all of the labels is because you have defined some of those labels in the language selected in the Workspace. You can add the addtional labels for the various languages you want to support if you:
1. Open a presentation
2. Click one of the labels
3. In the properties tab on the right, click the field beside the "Display" property
4. Click the button with the "..." on the right side of this field
Hope this helps,
Dan

Spanish Dictionary and problems with spanish special characters

I need a spanish dictionary, with all spanish words. I know that your priority are france, spanish, germany and Italy. So, the component has problems with spanish special words, this problem was notified before.
Have you ready something? A new version?
Thank you for your time.

For the special character issue, you can check the reference:
http://forums.adobe.com/message/2430501

A lot of bug in ios 7 and problem with the iphone

There is a problem with ios 7 when I delete history with my iphone 4s ...and only one month after that I've buy my iphone appared a problem with the wi-fi!!!!!!

Try https://discussions.apple.com/message/23175298#23175298
Allan

MobileMe Gallery and problems with new password

Hi. I'm using iPhoto 09, and have posted many MobileMe galleries over the years. Recently, I changed my MobileMe password. Now, iPhoto tells me that an "error occurred with the publication of album 'XYZ' Your MobileMe account information is not correct. The provided login or password is not valid" and it prompts me to return to MobileMe Preferences to re-enter my correct login and password. Well, the trouble is that I've done this many times. (Which also causes sync problems - but that's another story.) And though my System Preferences are now correct, I still cannot successfully update a MobileMe gallery in iPhoto. I checked my settings in the Keychain, and all is fine. I also trashed iPhoto preferences, but the problem still remains. Any thoughts on how to solve this irritating problem? Thanks!

I found another solution based on this posting.
http://forums.macrumors.com/showthread.php?t=689762
Works perfectly.
+I have the same problem and started a thread about it on Apple's discussion board, see http://discussions.apple.com/thread....art=0&tstart=0+
+First, I'd suggest sending Apple feedback on it (select "Provide iPhoto Feedback" from the iPhoto menu).+
+When you change your MM password, you need to enter the new password in MobileMe in System Preferences. When you select MobileMe in System Preferences, it will (correctly) say that your password has changed and ask for the new one.+
+It looks like the problem with iPhoto is that when you enter the new password in MobileMe preferences, the keychain entry for it isn't being updated. Look for publish.me.com in Keychain Access. It will probably have the old password. Changing it there and then signing out/in in MM System Preferences seems to fix the problem with iPhoto. If not, try deleting publish.me.com in Keychain Access and then sign out/in to MobileMe in System Preferences.+
+Give it a try and post what happens.+
Jay

Questions and problems with 7.2.1

Similar Messages

Maybe you are looking for