Questions/conditions/needs related to the PBX

Dear Cisco,
I act on behalf of my boss who is planning a larger IT investment, but needs some background information.
So far, we used an open-source free PBX, but after we've recognised its deficiencies, we decided to buy a commercial product.
To tell the truth, we hesitate between some products, and we need some confirmations related to the concerned PBXs. One of them is Cisco.
So our questions/conditions/needs are as follows:
The PBX needs to be an IP PBX.
Basic PBX features that we need: conferencing, video calling, voicemail, call queuing, IVR.
The type of all the desktop phone we use is Grandstream GXP 2000. The PBX should be compatible with this device.
We have a special corporate VoIP SIP phone ("softphone") developed by Ozeki's third party SDK. I am confident that we will continue to use this SDK, so the PBX should be compatible with this software.
And the last one: we would like to use Android smartphones as the part of our telephone system, so the PBX should support mobile extensions.
Please indicate if there is a solution that fulfills the above requirements. If so, please suggest me the proper product/service here or send me an e-mail to [email protected]
I wanted to post this message here intentionally, because any further personal comments/experiences coming from the community would be appreciated.
Best regards,
Donna E. Hill
[email protected]

hi
try SQADB01
regards
thyagarajan

Similar Messages

Help! I have an imac m6498 question(s) need help on the following ASAP thanx

i found an imac m6498 at my grandmas's, its working smooth and great. However, i have these problems:
idont have admin (she doesnt remember the password nor how to remove it)
i dont have the cd repair and backup etc, nor does she
cd drive works well (i need info on how i could reset this so i could use the pc like it was new)
i was thinking of transferring mac os 9 [or leopeord, cuz i saw a forum that its possible] into a usb ext hard drive and installing it there
the main problem is, i dont have admin. It says "you do not have access privileges"
other questions:
is there a way / combo buttons/commands that i could do to reset, change, redeem the password.
thank you, sorry for the woording, i rushed it. heehhe

James,
That machine is over 10 years old and is not an Intel based iMac, Apple began using Intel microprocessors in 2006 a full 5 years after your machine was made. It is a PPC (Power PC) based machine which cannot run Leopard. In other words you are in the wrong forum. You can reset the password per Resetting an account password however you need the original Install discs. If you don't have those your last option is to contact Apple and see if you can get a duplicate of the originals, you need these because they are machine specific. I suspect that due to the age of the machine you won't be able to get them.

Stupid question, but need help none the less...

I'm one step away from testing out my new system with a K8N Neo Platinum board, but I don't know where to plug in the ground wires. I have a Lian Li PC65B and there's a ground 1 and 2 wire, where do I plug them in?

Uhhh, I didn't see a ground wire from teh PSU, *runs back to check*.....but in my case has two single pin, like power switch or reset switch size, connectors, that say ground 1 and ground 2.

Question related to the Federated Portal Network.

Hi All,
I have a question related to the Federated Portal Network.
I have to configured FPN between two portals :
1. BI-portal (Producer Portal) (EP 7.0)
2. Portal for other systems (Consumer Portal) (EP 7.0)
Can anybody help regarding this, I need material or URLs ...
Thanks & Regards,
Jay

Hi Jay,
Check out following links for fedrated portals
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/703cfbbd-e85e-2a10-00a3-ecd502c08e82&overridelayout=true
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70191d1e-2bd1-2a10-d9b7-ba19500da527&overridelayout=true
Regards,
Vaishali

I have a question related to the discussions forum,

and here it is:
In which thread should I post a technical question about the "Apple Care" warranty--it doesn't seem to have its own heading like the other products and services offered by Apple.
All I really want to ask is, "Why is it that I'm being asked for thirty dollars for a repair that you acknowledge is covered by the additional warranty that I've purchased? I was under the impression that one purchases a warranty so that he or she will NOT have to pay for repairs covered by said warranty."
Anyhow, please let me know where I may direct my question.

Hello,
I recommend using the phone instead of these forums. The forums are user-to-user and are much too vast for Apple employees to ferret out the user who have special warranty needs or issues.
Your AppleCare plan should have come with a toll-free contact number. Talk to someone there and, if that does not give satisfaction, ask for a customer relations supervisor.

Need to show total of condition result only not the detail

Hi,
I've created a query to report the number of shopping carts with a value over $1000 for a given period of time. I included the shopping cart and its value in the query but do not display them. Then I created a condition to keep only those > $1000. I get the correct result but too many rows, basically one for each shopping cart that meets the condition - I want to report only the result line (total) only per period.
Any ideas?
Thanks
Suzanne

Often when using Conditions, you need to change the Results properties to Summation, so that it sums and displays just the rows that have satisfied the condition(s). Without the Summation option, the Result row totals are for all the detail rows, including the rows that are not displayed because they meet the conditions(s).
Sounds like in this case you would need to add VB code to the workbook to suppress the detail rows and just display the Result rows. Don't have an alternative if you are trying to do this on the web.

My question is Itunes related. How do you prevent a playlist saved in Itunes from alphabetizing the song list created. I wanted to keep the original order, and somehow everything was alphabetized without requesting it.

My question is Itunes related. How do you prevent a playlist saved in Itunes from automatically alphabetizing the song list. I had a specific order of songs that I wanted, and Itunes somehow automatically alphabetized them. Is there a way to turn that feature off, and/or get them back to the original order? I also noticed that once a playlist has been created, I cannot manually changed the order of the songs from my desktop.. Any suggestions?

That's just the sort order. It's displaying the media alphabetically because you have clicked on the NAME column near the top of the iTunes window.
Click on the little triangle above the column of numbers (usually on the far left side of the main iTunes window) and the media will sort in the order in which you added each item to the playlist.
You can easily reorder songs within a playlist: Click and HOLD on the song you wish to move, then drag-and-drop it wherever you like.

I just created an iCloud email and I want to use that email for my iTunes account as well. I need help suiting the old apple I'd because I do not remember anything associated with that email and I don't know the security questions

I just created an iCloud email and I want to use that email for my iTunes account as well. I need help switching the old apple ID because I do not remember anything associated with that email and I don't know the security questions or the login for that old email.

You cannot do that. The AppleID you used to create the iCloud account is an active primary email address. The email address you created with the iCloud account is also an active primary email address (all Apple domain email address automatically become AppleIDs as well). You cannot replace the primary email address on one active AppleID with the primary email address on another, active AppleID.
You can use your iCloud email/AppleID with iTunes, but it will be a separate account, so all your previous purchases remain tied to the other AppleID you have.
I don't understand your statement that you could not remeber your old AppleID password, as you would have had to use it to create the iCloud account in the first place (the first step of creating the iCloud account required you to login with your existing AppleID and password)?

Hello. So I have used my iPod touch 4g for 2 years now and need to change the battery. My question is: will I lose everything I have on my iPod like my music,pictures and apps if I change the battery on my iPod touch 4g?

hello. So I have used my iPod touch 4g for 2 years now and need to change the battery. My question is: will I lose everything I have on my iPod like my music,pictures and apps if I change the battery on my iPod touch 4g?
Thanks for answer

If you go to Apple, they will not replace your battery, but exchange your iPod for a refurbished iPod of the same model with a new battery. Therefore you will lose everything that is not backed up. If you change it yourself or have a third party change it, you will most likely not lose anything (but still best to make a backup as lllaass suggested).

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos. The question I need answered is ( and not able to find the answer on any of you help pages)..... Do the following have free copyright

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos.
The question I need answered is ( and not able to find the answer on any of you help pages).....
Do the following have free copyright to publish on facebook and U Tube?
1.Garage band sounds?
2.Slide show...Sample music and Theme music?
3.iMovie...iMovie sounds and iLife sounds ie.Medal Ceremony and Memorial etc?
I note one can publish to shared net places directly from iMovie so one assumes these are copyright free for non-profit making and non-comercial use.
It is impossible to contact apple direct.No email address.We put our selves at risk without this knowledge and like applemac, facebook will not communicate direct.Will applemac please take responsibility for copyright/the above that they are all too willing to sell to us but not support us with that knowledge.
I have Mac OS X Snow Leopard version 10.6.2 (2009 bought in 2010)

Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.

I forgot my security question and it won't let me buy any songs but whenever i go to manage my apple id it says i need to tell the answers to the security questions but i don't know them someone please help

i forgot my security question and it won't let me buy any songs but whenever i go to manage my apple id it says i need to tell the answers to the security questions but i don't know them someone please help

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, and filling out and submitting this form.
(96813)

In the icloud settings, i am told i need to accept the terms and conditions to use icloud, but when i try to do so, i get a message "unable to connect to server". This has been going on for a week. There is no problem with either my wifi or cellular conne

In the icloud settings, I am told I need to accept the terms and conditions to use icloud. However, when I click on "Terms and conditions", I get a message "unable to connect to server". This has been happening for a week now since I upgraded to iOS 7.06. There is no problem with my wifi or cellular connectivity, all other applications work perfectly. P.S.I have never used icloud before, but wish to do so now. How do I overcome this problem?

Have you turned the iPad off then back on? That often helps with problems.

What questions do I need to ask the IT department?

My employer recently set up wireless access for our whole campus, and I'd like to be able to connect to it with my MacBook.
This isn't a hack job - I'm fully authorized to access the network. My problem is just that when I called the Help Desk to ask what settings I should use to configure Airport, I got the answer we always get in our group whenever we ask a question: "Sorry, we don't support Macs. If you want to use this feature, you need to request a Windows PC from the hardware support team."
I've got some people in IT that I can call who probably can help me "under the table" -- but I'll need to know EXACTLY what info I'll need and where they can find it on a Windows system. Can anyone tell me what I should ask for in Windows-ese, and how to translate their answers into what I need to configure the Airport card?
Note: I've tried scanning with KisMac and identified maybe a dozen wireless networks visible from our building, both managed and non-managed and with an assortment of open, WEP and WPA access -- so the range of possibilities is too large to get very far with trial and error.
Thanks for any info...

Just ask them for the network name and if wireless encryption is enabled. If wireless encryption is enabled, ask them for the associated password.

I use Pro Logic 9 and see that to upgrade to Pro Logic X I need to buy the full package again. Does apple offer special conditions for their Apple clients ? Are users of apple care protection plan better served ?

I use Pro Logic 9.1.8. and see that to upgrade to Pro Logic X I need to buy the full package again. Does apple offer special conditions for their Apple clients ? Are users of apple care protection plan better served ?

Old saying applies here most of the time......
"If it ain't broken, don't fix it"
I choose to use LP9 with Snow Leopard myself (10.6.8 and 9.1.6) for most of my commercial work simply because I find that combo very stable and provides the best overall performance for my setups here... but I am also using LPX with Mavericks as part of my client support and that works fine too although with a drop in performance due to the heavier demands made on the hardware by the newer OS X and LPX graphic routines for example..

I have created a .png logo to use on my video. It has it's own storyline so the logo is shown overthe whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

Final Cut Pro 10.0.8
I have created a .png logo to use on my video. It has it's own storyline so the logo is shown over the whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Questions/conditions/needs related to the PBX

Similar Messages

Maybe you are looking for