Questions for BAS

Questions for BAS
New to this forum, but I am running three Athlon 64 Boards here. The Abit MAX3 the MSI NEO on the KT800 chipsets. Also running a Gigabyte Nforce 3 K8NPro.
You have stated in many posts that the CPU decides what memory it uses, well I have to raise a few points. I have two sticks of Kingston Hyper X with Winbond BH5 work in both the MSI and the Abit, Two sticks of Kingston Hyper X Winbond CH5 will only work in the Abit, not in the MSI, all sticks also work on the Gigabyte. That disproves your theory somewhat. Also Abits bios update has listed as improved memory compatibility, if that is the case, then it is obvious that they cannot change your processor so they must be changing board paameters, relating to timing or voltages. This is a confusing issue.
Regarding the PCI Lock, and that the FSB does not control the hypertransport or PCI clock, why would VIA be busy implementing this in the K8T880 if it had no effect, and why does the hard drive get corruption above 230 fsb if the clock is not changing, it does not happen on the Nforce150 chipset. Also Cool and Quiet works by manipulating the multiplier to change the processor frequency, this is a multiplication of the FSB, and CPU Z also is able to read correctly the FSB.I am not saying that what you say is incorrect, but I am trying to evaluate the situation here.
Some explanation would be welcome as I have not read this explanation anywhere else on the web, and no major hardware review site states this either. Lost Circuits has a pretty thorough review of the chipset and states issues with the PCI clock and hypertransport clock changing. If you use the Nvidia system Utility on the NForce 3 board it also reports the Hypertransport clock, and that is a direct association with the fsb and multiplier. Comments welcome. Also any idea when the voltage issue will be fixed regarding the Vcore, I know of a Beta bios but is it likely to be released soon. Strange thing is the Gigabyte board does almost the same thing, but will og to 1.55 just like the MSI will using windows to overclock.

Hi,
As for the memory controller, see this document:
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/23932.pdf
As for the via chipset:
http://www.via.com.tw/en/k8-series/k8t800.jsp
Anyway, it's actually funny, as everyone has a different story....
And nobody tells exactly how it's done, not even AMD....
I just gave my best idea of how it works, as nobody seems to know exactly (or doesn't want to say) it's all guessing....
As Anantech has another idea as well:
http://www.anandtech.com/cpu/showdoc.html?i=1856&p=3
He say it's taking it from the HT bus.....and the FSB doesn't exists....
But my MSI manual states that it has an LDT transmitter clock, that controls HT and can only be set Auto, 200, 400, 600 or 800MHz...
So if anyone has a better idea of how it exactly works, please enlighten us all.....
One thing i'm 100% sure of, the memory is controlled by the CPU, not the board

Similar Messages

Question for Bas

sorry if this is posted in the wrong section but I don't know of any other forums that Bas moderates, I downloaded the bios file for kt3 ultra (I'm using winxp) and I can't get into dos and Bas says to make a dos floppy but I don't have a floppy drive, is there some sort of command that I could do to make windows go into dos (I've tried safe mode w/command prompt and the like but nothing) or what about using live update? thanks.

hi
try making it a bootable cdlink

Simple question for bas

or anyone else that may know the answer.
should my bios see the sata drives with the sata controller enabled even before i do the f6 when installing the via raid drivers in the os.
also what jumpers should be shorted on the back the hard drives. i have 2 raptors that im trying to get in raid 0
anyone ?

I have 2 raptors...
Actually i have 4 - 2 on VIA + 2 on Promise..
Erm if your on about you Mobo BIOS.. then no - it wont see them unless you create an array in the VIA or Promise (depending on which you have connected them too) BIOS's - The Raptors come already with the jumpers connected in the correct place for SATA so you wont need to change them.
Just create an Array in the corrosponding BIOS and then that array should show in the mobo BIOS as a bootable device. Then select CD rom bootable in BIOS - chuck the CD in the cd drive - do windows setup - Press f6 when it says "install SCSI or Raid device" then put in the correct Raid adapter driver that you have connected to your HDs too.. then proceed and format your HDs etc and install as norm..
Goodluck
Cheers
Jon

SAPDBA Question for Basis/Security

Guys,We have a possible Audit issue with one of the Auditors next week. He is asking me if there is a "backdoor" entry for a Database person to create a fictious userid via AGR* table and get access to SAP..?
Any inputs appreciated..
Thanks

If you have access to the underlying database, and you know all of the tables that need to have an entry in them, and you have enough time for all this, then yes, I believe that it could be done. The big thing here is, is your underlying database locked down. Meaning, is there a password on accessing the underlying database. If so, then you are pretty safe.
Regards,
Rich Heilman

Cisco 4402 LAP1131 Interference Profile Failed for Base Radio MAC:

Dropped connections every day, few times a day.
WLC Was working perfectly fine for about a year then had some dropped connections.
Upgraded to the latest firmaware and also default it to the factory and reconfigured it.
Same problem!
Cisco 4402
Software Version 7.0.98.0
8x Cisco: AIR-LAP1131AG-A-K9 also v/7.0.98.0
Interference Profile Failed for Base Radio MAC:

This is a threshold parameter: "Interference Profile failed" along with some others. All this does is send alerts to the WLC log, to your syslog or to your WCS/NCS or Prime Infrastructure management tool. You need to adjust these for your environment if you see too many alerts being triggered. Interference can be a main issue in downtown big citites and you would bump the value up to reduce the number of alerts you see. Yes interference will cause issues, but this is an alert threshold and will not fix your interference, just tell you that you have interference due to hitting the X value.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****

How can you change your security question for I tunes?

How can you change your security question for I tunes?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

Question for those with memory issues on k8n neo plat

I have been having issues with my memory on the k8n neo platinum board since i built the system last month and i just recently discovered a fact I had overlooked.
I Have discovered that if i test the system while it is cool (having sat turned off overnight for example), then memtest will pass the ram just fine and the system will be stable for a short period of time, generally longer if no intensive applications are used, ie. doom3 vs. websurfing).
This system, once it heats up ( seems mostly to be the nvidia 3 nb that needs to be "hot"- that is, a probe placed in contact with the module reaches about 58+ degrees c) then the system becomes unstable and memtest, if used, fails.
Prime95, if used on it when its cool, will usually take about an hour or so to fail, but if its used on the system when its been running a bit ( temps from nb at 58c+ and memory module hot to the touch) then it fails after about 20-30 seconds.
I have placed an active hs on the nb in an attempt to correct this, but temps still remain high with failures occuring.
I have spent the better part of three days testing the sytem this way and the above facts have held true in all these tests.
I have tested at stock ratings ( not using "auto" in bios, but using "approved ratings" of 10 x 200 for fsb and timings of 2-3-3-7 for my ram at 1:1 (which is recommended as well) since i am testing for base stability at this point;Voltages have been left at auto settings, however.
I was wondering if anyone else with memory issues could try this out and post if this seems to be the case for you as well.
Perhaps the memory issues on these boards are directly related to a problem with the nvidia 3 chipset running too hot?
Does anyone have a memory issue with these boards who is using water cooling on the NB ?
Lack of issues from people using 'problem" memory, but having no failures with water cooled nb's would support my assumption.

Yes i did mean chipset.
I am using a stock hs/fan from amd, which seems to run a tad hot but, considering that I wont overclock until I can get board stable, its not an issue. (runs 35-40 idle and up to 72 intensive). I need the warranty more then the extra mhz at present.
I removed the stock heatsink from the nvidia chipset and bought a generic chipset cooler (green, very little in the way of fins and seems to be aluminum) with a small fan.
I used a generic silver paste from Compusa to adhere both the cpu hs and the chipset.
I didnt lap either hs, just installed each as per instructions on artic silvers website (figured it had to go on the same way even generic).
I also bought a kingwin thermal center which i ran probes from to the cpu, case, and nb chipset.
I am not using it to adjust fans so those arent connected - its just a reference temp I can see at a glance, esp considering the funky bios reading this boards been known to give.
I assume from these responces that even a nvidia 3 250 chipset shouldnt get as hot as mine?
I asked about that from the retailer i bought this from but he seemed to think it was "ok" at 50ish celcius, but then again he didnt look too confident when he said it, lol.
Idle right now reads on Corecenter at 28 celcius for cpu and 33 celcius for the chipset, although, I have readings of 37 c and 43 c from the kingwin thermal center, which i believe to be more accurate.
My voltage reads at 11.67 for the 12v line at idle right now.
The psu i got is stick from the xblade case i bought in store. (http://www.xoxide.com/xblade2.html)
I have a dvd burner, cd drive, and two maxtor ide hd's attached to the system;The only card is the agp.
Is there a way to check and see if the cpu ispower starved? software monitor or even an external probe perhaps?
I havent put a probe on it, but the ram came in its own heatspreader, which gets very hot to the touch as well.
What temps should I be looking for on these items?

I have a new email address and my old email keeps coming up on icloud when trying to update apps and i don't know the password or security questions for the old email. I can sign in with my apple id which is tied to another email but not itunes how to fix

I have an apple id and it has my current email attached to it. however when i go to update apps it's asking for the password for an old email. I no longer have the old email and can't use it. when I go to icloud on my ipad it asks for the password for old email. it doesn't allow me to change the old email to current. when i go to reset it i can't remember the password or security questions for the old email so it doesn't let me go any further. How do I fix this? Do i need to call apple support?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

I am having trouble answering my old security questions for my itunes account and it is creating a problem because I am not able to purchase apps/songs on my new IPAD. What phone number/email adress should I call to get a quick response to my issue?

I have recently bought an IPAD 2 for my girlfriend and have encountered a problem with purchasing apps through my itunes account. It is requesting that I not only enter my pasword (which I know) but answer my old account questions, which I have forgotten the answers to. It had since locked me out of changing my questions for eight hours. Is there any number I can call to prove that I am the real owner of my itunes account so my girlfriend will be able to use her ipad to purchase new apps without having to go through the trouble of using one of my other apple devices? Random information: I believe my questions were set back in 2007 when I purchased my first ipod nano, since then I have used this same itunes account for my own ipod touch and ipad 2 and my girlfriends iphone 1st generation. I have never run into a problem regarding my questions before on any of these devices

http://www.apple.com/support/itunes/contact/

Can somebody give some real time questions for alv report

hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.

hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column    alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
Using ALV, we can have three types of reports:
   1. Simple Report
   2. Block Report
   3. Hierarchical Sequential Report
<b>Reward useful points</b>
Siva

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

I seem to not enter the correct answers to my security questions for itunes to buy an in-app purchase and also cannot answer the questions exactly like i answered them when creating the account for my ipod, how do i find out what answers i put

I seem to not enter the correct answers to my security questions for itunes to buy an in-app purchase and also cannot answer the questions exactly like i answered them when creating the account for my ipod, how do i find out what answers i put for my ipod touch and itunes?

Try these previous discusssions:
recover answers to security questions: Apple Support Communities
how do i change apple ID security...: Apple Support Communities

I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file can anyone tell me why its not working?

I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file can anyone tell me why its not working?

1) Apple ID: All about Apple ID security questions
Torrifromny wrote:
I want to reset my privacy questions for my apple i.d. But when i request to do so it sends it to a email address that isnt on my file ?
2) See Here. Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
3) Or Email Here > Apple Support iTunes Store Contact

I can't reterive sequerity question for my apple id

i can't reterive sequerity questions for my apple id
<Email Edited by Host>

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97539)

Can anyone help or answer this question for me. Is there a way to have a private album for pictures sent to my phone? Don't exactly want kids ( niece and nephew ) to play on my phone and see private pictures of my girlfriend

Can anyone help or answer this question for me. Is there a way to have a private album for pictures sent to my phone? Don't exactly want kids ( niece and nephew ) to play on my phone and see private pictures of my girlfriend

What about this?
https://itunes.apple.com/ru/app/best-secret-folder/id488030828?l=en&mt=8

Questions for BAS

Similar Messages

Maybe you are looking for