Questions on CMS database

Hi,
I am trying to find out the name of table and column in CMS database (BOXI 3.1) which stores the information about error message received in scheduling (e.g. Cannot initialize Report Engine server. (Error: RWI 00226) ).
I was reading this post /people/ted.ueda/blog/2009/02/23/web-intelligence-xi-3x--reporting-off-the-businessobjects-enterprise-cms-via-data-access-ddk by Ted and looks like the error message is stored in CMS database.
As well as how do i get this from qury bulider like SI_Name or SI_CUID etc. how to get that error message from CMS database.
Thanks,
Nimesh.

Uninstall Apache with the Oracle Universal Installer.
Joel Pérez

Similar Messages

  • How to delete an old SIA node from the CMS database?

    Hello Everyone,
    I had installed XI 3.1 SP3 on RHEL server with CMS database in Oracle. I added an additional SIA node in the same CMS database using "Add Server Intelligence" option in "serverconfig.sh" script. Since I didnot delete the old one before adding a new one, now even though the services run with the new node but the old SIA node with its own central management server is also present. I know this because when I do "./ccm.sh -start all", it starts the old SIA too. So I have to shut down the old sia every time. This has become a sort of nuisance and I wanted to delete the old SIA node. However when I use "serverconfig.sh" script to delete it, it says cannot find the server with that SIA node.
    Looks like the old SIA nod is still registered in the CMS database but the server config.sh cannot find it. How can I get rid or the old SIA gracefully.
    Please help.
    Regards.

    Thanks Danis one more time.
    Yes, I know the name of the SIA. Good to know that creating an additional SIA with the same name and deleting it would do the trick. However, since the old SIA with the same name is still hanging around there, will it allow me to create an new one with the same name?
    Also, I have seen almost always adding a new SIA renders the existing ones non-usable and non-deletable (without using the work around). My reservation at this point is that, won't just adding an additional SIA though with an old name make the existing SIA running all the services unusable?
    I apologize for all the questions. Since it is the production environment I will be working on, I have very little luxury of first trying it out and asking the questions. We just want all the points covered before proceeding.
    I would very much appreciate your inputs.
    Thank you.

  • How to install CMS database on Sql Server

    Hi
    Now I am installing Crystal Reports Server 2008, current environment is windows server 2003 + Sql Server 2005.
    During the installing, because I want to use Sql Server 2005, so I picked "use a existing database server", however when I get into "select existing cms database" step, and selected "Sql Server(ODBC)" there is nothing show on the ODBC(DSN) list, I have already create a new ODBC on Data Sources(ODBC),  when I click "browse" I can not find any data source, so that is mean I have to install a new mysql database in my server, but I don't want to, I just want to use the Sql Server, could you tell me why or how to do it?
    Thanks in advance.

    If you select SQL Server as your CMS database make sure that the datasource you created is a Machine DSN and not a User DSN.  Make sure that you have created a blank SQL Server database and have your Machine DSN point to it.
    I hope that helps

  • Question about import database pk, fk

    Hi
    I want to ask a question about imported database. I imported database and I noticed tables doesnt have Primary key or foreign key. They havent relation between eachs. Why can this occured ?
    is it about import or another something?

    yeah ı am surprised none of tables have pk or fk ..
    but ı want to show you http://i51.tinypic.com/2hedc9d.jpg
    what is blue shapes in there ?
    can be foerign keys ?

  • ASAP Question and Answers Database for Retail

    Hi experts,
    Does anyone have a ASAP Question an Answers Database for Retail?
    Thanks in advance,
    SN

    Hello Ayşe,
    I hope this document which we just published in the BPX Archive provides a useful guideline onto your question.
    [Question Catalogue for Student Lifecycle Management Business Process Mapping 2009|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/808f676c-56d0-2c10-a0a3-e5e9e3ba0012]
    Regards,
    Tina

  • BO 4.1 SP04 Installation on Linux - Changing CMS Database to HANA

    Hi All,
    Greetings!!
    We are planning to install BO 4.1 SP04 on SUSE Linux 11.0 SP03. And we are going to fetch data directly from ECC (HANA Database), so no BW in place.
    During BO installaiton we will go with the default database Sybase SQL Anywhere for CMS and audit storage but later on we will export the data to HANA Database which is our prime aim.
    Can you please help us with the procedure for doing the same in Linux environment (Changing the CMS database from SQL Anywhere to HANA) and also the is there any other pre-requisites should be done to for fetching the data directly from HANA without the usage of BW.
    Looking forward for your suggestions & solutions for the same...
    NOTE : Our HANA Version is 1.0 SP07 Rev 73 & planned BO verison is 4.1 SP04
    Regards,
    Ela

    Symptom
    Unable to install SAP BusinessObjects Business Intelligence 4.1 on Red Hat Enterprise Linux 6.4.
    Error:"Failed: Operating system patch level (Critical), Information: Missing patch: libXext-devel-1.1-3.el6.i686, Missing patch: libXext-devel-1.1-3.el6.x86_64".
    Environment
    SAP BusinessObjects Business Intelligence 4.1
    Red Hat Enterprise Linux 6.4
    Reproducing the Issue
    Launch the installer of SAP BusinessObjects Business Intelligence 4.1 on a Red Hat Enterprise Linux 6.4 server.
    Cause
    The following Operating system packages are missing:
    libXext-devel-1.1-3.el6.i686
    libXext-devel-1.1-3.el6.x86_64
    Resolution
    Install both packages from the Red Hat installation CD or use a package-management utility such as Yum for Linux operating systems.

  • Issues installing BO XI R 3.0 - Can't get passed CMS Database Information

    I can't get passed the CMS Database Information window from the install:
    I'm choosing an existing CMS database via Oracle.  This CMS is also being used on a different server, is this an issue?  I'm trying to do a side-by-side installation of which I chose a different directory.  For the CMS port I chose 6500, since my other install of BO XI Release 2.0 CMS is using 6400. 
    I'm getting Assert Failure's in the Trace_dbcheck.log:
    Timestamp     ProcessID     ThreadID     Message
    [Mon Aug 04 14:30:58 2008]     5212     8160     trace message: findDFA_LLR: [CmdLineDir] Y:\BO XI R3\package\dbcheck
    sqlrule.llr
    [Mon Aug 04 14:30:58 2008]     5212     8160     trace message: Loading: database subsystem only
    [Mon Aug 04 14:30:59 2008]     5212     8160     trace message: loading libary succeeded
    [Mon Aug 04 14:30:59 2008]     5212     8160     trace message: DatabaseSubsystem::Init()
    [Mon Aug 04 14:30:59 2008]     5212     8160     (d:\titan_rtm\src\framework\libs\cpp\dbwrapper\oracle\OracleXPlatWTF.h:94): trace message: Loading Oracle libclntsh client library.
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\wireobinit.cpp:96): trace message: Creating the shared CWireObject::PropertyNameMap
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\wireobinit.cpp:118): trace message: Setting static property map
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\wireobinit.cpp:125): trace message:  CWireObject::InitializeStaticPropertyMap() - reference count: 1
    [Mon Aug 04 14:30:59 2008]     5212     8160     trace message: initializing subsystem succeeded
    [Mon Aug 04 14:30:59 2008]     5212     8160     trace message: Loading: done loading subsystem - database subsystem only
    [Mon Aug 04 14:30:59 2008]     5212     8160     trace message: DatabaseSubsystem::Connect()
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\DBConnectionManager.cpp:802): trace message: DBConnectionManager - Setting total target number of connections for pool 0 to 1.
    [Mon Aug 04 14:30:59 2008]     5212     8160     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\dbutils.cpp:820): trace message: Caught Unknown Error: Internal error: An unknown exception has occurred.
    [Mon Aug 04 14:30:59 2008]     5212     8160     trace message: DatabaseSubsystem::Shutdown()
    [Mon Aug 04 14:30:59 2008]     5212     8160     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\DBConnectionManager.cpp:719): trace message: Database error while shutting down database: Programmer error. Check ASSERT log.
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\wireobinit.cpp:175): trace message: CWireObject::TerminateStaticPropertyMap() - reference count: 1
    [Mon Aug 04 14:30:59 2008]     5212     8160     (.\wireobinit.cpp:182): trace message: Releasing static property map

    Hi Tony,
    I did try to create a new SIA with the default servers, and I got the following error:
    Central Configuration Manager:
    Internal error: An unknown exception has occurred.
    In the SvcMgr_20080806_163542_4124.log I got the same error I've been getting from the beginning:
    [Wed Aug 06 16:37:59 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:37:59 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:38:11 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:38:11 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:38:18 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:38:18 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:38:57 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:38:57 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:40:56 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:40:56 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:44:21 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:44:57 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:45:56 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:45:56 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:46:04 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 16:46:04 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 18:44:09 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    [Wed Aug 06 18:44:09 2008]     4124     2360     assert failure: (.\OracleDatabase.cpp:117). (0 : Programmer error: OCI_INVALID_HANDLE).
    I just noticed the boe_upgrade_output.xml file that all the directories show the path to my original Business Objects XI R2, when I specified a different directory.  Just a little confused by this.

  • SQL mirroring for CMS database

    I don't think SQL mirroring for CMS database is supported. anybody has any information onthis?

    This is error ...
    Database-level error reported by JDBC driver while executing statement 'UPDATE
    CLIARC SET CLICL3 = 0 WHERE clicl1 = 10'. The JDBC driver returned the following error message: 'java.sql.SQLException: CLIARC en PROXL07 de tipo *FILE no encontrado. Causa . . . . . : CLIARC en PROXL07 tipo *FILE no se ha encontrado. Si se trata de una sentencia ALTER TABLE y el tipo es *N, no se ha encontrado una restricción o partición. Si no se trata de una sentencia ALTER TABLE y el tipo es *N, no se ha encontrado una función, procedimiento o desencadenante. Si no se ha encontrado una función, CLIARC es el programa de servicio que contiene la función. La función no se encontrará si el nombre externo y el nombre de uso no coinciden exactamente. Examine en las anotaciones de trabajo para ver si encuentra un mensaje que dé más detalles sobre el nombre de función que se está buscando y el nombre que no coincide. Recuperación . : Cambie el nombre y vuelva a intentar la petición. Si el objeto es un grupo de nodos, asegúrese de que el producto DB2 Multisystem está instalado en el sistema y cree un grupo de nodos con el mandato CL CRTNODGRP. Si no se ha encontrado la función externa, asegúrese de que las mayúsculas y minúsculas del EXTERNAL NAME en la sentencia CREATE FUNCTION coinciden exactamente con las mayúsculas y minúsculas del nombre exportado por el programa de servicio.'. For details, contact your database server vendor. 
    The sentences in using are following:
    Query Sql Statement: select clicl2  from proxl.cliarc where clicl1 = 10
    Update Sql Statement: UPDATE CLIARC SET CLICL3 = 0  WHERE clicl1 = 10
    Tks for your help anybody

  • Command line to reinitialize cms database in windows

    Post Author: sptong
    CA Forum: Administration
    Pls adv if there is any command line that I can use to reinitialize the BOE cms database in windows ?
    I wish to automate the housekeep process to clear away all the previously created folders/report-objects in InfoView. Is there anyone with any ready to use scripts or steps to show how it can be done ?
    I am running BOE XIR2 in Windows 2003 server. CMS used Oracle 9.2 as database.
    Thanks/Rgds

    Post Author: sptong
    CA Forum: Administration
    TAZ:
    Hi Sptong,
    Reinitializing the CMS DB will effectively delete everything, folders, users, groups, and you will be left with a new install basically.
    Is that what you want to do? I can't see how this could possibly be a maintainence task?
    There is no command line way to do this. If that is what you want to do... Then from the CCM you can stop the CMS, right click properties, go to the tab with the connection info on it and modify the connection. There you will see 3 options 1 which will reinitialize the CMS DB. Remember to most customers this would constitute a production down and 100% loss of data. I'd back up your DB first.
    Regards,
    Tim
    Yes. That is basically what I wanted.
    For our application, we do not published the report into InfoView. We used the InfoView scheduling facility to 'generate a final PDF file' to a report repository. We store the reports else where. Hence, the InfoView folders will get messy after some period. Hence, we need to housekeep the folders by deleting everything, leaving a new install basically.
    We know the manual steps. Just wonder if there are some command line / scripts that we could use to automate the process.

  • Moving CMS database from one server to another

    Using the following:
    Crystal Enterprise 10, installed on W2K3 Server R2 (not making any changes to this server);
    CMS database, installed on W2K Server, SQL Server 2000, SP3
    New database server: W2K3 Server R2, SQL Server 2005, SP2
    I found what I think are the steps to moving the database from one place to another in the CE10 Administrator's guide (pages 291-300, but I want to make sure there aren't any "gotchas" when moving the database location and/or upgrading the database version.  I'm primarily a DBA, so I already know about the Schema security change going from SQL 2000 to SQL 2005.
    In a nutshell, here's my plan:
    1. Take fresh backup of the existing CMS database
    2. Stop Crystal Management Server
    3. Click "Specify CMS Data Source" on the toolbar.
    4. ETC--following the steps in the admin guide
    If anyone has done this and has run into any problems (what I'm expecting) or had it go smoothly (I would be surprised), please let me know what to expect.
    Thanks!

    All you really need to do is stop the crystal services.
    Backup the CMS and Auditing database
    Detach the CMS and Auditing database
    Copy CMS and Auditing databases to new DB server
    Attach the CMS and Auditing databases
    Set the compatibility mode
    On the servers/s that host the CMS service, modify the ODBC connections to point to the new database server
    Start the CMS service, fire up the Crystal services.
    One thing to note, I don't think SQL 2005 is a supported platform for CE10 - this doesn't mean it won't work and since the support lifecycle for the product is long gone it doesn't really make much difference however you may want to run some thorough testing prior to the move.
    Edited by: James Pretorius (CCLTD) on Aug 5, 2009 9:20 PM

  • Keeping CMS database and FRS backups in synch

    I am in the process of upgrading to BOE XI R3.1 from CE 10 and am looking at our backup and recover plan.
    We are planning on implementing 2 BOE Xi R3.1 servers with a clustered CMS.  Our CMS database will be running on a remote SQL Server (2005) farm that will be immediately replicated to our secondary site using SRDF.
    The FRS will be local to each BOE XI R3.1 server.  We are thinking of immediately replicating the FRS from the primary location to the secondary location using DFS but I worry about the FRS and the CMS possibly being out of synch when we try to restore.
    By trying to have backups up to the latest instant am I looking for trouble?  if this is manageable, am I going about it the right way?
    In our CE 10 deployment we have a CMS database backup at midnight and the FRS is Robocopied at 12:15.  I'm just looking to improve upon this.
    Thanks

    Right both BOE servers will point to the FRS on the primary BOE server and the primary CMS database on the SQL server farm.  Then we replicate the primary FRS to the secondary FRS located on the secondary BOE server and the primary CMS database to the secondary CMS database both on the SQL Server farm.
    If we need to we'll switch the primary and secondary BOE servers to the secondary FRS (located on the secondary BOE server) and the secondary CMS database on the farm.
    I guess what I'm looking for is the best practice for the backup.  I think what I'm hearing is the best route to go is to have the backups as often as you want but the best way to ensure that the backups are in synch is to do them when the CMS and FRS servers are down.  Otherwise they could be out of synch with report requests being executed at the same time.
    Right?
    Thanks again

  • Cannot log onto MySQL CMS Database after network installation

    Post Author: matthewh
    CA Forum: Authentication
    I've just installed Crystal Server XI R2 on a brand new server running MySQL 5.0.45 but when the installation completes it says it can't log on to the CMS database.  It's created the empty database and I have the db.opt file in there but nothing else - no tables or anything.   I've re-run the installation and done a repair and Modify but with no change.  The CMS user has full rights to the MySQL instance for now, so it shouldn't have been an issue.  Is there a SQL script available I can run to build the initial db manually?  Do I need to uninstall and go through it all again?  took over 2 hours across the network and the server is in another part of the country.

    Post Author: TAZ
    CA Forum: Authentication
    Hi Matthew,
    I'm not sure why you cannot access your mysql DB but you do not have to reinstall.
    Launch the CCM(central configuration manager) If the CMS is not stopped then stop it.
    double-click on the CMS choose configuration, choose specify, choose recreate the current data source.
    This will reinitialize the CMS DB if the account configured has the proper permissions. It should be a DB owner
    Regards,
    Tim

  • CMS tries to start before Oracle service - therefore cannot contact its CMS database

    Post Author: patrickcoote
    CA Forum: Deployment
    HelloI have a windows XP sp 2 machineOracle 9i installedCrystal Server XI Rel 2 (evaluation copy)My problem is that the Central Management Server (CMS) is starting up before the OracleService that the CMS database is installed on.  Therefore CMS cannot start automatically and any of the jobservers etc cannot register with CMS.In event viewer i get this:"The root server reported an error Initialization Failure. (Reason: Unable to connect to the database using the provided connection string. Reason: ORA-01033: ORACLE initialization or shutdown in progress)."When the PC boots up fully I can go into Central Configuration Manager and start CMS manually and access all of its features with no problems.I looked at this sitehttp://www.microsoft.com/technet/sysinternals/SystemInformation/LoadOrder.mspxThe program here lists processes in their startup order and I can see from there that CMS and the other Crystal services are started before the Oracle services, for example
    BOBJCentralMS starts before OracleServiceBW (alphabetical order)In CCM, on the Dependancy tab for CMS (and all other CR servers) I have added :OracleServiceBWOracleMTSRecoveryServiceOracleOraHome92TNSListenerOracleOraHome92Agent(I thought that maybe this would tell CMS to wait for these to start before starting itself )But still get the same error(s)I can provide any more info if needed.Best regardsCootser

    Post Author: patrickcoote
    CA Forum: Deployment
    I have used Regedit.exe, regedt32.exe and Crystal Central Config manager, all of which aloow you edit the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BOBJCentralMS\DependOnServiceWhichever way I've loaded in the oracle services to that key (binary) has made no impact.The oracle services start after Crystal and the problem remains.What I have decided to do is use a batch file (see below) to start the services when the machine boots upThis way I know they will start, and it does not take too long
    echo Starting Business Objects Services...
    rem net stop  BOBJCentralMS
    net start BOBJCentralMS
    echo off
    rem Stop and then (Re)Start all other BOBJ services
    net stop  BOBJCrystalReportApplicationServer
    net start BOBJCrystalReportApplicationServer
    net stop  BOBJCrystalReportscacheServer
    net start BOBJCrystalReportsCacheServer
    net stop  BOBJCrystalReportsPageServer
    net start BOBJCrystalReportsPageServer
    net stop  BOBJDestinationServer
    net start BOBJDestinationServer
    net stop  BOBJEventServer
    net start BOBJEventServer
    net stop  BOBJInputFileServer
    net start BOBJInputFileServer
    net stop  BOBJOutputFileServer
    net start BOBJOutputFileServer
    net stop  BOBJProcessServer
    net start BOBJProcessServer
    net stop  BOBJProgramServer
    net start BOBJProgramServer
    net stop  BOBJTomcat
    net start BOBJTomcat
    echo .
    echo Business objects services started.
    Pause**************************************************************************************************************************

  • Create CMS databases

    Dear,
    recently we migrated Lync 2010 to 2013 and made 5 central sites in lync 2013
    now we planning for move CMS databases from 2010 to 2013 lync, we have separate SQL server cluster for both lync 2010 and lync 2013,
    Q. to create CMS database I need to run following command on each front end lync 2013 server or only for backend SQL server which is in cluster , then use
    Move-CsManagementServer: to move CMS
    Install-CsDatabase -CentralManagementDatabase -SQLServerFQDN <FQDN of SQL Server> -SQLInstanceName <name of instance  >

    Hi,
    Before move CMS to Lync Server 2013,
    for Lync Server 2013 Enterprise Edition, you need to create the new Central Management store in the Lync Server 2013 SQL Server database by the following Lync Server Management Shell:
    Install-CsDatabase -CentralManagementDatabase -SQLServerFQDN <FQDN of your SQL Server> -SQLInstanceName <name of instance>
    For Lync Server 2013 Standard Edition, you need to Prepare first Standard Edition server and then create the new Central Management store on the Lync Server 2013 Standard Edition Front End Server, in the Lync Server Management Shell, type:
    Install-CsDatabase -CentralManagementDatabase -SQLServerFQDN <FQDN of your Standard Edition Server> -SQLInstanceName <name of instance - RTC by default>
    Then you can move the CMS from Lync Server 2010 to Lync Server 2013 Pool.
    More details:
    https://technet.microsoft.com/en-us/library/jj688013.aspx
    What’s more, in Lync Server 2013, it is not supported SQL clustering topology any more, for Back End Server high availability, SQL mirroring is the recommended and supported option.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Need to fetch the data from CMS database

    Hi All,
    I'm using BO XI 3.1 SP2 and looking for below data to retrieve:
    1. I would like to pull the data for universe as below and here my parameter would be my Universe name
    Groups
    Reports
    Groups: which are having access to that universe?
    Reports: Reports which are builds using that Universe
    2. Also the below data is required for the universe is:
    List of Users those are having access to universe. User active is user's status enabled or disabled. And last column is whether user is having permissions to edit the data provider or not.
    User ID
    User Name
    User Group
    User Active
    Data Provide Edit
    Please let me know how I could fetch this data from CMS database.
    Thank you..!!

    There is a spreadsheet in BOB forum under download that extracts the users and groups, etc fromt he CMS database.
    You can customize it to get the universes and reports.
    User ID - yes available
    User Name  - yes Available
    User Group - yes available
    User Active - yes available
    Data Provide Edit - I didn't see it in that spreadsheet but I am sure you can find it.

Maybe you are looking for

  • Quicktime codec does not work, internet explorer just shuts down!

    I have reinstalled quicktime many times and still I cannot view any videos or movie previews on internet explorer that use the quicktime plugin. When I open the page that is supposed to use the plupin, a window pops up saying I should install the Act

  • Can't sync photos with Adobe Elements 6.0

    Hi I am unable to sync my photographs to the iPod using Adobe Elements 6.0 The albums are not showing up in iTunes. I read somewhere that it may work if the photos are in "collections" & not Albums but I can't work out how to do this. The iTunes help

  • Report Painter Query (FI)

    Can you suggest me a table for report painter where we have field mentioned below on the selection screen. Controlling area Reporting Year Reporting Month Comparison Year Comparison Month Chart of Accounts Currency Ledger Cost Center Functional Area

  • Implications of not using mandt field in SAP table.

    Hi Everyone, Can anybody please let me know the diadvantage and the impact of not using the mandt field at the key field in the db table. And what will be the impact if the customer upgrades the system and if the tables doesnt have this field. Any he

  • Front video camera is not working on my iPad4.

    Just recently noticed my front video camera not working when I tried to facetime with a friend.  They cannot see me, and a blank square comes up as our picture.  When I open facetime the screen is just black.  If I open the camera, then switch to vid