Questions on Install [install and makeselectable]

Hi!
I have uploaded a load file to my card.
The AID of the package is A0 00 00 00 62 03 01 0C 01.
The AID of the applet is A0 00 00 00 62 03 01 0C 01 01.
Then I tried to install the application and make it selectable.
The application AID I used is A0 00 00 00 62 03 01 0C 01 02.
So I sent the APDU to the card as follows:
80 E6 0C 00 24 09 A0 00 00 00 62 03 01 0C 01 0A A0 00 00 00 62 03 01 0C 01 01 0A A0 00 00 00 62 03 01 0C 01 02 01 04 00 00 01
But the respose is 6A 80,which means incorrect data.
Can anyone help me to find where the incorrect data is ?
Thanks!

What card do you have there? Is it supporting Install[for install and make selectable]? If this command is supported, I see three possible reasons:
- Install parameter tag C9 is missing (LTL '02C900')
- Install Token is not supported (length set to '01' ?)
- Default selected indicated, but another applet is already default selected

Similar Messages

Reinstalling AE and PP due to an error with dynamic link. Where do i find the program install? And tips on how to reinstall without messing things up? last question is, does my recent files and saves work after the reinstall?

I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
Where do i find the program install?
And tips on how to reinstall without messing things up?
last question is, does my recent files and saves work after the reinstall?
Thank you

karianne wrote:
I have allready bought the programs, but need to reinstall AE and PP due to an error with dynamic link.
Where do i find the program install?
Which versions? Which operating system?
Try Download and Installation Help

Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this a factor?

Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?

Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.

When i make internet recovery i see question mark after install and reboot. Why?

When i make internet recovery on clear HDD's with created striped software RIDE 0 with two HDD in mac mini.
I see question mark after install and reboot. Why?

Make a "Genius" appointment at an Apple Store to have the machine tested. Back up all data before you go.

Hello again, I'm still learning about my imac so here I go with latest question- I've installed word 2011 and would like to know how to email the document I have just written straight to a recipient but can't seem to find how to do this. Please advise

Hello again, I'm still learning about my imac so here I go with latest question- I've installed word 2011 and would like to know how to email the document I have just written straight to a recipient but can't seem to find how to do this. Please advise in simple terms
Also how do I save to a file.
Thank you clever world!!

To save you file click the disc icon in the tool bar or file save as:
To email the Word document to someone compose a new message and click the paper clip to attach the Document.

COPY INSTALL DISK AND DL QUESTIONS

OK, I want to make a backup of the Leopard install disk and I understand it's a dual layer DVD. I'm assuming Disk Utility can burn a bootable DL disk? Is there anything special that needs to be done because it's DL and needs to be bootable?
Also, I'll probably have to buy a package of 3 so what do I do with the other 2? Can I burn data backups on them with no problem and be able to red them like a standard DVD?
I'm assuming yes on all that but thought I'd check before spending the money.
Is there a way to put the install disk on an external drive then boot up from the external and install Leopard from there?

Went out to get some dual layer DVD's and all Staples had was a 25 pack for $53, WAY more than I wanted to spend and I sure don't need 25 of them. So I went back to do an internet search for cheaper DVD's and found an interesting article on cloning the Install DVD to an external firewire drive.
I have an external USB2 drive but my iMac is supposed to be able to boot on that. I used Disk Utilities to add a partition without erasing the one that was there (I love that!). I then used restore in Disk Utilities and selected the disk image I had created and cloned it to the small partition on the USB2 drive.
I then used System Preferences Startup Disk to select it and restarted. Didn't do an install because I didn't need one but did Repair Permission and Disk Repair. All went perfectly, but MUCH faster than booting from the DVD. This can be really handy.

Test questions/ dumps for 1Z0-233 (11i install, patching and maintain apps)

Dear All
Does any one have test quesitons / dumps / samples for 1Z0-233 (11i install, patching and maintain apps)
regards

Hi All,
I'm already an OCP in 8i, 9i and 10g. I wanna take 1Z0-233 exam.
I cam to know that one who is certified in 9i or 10g can directly write 1Z0-233 exam without attending any Oracle Official training courses for the same.
Please clarify my doubt, as I'm gonna appear 1Z0-233 exam shortly.
Let me know if any information on this.
Thanks in advance.
Regards,
SYED.

HT204053 Apple offered to install iCloud, and I allowed it. Yet when I try to sign in to iCloud using my Apple ID email and pswrd--an ID that I've been using for YEARS--I'm given the message, "This Apple ID is valid but is not an iCloud account." What is

To repeat my question, Apple offered to install iCloud, and I allowed it. Yet when I try to sign in to iCloud using my Apple ID email and pswrd--an ID that I've been using for YEARS--I'm given the message, "This Apple ID is valid but is not an iCloud account." What is going on?
Everywhere I search on Apple's Support site says to sign in to iCloud using your "Apple ID," which I did. I've had my iTunes account for years (even migrated from the old AOL account system). It's the standard email+password that everyone is supposed to use.
My main question is how can I have a valid Apple ID and not an iCloud account--if the two are supposed to be linked?
Thank you for any help you can give me!
tlj

I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish

Installing Mountain Lion from Snow Leopard, Install failed and HD write-locked

I recently downloaded the mountain lion installer from the App Store and I ran the installer. Stupid person as I am, I did not have any backups for my file and I naively assumed that an apple OS installer would be without flaws. Boy, was I wrong. I need every bytes of my data (or close to every bytes) but the installer failed.
Mid installation, the installer stopped and said that the installation failed and that I need to repair my disk. So I restarted the computer and I ran disk utilities (my start up disk was the OS installer and the installer allows me to run several programs, including terminal, disk utilities, and by the way, when I held option while starting up to see which start up disks I have, I only had the OS installer as the start up disk. Also, the installer allows me to run a program called "Startup Disk" when I click on the apple logo on the top left corner, but it doesn't allow me to startup my computer using Macintosh HD) and noticed that when I highlighted Macintosh HD, my "Repair Disk" button was grayed out. So first things first, I ran the "Verify Disk" button but after a minute or so, Disk Utilities said that verification failed and that Macintosh HD needs to be repaired. But the "repair disk" button is grayed out! So I went to the Mountain Lion installer again and ran it. Of course, it failed again so I restarted the computer.
So I tried to first back up all files in Macintosh HD to an external hard drive using Disk Utilities, and I used features such as "New Image" and "Restore" but they both ended up in "Input/Output error". I tried many methods with Disk Utilities but they resulted in errors.
After some research, I noticed that some people's computers worked after they reset their PRAM. So that's what I did. I held command+option+P+R when computer started up and I reset the PRAM. When the start up disk (which is the OS installer, not the normal operating system) loaded, I was greeted with choose languages option and then I was back in the Mountain Lion installer state. I again ran the installer again, hoping something would be different, but then it was different. But not in a good way. When I was told to choose where I would like to install Mountain Lion, I noticed that Macintosh HD was grayed out. Last time, I was at least able to run the installer but this time, Macintosh HD was grayed out. The installer said that my Macintosh HD was locked. After some research, I learned that apparently, the Mountain Lion installer write-locks Macintosh HD mid installation.
So now I am stuck and I am thinking of two things (plus some questions)
1. I am wondering if there is a way to unlock Macintosh HD. But even if I can unlock Macintosh HD, there is no guarantee that the installer will successfully install Mountain Lion, am I right?
a. so how can I un-write-lock Macintosh HD?
2. More realistically, I am thinking of borrowing someone else's macintosh computer and use it as the backup center. I have a firewire cable and a terrabyte external hard drive. So what I'm thinking is that I'll hook my computer in target mode to my friend's computer and I will also plug in my external hard drive to my friend's computer and then I can download and run Carbon Copy Cloner from my friend's computer to copy all data from my Macintosh HD to my external hard drive. And then I will erase my Macintosh HD, freshly install Mountain Lion onto it and then copy all data back from my external hard drive. But I am not sure about few things.
a. it looks like my Macintosh HD is write-locked. Can I still use Carbon Copy Cloner to copy all data from Macintosh HD (in target mode) to my external hard drive?
b. will my computer allow me to erase (or format) Macintosh HD?
c. will my erased/formatted Macintosh HD able to install + be installed Mountain Lion OS?
If you are here, then you have read my long long problem. Thank you very much and I would really really really appreciate your answers and opinions. Thanks

I'm not sure where you read that about the disk being "write-locked." That doesn't make much sense, given that the major task an installer like this must achieve is writing a whole bunch of files to the hard drive. I think your source was mistaken.
As to what happened, it sounds like your hard drive was badly corrupt to start with, or possibly was on the edge of failing and is now in the process of dying entirely. If you don't have backups of your data, that does not bode well for you, unfortunately. If you can manage to use target mode to copy your data, do that.
Once you're sure you've got all your data, you need to start up from your Snow Leopard install disk and repair the hard drive. (Since it sounds like the Mountain Lion installer didn't work, I wouldn't trust the recovery partition that Mountain Lion installs.) Or, even better, just erase the hard drive entirely and reinstall Snow Leopard. Then, once you're back up and running, with all your data back on the system and with Snow Leopard updated to the most recent version, try installing Mountain Lion again. If any of that fails again, the problem is likely to be a dying hard drive, and you'll need to replace it.

How can I tell if Adobe Flash is installed properly and upto date version?

How can I tell if Adobe Flash is installed properly and upto date version?
Hi Guys and girls, hopefully an easy question for you.
I installed Adobe flash and lightsource last night, cos I needed it to run Weebly website maker.
Anyone know if Weebly runs correctly on 10.9.1??
I have a new comp, so no previous version of flash on here, I am running OSX 10.9.1
I just want to know How I can tell if Adobe Flash is installed properly and is the upto date version?
Where do I go in the comp to find out,
If I type in Adobe flash into search it only brings up flash manager, when I click this it is an uninstaller program.
Lightsource shows in finder apps.
If I type in flash player it shows up in plugins with a version number see screen shot.
Where would I go to check for updates for things like flash on my comp?
Thanks Team,
Jason in oz. :?):)

1. Safari > Preferences > Security > Internet Plug-ins
Allow Plug-ins
2. Go to this Adobe site to check. You will see the animation above the tree.
How to know whether AdobeFlash Player is installed
http://helpx.adobe.com/flash-player.html?promoid=ISMRY

I had the same UEFI partions after installing Ubuntu, and the Diskpart suggestion didn't work!

I have a system with a 128 GB SSD, and a WD15EARS drive. I was hoping to install Windows 8.1 PRO on a 90 Gig partition and the 64 bit version of Ubuntu 14.04 on the 30 Gig partition, and put all of the data and apps on the Western Digital Drive. This is
a brand new system using a Gigabyte B85M-D3H motherboard, 8 Gig Kingston HyperX 1600 Mhz RAM, and an i3-4330 3.5 GHz processor. My BIOS is set to UEFI and Legacy setting by default. I had previously had Windows 8.1 PRO and Ubuntu 14.04 working in a dual boot
configuration but found out I was running the 32 bit version.
I got rid of Ubuntu 32 bit by deleting the partition it was installed on and cleaning up with the Disk Manager from Windows. I created NTFS volumes on the affected partitions and downloaded the 64 bit version of the Ubuntu 14.04 .iso! The first time I tried
to burn a disk, it wasn't bootable, so I downloaded Imgburn and created a bootable CD. I ran the TRY 1st, but when I chose install the program did not recognized that Windows 8.1 Pro was previously installed. It wanted to install to the 90 Gig partition on
my SSD drive (which is where Windows 8.1 PRO) was installed. I manually redirected the install to the Western Digital Drive and the install proceeded until completion.
It was obvious that since Ubuntu did not recognize the previous install of Windows, the Computer rebooted into Ubuntu. This is almost identical to another situation listed.
The solution given was to open an administrative command line and issue the following:
DISKPART
RESCAN
LIST DISK
SELECT DISK #
LIST PARTITION
SELECT PARTITION x
DELETE PARTITION OVERRIDE ; and I received the following
Virtual disk service error; Delete is not allowed on the Current Boot, System, Pagefile, Crashdump, or Hybernation Volume.
is there any tool that wil wipe partitions no matter what?

Hi,
The reason why you encountered this error is that the partition you wanted to delete is "system" partition, marked as "Active", it contains files to boot into system, so you can't delete it with the command.
And here're some useful links about dual boot Windows 8/8.1 and Ubuntu.
http://askubuntu.com/questions/221835/installing-ubuntu-on-a-pre-installed-windows-8-64-bit-system-uefi-supported
http://itsfoss.com/install-ubuntu-1404-dual-boot-mode-windows-8-81-uefi/
NOTE
This response contains a reference to a third party World
Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft does not control these sites and has not tested any software or information found
on these sites.
Yolanda Zhu
TechNet Community Support

The desktop on which I had Lightroom and PhotoshopCC installed failed and I no longer have access to it. How do I deactivate the software on those machines so that I can reinstall it on my new Mac?

Question: The desktop on which I had Lightroom and PhotoshopCC installed failed and I no longer have access to it. How do I deactivate the software on those machines so that I can reinstall it on my new Mac?

Absolutely - but I had no idea there were two versions. When I got my new laptop I just went to the Adobe site to download and install LR5. It never asked if I had a license; it just directed me to install CC to start a trial which I thought I could license after downloading. Several sessions and many hours of looking through the forums and Google for an answer I never ran across anything that made this distinction. I still haven't found a path from www.adobe.com that would get me to the standalone download page (it's probably there, wasn't obvious to me) and looking at the download page it doesn't make any CC/standalone distinction.
There are many places I could have gotten a hint - for instance the license could be tagged "stand alone edition", the CC-version could recognize the stand-alone key and either accept it or produce a more meaningful error message, or the download site or the CC app could ask if I had previously purchased a key, etc.
It was my error to assume this was a deactivation problem, but it looked the same as a previous deactivation problem with Photoshop.
In any event, thank you for your help.

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Paragraphs help the reader, just saying.
What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
It makes no difference at all.
How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
You can export while writing the metadata to the file in most cases.
Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size.
HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
You're somewhat confused and you need to
1. Decide what exactly you want to do
2. Then go about it.
If I understand you correctly - and there's no guarantee that I do - the easiest thing is to bring all your Photos into iPhoto and do everything from there.
You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
Regards
TD

How do you un-install Lion and go back to Leopard?

How do I un-install Lion and return to Leopard?

I believe you mean to return to Snow Leopard:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

How to install servlet and jsp on win xp?

I am new in jsp and servlets. I would like to follow some jsp books and examples. The j2eesdk-1_4-dr-windows-eval.exe is already installed on my computer. I can write and run java codes. I downloaded the jsp-2_1-edr-api.zip file from http://java.sun.com. I extracted and moved to dir:\Sun\AppServer\ folder. When I search, I cannot see any jsp.jar file as some documents say, nor servlet.jar. How can I install jsp and servlet on windows xp? Any help? I will be very grateful.

For starters, you would probably have better luck getting an answer on the general Java forums, since this a very general question- it is hard to see how this is specific to the Web Application Framework technology, except of course that it uses JSP and servlets naturally,
But to try to help you here, more information is needed: from exactly where are you do\wnloading the file jsp-2_1-edr-api.zip and what is the product title of this file? I ask this since a general search of sun.com returns no evidence of the existence of this file.
Also, what documents are being referred to here?
Thanks

How to install ORAESB and ORAWSM schema

I installed oracle database 10.2. I'm not clear as to how to install ORAESB and ORAWSM schemas which are required for SOA Suite 10.1.3 installation.

Please ignore the previous question. I've located the soa_schema directory.

Questions on Install [install and makeselectable]

Similar Messages

Maybe you are looking for