Questions on recording multiple mics at once

Does garage band 3 support recording x amount of mics at once to their own track provided the correct firewire hardware is used?
Example can I record a kick, snare, and 2 over head mics all at once and then go back an edit what each mic recorded or will it all be mixed down into one track?

http://www.bulletsandbones.com/GB/GBFAQ.html#maxtracks

Similar Messages

Trying to record multiple tracks at once with Mixer (Two Microphones)

I have a Alesis Multimix 4, and two microphones plugged into the mic 1 and mic two inputs. I am trying to record both, at the same time, to two distinct tracks. I set Device Class to ASIO in the Audio Hardware section, and delected ASIO4ALL v2 for the Device. My mixer (I assume) is showing up as USB Aduio CODEC in the ASIO4ALL settings. When I go back to my multitrack setting, I am given four options for incoming audio:
Audio Front Mic Input 1
Audio Front Mic Input 2
USB Audio CODEC 1
USB Audio Codec 2
No matter what combination I try, when I record, both tracks pick up both microphones. My goal is to isolate both, so I can apply different settings to both tracks later on, adjust in the mix etc... The audio only comes through when I pick the USB Audio option. Thanks in advance.
Brett

I think you've got the right driver selected, otherwise it wouln't work at all. The single most obvious thing to ask you though (I'm sorry if this is too basic) is where you have the pan controls set to? To get each mic to record on a single channel, you'd have to have one panned hard left and the other panned hard right. If you leave them both panned dead centre, that's exactly what you get - both mics on both channels.

Cannot record multiple mic's with mixer board

I have a Satellite P205D-S7802 - I recently bought a Behringer Xenyx mixer so I can podcast with mutiple mic's. I cannot get anything to record through the mixer. I have everything connected correct and even contacted the Behringer tech support just to be sure. Is there a way to get this to work? It is driving me crazy......Thanx

You may need to go to Control Panel under Sounds and change the default input from the internal to external mic.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Record multiple tracks at once in 11?

Hi
Can you record more than one track at a time in Garageband 11?

Shakey64 wrote:
Can you record more than one track at a time in Garageband 11?
http://www.bulletsandbones.com/GB/GBFAQ.html#maxtracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

Question for sorting multiple coulmns at once in Trinidad tr:table

Hi all,
I am trying to achieve this goal in <tr:table>:
when sorting first column by clicking the table column header, I want to sort a second column in descending order when the first column has same values for several rows, say, something like this layout:
before sorting on column1:
column1         column2
A                        10
C                         7
B                         15
B                         9
B                         20
after sorting on column1, want to have this:
column1         column2
A                        10
B                         9
B                         15
B                         20
C                         7
I tried to add two SortCrterion into the Sortcriteria of the SortableModel binding to the <tr:table> by "value":
List<SortCriterion> lstSortCriteria = new ArrayList<SortCriterion>();
SortCriterion sortCriteria = new SortCriterion("column1",false);
lstSortCriteria.add(sortCriteria);
//== second sort criterion
SortCriterion sortCriteria2 = new SortCriterion("column2",false);
lstSortCriteria.add(sortCriteria2);
myTableModel = new SortableModel(listModel);
myTableModel.setSortCriteria(lstSortCriteria);
but this seems doesn't work at all. I could not find any APIs from SortableModel to achieve my end. Is this doable at all for <tr:table> in Trinidad?
Also, I tried to add this attribute in column2: defaultSortOrder="descending", this doesn't work either.
When debugging, I noticed that in the instance of SortableModel, myTableModel, there is only '_sortCriterion' attribute which has the first criterion: column1, there's no attribute that hold the list of sortCriteria at all in this SortableModel instance.
Thanks,
Shawn

Hi,
the code looks okay to me. The only difference I see to http://technology.amis.nl/2012/03/01/adf-11g-programmatically-configuring-sort-for-rich-table/is that it applies the sort criteria list directly to the table object (should be CoreTable in your case)
Frank

Need help in recording multiple seperate tracks

hello, i've used cool edit and now audition to record for the last eight years or so. however, i've never gone byond tracking more then one mic at a time in the past. with some upcoming projects i will be tracking a full band and need to record multiple mics (most challenging being drums) and i need to be able to assign each mic to its own seperate track in real time.
i will be using a PreSonus firebox which was four inputs. i can make do with four mics just fine. my only problem is i can't find any info and i'm not even sure audition allows for simultaneous multi channel recording. it is imperative i be able to have separation for each mic for mixing. any advice/help? will i be forced to find another program?
thanks in advance,
joel

Audition handles multitrack recording just fine.
You don't say what version of Audition you have (there are variations in how to set up the recording) but if you're on the current 3.0 version, you'd:
Under Edit/Audio Hardware Set up, click on the Multitrack tab at the top. On the "Audio Driver" menu, select the appriopriate Presonus driver. Under "Default Input" Select the Presonus interface. Also select it on the Output menu if you want to outuput sound that way for monitoring. Click Okay.
Go to Multitrack view in the main programme.
Work down the inputs for each track (marked with a right-facing arrow) and select "Mono" and the Presonus output you wish to go to that track. If you want to output back to the Presonus, do the same with the output selection, otherwise just leave it to "Main".
(At this point, I suggest you save a session as "Basic multi setup" or similar to make it faster for the next take--then do a "Save As" for the actual recording you're about to do.)
Click the "R" button on each track you wish to record in (you don't have to do all tracks every time) to arm for record.
Click the main Record button to actually start recording.
If you have an earlier version of Audition or Cool Edit Pro, the procedure is similar but some of the controls are accessed in different ways.
Bob

Multiple mics to macbook

Hey guys I need some help with tech issue.
My department has a weekly talk that is presented in a ampitheatre and broadcasted as a webinar. We are using WebEx. We are having issues with the audio quality especially when people in the amphiteathre ask questions.
I am looking for a multiple mic configuration that I can hook up to my Macbook when presenting this way the audience questions would be clear.
Which accessory / software do you recommend? Typically we will need 2-3 mics.

Very easy, same as I use and best solution, you can have up to 6 mics
ZOOM H6
http://www.amazon.com/Zoom-H6-Portable-Digital-Recorder/dp/B00DFU9BRK/ref=sr_1_c c_1?s=aps&ie=UTF8&qid=1393794895&sr=1-1-catcorr&keywords=zoom+h6
$400
has USB feed to any computer, you can record to any audio application, like Adobe Audition, or Logic Pro, or Sound Forge,
etc. etc.
Or, you can use it by itself and then upload later to your Macbook. Best new audio recording gadget out there.
We are having issues with the audio quality especially
There exists no better portable audio quality than the Zoom H6 unless you spend $2000+ on a portable audio recorder used for live shoots and professional movies.
however even those devices are recording at the same quality sampling rate in WAV.

Is there a way to format multiple images at once? Change colour mode or resolution?

Is there a way to format multiple images at once? Change colour mode or resolution?

It's very easy to make an action.
Go to window > actions
In the actions panel, simply click the 'create a new action' button, it starts recording as soon as you've created it (when you've given it a name).
Now you can apply the changes you want to make to the images on the file you have opened.
After you've done all you need to do. You click the 'stop' button. The action is now ready to use. And you can apply the changes you made on all the other files.
Then you can continue how gener7 explained.
I usually include a save and close command, so that the whole batch doesn't end up opened after running the script.
But if you do that you have to create a new file, and save it to your computer before you start recording the action, otherwise the save command will be replaced by each file. And you'll end up with one edited file in the end. At least for as far as I know!

How do I apply a preset to multiple images at once?

I'm almost embarassed to ask this, because it seems so simple. But I'm new to LR and need some help.
I want to apply a preset (exmample, a preset that resembles film) to multiple images at once. (similar to batch editing in Photoshop) but I want want the white balance etc to necessarily be the same, obviously. Please help!

Select all of your thumbnails in the develop module film strip or in the library prior to going into develop. Then turn on Auto-Sync. Any adjustment you make to your first image will be repeated on all of the selected images. Or just perfect your first image and choose sync. You will see a pop-up dialog and you can choose exactly which develop settings you wish to sync e.g. white balance only or white balance and other settings.
To be clear Auto-sync will apply all develop settings on the fly to all selected images.
Sync will apply the settings from the first selected image to all of the subsequently selected images unless you choose exceptions. For example you may wish to apply exposure, contrast, highlights and shadows from your perfected image but not the crop settings.
Don't forget to turn off Auto-Sync when you have finished otherwise it will affect future editing.
P.S. There is no such thing as an embarrassing question. The beginners forum is designed entirely for that purpose.

How can I preserve row and column addresses on multiple cells at once in Numbers?

How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort. I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula. I want to avoid having to go one by one. I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126' I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill. If there is another way to remedy my sorting problem that would also be welcomed!
THANKS!!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

How to apply lens correction profile to multiple images at once?

I have a quick newbie question and I couldn't find an answer in a brief search that I did. Is it possible to apply lens correction profile automatically to multiple images at once? For my RAW images, LR automatically detects the lens and applies the correction profile for an image if I manually click on "Enable lens correction" option under Develop module (in the right pane where adjustments are made). However, I would like to do this to multiple images all at once.
Thanks,
Osho

Be careful using develop setting synchronization for lens profile across mutiple images! This allows applying an incorrect profile (i.e. Canon 17-40mm profile with synchronization to images shot with multiple lenses) First use the 'filter' tool to make sure you select images shot with only one (1) lens type. Then follow one of the procedures here:
http://help.adobe.com/en_US/Lightroom/3.0/Using/WS0E6E6886-E223-4050-B6E0-A97B5B62EF7D.htm l
You can also change the "default" develop settings with 'Lens Profile' option checked and then save as the "new default" setting. LR will then "automatically" apply lens profile correction on import of new images.

Scheduling Multiple Reports at Once

Is it possible to schedule multiple reports at once - so if I have a set of 40 reports that make up a financial close book, can I just schedule the book?
Thanks,
Chris

Hi ,
use the RUN_PRODUCT() built - in procedure..... for every instance of record , if you have a multi-record-block.....
note: maybe you should give some additional info , adout what the form like , in which circumstances should the reports be called , .. ... e.t.c..
Simon

Firefox will NOT load multiple pages at once, Help!

I cannot get Firefox to load multiple pages at once. If I try this, they will continue to show the "load"/"refresh" symbol forever and ever (at least half an hour by the time I got fed up). I can load one page at a time but even then it takes quite a long time for the page to fully load - god forbid the page has images on it because then it might take up to 10 minutes to fully load.
Sometimes if I try to load multiple pages and then "x" out of them and try to do it one by one, it simply refuses to load ANY of the pages.
I can load multiple pages at one time in IE on my computer, I can load single pages in IE without delay. I can do the same thing in Safari on a desktop mac in the house. So NO, it is NOT my internet connection, thanks.
For God's sake, I'm sending this complaint/question in IE because I KNOW it won't send in firefox. How messed up is that?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Record multiple, simultaneous sessions through one webinar meeting room

Is there a way to record multiple, simultaneous sessions through one webinar meeting room? I know breakout rooms can't be recorded, but is there another way to have users join a main webinar room, select a sub-room/session they're interested in, and then join that sub-session? We want to have four sessions happening at once and allow users to choose which they want to participate in. We'd also like to record the sessions. Thanks for any help you can provide.

Use PPT, or a tool of your choice, to create a slide/object with links to each room. Then the user can click between the rooms as desired.
You may want to use the ?launcher=false command at the end of the URLs to keep the individuals from having the add-in launched multiple times and in multiple rooms at the same time. This will keep the meetings in the individual's browser.

Delete multiple emails at once on iPhone 5s - any fix?

I have alot of emails which "appeared" in my inbox. Not sure if because it's sinced to my home email account which also has alot of emails in the inbox of the server. But my main question is how to delete multiple emails at once. I've read "work arounds" on using the select, move button, unselect and then the trash button. Seems to do what it is supposed to do, however when I go back to my mailboxes, the messages didn't get moved to the trash and are still showing up where they originally were. Any ideas on a real fix out there?
Thanks,
Olmbre

No, there is no way to delete all emails in one step. Of course, you can select multiple emails individually and delete them as a group.

Questions on recording multiple mics at once

Similar Messages

Maybe you are looking for