Questions on Subviews and Import/Export in Data Modeler v3 EA1.

I have a few questions about the capabilities of Data Modeler v3 EA1:
1) Is it possible to rename subviews? Would like more meaningful names then Relational_x - Subview_x.
2) Is it possible to save documents at subview level?
3) Is it possible to import/export subsets of data?
4) Having problems importing Erwin 7 .xml file, is there known problems with this import?
Judy

Hi Judy,
1) To rename a subview just right click on it in the browser tree and select "Properties". In the properties dialog change the name and click OK button.
2) You can save a subview as new Data Modeler design - from the File menu select Export -> To Data Modeling Design. In the newly opened dialog select the subview you want to export and click OK button.
3) After saving a subview as new design (see answer #2) it can be imported in some other design (File -> Import -> Data Modeler Design).
4) What kind of problems do you have with import of Erwin 7.* xml file?
Regards,
Ivan

Similar Messages

ECC Client export and import with BW data model

Dear BW Expert,
We are now have BW QAS system which is connecting to ECC600QAS.
Now we are going to:
     First >> Export data ECC600QAS.
     Second Drop this client
     Third Create client with the same logical name as ECC600QAS and then import again with the same logical system name is ECC600QAS. Ofcourse we will re-establish again connection between ECC600QAS and BW QAS.
In this case, do we need to create all data model or mapping data in BW again. Please help on this.
Thanks and Regards,
Kim Cheo.

Hi Reddy,
All your notes do not mention anything about in case Client refresh with the same logical name.
Our case is that we do:
      Step 1:         Export client logical name is "ECC600QAS".
      Step 2:         Drop client "ECC600QAS"
      Step 3:         Import again and create the same client logical name "ECC600QAS".
      In this case do we need to create again all data model, mappying rule or transformation.
      Really, I can not found any idea there in all your note.
Thanks and regards,
Kim CheolYeon Lee.

Export and Import of Configuration Data

Hi All,
I have created a number of custom properties, structures, groups, renderers, layout sets etc and would like to move them from Dev to Test system.
I have found the following in the help doco:
"Export and Import of Configuration Data"
http://help.sap.com/saphelp_nw04/helpdata/en/e1/029c414c79b25fe10000000a1550b0/content.htm
However I am unable to see its functionality in our portal systems (namely the Actions->Export and Actions->Import functions).
Our version of Portal is: 6.0.9.6.0
KM: 6.0.9.3.0 (NW04 SPS09 Patch3)
Therefore we should be able to see it? no?
Are there any special settings to see these buttons?
Cheers,
Vic

Thanks for your replies.
OK, so in otherwords, it is not available in SP09 and only in SP12+.
So, to "transport" this information I will have to manually reapply thes settings in the Test system!
Message was edited by: Victor Yeoh

Getting problem in Import/export of data

Hi,
I have just cloned my database to an another machine. Everything is ok with the database.But when I try to import/export the data from that new database I get these error messages,
Exp 00056 - Oracle error 1403 encountered
ORA-01403 - No data found
Exp - 00000 - Export terminated unsuccessfully
santosh
[email protected]

hi
Examples of Using Different Releases of Export and Import
Table 19-7 shows some examples of which Export and Import releases to use when moving data between different releases of the Oracle database.
Table 19-7 Using Different Releases of Export and Import
Export from->Import to Use Export Release Use Import Release
8.1.6 -> 8.1.6 8.1.6 8.1.6
8.1.5 -> 8.0.6 8.0.6 8.0.6
8.1.7 -> 8.1.6 8.1.6 8.1.6
9.0.1 -> 8.1.6 8.1.6 8.1.6
9.0.1 -> 9.0.2 9.0.1 9.0.2
9.0.2 -> 10.1.0 9.0.2 10.1.0
10.1.0 -> 9.0.2 9.0.2 9.0.2
Restrictions When Using Different Releases and Versions of Export and Import
The following restrictions apply when you are using different releases of Export and Import:
1.Export dump files can be read only by the Import utility because they are stored in a special binary format.
2.Any export dump file can be imported into a later release of the Oracle database.
3.The Import utility cannot read export dump files created by the Export utility of a later maintenance release or version. For example, a release 9.2 export dump file cannot be imported by a release 9.0.1 Import utility.
4.Whenever a lower version of the Export utility runs with a later version of the Oracle database, categories of database objects that did not exist in the earlier version are excluded from the export.
5.Export files generated by Oracle9i Export, either direct path or conventional path, are incompatible with earlier releases of Import and can be imported only with Oracle9i Import. When backward compatibility is an issue, use the earlier release or version of the Export utility against the Oracle9i database.
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1013164i hope it will help u.
regards
Mohammadi52
Message was edited by:
Mohammadi52

Import/Export xml data from subtree of dynamic XFA form

Hi
We would like to import/export xml data (subtree) of a dynamic xfa form. The following script does only work with static AcroForms:
formular.content.subformDaten.Button1[1]::click - (JavaScript, client)
event.target.exportAsXFDF({aFields:["formular[0].content[0].subformDaten[0]"]});
With dynamic forms the script does export an empty xml file (no data is included, only xml root tag):
<?xml version="1.0" encoding="UTF-8"?>
<xfdf xmlns="http://ns.adobe.com/xfdf/" xml:space="preserve"
><f href="ExportTest_frei.pdf"
/><ids original="EA43F92A6B6EA34F9C4DBBC2DA0B1840" modified="6A7C6282A167594F91240B773AA979A7"
/></xfdf
>
Any ideas? Many thanks.
Best regards,
Daniel

Hi Paul
The Problem that Daniel posted was originally mine. Now after subscribing to this forum myself, I try to describe the aim of using exportAsXFDF/importAnXFDF.
exportData("", false) and exportXFAData works, in my opinion, only with a DataConnection. In my form I have indeed such a connection for sending the whole form. But in addition I need the possibility to export and import only part of the data without overwriting the rest of the filled form.
exportAsXFDF works with static forms. So there MUST be a possibility that works with dynamic forms, right?
I hope anyone has a solution.
Beat

Domains and Logical Types in Data Modeler

Been out of serious design work for a long time. Can someone provide a good pointer to descriptions on Domains and Logical Types and presented in the Data Modeling tool?
For instance I am having trouble tracking the following distinctions:
Domain Logical Type
LongText Varchar
ShortText Char
Text Char
NText NTEXT
NVarchar NVARCHAR
CHAR and VARCHAR are listed as Logical Types but not Domains. There is a TEXT logical type, but ironically, it does not correspond to the Text Domain. Varchar2 appears in neither list. I believe I ready the N* domains/types are for international characters (multi-byte?), but basically see no pattern here so was hoping someone could straighten me out.
Thanks,
Robert Kuropkat

Hi Robert,
Logical types are abstraction for native data types in supported databases. You need logical types if you want to import from database or DDL script (mapping of native to logical is important here) or want to generate DDL script (mapping of logical to native). You can delete all logical types (only "unknown" has importance) and create your own logical types. In this case you have to map them to native database types. If you use only Oracle database then you can delete types related to other databases. Of course you can rename existing logical types if you don't like how they are named.
Domains are based on logical types - you need logical type in order to have valid domain definition. Provided domains are just sample. You can delete them - the only important here is "unknown". You can create two types of domains (it's usage point of view) - 1) per installation - common for all designs; 2) per design - they appear only for design they are defined. You also can import domains.
Also domains are automatically created during import of DDL script - it's kind of data type aggregation - domain is created for each used data type.
Best regards,
Philip

Import/Export of XMI models to/from the EMFStore

Hi,
Is there a way to import/export the EMF model in XMI format into/from the EMFStore?
Appreciate any response!
Thank you!

Hi Yuri,
have you already tried to read the XMI file via a resource, get its
contents and add them via ESLocalProject.getModelElements().
Cheers,
Edgar
> Hi,
> Is there a way to import/export the EMF model in XMI format into/from
> the EMFStore?
>
> Appreciate any response!
>
> Thank you!
>
>
Edgar Mueller
Get Professional Eclipse Support:
http://eclipsesource.com/en/services/developer-support/

What kind of real time problems and issues arise in Data Modelling

Hellooo experts,
I am not a BW expertise, so just want to gather some knowledge on Problems and issues related to DATA MODELLING, if any body have a document or a link can you please snd it to [email protected] or reply to this post. I promise to reward you for proper answers hope this is the way i say thanks for your help.
kishore

hi kishore,
The first and most important problem is to understand Clients requirement. Clients even some time not aware of how to utilize efficiency of BW, as they are very much use to with traditional SAP R/3 reporting. So most of time we have to suggest options to client.
If we come to technical aspect, than identifying Key Figures and Characterstics is the most important task. And how you map that to available infoobjects. Attributes also plays major roles, like which attributes is better to use as navigational one and which as exclusive attribute.
Their is long list for data modelling issues, its better you refer either Mastering BIW book by Mac'Donalds. And SAP Help Library is also having good material.
regards,
kamaljeet

Export and import a table data

Hi All,
There is table abc which is having appprox 40lak records without partitions(and have dmp of this data). Due to space constraints I want to compress the data and put it in archive schema.
My question is:
1) Can we import the data into other schema(say: archive schema) in compressed mode. If so could you please let me know the syntax for that.
2) Can we import the data into some temporary table(say: temp) in same schema?
3) And if any blob column exists in table then can we import the data without this blob column data.(Supposing the export dump has the blob data).
Is it possible, or whould we export without this blob column and import this to other table?
Please help me out.
Edited by: user11942774 on 4 Dec, 2011 10:33 PM

Thanks Mahir,
Could you please let me know the syntax or with any examples if possible.
is it possible to drop any column say blob column after the table is in compressed mode?
Edited by: user11942774 on 4 Dec, 2011 10:53 PM
Edited by: user11942774 on 4 Dec, 2011 10:54 PM

Is there a note app that features encryption, folders, backup, and import/export?

Hi friends,
I have been searching for a month for a Notetaking app for the iphone which has these attributes:
able to import/export notes from some form of text file suchas csv. I need to bring over a large number of notes from my android phone. I can perl-script and should be able to massage my data into any format requiredby any text-based importer. I would expect this feature to be based either on itunes or a proprietary sync program on a Mac.
encryption (not just a password), preferably AES-256 bit orhigher
features categories, tags, or folders (any one of these isfine)
able to backup and restore notes in encrypted form, in caseof loss of device
You would think this is a very basic set of features, but I have notbeen able to find anything on the App store that includes all of thesefeatures. If you know of any such app, please let me know.
Thanks a lot!

There should be some utilities that might do that on macupdate.com if you search around in there. It could be done as a macro action in Photoshop, but that's an expensive solution for this. VueScan could also potentially do it, but is also not cheap.
Also, some of the utilities that come bundled with scanners may be able to do this, but only when running the scanner they came with.
Definitely the features exist on the Mac like auto-recognition of multiple images on a page, auto-rotation, auto-levels, PDF export etc. You just need to find them in the right combination in the right app.

IMPORT/EXPORT FROM DATA BUFFER

Hi,
I have some code like this:
DATA: b type xstring.
DATA: a type xstirng.
EXPORT '1234' TO DATA BUFFER b.
IMPORT a FROM DATA BUFFER b.
for some reason a does not get set to the value that I assigned to b.
However, this code works:
DATA: b type xstring.
DATA: a type xstirng.
EXPORT some_internal_table TO DATA BUFFER b.
IMPORT a FROM DATA BUFFER b.
Does anybody know why internal tables work but other data types do not?
Thank you.

EXPORT '1234' TO DATA BUFFER b, not working because, you did not assign a variable name to '1234' to be stored as in data buffer B.
Change the code to:
DATA: b type xstring.
DATA: a(4) type c.
EXPORT a = '1234' TO DATA BUFFER b.
IMPORT a FROM DATA BUFFER b.
It's working in the second case because, some_internal_table is the name of the variable in databuffer B and you are importing into the same variable in IMPORT
Regards
Sridhar

Maxl Import - Export L0 data crashes

Hi to all,We have an automation Maxl script, for a mission critical application where we export 6 times a day all L0 data, then import them back again, .It has been running for sometime smoothly, but suddenly it startet to crash, meaning it doesnt export the data or import it back in.We write on a file specific directory other than app\db (we tried this one but didnt work).We use MS W2000 server Essbase 6.5.We heard from Hyp that maybe there is a bug on v6.5Does anyone had similar problems?Thanksyannis

The SQL run via the load rule understands my subvars. The load rule SQL looks like this:
select...
WHERE
AND (('1' = '&IncSpanYr' --IF THE PERIODS SPAN YEARS
AND (('12' = '&CurMoNm' --IN JUNE LOOK INTO NEXT YEAR PERIOD 1
AND ((A.FISCAL_YEAR = '&CurYrNm' AND A.ACCOUNTING_PERIOD IN ('&PriMoNm', '&CurMoNm'))
This turns into:
WHERE
AND (('1' = '1' --IF THE PERIODS SPAN YEARS
AND (('12' = '12' --IN JUNE LOOK INTO NEXT YEAR PERIOD 1
AND ((A.FISCAL_YEAR = '2014' AND A.ACCOUNTING_PERIOD IN ('2', '3'))
My issue is getting a dump of all that data that the SQL is pulling. I don't see a way to do that in the import database command. A separate job on the SQL side (like SSIS) could pull the data, but can't access the subvars easily. Does that make sense? Or did I misunderstand your suggestion?
Thanks-
Cameron

How to automate Import/export Essbase data 11.1.2

Hi,
After migration from Dev to Test environment using LCM (EPMA Planning, Shared services) I have questions:
1) How to automate export from source and import in Destination?
2) If we have enabled MSAD in shared services, What should be standard practice to sync provisioning in both environment?
Regards
Kumar

Hi John,
I see only Native directory
Application Group>Foundation>shared services> - Native directory
- Task flows
Application Group>Foundation>shared services> - Native directory>assigned Roles> foundation>shared services
I feel MSAD should be here but not sure as it is just new environment and we enabled MSAD.
Please suggest where can i check Import/export in LCM 11.1.2?
Regards
Kumar
Edited by: Kumar 1 on Oct 20, 2011 3:22 AM

Export Master Data Model from MDM solution.

Hello,
I have been assigned the requirement to integrate our product with your “Master Data Management” solution. To be more specific, I need to import the Mater Data structure (model), from your companies MDM solution, into our product to build its table/column structure. What I am looking for is technical documentation that will help me make this possible.
Here is a list of some questions I have that technical documentation could address:
•     Does your MDM solution have the capability to export the underlying Master Data structure (model)?
•     What form is the data structure exported (db schema, data dictionary, etc)?
•     What format would the exported information be in (XML, delimited text file, SQL DDL)?
•     If the format is XML, is there an XML Schema that defines what it will look like?
•     Do you have any sample export files that I can work with?
•     Is there technical documentation that would help me make this possible?

If you want to integrate with DRM I would suggest using the API (check out the SDK). This is the preferred and supported way to inject or extract from DRM from an integration standpoint. You can also do imports/exports, for example exporting a hierarchy in XML, to a table, etc.
Directly modifying the tables is not supported or encouraged; the DRM engine enforces many rules like validations, keeps multiple versions, tracks changes in transaction logs, etc, besides the fact that the database structure can change during upgrades. Additionally, due to the dynamic configuration capabilities some things like property values are stored in a one-to-many table that may be pivoted from what you expect.

Import of ERwinR8 data models into Oracle SQL Developer Data Modeler

Hi! My site want to move off ERwin R8 and use Oracle SQL Developer Data Modeler. When will Oracle SQL Developer Data Modeler support the import of ERwin R8data model xml?
Thanks very much, Patty

Hi,
You can add the classic SCOTT schema with EMP/DEPT tables to a 10g Express Edition DB by running this script as SYSTEM:
C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS\ADMIN\scott.sql
Also, you may wish to upgrade to the current version of SQL Developer:
http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html
As for importing a .dmp file, you import it to the database, not SQL Developer. Please post that question to the appropriate forum.
Regards,
Gary Graham
SQL Developer Team

Questions on Subviews and Import/Export in Data Modeler v3 EA1.

Similar Messages

Maybe you are looking for