Questions on the technical feasibility of some desired functions in OBIEE

Question1: Is the functionality shown in the picture (URL link) below possible?
http://hi.erp100.com/attachment/200902/13/26518_1234504624r78c.jpg
Question 2: Can we achieve the functionality shown in the picture(URL link) below?
http://hi.erp100.com/attachment/200902/13/26518_12345053433ZJG.jpg
Edited by: user8016603 on 2009-2-12 下午10:20

You can add navigation to another dashboard when clicking on a chart, but I'm afraid this is not what is wanted. You can only specify one dashboard, not different dashboards based on the part of the stacked bar chart.
About requirement 2: I don't think this is possible. I have tried it myself and on the vertical axis of your chart, the chart engine expects data which can be aggregated (like numbers, dollars etc.). Single characters cannot be aggregated, so these are not accepted on the vertical axis.
Regards,
Stijn

Similar Messages

Question about the ASA 5550 CSC module antivirus functionality with client VPN

Here's a quote I got from SonicWall in regards to antivirus endpoint control.
"EPC conducts robust pre-authentication interrogation of remote endpoint devices to identify the device, as well as determining the integrity of the device leveraging end-point criteria like anti-virus updates. Dell SonicWALL Recurring EPC performs endpoint scans at user login and at administrative defined intervals to ensure the ongoing integrity of any endpoint."
My question is - does the CSC module have this same functionality. If not, how does the antivirus functionality work? Thanks,

You do not need AnyConnect Mobile licenses for users connecting from a Windows desktop. Those licenses are only required for users with mobile platforms.

Integration technical feasibility

We are posting the following inquiry in order to verify the technical feasibility of a requirement for a system we are currently specifying.
The situation is the following:
We need to create a Purchase Order (PO) in SAP R/3 from an external application
Instead of entering the transaction and then selecting Purchase Requisitions (PR) or Quotations (Q) to include in the PO, the order is exactly the other way around: having the user selected a series of PRs or Qs, allow him the creation of a PO passing this PR and Q information as parameters.
Our constraint is that we need to emulate the behaviour of ME21 standard transaction without re-writing the logic, and BAPI_PO_CREATE1 does not cover all the functionality that our business requires (in fact, using a BAPI requires developing the front-end logic anyway). BAPIs are not an valid option in this case (at least in the way we know them).
We have learned that the ME21N transaction (enjoy transaction) allows to drag & drop a PR from the Document Viewer pasting this information into the PO and carrying out the validations.
The questions therefore are:
1) Is it possible to pass a series of PRs or Qs as parameters to a SAP transaction from an external application? We intend that the shop cart on top of ME21 understands the dropping of a document; could it be possible for the transaction to understand the same information coming from outside SAP?
2) If possible, how does it work?
3) In case it is not possible, our fallback is to embed SAP WEB GUI screen in our application, but we need to change the Look & Feel. How far can we go? Is it possible to re-design the WEB GUI to make a different presentation of the data (lay-out, colours, grids, etc)?
Regards,
Miguel.

you can create a composite process in nw04s where your external application will pass information to a Guided Procedure defined in SAP GP Design Time (see SAP Composite Application Framework - CAF Tutorial Center [original link is broken]) where a callable object of type "SAP Transaction" (see http://help.sap.com/saphelp_nw2004s/helpdata/en/43/f066f5cec64c5de10000000a155369/frameset.htm) will present ME21 prepopulated with data from external system to the user

How to view technical name of a planning function in IP?

Hi,
I have 2 aggregation levels created with 2 planning functions by someone else.
I want to view technical name of that planning function so that I can include it in my WAD template.
Please provide the info.
Thanks & Regards,
Rashmi.

Hi Rashmi,
In the Planning functions tab you click on the button right side of the window.
Then you will get a window where you can select the columns to display. Pull the technical name window to display columns.
Then you can see the technical name of that planning function.
Regards,
Ravi Kanth

Impact of transporting some of the Technical Content Cubes

Hi All,
We are on BI 7.0.
We would like move only 5 of the cubes from Technical Content. We activated all the 11 cubes using Standard Report.
Questions:
1. I read in some of the threads Technical Content needs to be activated manually in the target systems...<b> i'm thinking we can transport it</b>.
2. I want to transport only 5 Cubes... <b>i don't think transporting these 5 cubes models without any other is not problem.</b>
Let us know your view.
Thanks inadvance!
Nagesh Ganisetti.

1. I read in some of the threads Technical Content needs to be activated manually in the target systems... YOU CAN ONLY ACTIVATE IN DEV AND TRANSPORT
2. I want to transport only 5 Cubes... YOU CAN COLLECT THE 5 CUBES AND TRANSPORT JUST THEM.
Hope this helps
EmJay
--- Assign points if helpful

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Some questions on the Sleek

Hey there. I have some questions regarding the Zen Sleek, since I may get one to replace my Zen Xtra.
First of all, how much does it cost to have the battery replaced? I've heard/read that you cannot do it yourself (which irks me to know end), but I haven't found anywhere what it would cost to have it sent in once the battery is dead.
Second, does the unit scratch easily? I don't want to buy an ugly, bulky case for it (since that's all that seems to be out there for anything that's not a Micro), but if the Sleek scratches as easily as the iPod, I may be forced to.
Thanks in advance for your help.

cera wrote:Thanks SSR, I'll have to look into the battery replacement program. I've read up on the CreativeCare protection plan, and it SEEMS that the battery would be covered under it. I'll have to e-mail or call and check.
I know the battery is covered under warranty, but it certainly shouldn't die ordinarily during that period.
I've left the screen protecting sheet on my Zen Xtra, and it's in great shape, so unless it becomes obnoxious, I think I'll end up leaving it on the Sleek as well. I may look into buying a case, or possibly just making my own.
There are some threads on cases for the Sleek so it's worth searching back. Creative often fail to launch a case as an accessory, or certainly to launch one at the same time as the player is released. This is a great shame, aside from not bundling a good case with the player, as it keeps the player looking good and may well end up making it last longer.
This is completely off topic, but I just realized that you wrote/host that excellent Donnie Darko FAQ. It helped me a lot when I first saw the movie and tried to figure it out.
Glad it helped

Some simple questions regarding the Xcode.

I have some preliminary questions regarding the Xcode (objective C):
What is the difference between the programming files followed by .h and .m?
What does an asterisk * followed by a text mean (i.e. *window;)?
Is there any source that briefly explains the most common codes with examples (nsstring, nsarray, iboutlet, inaction.....etc)?
Any other tips will be highly appreciated.
Many thanks.

Xcode is the IDE.
Objective-C is the most common language used within Xcode.
UIWindow *window ..... the * means return the address of the instance variable 'window'.
An * is called a pointer to a variable.
Everything you need is explained here: https://developer.apple.com

Some question about the renegotiation function in SRM Contract (GOA)

Hi All Expert,
We are on SRM 5/4.6, there is a question about the renegotiation function in SRM GOA.
Can we renegotiate the price for some parts in the GOA items with this function ( e.g. Only renegotiate one item in the contract) ?
Will the item price updated automatically after the renegotiation?
Many thanks in advance!!!
Wendrin

Hi Sanjeev,
Many thanks for your help.
One more question, if I add a new item when we renegotiation, will it be transfered to contract and create a new item after that?
Thanks and best regards
Wendrin

We have to restrict the visibility of Questions based upon technical and co

We have to restrict the visibility of Questions based upon technical and commercial. For example if there are two section commercial and technical, technical team should not be able to see commercial questions and vice-versa

Hi
I could suggest an alternative approach. You take a call whether it suits your business process
Create a project for the event. Within project you can create two seperate Rfx one with technical team as collaborator and the other with Commercial team. Two Rfx would be evaluated and awarded seperately by respective team. You can take help of your technical expert to create custom report for overall evaluation
Regards
Mudit Saini

HT5312 This whole security question crap is a hassle. If I wanted to talk to someone one the phone to have some dumb questions reset, I would call them. Why can't they just send it in my dang e-mail. So forget it. I'll just forego the purchase.

This whole security question crap is a hassle. If I wanted to talk to someone on the phone to have some dumb questions reset, I would call them. Why can't they just send it in my dang e-mail. So forget it. I'll just forego the purchase.

Then call iTunes Support and get them reset:
http://support.apple.com/kb/HT5699?viewlocale=en_US
or by email:
https://ssl.apple.com/emea/support/itunes/contact.html
If you have another iOS device or another SMS-capable device, you can use this method:
http://support.apple.com/kb/ht5570
Read the entire article carefully to see if this method would be a preferable approach for you.
Cheers,
GB

Hello-- I'am thinking off making an app to the iphone, but i'am not sure aboutsomething. the app should get some alarms from a specific phone number, and my question is, can i make an app that can receive message from a specific phone number ?

Hello-- I'am thinking off making an app to the iphone, but i'am not sure aboutsomething. the app should get some alarms from a specific phone number, and my question is, can i make an app that can receive message from a specific phone number ?

This needs to be asked at http://developer.apple.com/

I forgot my apple Security Question. So when I Redeem Some money to my account and I want to purchase it's need the security question, I forget it. So how could I reset my security question of apple ID?

I forgot my apple Security Question. So when I Redeem Some money to my account and I want to purchase it's need the security question, I forget it. So how could I reset my security question of apple ID?

1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contacting Apple for support
        and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions

Hi, I tried to change my security questions on the internet. But, for some reason, the button to change them is not there! This is annoying as I have recently bought an iTunes voucher and now I cannot buy any new apps. Can anybody please help me!!

Hi, I tried to change my security questions on the internet. But, for some reason, the button to change them is not there! This is annoying as I have recently bought an iTunes voucher and now I cannot buy any new apps. Can anybody please help me!!

Security questions:
https://discussions.apple.com/docs/DOC-4551

I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

I have problem with the security question i forgot it some body tell me they will show down of the question forgot the answering but nothing show help me plz thanks

The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Questions on the technical feasibility of some desired functions in OBIEE

Similar Messages

Maybe you are looking for