Questions Questions Questions via bootcamp/bad hard drive

I think i fried one partition of my hard drive. I have the latest bootcamp installed onto my macbook pro 13". One partition is MAC OS 10.6.2 and the other is Windows 7 Ultimate 32 bit. The Windows 7 boots up just fine. The Mac 10.6.2 does not. It freezes on the apple logo in the beginning of the start up. I ran disk utilities from my install DVD and it indicated that it could not repair the mac os 10.6.2 partitioned drive.
Has anyone had this problem? the drive is only 6 months old. What would be a good utility to make sure both partitioned drives can be maintained and fixed?
Interestingly I also noticed that when running under windows 7, the macbook pro heats up considerably. Is there anyway to fix this problem?

Never rely on just Apple First Aid to find or repair problems.
There are a number of good solid 3rd party ($$) programs that will.
Alsoft Disk Warrior 4.2
MicroMat TechTool Pro 5.0.x
Drive Genius 2
are the three I am most familiar with.
In any event, you will want to install OS X on external drive for emergency repair maintenance and such.
Clone your system (SuperDuper, Carbon Copy Cloner) is a good idea also, to backup volume (or even a sparse disk image).
Apple doesn't - and Windows can't - it is up to the vendor of the motherboard or 3rd party fan control and monitoring the sensors. Normal steps like elevating the laptop so air gets underneath... not sure what people are doing, and heat is an issue with MacBook/iMac.

Similar Messages

  • Not solved with Blinking Folder with Question Mark after Erasing Hard Drive

    Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings 
    in response to Niel
    Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
    Me too had tried the command+R and failed to manually connect to my network. Can anyone help?

    Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
    On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true.

  • There is a question mark on my hard drive disk, how do I get rid of it.

    There is a question mark on my hard drive disk, how do I get rid of it. I recently went to the genius bar in Albuquerque, NM and they restarted it and did a partition on it and what I needed was fixed but I still have a  question mark on my start up disk.

    There is no startup system on it. Or, you need to open Startup Disk preferences and select a startup disk. Or your startup disk lacks a name such as "Macintosh HD," for example.

  • Is installing Windows via bootcamp bad for my hardrive? (It crashed)

    Hello,
    I purchased my new Macbook Pro 13" in January of this year, and my hardrive recently completely crashed. I was lucky enough to have Apple pay for a new hd, but I really want to know what caused it. The only thing I can think of that makes any sort of sense is that installing Windows via bootcamp screwed up the hardrive somehow and caused it to fail from getting worked too much from always restarting into Windows / having too much of my hd dedicated to Windows (150 gb of my 750gb SATA hd). I dont know if any of this makes sense, or if I just got really unlucky and got a bad hd from the factory. I have never physically damaged my macbook (like dropping it or whatever) and have never stored it in extremely hot or cold temperatures. The copy of Windows I installed was legit and everything....so I am scared to reinstall windows in fear that my hd will fail again
    So my question is this...... is there any way that the bootcamp partition could have cause my hd to fail? Is it safe to go ahead and install windows again?
    Thank you for you time.

    I have never heard of bootcamp causing hard drive failure. I think it is more likely that you were unlucky and ended up with a bad drive. Something like 1 in 100,000 fail, that 1 has to land on someone. If you are worried about bootcamping again I would recommend Parallels or VMWare Fusion. They are both excellent virtualization applications and offer a soft cap on the windows partition size because it is a file kept inside of OSX instead of a physical partition. I have been running Parallels for 6 months with no problems.
    Best,
    Stuart-

  • Lenovo B570 Bad Hard Drive

    My daughters laptop won't boot and won't allow me to do a system recovery which I suspect is indicative of a bad hard drive.
    I've been through the troubleshooting forums and from the best I can tell, it's toast.
    The laptop isn't under warranty anymore and I know can buy a new drive from lots of places but it doesn't come with the OS. Does Lenovo sell these drives with OS installed so I can just pop it back in without the hassle of buying a windows cd, finding the right divers etc etc.

    Welcome to the Lenovo Community !
    I don't know about Lenovo selling an OS installed hard drive, kind of doubt it, but another option to consider is purchasing a set of recovery discs from Lenovo for your model.  Give Lenovo Support a call about the hard drive to see if that is an option. Otherwise check with them on availability and pricing on the recovery discs.
    Lenovo Support
    1-877-453-6686
    24 hours a day 7 days / week
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • How to recover data from bad hard drive

    Once a hard drive goes bad (cannot get into the computer), is there any hope of recovering any data from it?  If so, how?

    Do you mean the hard drive is mechanically broken for sure?  It's not a data corruption issue that is causing a problem with starting up the Mac, but maybe not be a bad mechanism?
    If the drive is definitely broken, there are businesses that specialize in recovering data from bad hard drives.  For example
    http://www.drivesaversdatarecovery.com/  (I always saw their booth at MacWorld Expos...)
    The cost of such services is usually high.
    cannot get into the computer
    So that probably means the hard drive in question is the internal drive?  If you don't know for sure that the hard drive is physically broken, you can try starting up using your Mac OS X installation disc.  Insert disc in optical drive and start up with the C key held down.  When you get to Installer's screen, go up to the menu bar and run Disk Utility from the Utilities menu.  Does the internal drive appear in the Disk Utility sidebar?
    Alternately, if you have another Mac (that has FireWire), you can try starting the Mac with the problem in FireWire Target Disk Mode,
    http://support.apple.com/kb/HT1661
    Connect the "target" Mac to the other Mac (running normally) using a FireWire cable.  Run Disk Utility on that Mac.  Does the hard drive of the Mac in FireWire Target Disk Mode appear in the sidebar?
    If you can get the internal drive to appear in Disk Utility, you may be able to run Repair Disk on the First Aid tab.  There are also third-party utilities, such as TechTool Pro (Micromat), Drive Genius (Prosoft), and Disk Warrior (Alsoft), that may be able to fix (or at least recover data from) the hard drive.

  • Cisco IDSM-1 bad hard drive

    Hello,
    A bit of an odd question but does anyone have any kind of recovery software for the Cisco IDSM1? I have a Cisco 6509 with and old(!) Cisco WS-X6381-IDS that seems to work fine, but has a bad hard drive and therefore wont boot. I get the "boot loader" prompt where I can select maintenance partition or application partition but both result in an I/O bad disk error. I know the WS-X6381-IDS is ancient, but I find the card oddly fascinating. I can browse the "application" software on the download center but I don't see any kind of recovery software. I can obviously replace the hard drive, but how can I re-install the maintenance/application partition and software on the new drive? I'm not even sure if this part of the card was ever user replaceable/maintainable.
    Thanks in advance!
    --Will
    *EDIT*
    I was able to figure it out. The files hosted on Ciscos download section, are cab files of the root of  the Windows NT 4 install that makes up the IDSMs primary operating system. If you take the hard drive (or another dirve) out of the IDSM and put it in a computer, install Windows NT (create two partitions), boot linux, delete the contents of the partition, and copy the files from Ciscos site to the partitions. The drive should boot right up.
    Thanks,
    --Will

    Hello,
    A bit of an odd question but does anyone have any kind of recovery software for the Cisco IDSM1? I have a Cisco 6509 with and old(!) Cisco WS-X6381-IDS that seems to work fine, but has a bad hard drive and therefore wont boot. I get the "boot loader" prompt where I can select maintenance partition or application partition but both result in an I/O bad disk error. I know the WS-X6381-IDS is ancient, but I find the card oddly fascinating. I can browse the "application" software on the download center but I don't see any kind of recovery software. I can obviously replace the hard drive, but how can I re-install the maintenance/application partition and software on the new drive? I'm not even sure if this part of the card was ever user replaceable/maintainable.
    Thanks in advance!
    --Will
    *EDIT*
    I was able to figure it out. The files hosted on Ciscos download section, are cab files of the root of  the Windows NT 4 install that makes up the IDSMs primary operating system. If you take the hard drive (or another dirve) out of the IDSM and put it in a computer, install Windows NT (create two partitions), boot linux, delete the contents of the partition, and copy the files from Ciscos site to the partitions. The drive should boot right up.
    Thanks,
    --Will

  • Replaced What I Thought was a bad hard drive...

    I recently bought an iBook that I knew had issues. I had another iBook with a bad hard drive that I replaced without problems. Now, I just tried to replace the hard drive on the new one, made sure all the connections had been made, etc. When I went to use the restore disk, it does not recognize the new hard drive.
    Is this a bad cable or something else?

    It sounds like you are having the same problem I did with a new hard drive not being recognized. I replaced the hard drive in my iBook G4 and it wasn't recognized at all. I took off the lower case to be sure it was securely plugged into the logic board and reassembled it and again no dice. I then completely disassembled the iBook and checked everything including the cable and put it all back together again and again, no dice. But I did hear it spin up and run. So I thought a while and then decided to try resetting the PMU several times. And then the drive was recognized, and I was able to proceed to install the OS. Don't know why this worked, but it did for me.
    Start up and listen carefully and see if you can hear the hard drive. You may boot up to a flashing world which will eventually turn into a flashing Mac folder/question mark. After resetting the PMU, you should be able to boot up directly to the flashing folder/question mark. If so, try again and see if DU can see the drive then. If you can hear the drive spinning, then that it would argue that the cable is working to some degree at least.
    Good luck!

  • Bad Hard Drive or Bad File System?

    Good morning.
    A few months ago my late 2008 iMac went to the Genius Bar for what I was convinced was a bad hard drive. I was having long "beachball" pauses, until I couldn't do much without waiting several seconds, at least, for the program to respond, even if I wasn't running much of anything. I started seeing I/O errors in the kernel log pointing to the system disk. Finally, the system stopped booting, getting stuck forever at the grey apple screen. The disk utility was unable to repair the file system and the complete hardware test confirmed a problem with the hard drive.
    So I was pretty surprised when I lugged the thing to the Genius Bar and they decided the file system was just totally messed up. They reinstalled Snow Leopard (something I could have done at home, had the tech on the phone not agreed with me that it was a physical issue), and I went home. It worked great for a time. I couldn't understand how a system could develop a problem so severe, but it worked and I was happy.
    But now it looks like I'm running into the same issue. WoW chokes. Firefox freezes. iTunes 10 makes me want punch a wall. I'm not necessarily running all three at the same time, and other program are starting to act the same way. And as of last night, those I/O errors are appearing in my log again (oh yeah, the console freezes too).
    If it's not a physical disk issue, I just don't understand how this could happen twice. IIRC, the Genius explained that the file system is self-healing, but eventually the problems stack up until it just craps itself. Is HFS such a delicate flower? I was gently admonished for doing things like running WoW and having a Bootcamp partition (the latter of which I don't have now). This seems like a silly thing to worry about. Both are perfectly normal uses of any reasonably powerful system.
    Could it really be messed up a second time? Should I just insist that the hard drive be replaced? If you do think it's nothing more than a logical issue, can you help me understand how this happens and how to prevent it? I'm trying to understand Macs as well as I understand Windows-based PCs.
    Thanks!

    Thanks for the reassurance on HFS, Macbig. I wanted to trust the expertise of the Genius, but it was a pretty confusing situation. I saw every sign that on a non-Mac would scream failing hard drive, including an actual failed hardware test, and to have someone confidently tell me that the hard drive was fine and that the test could determine the drive was failed based on a screwy file system left me doubtful that I could ever quite understand these Macs.
    I know I won't be able to take my iMac in for service this week, but maybe I can get a ticket in for parts in the meantime.
    WZZZ, I will definitely run the extended test again. S.M.A.R.T reports all is well, but I can't remember the last time I've seen S.M.A.R.T warn of approaching doom before it was too late.

  • I run my iTunes via a external hard drive, however it has lost all it's contents and I haven't backed up! What can I do?

    I run my iTunes via a external hard drive, however it has lost all it's contents and I haven't backed up! What can I do?
    My iPad contents probably 75% of my iTunes library, but I'm scared to sync just in case in wipes the entire contents. I know I should of backed up but it was one of them jobs I never got round too (will def do now if my problem is solved)
    Can anyone help with a solution?
    Many thanks
    Cobwebs73

    If all of your media is from iTunes, don't worry about it. You can either transfer everything on your iPad from your iPad to your commputer; and/or you can redownload from iTunes all music and apps, and most of everything else.
    If any of your media is from other sources, that's not so easily recoverable. If it's on your iPad, you can transfer it to your computer via a third-party application such as Senuti. (There are many alternatives to Senuti, some work just as well and are free.) Anything from non-iTunes sources and not on your iPad is completely gone, unless you have CDs or other physical media from which you obtained it stored somewhere.
    At least now you know how important it is to have a backup.

  • Cannot uninstall cs6 bad hard drive, any suggestions?

    Cannot uninstall cs6 bad hard drive, any suggestions?
    THank you

    Thank you for the Adobe contact. They connected me to the chat link and the Adobe tech Support rep sent me a License Recovery download link (attached) http://download.macromedia.com/pub/support/tools/LicenseRecovery111.dmg.
    I have 10.10.1 Yosemite. When I open the download folder and click on the LicenseRecovery.app it shows up on the dock but it nothing happens. I cannot quit the app only Force Quit. I have restarted the mac and that did't help.
    Adobe chat suggested I uninstall CS5.5/6 and re-install but why would that have anything to do with the app opening?
    Any suggestion is greatly appreciated, again.
    Thank you

  • Cloning a bad hard drive

    If this were a PC, I'd have no problem. But I'm not a Mac Tech.
    I usually back up my laptop's hard drive to an external hard drive using the Disk Utility. Has worked great, never had to restore from it.
    Now, the hard drive is begining to fail. So I tried to make one more backup of it, to save me reinstalling when I get the new HD. But the backup fails because of a file system error (file/dir does not exist), which is due to the bad state of the hardware.
    Now if this was a PC, I'd just use a utility to copy the drive, errors and all, which would be fine because then I could fix the problem once the data is on a good hard drive.
    But I have no such utility for my Mac. My PC utilities don't recognize the Mac file system, so I can't trust them.
    *So, how does one copy a slightly buggy hard drive using a Mac? Any tricks in Disk Utility? Tried it from the CD, same result. And other utilities?*
    I could just reinstall, but I just got this thing built just right a month ago!

    One Mac cloning utility that I like is Super Duper:
    http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    You can download it and do a clone of your hard drive for free. If you decide to register it, you can unlock other features.
    Another utility is called Carbon Copy Cloner. I have never used it, so I don't know much about it. I believe you can download and run it for free, and then make a donation if you like it.
    http://www.bombich.com/software/ccc.html
    I have never attempted to clone a bad hard drive, so I don't know how this would work.
    Good luck!

  • I am trying to install SC6 Photoshop and Bridge on a new Mac laptop.  Though I have the software the laptop doesnot have a disk drive so I copied it from my desktop and transferred it via a portable hard drive.  I get a message:  Configuration error. Peas

    I am trying to install SC6 Photoshop and Bridge on a new Mac laptop.  Though I have the software the laptop doesnot have a disk drive so I copied it from my desktop and transferred it via a portable hard drive.  I get a message:  Configuration error. Please uninstall and reintall...   Error 16

    Hi midtone,
    Is it possible to download the product? It seems that copying didn't work.
    If you can download then please use this link: Download CS6 products
    -Ankit

  • I would like to transfer my iTunes and photos etc from my PC to my new iMac via a external hard drive. Would somebody recommend one. I read that the Western Digital Mybook Essential 3.0 is good.

    I would like to transfer my iTunes and photos etc from my PC to my new iMac via a external hard drive. Would somebody recommend one. I read that the Western Digital Mybook Essential 3.0 is good. Though as Mac has 2.0 is this fast enough? I am a basic user, surfing only.

    If you plan on using the WD with the Mac after the iTunes transfer I would strongly recommend against WD. WD external HD's tend to be the most troublesome with Macs. If you intend to use the drive for backup using Time Machine or creating a bootable clone then I'd recommend a higher quality drive than WD. The drives I'd recommend in that case would be:
    OWC Mercury Elite Pro series
    LaCie d2 Quadra series
    G-Tech G-DRIVE series
    These are all high quality drives and enclosures with similar features. Personally I use the LaCie's however I would be happy to have OWC and G-Tech on my desk too. FWIW I've been using the LaCie's for 4 years and have 4 of them, all work perfectly and have never given me any trouble.
    You also my find this article helpful: Move an iTunes library from a PC to Mac (and back)

  • I copied my itunes library via an external hard drive. now when i connect my ipod to the new computer i can see my music but my apps are disabled

    i copied my itunes library via an external hard drive. now when i connect
    my ipod to the new computer i can see my music but my apps are disabled

    Here are the official Apple Support instructions:
    http://support.apple.com/kb/HT4527
    Ciao.

Maybe you are looking for

  • PROBLEM IN SERVICE PURCHASE ORDER STATUS

    dear cons   I am facing one problem i.e- When I created a  service p.o the p.o value was Rs.43082537 INR. I created service entry sheet of Rs. 42473812INR. The still to be delivered amount is 43082537-42473812 =608725 inr. That means the we will crea

  • How many iphones and i touches

    we have a family of 4. my wife has an iphone and i will have one when my contract is up in aug. we are getting an i touch for my daughter for her birthday, i already ordered it. someone my wife works with is saying you can only sync 2 iphones per i t

  • Is there a way to roll ab roll and cut between the two as in final cut pro which has multi clip

    Is there a way to AB roll as in Final Cut Pro which has multi cut

  • Jdbc impresser

    Hi! I had a problem in inserting the records in a table either in sql or access.Can anyone help me to do this. the query is insert into emp values('mamitha',20); plz help me mamitha

  • Several programs now giving errors after win updates?

    Problems: On boot my Razer Synapse mouse software gives an error & won't run Quickbooks will not run now, upon launch I get an error. Two Adobe CC programs run but every time I close them I get an error. (Audition & Premiere). Sometimes Audition cras