Questions re: calibrating a Thunderbolt and calibration problems
Is it considered "Normal" or "Wide" gamut?
Is the backlight "White LED", "RGB LED" or something else?
During calibration it tells me to set the brightness to within 4% of target. I can't. One notch of brightness control on a thunderbolt is a huge difference. The closest I can get is about 10% of the target (on the low side), one more notch of brightness overshoots the target by about 30% (maybe more).
I am trying to calibrate with a spyder4 elite and the included software. Maybe I have just grown accoustomed to looking at a display that's too blue but it looks way to oragne/yellow/red to me (too warm) even though spyder says it's calibrated. The calibration they came up with is only good for sRGB and I don't remember an option to use Adobe RGB but that's where I'm workign most. The graph for Adobe RGB and NTSC looks terrible.
I wish I had screen shoted the graphs but unfortunately I didn't. The point is only the sRGB looked like a good match.
Thanks.
I just got off the phone after an hour with Apple Support. The bottom line is that somehow iCloud has decided to use my .mac address as my Apple ID. Yes, I can change it, but if I do, I lose everything - contacts, mail, bookmarks, calendar - everything. For iTunes and this Community help forum, I will have to continue to use the insightbb Apple ID. They could not figure out how this happened, as for MobileMe, I ALWAYS used the insightbb Apple ID. Gremlins in moving from MobileMe to iCloud.
He did say that Apple is working very hard to figure out how to merge multiple Apple ID's as this is becoming more and more of a problem. So, until they sort it all out, at least I know what to do.
Similar Messages
-
Hp LaserJet CP1515n Printer Paper Jam, Cleaning Mode and calibration problem.
We have Two no. Hp Laser Jet CP1515n Printers,
We are facing repetatively the following problems.
Paper Jam, Cleaning Mode and calibration problem. even after hp has replaced that printer twice..
Pl. help me to sort out the problem.after 1 or 2nd page printing it display paper jam problem, after clearing the paper jam it goes in initialization mode. so we have to spent minimum 5 min. for taking one print out...
Pl. help to solve the problem.. -
I want to change my icloud id on my iPhone, but it won't let me now that i have upgraded. I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is valid. I cannnot delete the account because "find my iphone" wants the password linked to this old account. But when i go into the find my iphone app it is using my corect Apple ID. How do i fix this?
If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account. You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/). -
My MacBook Pro turns on but not all the way, it gives me an icon of a grey folder with a question mark in the middle, and won't go further that that. Anyone knows why, or what's the problem?
If these do not resolve the issue or if you are not comfortable with proceeding through these steps then take your Mac to an Apple store or an Apple Authorized Service Provider. An Apple store will perform these initial steps, diagnose the problem, and give an estimate for repairs (if needed). If the Mac is less than one year old or is covered by AppleCare any repairs would be free.
Genius reservation http://www.apple.com/retail/geniusbar/ .
or find an Apple Authorized Service Provider https://locate.apple.com/country -
I have an urgent question about my indesign. I had problems with the creative cloude app and then uninstalled it and then installed it again. Now it is not opening and I cannot download it again either. Pls give me help and advice if there is anything I can do to repair it
Please authorize ADE 3 with same credentials that you used with older version of ADE
-
I have installed Adobe Reader 11.0.07 for Mac OS 10.9.3. Have asked this question numerous time without results. The problems I am having are: I cannot scroll using the side slider on downloaded PDF files, nor can I fill in fillable files. Also, and this is extremely irritating, I cannot re-initialize the same file or initialize and another PDF file after I have initialized the first file. If you cannot help please let me know if should use an earlier version of Reader or find anther company that has the appropriate software.
Perhaps you missed that you started a discussion at I have OS 10.9.2 and have downloaded latest version of Reader 11. I can no longer fill in form or scroll using the side bar. and you did not respond to the last post there.
-
Hi i have i problem with my iphone and the problem is the security question i have forgot the answers
I understand German and Italian i littlebit EnglishYou need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106626) -
What will i do? ITune screenshot is as follows >
There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.Do what it said to do.
"Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. " -
There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store, click here.
Please help me i can aktivate my phone imei 012423006333181.There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store
no imei also -
HT5312 i forget my rescue account and my security questions how do i get around this problem?
i forget my rescue account and my security questions how do i get around this problem?
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
Can Thunderbolt and Firewire co-exist?
The question: Are there any known problems with using an external Thunderbolt drive and occasionally switching between Thunderbolt and Firewire800 (via the TB to FW adapter)?
More detail: I'm considering the purchase of a thunderbolt external drive as a backup unit for a NAS. The plan is to use the unit mainly on a Mac with a TB port. However, it would be useful to have the option to use the Firewire 800 to Thunderbolt cable if/when access to the drive must be done using a Mac with only FW800 port.
TIA.There should be no issues that arise from occasionally using an adapter or switching between FW and TB ports in that situation. Basically, the device is just looking for a way to send and receive a bunch of zeroes and ones. As long as you give it a way to do so, it's happy.
-
New Mac Pro with Thunderbolt and USB 3.0
it is exceedingly frustrating to be waiting with no surety that there will be an upgraded Thunderbolt and USB3.0 Mac Pro in the pipeline. professional doing advanced graphics and video need this and need it now and need for certain a time schedule to plan partial investment in new Equipment. Apple has let is down for two years now and surely the second largest corporation on the planet can afford the R and D for it and certainly it would cost the company nothing to let us in on this schedule. there is no real competition for this. it is not giving away any advantage but it certainly would give is some ammunition to prevent bean counters from instituting a wholesale move to Dell or others. We need some serious upgrading and we need a heads up on when.
The iMac would require a Magma outboard PCIx box that doubles the cost of the IMac and still does not do the job. that approach is a kludge to try to use an amateur user machine to do what a professional workstation can do, with The assorted updates I applied to my Mac Pro though it is not as fast at processing as the top of the line iMac it was much more flexible, can run many screens without having to buy new thunderbolt screens and with USB 3 and eSATA cards bypass reasonably the lack of Thunderbolt in the short term but it is a ridiculous and non Mac way to have to run,my work station. And..I am sure I am not alone...Apple better get their act together in the professional market or they will have kissed off many of is in another year.. that would be a huge pity. As well the iMac screen is insufficient and lacks a full Adobe colour palette and its incorrect black levels and inability to be controlled by such tools as a Huey make the screen good only for menus and control panels. that is why I still use the Mac 30 inch and also a Dell 30 inch screen as they can be calibrated accurately which the iMac can not. the only solution is a new Mac Pro. for the contributor who suggested I contact feedback already regarding this..I had done that but I figured that they must scan the discussion groups to find out what customers feel about user situations and the more responses to my comments the better the argument for new hardware.
-
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
I hate this Thunderbolt and I can't take it anymore!!!!!!!!!!!!!!!!!
I'm a POWER phone user (but I don't root or jailbreak). If I want to watch a Youtube vid, it had better come up. If I want to sream a radio station, it had better buffer and play, when I want to check something out on a website, it had better come up for me. Otherwise, why not just buy a basic phone? I can do all this other stuff from home. But I don't have TIME at home. I only have time when I'm out and about. So...if my phone doesn't live up to the hype, It just makes me all the more angry.
This Thunderbolt reboots all the time AND loses it's data connection, even after the update. I'm hoping Gingerbread OTA comes out today as planned.
But I have a theory as to why this is happening.
I think It has something to do with the networks and Andriod and isn't specific to VZW or the Tbolt. My buddy now lives in a 4G market and never has any issues. He's with Sprint and has their Droid X equivilant. His phone will rarely and only reboot when he's in this area (Kokomo, IN) and he just got Gingerbread and says it really improved battery life.
I drive 30miles one way to work. There are many routes I can take, but they are all rural. Kokomo is a hodge podge of crap networks. We're 3G, EV, 1x, etc. So nothing lasts long when driving as you'll drift in and out of the various networks all the time. And my phone will almost always reboot when I'm driving, and with no rhyme or reason, consistancy, etc. If it doesn't reboot (which I'm convinced isn't a heat issue either), it will at least lose it's data connectivity. Sometimes It comes back on, but most of the time I have to pull the battery. In the Driod forum, many others have said the same thing, and that a refurb replacement didn't help. So, I don't think it's the phone, but rather how Android handles networks.
I haven't checked... but do other Android phones reboot and lose data like mad? I was surprised when my non-VZW buddy told me his Droid X w/ Sprint rebooted yesterday. For a period of time after the last update, my data connection was fine, but rebooting startedh happening all the time. I don't think my phone rebooted once prior to the last update. My iPhone friends never talk about any of these issues... or any issues to be honest.
Which brings me to this... I was so excited to get this phone. It was my first Droid phone and I chose it over the iPhone only because I had plans on getting an iPad 2. I already have an iPod Touch. So I am stacked full of app's. If I'm in a 4G area, (which is hardly ever), the phone seem to peform fine. I came from a Blackberry Tour 9630, which I thought was the worst phone ever. But this one is JUST as bad, and one of the worst decisions I've made in a long time. I love many things about Andriod and this phone, but I spend more time in forums looking for solutions, (while holding back the desire to smash the phone to bits), than I do using it. I basically dream even using the phone anymore because it will always infuriate me at some point. One more ill-timed reboot is going to make me snap (It's not like my Blackberry, but not exaclty a fast booter either!).
And what stinks is that I'm stuck with it until the end of 2012! Plus, I've invested in an extended life battey and a skin. It's annoying how few aftermarket products are avail for this phone to be honest. Battery life is dreadful, so an extened battery is a must. God forbid Otterbox release a case that fits an ext life battery too. It's not going to happen. So, I'm stuck wiith skins, which is fine.
Also, the charge jack is located in the DUMBEST spot ever. Do you think I'll ever see a good cradle that allows me to watch movies or whatever in landscape mose while charging? I bet not. Yes, I know they make some, but none are any good. I quite simpley I hate this phone and regret buying it. I've been with Verizon for a LOOOONG time too.
I went to the local store, and they are all really cool and nice, but acted like I was supposed to live w/ the reboots and loss of data. Someone there always grabs the phone and checks it out, making sure the settings are correct, and hands it back. I want a phone that works!!! God forbid they let me get a different phone. I'll even pay my insurance ded of $99 to get out of this phone.
If I call tech support, they are going to want to do my SECOND hard reset, which is a pain to get up and running again. My gmail addy book is dialed in, so I'm good there. But a hard reset won't work, because it doesn't work for anyone else. A refurb phone will do the same thing, and so will a new. Besides, I bet half of those refurbed phones are from rebooting problems anyway! If I march down to the VZW store, they'll tell me to wait till the OTA update hits to see if that works, which it might. But I've read that people who have rooted their phones and got the update say it's better, but still has some issues and quirks. I've been trying all day to get the update, but I bet that they haven't even released it. I need to check. Last time I got an OTA update, I had to get it in the middle of the night.
My point is.... i'm in cell h--- in this area. We are a 3G city, but if you go any direction out of the city, you start getting into to Centennial Wireless territory, and they are a giant thorn in the side to all major cell companies. They won't let go of a particular area and because of it, Kokomo will likely have ghetto 4G. At least for me, because I'll be far away from the tower. Plus, I live on the south edge of town. So, as I travel south to Indy, I'll have weak 4G, and then get into North Indy's weak 4G until I get closer to the city. Then it's FAST!! Good 4G service is unreal. I'm just regurgitating what a VZW rep told me. I'm just repeating it all back with some "hatred" mixed in.
So, I don't know what to do. Call Tech Support? Beg for a refurb that likely won't work? I could file an insurance claim since I have a legit reason. Sweat got under the display and won't go away. It's not bad, but it's not perfect. The people at the VZW store told me that I really need to get a Bluetooth headset, esp if I sweat a lot. I also put the phone in the crook of my neck a lot and talk while working. This almost always hangs up the call. Very irritating!!
They also told me at the store that if I go thru Insurance and pay my $99 ded, I MAY have a chance to talk them into letting me get a different phone of equal or more value but i'll have to really sell the idea. And if so, I'm going iPhone 4. Period. I don't think it's necc better than my Tbolt, but it's reliable, I have tons of app's for it already, and I'm a Mac user anyway. It just makes sense. Otherwise, there is NO CHANCE i'll be able to talk VZW into getting me out of this phone, even though none of these issues were present while I had the return policy. Only after did it start to do all of these weird things.
It sounds like I'm complaining about the Tbolt just to get the iPhone and I'm not. I'm upset because using my phone is a horrible experience as it's either slow, has a horrible connection most of the time when I'm driving, and is only useful on Wifi. Maybe a different phone will be no better and I'm just cursed to live in a bad market? VZW was supposed to the be the best though, so switching probl won't help me.
Not sure what to do exactly... so I will probl wait to see if anyone has any suggestions. I hate to be so negative, but I'm likely SOL, and that's really sad. VZW has been very good to me over the years, but i don't see how this will end well for me.
Jasonjpoprock1 wrote:
You know something ironic? I tried to respond to this using my Thunderbolt and the stock browser, and I couldn't type anything in this box! HA!! I'm doing this from the web.
Anyway, doing the *#*#4636#*#* thing did the trick. I'm now running CDMA (PRL), and only have had one reboot in two days. Usually I would have like 10. This totally confirms that it's something with the brains of the Tbolt that can't handle hand-off's on non-4G networks. In fact, in the past my phone would be in 3G mode, then when a 1x handoff needed to happen, my phone would either not hand off to 1x at all, or it would simply LOSE it's data connection. I watched my signal on my trip home yesterday, and it would easily switch in and out of 3G and 1X. As I said, I'm in "cell hell" here, so I bet I change from 1x to 3G at least 4 times in a 30 mile radius either direction.
So, for VZW store employees to tell people we'll be 4G before the end of year, is just a ploy to cell the new phones. Even if Kokomo goes 4G, it's only good if you never leave town! If half the state is still 1X, then what hope is there that most places will be 4G?
I don't understand, outside of sheer cost, what the problem is making 1x Towers 3G or 4G capable? Are these towers privately owned? Is it up to the owner to fork over the money? Why would they do that for the convenience of minority 4G users if 1X and 3G works "Ok"? It should be manditory. And there are towers ALL OVER THE COUNTRY, so I can only imagine the expense involved. But still, these companies have a responsibility to stay current. Otherwise, someone else will come along with a totally dialed in network and they'll lose business. I'm starting to think VZW is getting so big so fast that they can't keep up.
verizon has the largest network. they have the fastest network. what more can they do? yes, they focus on major markets, but that's because that is where they make money. they aren't a public utility. they are a for profit corporation. their coverage speaks for itself. they pay WAY more attention to the rural areas than any other carrier.....but it's just bad business to throw ten towers in a spread out rural area that will cover a few thousand people....when they can use 9 of those towers in an area that will cover 200,000 people. their LTE network is 10 times faster than sprint's "4g" and they are banking on domintaing the market with it, just like they did with 3g. keep in mind that they launched the first LTE areas only 6 months ago and this is still very new technology.
for the record though, i mostly keep mine in 3g right now, as it is much better on my battery. i switch it to 4g if i'm not near wifi and want to browse or download something. i'm in a strong LTE network and i do believe this LTE network will blow the other carriers out of the water. my 3g incredible speed tests at the same rate as my friends' EVO's on sprint's "4g" netowrk. (just under 2 mbps). no reboots, but i didn't install they update back in may. -
Hi,
I'm planning to buy a thunderbolt display.Since I have not only apple computers with a thunderbolt port I wonder if it's possible to connect my mac book pro via thunderbolt and a DVI switchbox via a "mini displayport to DVI connector" to the thunderbolt display at the same time. Thunderbolt is a bus architecture. Thus there must be an ingoing and an outgoing port on the display. The rearview of the display I've seen so far don't show this:
If this is not possible then I must question the market chances of this product. Seems as if the product marketing guys exaggerated the launch of the thunderbolt technology.
-ais-swissais-swiss wrote:
How to connect windows laptop (vga) to thunderbolt display?
AHHH??!!!!!! Was that your original question?? I assumed you were trying to output FROM your computer (MacBook Pro w/ Thunderbolt) to the new display and then OUT to be the video source to a DVI switcher.
MB Pro w/TB ---> TB Display ---> mDP-to-DVI adapter ---> DVI switcher
So it seems as if it's not possible to use the thunderbolt display with the mini display port adapter to DVI you've mentioned.
I did not understand that you were trying to use other PC's into a switcher and then THAT Video source to connect INTO the TB display. If THAT is what you're trying to do, then NO.... You can NOT use the new TB Display to be used to display "FROM" a DVI switcher (and also can NOT be used to display from other Non-TB-Apple computers).
I've also called apple. The statement was that one needs a computer with osx 10.6.x in order to connect the thunderbolt display. That makes it impossible to hook a windows pc or older mac to the new and shiny thunderbolt display.
I wonder why apple doesn't state this in their technical descriptions...?
-ais-swiss
Actually, the state that information all over the Tech Specs on the Apple Store website.
http://store.apple.com/us/product/MC914LL/A?mco=MTY3ODQ5OTY
Here are two different statements from that webpage:
So yes.... other NON-Apple PC's (or non-TB devices) do Not have the Thunderbolt technology (hardware/software) to be able to communicate with the TB display or other TB devices. -
My complaints and Questions MP4 M4V video files and other complaints
My complaints and Questions MP4 M4V video files and other complaints
I have been scratching my head as to how to fix my problem and I found some answers and some questions along the way. First of all, I have a video that should be correctly formatted for my iPod. Its specs are:
Kind: MPEG-4 video file
Size: 19.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 12:25 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 360 kbps
Video Dimensions: 352x264
Video Codec: H.264
F:\File\AnotherFile\A3rdFile\TheMovieFileInQuestion.mp4
Wow that was a chore. Apple! Let us drag copy and paste our info tabs information so we don’t have to type all this stuff when we are having trouble. **another problem and suggestion** right there.
Ok, back to the problem of the forum.
From what I can see from http://www.apple.com/ipodclassic/specs.html this file falls in line of everything required in order to be able to play on my iPod. It plays in iTunes fine but will NOT sync with my iPod. I get an annoying message that states, “Some of the Songs and videos in your iTunes library, including “BlaBlaBlaiPondFixYourJunkBlaBlaBla”, were not copied to the iPod “My iPod” because they cannot be played on this iPod.” Why oh why can iTunes play this video file but my iPod cant. Especially when the specs on Apple’s website say it can.
So that was bugging me for a LONG time until I found my “Create iPod or iPhone version” option in the “Advanced” heading. Thank goodness this made my files playable on my iPod. Extremely LONG wait though. I know that other programs convert it in ½ the time. But times not to important as long as it gets done, (would be very convenient if it was faster though **Problem and suggestion**)
Ok, now that I have used the “Create iPod or iPhone version” option it has slowly but surly converted my video. Ok, here is my main problem, the new file which is the result of the conversions information is as follows:
Kind: MPEG-4 video file
Size: 35.4 MB
Bit Rate: 125 kbps
Date Modified: 8/18/2009 2:15 PM
Play Count: 1
Last played: 8/21/2009 1:28 PM
Profile: Low Complexity
Channels: Stereo
Total Bit Rate: 658 kbps
Video Dimensions: 352x264
Video Codec: H.264
C:\File\WhyIsThisNewFileInMyMusicFolder\TheMovieFileInQuestion.m4v
So basically it has made my file bigger *not a bonus in my book* greatly increased my Bit Rate *another interesting feature*, and I think the biggest change it has changed it from an .mp4 to an m4v.
Why does it need to be an .m4v I could have sworn some of my videos were or are in mp4 which shouldn’t matter anyway because I was under the impression that iPods could play mp4 files. So that’s my biggest complaint and question. Why can my 80GB classic iPod not play my MP4 files and why am I forced to convert them??
This conversion also creates 2 files in iTunes when I am done which is annoying because I have to go into my files info and look to see what file is the mp3 in order to remove it. Very annoying I can open my iPod options and see the files and some are faded (the ones it can not play) why can’t I remove them from that area.Suggestion Apple please make files that cannot be played on my iPod stand out some how for easier cleaning Suggestion. Thank you.
Speaking of cleaning iPods, when I moved my entire library to an external drive I was faced with a terrible problem. “This file could not be found, would you like to locate file”, I was faced with this annoying message at least 600 times. Now I am glad that iTunes has a little “!” mark to show dead links so that you do some minor cleaning, Good Job iTunes No compliant there. However iTunes has no way of selecting all the broken files for major cleaning (like in my case). Going through and deleting over 600 files 1 by 1 is extremely time consuming and annoying. **Suggestion Apple please add more cleaning features for organizing iTunes**.
Ok, speaking of organization now, another problem that appeared when converting my video files was that it put my new videos into the location where I have all my songs (my external hard drive) why can’t it put the new files in the locations of the original file? I have my computer highly organized and my original files were in that drive in that folder for a reason. If I could open my original file and skip the conversion, my iTunes would go to that specific folder to access the file which is fine. But now these new conversion files are elsewhere taking up space and disorganizing my computer. True I can go into the new location and move the files to where I want them (original location) but I don’t think I should have to hunt them down, copy, move, delete ect etc for all these files over and over. Very annoying, time consuming and should be unnecessary. **Suggestion Make file creation and location more customizable, and user friendly, your customers will love you for it**.
Well since I have gotten into Apples iTunes and iPod problems that I have had to face I might as well bring up one or two more problems and suggestions. About a month after purchasing my iPod a sibling bought one as well. His however is way more convenient then mine. I suppose he has a 5th gen. so here is my question: why does he have a search option and I don’t!!!! Why does he get more features every so often and I don’t?! Why can’t Apple write some software for us classic guys which got the iPods going! It’s very annoying when I have to spend more time looking for the song then I spend actually listening to it, when he can pull his up in like 3-6 seconds? I highly doubt the hardware between our iPods is that dissimilar and even if they are why cant software be written for us. **Suggestion treat all your customers good not just the newer ones, and make some more features for the classics like me and my iPod.” We will be grateful for it I promise.
Ok, I am almost done. Let me just recap my questions, I know my post is kind of lengthy.
#1. Why can’t my iPod play MP3 video files? And why do I have to convert to almost all the same settings except changing it from an mp4 to an m4v. according to Apples own site I should be able to play .m4v .mp4 and .mov files!! Note: remember iTunes plays them fine but my iPod will not.
#2. Would be much more convenient to be able to copy the information from the windows in iTunes so that problems and trouble shooting would be much easier. A little check on off options in iTunes advanced settings would be terrific.
#3. Why is the conversion so slow? Please speed it, you have the power. Convenience is the thing that sells products.
#4. Files that cannot be played on the current iPod need to be easier recognized for simpler cleaning.
#5. Also make an easier way to select all dead link files for faster cleaning, deleting, etc. This one is important.
#6. Make a user friendly way to change where my files are going to end up once I convert them for iPod more options and better customizable settings are need.
#7. One of the most important is ADD A SEARCH OPTION. I and we classics will LOVE Apple for it.
For you readers, I apologize for the long post, and any grammatical errors you might find throughout it. These are problems that I have faced with these programs and hardware and I wanted to make sure they got acknowledged and hopefully addressed. Any information about why I cannot play MP4 Video files on my iPod would be the best. If anything in my post gets answered that’s the one I want most. Will save me a lot of hassle.
Thank you all and I look forward to your suggestions and comments. All are welcome and appreciated.
Sincerely,
Bond, JamesWas playing with iTunes and thought of another suggestion! Let us play files in iTunes from an iPod! A friend or sibling should be able to plug his iPod into my computer open iTunes and play any of the files there. Many times I have wanted to show a movie clip or video to a friend, and I have the dock so I can do it on my T.V. but play it on their computer in their iTunes forget it. That would be a very nice feature as well so we can watch our movies at maximum size or listen to music on a better sound system, just another suggestion that would be nice. Thanks
Maybe you are looking for
-
Since in the Pictures and Videos section i didn't received an answer... After installing Amber i can't open the old Smart Shoot pictures anymore. I've checked and even if the photos and the linked .NOP files are there (on the sd card) the option to
-
Purchase order sapscript version number
Hi friends, I am customizing a medruck sapscript form. One of my requirements is to get the version number on the form when it is changed. Can you tell me what field gives the version number of the form? I tried with 'revno' field but no luck! Thank
-
My ipod touch has entered restore mode, but when I attempt to restore it I get the error code 1604.
My daughters ipod touch has entered restore mode, but when I attempt to carry out a restore I get an error code 1604. Any easy solution to this problem?
-
Does anyone know of a way to edit caf files? I got some caf files from the web and I want to change it to make the volume louder. Are caf files like mp3 files where I can just run it through some encoder and change it's properties (like volume etc)
-
My MBPro is currently being repaired with AppleCare. I called to get an update on when it would be returned and they told me that they couldn't give me a date of when it would be completed. They said they need to locate a logic board for my laptop.