Questions regarding HR Org Structure replication from ECC to SRM

Hi Experts ,
We have SRM7.0 ( SP08) with ECC6 ( Ehp4) having Classic Scenario .
I managed to replicate entire  HR Org Structure  from ECC system to SRM system.  I replicated O (Organization), S( Postion) and P ( Person), which successfully created O, S and CP in SRM with BP for O and US...Refered Note 934372, 312090, 550055 and help link on SDN./wiki.....etc
Now I have below questions in mind.
1. In SRM we requiers Org unit for Company Code, Purchase Organization and Purchase Group...which we set  in FUNCTION tab for the requiered Org Unit with Checkbox and value of it and Logical system.....but in HR Org strcuture we do not have such Org Unit....so how to manage/create such these Org Units ( i.e.Company Code, Purchase Organization and Purchase Group ) ?...
Do I need to create these Org unit manually in SRM in PPOSA_BBP ? If yes, can I create these Org Unit above or between these replicated HR Org Units  or I need to created it separtly in paralllel to these HR replicated Org Units?
2. If above I do, then what will impact on the delta /change replication from HR integraion ?
3. In ECC HR org Structure there are hundres of employee, out of that I just wanted to send the Postion ( we have postion based security  in HR) whom only SRM Role had assigned . How it can be acheived ?
Will appricaite detail reply/suggestions
Thanks
NAP

Hi ,
Initially when I repliacted P of HR Org Struture it sucessfully craeted BP in SRM  and was CP in Org Structure.
But suddenly , what happned don;t know, when I replicating Employees (P) in SRM , it is assigning  to respective Postion (S), but BP is not creating in SRM  and in the USERS_GEN  for this User, its postion and ORg Unit to whom it assigned is giving  below error
Determination of connections to object 'BP' of 'CP' '00000015' failed
Message no. BBP_UM_UI036
I checked all this as per Note 550055, 934372..etc....checked respetcive setting in table T77S0...I checked address alos....but no any clue......IDoC in SRM posting sucessfully....
Can anyone please suggest what should be the cause and solution of it ?
Thanks
NAP

Similar Messages

  • Delivery address replication from ECC to SRM

    Hello All
    We are onboarding a punch-out vendor in SRM. The Vendor said that they won't read the delivery address sent by us in the PO output, but would rather pre-store all the delivery addresses and their codes.
    The code would be auto read & this way they can ship immediately with just 1 day lead time.
    We are using classic scenario and noticed that when the PO is created in the backend, it always creates a new address number each time  , even for the same address.
    We are mulling about a process where the Ship to address would be created in ECC and replicated to SRM , with the same number as ECC.
    So my question is :
    1) Is it possible to replicate the Addresses from ECC to SRM using any report or ALE?If yes what is the process for the same.
    2) Can we maintain the number range of the Ship to address object in SRM as external, so that ECC and SRM has the same #s.
    Thanks
    Kedar

    Hi Kedar,
    1) Is it possible to replicate the Addresses from ECC to SRM using any report or ALE?If yes what is the process for the same.
    Ans : You can create delivery address in SRM from ECC by creating a Report and Utilizing RFC function module to read address
    data from ECC and creating the same in SRM through FM BBP_BUPA_ADDRESS_ADD [i hope the FM  is correct as i do not have the system now].
    I dont know of any standard interface though ....
    2) Can we maintain the number range of the Ship to address object in SRM as external, so that ECC and SRM has the same #s.
    Ans : Does not  look possible to be .. since there are amny type of addresses in the system all uses the same internal number range.  You can utilize some of unused field in delivery address to store the address number of ECC system like  Building code , Street_suppl 3 etc ...
    However i suggest do not make things complex and keep it simple.
    Cheers
    Iftekhar Alam

  • Material replication from ECC to SRM

    Dear SRM 7.0 Experts,
    We are implementimg SRM 7.0 and we are trying to execute the Initial Load of materials into SRM 7 from ECC. We have completed all the Middleware settings and all the customising required for material replication. Whe we run the initial load (tcode R3AS) and select the first object DNL_CUST_BASIS3, it runs but the status remains "Running" in R3AM1. There is no errors in SMQ1as the entry runs and completes and therefore disappears. There is no errors recorded in SMW0 or SLG1 either. What could be the problem?
    I checked in SMQ1 & SMQ2 as well, but there is no entries here for the object DNL_CUST_BASIS3. what we can do to resolve the issue ?
    Regds,
    Cb

    Have you checked the outbound queue in backend R/3 system  ?
    Have you defined the additional user in CRMCONSUM table apart from the CRM user? 
    Verify and, if necessary, change or insert entries in tables CRMCONSUM and CRMRFCPAR as
    described in SAP Note 430980. See also SAP Note 720819.
    Hope this helps you.
    Regards
    Abhijeet

  • SRM Org Structure Replication From HR

    Dear All,
    We are in the process of Integrating the HR org into SRM.
    1) Done the ALE settings.
    2) Model view for message type HRMD_ABA created and distubuted, created from the template.
    3) Basic settings done in T770s in SRM table.
    4) Executed PFAL to push the objects.
    5) Idocs generated in the SRM to create only Org units and positiosn,But  CP and users are not created.
    Outcome:
    Org units and positions are transferred to the SRM, but the CP and User assignment not done in SRM.
    HRALS-USRAC = X. Not sure why the CP and USer is not assigned.
    With this setiings I think we need not create users in SAP, as the user info from HRinfo type 0105 , Stype 00001 should be copied on to create CP in SRM
    We are in SRM 7.0 with ECC 6.0.
    Pls advise.
    Regards
    Harish

    Dear Customer,
    This inquiry would really fall under the BC-BMT-OM-ALE component. It might be best to open a thread under this component.
    Information i have found for you on this is as follows. I hope it might help you a bit.
    This issue occurs because the intial distribution has not been done
    correctly. Please review the way to distribute HR datas :
    1- Using transaction PFAL, sending the objects C, O, S successively in
       Update mode with the infotypes 1000, 1002 and 1028 only, without
       using evaluation paths (all existing objects).
       => The objects will then be created without relationship, and no
       error must be reported.
    2- Using transaction PFAL, sending the object P in Update mode.
       => As the structure objects are already present, no error message
       must be generated. If some are, please analyse them, and correct them
       before the next step.
    3- Using transaction PFAL, sending the objects C, O, S successively in
       Update mode (without restrictions, or only the infotype 1001).
       => The relationships which were not sent in step 1 are then
       distributed.
    4- The changes pointers can now be activated and processed, as the
       initialization has been done (steps 1 to 3).
    Hope it helps,
    Kind Regards,
    Edel.

  • Material Replication from ECC to SRM 7.0

    Hi Experts,
    I am working on Extended classic scenario SRM 7.0 with ECC 6.0, I have created the Material Group and Master data in ECC system. While doing replication via R3AS i am getting the following error msg( I have applied Note 720819 & 330401in ECC ).
    Errors:
    Hierarchy for material types does not exist
    (Before materials are imported from the ERP system, the material types from the  ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).)
    MATERIAL: Object will not be loaded
    Pl do the needful.
    Regards
    Mohan

    Hi  Pl check whether you follwed these steps are not.
    Hi find below for the product cat
    Steps to create the product category in SRM:
    1) Create MM material groups in ECC client. This will create a transport. Go to SRM Tcode R3AS and select the object u201CDNL_CUST_PROD1u201D from the list and run it. You can monitor the job using R3AM1 in SRM. This will bring the material group into SRM. This can be seen in TCode u201CCOMM_HIERARCHYu201D in SRM.
    2) Once it is done. Go to IMG in SRM and go to path SRM> SRM server> Cross app biz settings> Account aassigmnet> Define GL code for Acc *** Cat and Prod Cat. Maintain the GL code against this prod cat for all the account assignment codes. This is client specific setting and need to be done in every client by opening it. This GL code is given in the form in ticket.
    3) Do a test and check if the product category is available for procurement in SC.
    Regards,
    Satish

  • Material Group Replication from ECC

    Dear SRMers,
    System Landscape : ECC 6.0 and SRM 5.0.
    I am doing a material group replication from  ECC to SRM using the DNL_CUST_PROD1 customizing object. Before the replication ECC  was trying to confirm the target RFC destination(SRM) by prompting a logon. I logged in as myself and  the system gave a CALL_FUNCTION_OPEN_ERROR.
    I defined the CRM Consumer as SRM in the CRM middleware parameters..
    My question is do we need to define the User SRM in SU01 and when ECC tries to confirm the target RFC destination, do we need to login as the SRM User ?
    Points will be rewarded for answers.
    Thanks in advance,
    Bob

    Hi,
    The RFC user which you define in the SRM RFC detsination has to be obviously as SU01 user in SRM.Also the RFC user need to have SAP_ALL and SAP_NEW profile attached.See note 642202 for details.
    Also Check:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/84/d3eb4190966024e10000000a1550b0/frameset.htm
    BR,
    Disha.
    Pls reward points for useful answers.

  • No Range for CP in SRM 7.0  in case of ECC HR Org Structure replication

    Hi Experts,
    We have SRM 7.0 , in case of ECC HR Org Structure replication, where we maintan the No Range for CP  ( Employee replicated from ECC) in SRM ..I belive it is External ( In ECC it is at PA04 for Employee )?
    Thanks
    NAP

    You need to schedule program RHALENI in Insert mode to achieve the same
    Thanks,
    Sundeep

  • HR org structure replication to SRM

    Hi All,
    we have done HR org structure replication to SRM, and we found that ORG structure replicated successfully in SRM . We can see it in PPOSA. But we found that Business partner number and Central person is not created for this.
    I have followed steps given in this link.
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30139fb0-360c-2a10-1e9f-9d5417754983
    When I check IDOC it is posted successfully, when I check segments in IDOC in SRM  it is showing personal number of HR, but it is not converted to Bussinesspartner and central person.
    Any pointers
    Thanks and Regards,
    Abdul Raheem

    Issue is resolved by SAP, some customizing entries are missed from ECC side

  • Replicating authorization roles via HR replication from ECC 6 to SRM 5.0

    Hi,
    I'm interested in knowing whether anyone has used the distribution model to copy roles (AG objects) between ECC 6 and SRM 5.0.
    Someone said that it's possible so I would like to validate that statement as I don't know whether it is possible and practical.
    If you have any knowledge or experience could you please share it?
    Regards,
    Jerry

    Hello Yann,
    I was told that it can be done but I don't know enough about the HR replication process to acknowledge or challenge, hence the question.
    Are you implying that it's not possible or simply that it's not done?
    I had an earlier post regarding assigning roles to positions in SRM Replicating authorization roles via HR replication from ECC 6 to SRM 5.0 that you replied to but never replied to my subsequent question. It can be done because one of my other clients is doing it. We're however unable to get it work at my current client's site. Do you have any experience with this subject?
    Regards,
    Jerry

  • Replication of hierarchical levels labels from ECC to SRM

    Hi Gurus!
    I am working on SRM 5.0 in Classic scenario and ECC 6.
    We are trying to replicate data from ECC to SRM in order to retrieve the same organisational structure as the one existing in ECC in SRM.
    We succeed in replicating hierarchical levels from ECC to SRM, indeed we retrieve data of infotype 0001 employee subgroup in table HRP5581-PERSK. But we did not retrieve labels of those subgroups?
    Have we missed to customize a filter in tx BD64 in ECC? Or the problem is just that data replication does not send hierarchical levels labels from ECC to SRM?
    Please help!!
    Thanks a lot.
    Regards,
    Morgane Chevallier

    Hello all!!
    Any idea on the subject??
    Please help!
    Regards,
    morgane

  • Operation Issues after switching to Org.Struc. replication from HR ? :-(

    Hi guys,
    Currently I have my Org.Structure created manually, however some guys are working in the ALE model in order to replicate Org.Struc. data from HR to SRM.
    MY QUESTION IS: my new Org. Structure will have different ID's. 
    - What will happen with my current operation?  I can see that all my SC and PO documents are linked to the "old" struc. ID's.     
    - What should I do in order to minimize the issues during this transition ?
    Thanks for your help !
    Best regards,
    Diego

    Hi guys,
    Thanks for your help.
    First of all: YES I need to accomplish this in my Productive Environment.
    Second: I have 1800 end users approx. right now, so it would be difficult to ask them to finish the approvals by themselves =(
    Third: my biggest concern was related to the Purchaser workload, I have seen in BBP_PD that a PO document has a Purch.Org and Purch.Group linked (OU Id's).     With my new Org.Structure this ID's will be a different ones !    How could I solve this ?
    Thank so much for your help !
    Best regards !
    Diego

  • HR Org Structure Replication

    Hi,
    Whenw e replicate the HR org structure to SRM, how purchasing groups and purchasing organisations are taken care of.
    Thanks.

    Org replication from HR to SRM works fine. You need not create everything in SRM again.
    You need to use transaction PFAL
    Please refer to this blog
    /people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1
    Regards
    Azad
    Edited by: Azad Tripathi on Aug 11, 2009 8:18 AM

  • Org Structure download from HR and Uploading into SRM

    Dear All
    We have SRM 7.0 and ECC 5.0.
    We are trying to load ORG structure data from SAP-HR into SRM. These 2 systems are not connected and we can't use the ALE synchronously. Can we download the HR org structure - ALE Distribution- iDoc into a file from the SAP-HR  System and then upload the same into SRM, to create the entire Org structure? Pl provide your inputs.
    Thanks in advance
    velu

    Hello,
    Did you use any evaluation path to capture org structure when download the file using PFAL program.
    We are looking to capture O,S,C objects ie HRP1000 objects as first step.
    We are looking to capture all relationship belonging to that ORG unit ie HR1001 relationship as second step.
    Any thoughts?
    Thanks.

  • Transfer of PR from ECC to SRM

    Hi experts,
    I am new to SRM & my questions can be bit easy. We have implemented PDP & while transferring the PR from ECC to SRM, the PR got stuck in sxmb_moni in SRM. Now when i  see the error /sappo/ppo2 it shows "cannot save template: Insert Items".
    I have checked the Org. Structure and i think the attributes defined to the RFC_USER is also correct because i can create the shopping cart without an error from this user.
    So please help me.
    Thanks & Regards
    Himanshu singh phartyal

    Hi,
    Would you please apply note 1821480 and retest the issue with a new PR?
    Regards,
    Ivy

  • No Business Partner generated for new employee transfer from ECC to SRM

    Hi All,
    I am working on SRM 5.0 with ECC 6.0 backend. The HR structure is replicated from ECC using ALE, message type:HRMD_ABA.
    When I am trying to replicate a new employee from ECC to SRM, I run the O-insert first, then the S-insert and then the P-insert using PFAL transaction.
    The Org structure was already in place in SRM, so it just adds the new position to it by A003 relation. The S-insert generated idoc shows status as '53' in both ECC and SRT with the relation A003, B007 and A008. But, when I check the table HRP1001, the A008 entry is missing. Due to this, no CP is generated for this position and also no business partner is generated for this user.
    When I run the P-insert for this employee, the idoc is posted in ECC. But, the status of the idoc in SRT is '52' and the message shown is "The Parameter Country Has Not been Entered During Naming Format Check" Message No. R11206.
    I checked the Name Format for this employee, and it is maintained as 2.
    Where am I going wrong? Why is no CP person generated even when the idoc status is 53? Why isn't the new employee getting transferred to SRM server?
    I have checked the SAP notes related to HR-ECC Org transfer, but I am unable to figure out the reason for this problem.
    Could anyone help me out in this?
    Regards,
    Ancy

    Maintained the name format tables (SA13)on ECC and SRM side.

Maybe you are looking for