Questions regarding iPhoto '08 and Elements 9

I would like to use iPhoto as my organizer and Elements 9 as my editor. My selected photo moves from iPhoto to Elements when I choose 'Edit', but I don't know how to move the photo back to iPhoto from the Elements editor.

Hi Barbara,
I went to PSE Preferences and changed the Saving Option to Save Over Current File. The photo did go into iPhoto in the edited version. I checked the library and the original is gone, just like I specified. This is all well and good IF I don't ever want the original version. Can it be saved without Deep Sixing the original forever (and still have it go to iPhoto upon saving it)? (Can I have my cake and eat it, too???)

Similar Messages

Quick question regarding best practice and dedicating NIC's for traffic seperation.

Hi all,
I have a quick question regarding best practice and dedicating NIC's for traffic seperation for FT, NFS, ISCSI, VM traffic etc. I get that its best practice to try and separate traffic where you can and especially for things like FT however I just wondered if there was a preferred method to achieving this. What I mean is ...
- Is it OK to have everything on one switch but set each respective portgroup to having a primary and failover NIC i.e FT, ISCSI and all the others failover (this would sort of give you a backup in situations where you have limited physical NICs.
- Or should I always aim to separate things entirely with their own respective NICs and their own respective switches?
During the VCAP exam for example (not knowing in advance how many physical NIC's will be available to me) how would I know which stuff I should segregate on its own separate switch? Is there some sort of ranking order of priority /importance? FT for example I would rather not stick on its own dedicated switch if I could only afford to give it a single NICs since this to me seems like a failover risk.

I know the answer to this probably depends on however many physical NICs you have at your disposal however I wondered if there are any golden 100% rules for example FT must absolutely be on its own switch with its own NICs even at the expence of reduced resiliency should the absolute worst happen? Obviously I know its also best practice to seperate NICs by vender and hosts by chassis and switch etc

Question regarding the "mcxquery" and "dscl -mcxread" commands:

Question regarding the mcxquery and dscl -mcxread commands:
Does anyone know why the mcxquery and the dscl . -mcxread commands don't show any info about MCX managed login items & printers? The System Profiler's "Managed Client" section does. Id like to see info regarding managed printers and managed login items using the mcx tools. I have Mac users running 10.5.2 with both login items and printers that are pushed out to them via MCX. The System Profiler app shows all of their policies, but the dscl . -mcxread and mcxquery tools dont. Why not?
-D
Message was edited by: Daniel Stranathan
null

How do you "call procedures/functions" without sql code? You need at least the call statement like
{call myProc(?,?,?)}that you wrap into a CallableStatement.
Other than that: when you switch off autocommit, you need to call commit/rollback at the end. Usually, if you don't commit/rollback a non-autocommitted connection, the transaction get's committed/rollbacked when you close the connection - that depends on the JDBC driver. But it's never a good idea to ommit the commit/rollback calls on a non-autocommit connection. Usually you enclose your code in a try/catch block like this:
con.setAutocommit(false);
try {
   con.commit();
} catch (Exception e) {
   con.rollback();
} finally {
    con.setAutocommit(true); //or:
    con.close();
}

Few questions regarding Oracle Scorecard and strategy management.

Hi,
I have following questions regarding Oracle Scorecard and strategy management:
1. What are the ways in which i can show status of a KPI, like we have colors and symbols, what are others?
2. can we keep log of KPIs, store them, keep report of feedback/action taken on that?
3. Does Scorecard and strategy management have ability to retain history on feedback and log of
entries i.e. date/time, user name?
4. Does Scorecard and strategy management have ability to use common mathematical formulas e.g. median, average, percentiles. Describe.?
Thanks in advance for your help.

bump.

IPhoto 11 and Elements 10.

Just installed iPhoto 11 and Elements 10. iPhoto does not show Elements as an external editor choice in the Preferences > Advenced pane. Only iPhoto and Preview are listed. There seems no way to select another application. What am I missing here? (iMac with 10.7)

You click on the previously selected external editor (Preview in your case) and then select the new external editor
LN

I got a question regarding running iOs and Windows using virtual software.

Greetings!
I got a question regarding running iOs and Windows using virtual software. I recently bought a monitor so I can display Windows on it and run both OS at the same time.Now,I'm using BootCamp. I downloaded VirtualBox for "tranferring" Windows on it. Since I'm a new iOs user , what do I need to do in order to make work?
Do I need to un-install Windows from BootCamp,install VirtualBox and then install them again?
Any information would be appreciate it!

That should work to use OS X, you can run MS Windows using Virtual Box and use a seperate display for the Virtual Box window. That way you can run OS X and MS Windows simultaneously. However remember Virtual Box is freeware and not a commercial application like Parallels or VMWare Fusion and may not have the features of a commercial application. Support for Windows run in any virtualization application (Virtual Box, Parallels or Fusion) is not generally done on this forum as they are not OS X related. To get help on those apps you usually will need to go to their forums.
Remember IOS will not run on either OS X or MS Windows, it only works on IOS devices.
Good luck with your installation.

MOVED: question regarding CPU temps and latest bios (1.8)

This topic has been moved to AMD64 nVidia Based board.
question regarding CPU temps and latest bios (1.8)

I'd believe the first bios's temps more than the second...
However what temps are given when using speed fan and/or everest? (in windows)

Questions regarding xft fonts, and awesome wm

Hi, I just tried ArchLinux yesterday and loving it!
I use JWM, but am very interested in dwm/awesome wm. I do have some questions:
1. On a thread in the forum, it is mentioned that dwm has no Xft support. How useful exactly is Xft? Would it impact on design work involving GIMP/Inkscape/Scribus?
2. Does awesome have Xft support?
3. I installed awesome, but I have no idea on what keys to use. The shortcuts are different from dwm. I tried to look for quick tutorial just to get the basics (dwm has one on their website), but seems like all documentation I found have none of that section and go straight to configuration.
Do I actually have to configure the wm before I can use it at a very basic level?
4. I would like to do some more comparison between wms, trying to find a good balance for me in regards of lightness and functions I need. However, I have no idea on what to use to keep track of cpu/memory usage for all the wms. What's a good way to do this?
Thank you in advance.

Welcome to Arch!
1. The lack of xft support in dwm mostly just means that you won't get anti-aliased fonts in the status bar. Individual applications will still have the same font support they had before you used dwm.
2. Awesome uses pango for font rendering, which is even better than xft.
3. Look at the man page for default key bindings. It's more or less usable out of the box, but you will definitely want to customize it somehow.
4. A good system monitor is htop. Install it from the repos and run it from a terminal.
Last edited by fflarex (2009-02-23 18:44:45)

Questions regarding *dump_dest parameters and fast_recovery_area

Hello,
I just installed a fresh new 11.2.0.2 Database on Solaris 10.
Everything straightforward on the parameter side!!! I tried custom install as well as general purpose template. When installing with DBCA, I set every parameters around DB Name in lowercase name.
With this, questions are popping in my mind regarding some parameters after installation.
First, %dump_dest parameters contains in path, two times the db name (ocpdb in my case):
background_dump_dest       /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
user_dump_dest                 /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
core_dump_dest                 /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdumpIs it normal to have ..../rdbms/dbname/dbname/..... as path, with dbname/dbname ??? Why?
Second, the question regarding the directory structure under fast_recovery_area (new term for flash_recovery_area). The directory structure:
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l
total 2
drwxr-x--- 2 oracle oinstall 512 2010-10-28 19:53 ocpdb
drwxr----- 5 oracle oinstall 512 2010-10-29 07:44 OCPDB
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l ocpdb
total 9528
-rw-r----- 1 oracle oinstall 9748480 2010-10-31 21:09 control02.ctl
oracle@enalab13:/u01/app/oracle/fast_recovery_area$ ls -l OCPDB/
total 3
drwxr----- 5 oracle oinstall 512 2010-10-31 03:48 archivelog
drwxr----- 3 oracle oinstall 512 2010-10-29 07:44 autobackup
drwxr----- 3 oracle oinstall 512 2010-10-29 07:43 backupsetWhy am I having a subdir with dbname in uppercase AND in lowercase? Should I specify dbname in uppercase at db creation to have all files under the same directory, or in lowercase? Or, is it normal?
I want to know how to do it well before reinstalling a fresh database.
Thanks
Bruno
Edited by: blavoie on Oct 31, 2010 6:18 PM
Edited by: blavoie on Oct 31, 2010 6:20 PM

Hi,
I just reinstalled all from scratch, everything in lowercase as well in environment variables and dbname in dbca:
oracle@enalab13:~$ echo $ORACLE_SID
ocpdbFast recovery area directories, dates prove that it's my fresh install:
oracle@enalab13:/u01/app/oracle$ ll fast_recovery_area/
total 2
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
oracle@enalab13:/u01/app/oracle$ ll -R fast_recovery_area/
fast_recovery_area/:
total 2
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 ocpdb
drwxr-x--- 4 oracle oinstall 512 2010-11-02 11:24 OCPDB
fast_recovery_area/ocpdb:
total 9528
-rw-r----- 1 oracle oinstall 9748480 2010-11-02 11:34 control02.ctl
fast_recovery_area/OCPDB:
total 2
drwxr-x--- 3 oracle oinstall 512 2010-11-02 11:24 archivelog
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:06 onlinelog
fast_recovery_area/OCPDB/archivelog:
total 1
drwxr-x--- 2 oracle oinstall 512 2010-11-02 11:24 2010_11_02
fast_recovery_area/OCPDB/archivelog/2010_11_02:
total 47032
-rw-r----- 1 oracle oinstall 48123392 2010-11-02 11:24 o1_mf_1_5_6f0c9pnh_.arc
fast_recovery_area/OCPDB/onlinelog:
total 0Some interresting output asked earlier in post:
SQL> archive log list
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence     4
Next log sequence to archive   6
Current log sequence           6
SQL> show parameter recovery
NAME                                 TYPE        VALUE
db_recovery_file_dest                string      /u01/app/oracle/fast_recovery_area
db_recovery_file_dest_size           big integer 4032M
recovery_parallelism                 integer     0
SQL> show parameter control_files
NAME                                 TYPE        VALUE
control_files                        string      /u01/app/oracle/oradata/ocpdb/control01.ctl,
                                                     /u01/app/oracle/fast_recovery_area/ocpdb/control02.ctl
SQL> show parameter instance_name
NAME                                 TYPE        VALUE
instance_name                        string      ocpdb
SQL> show parameter db_name
NAME                                 TYPE        VALUE
db_name                              string      ocpdb
SQL> show parameter log_archive_dest_1
NAME                                 TYPE        VALUE
log_archive_dest_1                   string
log_archive_dest_10                  string
log_archive_dest_11                  string
log_archive_dest_12                  string
log_archive_dest_13                  string
log_archive_dest_14                  string
log_archive_dest_15                  string
log_archive_dest_16                  string
log_archive_dest_17                  string
log_archive_dest_18                  string
log_archive_dest_19                  string
SQL> show parameter %dump_dest
NAME                                 TYPE        VALUE
background_dump_dest                 string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/trace
core_dump_dest                       string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/cdump
user_dump_dest                       string      /u01/app/oracle/diag/rdbms/ocpdb/ocpdb/traceI think, next time, I'll install everything regarding oracle SID in upper case...
Maybe it's details that I don't need to care about... I seems that something is happening bad with the management of fast_recovery_area...
Thanks
Bruno

Question regarding XI/PI and Idoc processing.

Hi,
I'm learning XI/PI and I have a question regarding Idoc processing in PI.
We need to configure communication between our BW system and our PI system using Idocs.
The Idocs are sent from BW to our PI systems and are then sent back to the BW system, there are no third system involved. The idocs are only between PI and BW.
Our BW system is already connected with many other R3 systems by using WE20 / WE21 and RFC's and everything works perfectly.
While I configure this communication between BW and PI it seems that PI is passing the Idoc to the Idoc adapter, converts it to xml and tries to find a receiver for the particular Idoc. I see the error "NO_RECEIVER_CASE_ASYNC" in SXMB_MONI.
Is this a normal behaviour in PI ? Why is PI thinking that the Idoc needs to be sent to another system when it is infact for itself ??
Thanks and regards
Remi

Hi
for error "NO_RECEIVER_CASE_ASYNC" in SXMB_MONI.
This problem may occur due to one of following reasons, so check
1 service is active in message? transaction SICF and activate service sap/xi/engine (right click, activate)
2 Is the port 8001 defined in the services on the smicm under services?
3 Check the roles assign PIDIRUSER
http://help.sap.com/saphelp_nw04/helpdata/en/56/361041ebf0f06fe10000000a1550b0/content.htm
role: SAP_XI_ID_SERV_USER attached to it
Also Check Whether PIDIRUSER has following role
SAP_SLD_CONFIGURATOR
SAP_XI_RWB_SERV_USER
SAP_XI_RWB_SERV_USER_MAIN
Regards
Abhishek

A few questions regarding SAP EWM and WM

Hello,
I have a few general questions regarding the differences between EWM and WM:
1) What are the benefits of EWM-MFS compared to WM + TRM (especially in terms of SPS)?
2) The Quality Inspection Engine (QIE) can also be used by SAP WM, right?
3) There is RFID-support in EWM, so EWM is able to communicate directly with SAP Auto-ID, right?
But I have heard that SAP PI is necessary in some cases, when and why?
4) Is there something new in EWM regarding goods receipt processing?
I have read that the splitting of inbound delivery items is possible in EWM in case of missing inbound delivery items. Is this really a new feature?
5) EWM can easily be connected to SAP BW for reporting purposes, what about WM?
6) What about scalability if the warehouse grows?
7) Is there any information about the costs of using EWM compared to WM and vice versa?
I appreciate any kind of help.
Thank you.
Dennis

Hi,
1. What does SAP offer as a product for dWM? Is it a u201Cspecialu201D installation of the SAP framework dedicated to WM or is it a standard ECC box where only the WM module is used?
There are two version of DWM. One is Decentralized WM as a part of ECC and another one is EWM as a part of SCM. Both are decentralized.
2. My understanding is that the interfaces between ERP and dWM can support some non-real time operations (like when the main ERP system is down, the dWM can still perform some operations). Considering that the transactional interfaces are based on BAPIs, how does SAP achieve this interfacing in non-real time environments? I am thinking you can complete the different processing unless both systems are up
When it comes to interfaces, DWM needs Deliveries from ERP. That's it, WM can function from there independent of ERP system. But, WM defenitely needs to communicate back PGI and PGR and other posting changes . So, in case ERP is down, even though PGI / PGR is done at WM end, they may not be communicated back to ERP. But WM generates PGI/PGR IDOCs which can always be reprocessed at WM end to resend them to ERP so that Inventory levels are accurate.
Hope that helps
Thanks
Vinod.

Question regarding iphoto and folders

I am a Mac newbie (9 months) and quite happy expect i freeze all the time after i installed lion, but that is for a different thread.;)
I had all of my pictures on an external hard drive. I had them organized in folders by year (also had a Year/edited for family photos we changed) and then by date/event...ie, 2011 04-05 Easter Dinner at Dad's.
When I got my macbook pro, I hooked up the hard drive and iphoto took care of importing all the pictures. (i have upgraded to iphoto 11). At first, I LOVED it. Putting face names in the pictures, etc, but after a while i got tired of having to reorganize them to find pictures the way i used to. I have over 15,000 pictures and renaming (even with the batch option) and moving them, and fixing dates, etc was becoming overwhelming. I found myself longing for my very simple folder organization. So i went to look for the folders, eventually found them and found out there were folders for originals, modified, thumbnails, etc. and when i went in my originals, they weren't in folders I had originally had on my external drive.
My wife, who is our picture editor, preffers photoshop and i have a windows laptop that i want to use for nothing other than pictures.
So......my question is:
How can i best take my photo's and put them back on a hard drive and then transfer them to the other laptop? Is there anyway to recover my old file system (deleted off the hard drive, except for an old backup but i have added thousands of pictures and have no way of telling which ones are in iphoto are old or new). I am fearful that if I just copy iphoto to the hard drive that the windows laptop will not read them, or that it will still show up with all of the different folders (original, modified, thumbs, etc)
And/or, is there a program to manage pictures for my macbook pro that will keep photos in folders more similarly to how i did before, so it will be easy to move pics from one laptop to the other.
Thanks!!!!

1. You know that iPhoto can do all this.
2. You can sort by Date -> View Menu -> Sort Photos.
3. You can search by date -> Click on the Search icon and select calendar. Then you can find all the pics from any day, month or year
4. You can search by date using Smart Albums too.
5. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
6. No there is no way to export back to your previous system. It's gone. You could have easily imported while mirroring that system, but it's too late for that now.
7. To get Photos out of iPhoto: File -> Export. Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
8. iPhoto can run a Referenced Library (where you have your own folder system) but I don't recommend it - especially for people unfamiliar with iPhoto and Macs. It also adds no extra functionality at all. It's just dumb storage.
Regards
TD

Question regarding stacks, searches and smart collections

Apologies if this is considered a 'basic' question - but I hope that someone can help me.
I'm currently in the process of upgrading/migrating a reasonably large Photoshop Elements 6 catalog where I've made extensive use of hierarchical folder structures, keywords and star ratings to quickly locate photos using a range a different techniques.I've successfully upgrade/migrated the Photoshope Elements catalog into Lightroom 3 and as part of the verification that everything has come across OK - I've done some comparisons of catalog searches in Elements and Lightroom and seem to be getting some strange results which I'm not sure if this is simply how things work or if I'm doing something wrong. I think part of the issue is caused by the fact that Elements always does destructive edits - so I never edited original photos in Elements so made extensive use of copied photos and stacks - but this didn't seem to cause any issues as Elements seem to keep things straight.
In Elements, the result of a query or Smart Collection might return 18 stacks of photos (with most of the stacks containing multiple photos) - but for most purposes Elements simply treated this as 18 seperate photos and simply ignored all of the photos under the top of the stacks.
Now in Lightroom I get different results depending on how the photos are identified. If I use either a keyword or rating search using the 'Right Hand' panel - I get a photo count returned which is always much higher than 18 but Lightroom seems to retain the stacks so only displays 18 different stacks, However, if I put the same search criteria into a Lightroom Smart Collection - it retrives and displays ALL of the photos in the 18 stacks (so it displays 2-3 times more photos) and I can't seem to find a way to get the Smart Collection to honour these stacks. I know that I could probably alter each of my photo stacks and change the rating or keyword of all of the photos under the top of the stack - but trust me this is a huge amount of work!!
Is this simply the way Lightroom works? I can partially understand and accept the way direct keyword or rating searches work using the 'Right Hand' panel - although the photo counts are different from what I've got used to in Elements the way the photos are actually displayed is not that different. However, what really confuses me is the completely different way Smart Collections work when compared to the 'equivalent' direct query. Have I missed something? Or is this some form of technical issue/bug/future enhancement request?
Also, on a slightly related issue - I've noticed that keywords with spaces (or other special characters) seem to cause issues for Lightroom - while Elements seems to cope with these OK. From the reading I've done it looks like one of the most common suggestions is to simply remove the spaces (..etc.) in the keywords - is that what most people would recommend??
Any help, advice or other suggestions would be appreciated.
Kind Regards .... Jerry

I'm currently in the process of upgrading/migrating a reasonably large Photoshop Elements 6 catalog where I've made extensive use of hierarchical folder structures, keywords and star ratings to quickly locate photos using a range a different techniques
Please tell us EXACTLY the steps you are using to move your PSE catalog to Lightroom.
However, if I put the same search criteria into a Lightroom Smart Collection - it retrives and displays ALL of the photos in the 18 stacks (so it displays 2-3 times more photos) and I can't seem to find a way to get the Smart Collection to honour these stacks. I know that I could probably alter each of my photo stacks and change the rating or keyword of all of the photos under the top of the stack - but trust me this is a huge amount of work!!
I believe this is how Lightroom was designed to work. Smart collections don't recognize that some photos are at the bottom of the stack.
Also, on a slightly related issue - I've noticed that keywords with spaces (or other special characters) seem to cause issues for Lightroom - while Elements seems to cope with these OK. From the reading I've done it looks like one of the most common suggestions is to simply remove the spaces (..etc.) in the keywords - is that what most people would recommend??
I have no trouble whatsoever using keywords that have spaces in them. I have keywords that are "New York", "New Jersey", "Union Pacific Railroad", etc. Special characters, such as a comma, will probably cause trouble. Exactly what are you doing where spaces in keywords are not working properly?

A few question regarding oracle Vm (and virtualizing Db 11g)

Hi,
I've just started evaluating Oracle vm for our next deployment.
One of the systems I'll need to virtualize is Oracle db 11g. As far as I understand the oracle DB template only comes with ASM? I would prefer to use LVM. What is the best way to install db into virtual machine without asm? Should I start with EL 5.2 and configure it, or could I somehow use the EL that comes with the template?
Regarding LVM: I'm planning to create different volume groups, each with just one logical volume. These volumes would be mounted to guest as /u01, /u02 ... and so on. All volumes will be created on mirrored disks/partitions. Later, I could just move, expand, strip volumes as db usage will require. Does that sound ok?
And another question regardin oracle vm: in the manual, chapter 4.6.2 says: "Install an operating system. This may be done a number of ways.
■ Install an Oracle VM Server-enabled operating system from CD-ROMs...."
Is there a list of server-enabled operating systems anywhere? And maybe more detailed explanation of this step?
Thanks
Jernej

Jernej Kase wrote:
One of the systems I'll need to virtualize is Oracle db 11g. As far as I understand the oracle DB template only comes with ASM? I would prefer to use LVM. What is the best way to install db into virtual machine without asm? Should I start with EL 5.2 and configure it, or could I somehow use the EL that comes with the template?I would probably start with the standard EL5 template instead. The Database template is designed to automatically configure and provision the database with ASM and would probably take longer to dismantle.
>
Regarding LVM: I'm planning to create different volume groups, each with just one logical volume. These volumes would be mounted to guest as /u01, /u02 ... and so on. All volumes will be created on mirrored disks/partitions. Later, I could just move, expand, strip volumes as db usage will require. Does that sound ok?It sounds OK, but ASM does all of that and more. It is also faster (particularly on Oracle VM, as it uses direct access to the disks). ASM also does automatic data levelling and striping. With 11g, I would strongly recommand ASM over LVM for your storage.
Is there a list of server-enabled operating systems anywhere? And maybe more detailed explanation of this step?There isn't a list -- that's possibly badly worded as well. If you don't want to use one of the paravirtualized Oracle Enterprise Linux templates available on eDelivery, you can use any operating system installation CD in ISO format. Note that installations from an ISO are done as fully virtualized guests (i.e. hardware virtualized) and require Intel VT-x or AMD-s extensions to be present and enabled. Hardware virtualized guests are also not as fast as paravirtualized Linux guests.
Oracle only certifies Database 11g running on Enterprise Linux in paravirtualized mode. The simplest way to deploy this is to use the provided templates.

A few questions regarding iPhoto conversion to light room

Some background. I use Yosemite, LR 5.7, and iPhoto '11. The iPhoto app has been used for organization only. All edits have been done in PS. No smart albums. The file system is simple using only albums, folders, and sub folders. The library contains JPEG, raw, tiff, and psd files. There are about 12k images. My questions:
1. Does it make any sense, or is it even possible, to migrate the library to LR one album at a time or is it still smarter to move it all at once?
2. Have the major issues with the importer now part of 5.7 been resolved since it was released last year as a stand-alone plug-in?
3. Is it now possible to move the psd and tiff files now? I read that originally they would not move. If not, is there a good work around such as moving them through bridge then through to LR?
4. I read somewhere that apple's upcoming photo app will make the import method to LR easier. Can this be true. I would guess it would be harder.
Thanks.. I appreciate all this community provides us.

Lightroom 6 is due very soon. It may be worth waiting to see if it includes an improved interface or plugin for iPhoto and Aperture.

Questions regarding iPhoto '08 and Elements 9

Similar Messages

Maybe you are looking for