Questions regarding SPNego with ADS
Hello Michael,
I don't really understand why you like to be able to login as UME Administrator. Why don't you provide the necessary permissions to the user you use for kerberos login?
Regarding point 2: yes, you are reauthenticated. Some similar issues have already been discussed a lot of times in the past in SDN forum. Please check via search if you can find a solution. By the way: there is a discussion of how to bypass spnego just some days ago: /thread/964827 [original link is broken]
Regards
Anja
Hello all
Sorry I asked stupid questions that are already answered somewhere within SDN.
I'd like to use SPNego- together with BasicPassword-Authentication because there will be e.g. external users with access to the Portal. Additionally, the Portal is also accessible from Intra- and Internet, so the users are able to access time & vacation management from their non-domain devices, e.g. home-PCs or mobiles. These devices are of course not in the Domain and it may be hard to emphasise the benefits of SPNego-Authentication within the company if the user has to enter his credentials twice if he logs in from another location.
The link mentioned by Anja refers to a solution that involves custom LoginModule coding to check whether a user is in the internal network. Unfortunately it seems this is the only solution at the moment.
BR
Michael
Similar Messages
-
Question Regarding Mesh with 3702 and non AC ap´s
Hello!
quick question regarding MESH deployments with 2 different sorts of AP´s: AC and non-AC modells: If my 3702i is my root AP´s, and 3602i my MAP - will AC still work in 80Mhz, or will I have to switch to 40mhz (and thus crippling (???) AC performance?)
Not 100% sure on this... I *think* it should still work for the normal 802.11n connection, but I´m not sure if the 80mhz channel width (needed??) for AC, will cause the non-ac 3602i to be stranded?
Thanks alot for your insight!Currently, my network DHCP server is a software based DHCP server. In reading over your post if I understood correctly it sounds like the managed switch would have its own hardware based DHCP server to assign IP addresses to those clients identified on the "external" VLAN. Did I understand that correctly or did misread something?
DHCP server will be software based, even though you defined it on your switch, it is DHCP service running on its OS.
I am configuring this setup for a small business application and will need to purchase a managed switch with 16 or 24 ports. Do you have any recommendations on a particular managed switch that will handle the VLAN configuration and include POE while keeping costs in mind.
In this forum, most of us discussed about Cisco enterprise grade wireless. Here is 2960X series switch detail, if you are interested
http://www.cisco.com/c/en/us/products/switches/catalyst-2960-x-series-switches/index.html
You may need to check the pricing with your Cisco account manager or from a Cisco partner.
HTH
Rasika
**** Pls rate all useful responses **** -
I have a Yokogowa WT130 power analyzer and I would like to use this to communicate to DASY Lab. The Yokogowa utilizes IEEE 488 communication and I was thinking of using the NI GPIB-USB-HS to connect the Yokogowa to the computer. I do know that DASY Lab is capable of utilizing IEEE 488 but I am confused on if I would neede a seperate driver for the Yokogowa or if the driver for the NI GPIB-USB-HS would allow communication. Any feedback would be greatly appreciated.
backhausr1,
I would recommend asking this in the DASYLab forum, which can be found here: http://forums.ni.com/t5/DASYLab/bd-p/50
You will likely get better and more prompt assistance.
Christopher S. | Applications Engineer
Certified LabVIEW Developer
"If in doubt... flat out." - Colin McRae -
Questions regarding chapter markers
I've got a few questions regarding working with chapter markers. First a little background info. I'm working in CS 5.5. I used Dynamic Link to send a Premiere sequence to Encore. In Premiere, I've got another sequence that is an exact duplicate of the original, with just a little text added.
I decided that I need to go back and add chapter markers, so I went through the initial Premiere sequence and added all the Encore Chapter Markers. I'd like all the chapter markers to be consistent in all three locations without having to re-do it manually each time.
Is there any way to bring those markers into Encore withour re-importing the sequence? I kind of figured that was the point of using Dynamic Link, but the markers aren't showing up in Encore.
And then, is there a way to copy those markers within Premiere from one sequence to the other?
Thanks in advance for any help.(Dear mods: a little overzealous with the thread moving. This had enough to do with Premiere Pro that it could have remained there... and saved me from retyping my reply.)
Is there any way to bring those markers into Encore withour re-importing the sequence?
This part is Encore. In the Encore Timeline containing the PPro sequence you're using with DL, select the sequence/asset, and go to Edit > Update Markers From Source. A warning dialog will pop up about replacing the markers; when you OK it, the markers positions and names will be updated.
And then, is there a way to copy those markers within Premiere from one sequence to the other?
It's not possible to copy and paste markers, but here's a workaround of sorts (assuming your sequences are the same duration and you want the markers at the same times):
Drag the sequence that contains the chapter markers into the sequence that doesn't; because the Encore chapter markers are sequence markers, they'll turn into clip markers when you nest the sequence. Select this nested sequence, and then use the Next (or Previous) Clip Marker (found under Marker > Go to Clip Marker, or with keyboard shortcuts) to jump to each clip marker. When you land on one, add a chapter marker to the sequence; if you don't already, set up a keyboard shortcut for this and it will make adding the markers a breeze. Now, you'll have to add names, if you want them, but at least this will make matching the time much easier. -
Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10. I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac
Model Name:
iMac
Model Identifier:
iMac7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
4 MB
Memory:
2 GB
Bus Speed:
800 MHzMost of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
Read the following for some recommended troubleshooting techniques from Apple:
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode? -
I have a question regarding emails being marked as unread when syncing with an exchange account.
I have a question regarding emails being marked as unread when syncing with an exchange account.
In the evening I can see I have 10 unread emails on my exchange account. I leave them unread. The following day, at work, I view and read all my mails from today and yesterday, so that I have NO unread messages. When I then sync my iphone it marks only the mails from today as read but, leaves all the mails from yesterday marked unread. Only solution so far is for me to go through the mails on my iphone one at a time for them to be marked as read.
My mail account is set to sync 1 month back.
I have had this problem on all the iphones I have had.
I currently have an iPhone 5 and my software is up to date.
What am I doing wrong?Hey kabsl,
Thanks for the post.
What type of email account is attached to your BlackBerry Z10? (POP3, IMAP, Exchange). Also have you tried removing and re-adding the email account to test?
Is this email account only setup on one computer or several computer?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
Thanks for your reply to my question regarding sound in iMovie. However I cannot follow the links you sent as they upload too slowly and therefore the instructional movie keeps stopping waiting for the content toload. Surely theremust be a solution for this??
Thanks in advance
lollyPlease continue posting in your original thread.
With the amount of traffic on these forums it is impossible to chase around finding this. -
Question regarding to changing the region of the app with remaining balance
Question regarding to changing the region of the app with remaining balance
Hello, I am attempting to change the location of my app store which has remaining balance of 0.01$. In order to change the location of the store, it requires spending all the remaining balance. As my balance is too low " 0.01$" to buy an app from the store, I am not able to change the region of my app store. Moreover, Since I am not a residence in USA, I am not able to use my credit card either.
I am wondering if it is possible to change the location of my app store with a remaining balance OR to delete my current balance.
Thanks
NejemClick here and request assistance.
(85511) -
I have just got my iPad2 and am very pleased with it. I have a question regarding the monthly (recommended) battery full charge. Should I let the battery completely die down to nothing at all before I plug in to recharge or would this complete drain be bad for my iPad?
It's not bad for it - on this page www.apple.com/batteries/ipad.html it says :
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down). -
I need help with a question regarding XML
I have an exam tomorrow, and I was checking exams from previous years. There is a multiple choice question regarding XML, and I don't know all the correct answers (some are pretty obvious).
It's plattform independent
It allows UML representation
It's a Text Only format
It's faster to process than native binary formats
It's a data exchange standard
It allows specification of the meaning of the data in the document
It comes from HTML
.NET and J2EE provide tools to handle itIn the beginning there was SGML... the newest HTML
standard is an XML defined language (although most
sites and pages are still not XML compliant). Soyou
can think of HTML as a subset of XML but XML isnot
by any means a subset of HTML.But wasn't XML's format based on the original HTML?
That is, XML is a generalization of the original
HTML. So, the "true"/"false" determination depends
on how you define "It comes from HTML" (I thought it
was derived from HTML, which would make the
statement "true" [IMHO], but I could be wrong).No XML is not derived from HTML. Markup languages existed well before HTML. HTML popularized them to a large extent but it was not the first by any means.
See http://en.wikipedia.org/wiki/Generalized_Markup_Language
Also Wiki states in it's XML article that XML is a subset of SGML (which through that article) is a descendent of GML
The language heirarchy from SGML is as follows
SGML ---- HTML (old spec and deprecated)
|
|
----- XML ----- XHTML (current XML spec)edit: the tree got screwed up. XML descends from SGML directly.
Message was edited by:
cotton.m -
Hi everyone,
I am having a problem with my Mac OS X 10.7.5 mac book air , there are constant pop pups and small windows with ads blinking constantly opening up on my safari in front of everything?? it is constantly interupting me and makes me mistakingly click on it then another new windows open behind the one im using..
I am not too sure if thats a virus or trojan.. I always thought that macs didn't get virus? this looks like one to me… any experts around? please help me fix it with your instructions? really don't know what to do... thanksThose are not viruses. You have probably installed some malware:
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware. -
Questions regarding Adobe Interactive Forms capabilities
Hi,
We have the following questions regarding Adobe Interactive Forms.
1. Not able to create a text field with dynamic size according to the data entered in the text field in a form with Static Content type forms. We use a scroll area, but cannot print content that is not visible in the scroll area.
We currently have Designer 7.0 and 2004 SP 16. I tried to set Form Properties -> PDF Render Format to be Acrobat 7.0 Compatible Dynamic PDF but the text field did not grow dynamically.
2. Another requirement is that once one form is accepted by the Customer, we need to generate a second, new form (with all user entered information from the first form) and the customer should be able to print the form.
To implement this, we need to have a form that can support dynamically growing text field in some areas, and specific positioning of form elements for other areas. Can we have a dynamic form which lets the fields grow dynamically according to the data entered in the field and with specific positioning of elements?
3. Sending emails from Offline forms Requirement is to send an email as soon as the form is accepted by our Customers. But the Customers can complete the form offline. Is it possible to automatically send an email in an offline forms without having the user push the send button from their email application? Can the Adobe Form do that part automatically?
Appreciate any help regarding above questions.
Thanks,
KalyanHI Francois,
Thank you very much for the very helpful information.
1. I am able to insert now the floating field inside a static text but the text does not grow dynamically even when I set the form type to be "Flowed Content". Is it something that required Adobe Designer 7.0 and also 2004s ADS?
2. I can still select only Flow or position content from the option but how can we use both in the same form? I am using Adobe Designer 7.0 and it allows to select only one. Is it again a problem in lower versions that I use?
3. This is an excellent idea and I strongly believe this is going to work (am trying to create POC for this solution). The form should be able to call the webservice as long as the user is connected to internet.
Can you provide your views on the first two points. I appreciate your help.
Thanks,
Kalyan -
Question Regarding MIDI and Sample Accuracy
Hi,
I have 2 questions regarding MIDI.
1. MIDI is moved by ticks. In the arrange window however, you can move a region by samples. When doing this, you can move within values of the ticks (which you can see on your position box that pops up) Now, will this MIDI note actually be played back at that specific sample point, or will it round the event to the closest tick? (example, if I have a MIDI note directly on 1.1.1.1, and I move the REGION in the arrange... will that MIDI note now fall on the sample that I have moved the region to, or will it be rounded to the closest tick?)
2. When making a midi template from an audio region, will the MIDI information land exactly on the sample of the transient, or will it be rounded to the closest tick?
I've looked through the manual, and couldn't find any specific answer to these questions.
Thanks!
Message was edited by: Matthew UsnickOk, I've done some experimenting, and here are my results.
I believe those numbers ARE samples. I came to this conclusion by counting (for some reason it starts on 11) and cutting a region to be 33 samples long (so, minus 11, is 22 actual samples). I then went to the Audio Bin window, and chose to view region length as samples. And there it said it: 22 samples. So, you can in fact move MIDI regions by samples!
Second, I wanted to see if the MIDI notes in the region itself would be quantized to the nearest tick. I cut a piece of audio, so it had a 1 sample attack (zoomed in asa far as I could in the sample editor, selected the smallest portion, and faded in, and made the start point, the region start position). I saved the region as a new audio file, and loaded it up in the exs sampler.
I then made a MIDI region, with and triggered the sample on beat 1 (quantized, on the money). I then went into the arrange window, made a fixed cycle length, and bounced the audio. I then moved the MIDI region by one sample to the right. I did this 22 times (which is the number of samples in a tick, at 120, apparently). After bouncing all of these (cycle position remained fixed, only the MIDI region was moving) I imported all the audio into the arrange on new tracks, and YES!!! The sample start was cascaded by a sample each time!
SO.
Not only can you move MIDI regions by sample, but the positions are NOT quantized to Logics ticks!
This is very good news, and glad I worked this out!
(if anyone thinks this sounds wrong, please correct me, but I'm pretty sure I proved it, in my test)
Message was edited by: Matthew Usnick -
Question regarding homehub and Open reach router -...
Hi all,
I had infinity installed earlier this month and am happy with it so far. I do have a few questions regarding the service and hardware though.
I run both my BT openreach router and BT Home hub from the same power socket. The problem is, if I turn the plug on so both the Homehub and Openreach Router start up at the same time, the home hub will never get an Internet connection from the router. To solve this I have to turn the BT home hub on first and leave it for a minute, then start the router up and it all works fine. I'm just curious if this is the norm or do I have some faulty hardware?
Secondly, I appreciate the estimated speed BT quote isn't always accurate, I was quoted 49mbits down but received 38mbits down - Which I was happy with. Recently though it has dropped to 30. I am worried this might continue to drop over time. and as of present I am 20mbits down on the estimate . For the record 30mbits is actually fine and probably more than I would ever need. If I could boost it some how though I would be interested to hear from you.
Thanks, .Just a clarification: the two boxes are the HomeHub (router, black) and the modem (white). The HomeHub has its own power switch, the modem doesn't.
There is something wrong if the HomeHub needs to be turned on before the modem. As others have said, in general best to leave the modem on all the time. You should be able to connect them up in any order, or together. (For example, I recently tripped the mains cutout, and when I restored power the modem and HomeHub went on together and everything was ok).
Check if the router can connect/disconnect from the broadband using the web interface. Leaving the modem and HomeHub on all the time, go to http://192.168.1.254/ on a browser on a connected computer, and see whether the Connect/Disconnect button works. -
Question regarding IWDTree and context Value Node naming
Hi,
I have a question regarding the IWDTree / IWDTreeNodeType components.
I have a context looking like this:
Context
+ ResponseNode
+ PersonNode (1..1)
+ PersonAddressNode (empty node, placeholder)
| + AdresNode (0..n)
+ PersonChildNode (empty node, placeholder)
| + PersonNode (0..n)
| + PersonAddressNode (empty node, placeholder)
| + AddressNode (0..n)
+ PersonParentsNode (empty node, placeholder)
+ PersonNode (0..n)
+ PersonAddressNode (empty node, placeholder)
+ AddressNode (0..n)
The context represents a person, a person's address, and a person's children and parents with their respective addresses.
As a result, on different branches, a PersonNode and AddressNode can appear.
And for some strange reason, all PersonNodes and AddressNodes link to the same ResponseNode.PersonNode.PersonParentsNode.PersonNode and ResponseNode.PersonNode.PersonParentsNode.PersonNode.PersonAddressNode.AddressNode respectively, irregardless of their branch...
Is it illegal to have multiple PersonNode and AddressNode node names, and should they be named uniquely?Generally, node names need to be unique inside the context, attributes in different nodes can have same names. I wonder if the context structure you described will result in code without compile errors.
The WD Tree can only be used with recursive context nodes or with a hierarchy of non-singleton child nodes.
Can you give an example how your tree should look like at runtime?
Maybe you are looking for
-
Facing problem with 3.5 framework
Do me a favour asap.. I am having problem in installation of sql server 2012. which is because of framework 3.5 It is not installed on my system..and i have tried several times to enable this feature.. but i failed. so please get back to me with solu
-
IPad/iPhone Backup/Management App for PC?
I'm fed up with the massive headache that's called iTunes. I don't want a Backup/Management App for my iPad and iPhone that is music centric. I have a lot of valuable information, applications, photos, videos, and documents on my iPad and iPhone t
-
HI All, We have a scenario in which data comes from a legacy system to xi ,we use soap adapter there,and data goes from xi-crm through idoc adapter. Is there any tool that can be used to test the xml coming from legacy system and going to idoc. Thank
-
(SOLVED) virtual box installation
Hi. I just installed new archlinux in virutalbox to check new installtion procedure... I have installed everything, installed: xorg-server xorg-xinit xorg-server-utils, dbus, gnome, gdm, virutalbox-guest-additions load modules for vbox and when tryin
-
I can' t delete my account info under there credit card I put a gift card and it wouldn't take so but now it stuck and it saying problems with credit card info