Queue Assignment property in BPM

Hello all,
I have two XI systems with the same SP level (PI 7, SP 11), and in one
system I can see the "Queue Assignment" property in the "Edit
Integration Process" screen in the repository, but in the other system,
the property is not there.
I compared the configuration of both systems, and didn't see any
difference.
How can I activate this property on the second system?
Thanks in advance,
Gregory Paris

check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c00d9465-ea97-2910-deac-f8aa681eef35
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm

Similar Messages

Don't have "Queue Assignment" property in BPM

Hello all,
I have two XI systems with the same SP level (PI 7, SP 11), and in one
system I can see the "Queue Assignment" property in the "Edit
Integration Process" screen in the repository, but in the other system,
the property is not there.
I compared the configuration of both systems, and didn't see any
difference.
How can I activate this property on the second system?
Thanks in advance,
Gregory Paris

check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c00d9465-ea97-2910-deac-f8aa681eef35
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm

Multiple Queue Assignment for Integration Process - PI 7.11

Hi,
I am trying to configure multiple Queues for an Integration Process.
The Integration Process is straight forward, except for a Asynchronous Request Response pattern with correlation. (A asynch send step - immediately followed by a asynchronous receive step with Correlation)
I have done the following
1) In IR set the Queue as Multiple - Content Specific
2) In SWF_INB_CONF transaction reconfigured Multiple Queues - Content Specific without buffering
But when I trigger the message, the message is not at all triggering/entering the Integration Process. The error message is BPE Internal Failure.
But if I reconfigure the IP as One Configurable Queue & "Without Buffering", it is working. But we want multiple queues assigned to this Process.
Thanks in advance.
Regards,
Sudharshan N A

Bjoern, there are blogs/wikis available which should be searched before a question is asked on forum. The information you need is quite basic one and I will therefore lock this thread.
Regards,
Prateek

Assign programmatically a BPM role to a user

Hello everybody,
I want extend the security administration of the workspace.
I have investigated tha you can manage the users programatically, with a jmx connection.
But i don't kow how assign progrmatically a BPM role to a user.
Thanks,
Regards!

hi,
try this one.
assign this role to the user.(this user will not be abe to access that transaction).
in s_tcode, we have to define the "from and to" excluding vao1!.
hope this might help you.

RF menu Queue assignment

Hi,
we are using 2 server ,server-1 and 2, while creating delivery in server-1, and also TO,the TO has been assigned to the queue,
if we are created delivery in server-1 and itis getting distributed to server-2 and creating TO in server-2 then the Queue is not assigned to it.and also the picking area is not assigned.
if we are going to assign the picking area ,then the queue is automatically assigned to the queue,all spro settings are seems to be ok.
any pointers

Picking area are assigned to set of Bins from which picking will be performed.
Bins are not transportable it has to be created manually in the server 2.
Go to LS11 and select the bins to which the picking area has to be assigned and click on storage bins change icon and give the picking area and save it.
In SPRO >> RF queue management >> Assign Areas and activities to queues check the picking areas are assigned to the src bin and the respective queue.
Then create the TO for the delivery and check the TO header to find the queue assigned.

Queue assignment to WO with multiple WT's

Hello,
I'm trying to figure out the queue assignment for a warehouse order with multiple warehouse tasks.
My scenario:
I have a returns delivery for 1 PC of product X. After unloading, this product is transfered to the Quality Inspection area. Based on the inspection result, the product is transfered to scrap or putaway location. I have designed this process using POSC.
Now, I'd like to use RF scanning for both moves; from GR-AREA to QIS-area, and from QIS-area to Putaway-area. In order to do this, the correct queue needs to be assigned to the warehouse order.
I've made the necessary queue settings, nut the queue is not automatically assigned to my WO. I think there's something wrong in the WOCR, because the WO Activity area is not automatically assigned to the WO.
Any suggestions?
Thanks & regards,
Oliver

The issue is solved, I had to make an additional setting in the Queue Determination Criteria.
It's a bit strange; I already had entered the criterion that all goods from Activity Area 9011 (my GR-area) would be assigned to the INBOUND-queue, though this didn't work for my returns process.
Now, I've made an additional setting where I;ve assigned the INBOUND-queue to the warehouse process type. Now, the queue gets assigned automatically.
Regards,
Oliver

I have assigned standard task as General Task in agent assignment but why there is a red flag beside the agent assignment property in task property like the image below?

I have assigned standard task as General Task in agent assignment but why there is a red flag beside the agent assignment property in task property like the image below?

Hi Atiq
Now that's concerning.....!!!
This error usually shows up when the workflow is not able to resolve the outcome of the decision....no branch is there for the selected decision.
Since, the standard workflow is also going in an error....this is something wrong...
Did anyone play around with the standard decision task?
I am not sure if this will help, try generating the task and standard workflow by executing the FM SWD_WFD_REPLICATE_FROM_9999 from SE37 directly. First, generate the task (give full task ID TS00008267 as the input and execute; and then the standard verification workflow in the next exec).
Try and test again...if this works, generate your custom workflow again like this.
The above is a pure guess and I am not sure if this will work.
Regards,
Modak

Assigning property (* or / or ? or +) while loading data/building dimensions

Hican anyone tell me how to assign property (* or / or – or+) while loading data/building dimensions thanks and regards,Balu

The section in the DBAG about loading properties is really quite good. Basically these have to be in your load file in order to load.

Assigning Exceptions in BPM Integration Process

hello,
Does any body have an idea regarding how to assign an exception in the control step.
I want to raise an exception in the BPM
Thanks in advance

Hi
If You still have the question unanswered then:
1) In a surrounding block you must define names for exceptions.
2) In the control step you can then pick one of defined exceptions...
3) For the surrounding block you must add "Exception Branch" from block context menu and assign it to the same exception.
Then You can handle the exception there.
Best,

Create SiteCollection and assign Property to be used in onet.xml

Hi,
I need to create a SiteCollection and I want o assign during a creation a propertybag value or something similar that can be used from SiteFeatures that fire during processing of the onet.XML.
any idea?
Sven

Hi,
You can achieve this using SharePoint Feature Stapling feature. You can create your custom property using Feature stapling feature and attached the feature to the site template.
Whenever you create a site collection, there will be custom property will be available. You can set this property value using any one of the following options.
PowerShell
CSOM
JavaScript
Server-side code.
Or use the CodePlex solution to set the property bag value. The following is the link for codeplex solution
SharePoint Property Bag Settings 2013
The following two links will be helpful for your similar solution
SharePoint Feature Stapling: Create the Feature
SharePoint Feature Stapling: Staple the Feature
Please mark it answered, if your problem resolved or helpful.

RF Queue Assignment BADI

Hi,
I know there is a BADI that can be used to come up with our own TO assignment procedures to RF Queues. We have a strange requirement from the business but still we are investigating the possibilities of doing it.
Business would like to see one Queue with the name of ship to party for the Queue name. If a delivery has a ship to with City A then the TOs that gets created against the delivery should be assigned to a separate queue. Can this thing be done using the RF Queue BADI?

Since you have the entry with wild card "***' first, that's why everything is going to first queue. Instead of wild card, put in all the storage types..........or try to set it up as second condition in the table.
Hope that helps
Thanks
Vinod.

Queue assignment based on Input

Hi All,
Is it possible to assign a particular queue based on the Input payload?
Regards,
Naresh

Hi,
Check these
/people/sap.user72/blog/2005/12/12/how-to-prioritize-messages-in-xi
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
Regards

Assigning property through rule files

Hi All,
a) Could anyone please explain me how can we assign properties of members through rule files while building the dimension. Suppose we want to assign the property store data or dynamic calc to any member then how we will do it through rule files.
b) What is the maxl command to refresh the database?
Thanks

John,
Thanx ur blog was very helpful. I am facing a problem while loading a dimension which has attributes e.g. Product is my dimension which has attributes like Caffeinated- boolean, ounces- numeric, pkg type- text and Intro date- date.
I get errors like-
1)Intro Date_04-01-1996: The attribute member name does not match the setting for the type of attribute. Date attribute members should be specified in xx-xx-yyyy format................... and.............
2) Ounces_12: The attribute member name does not match the setting for the type of attribute. Date attribute members should be specified in xx-xx-yyyy format.
Im new to Hyperion Essbase...any help wld be highly appreciated.

Assignment Problem in BPM

Hi All,
I hav a scenario where i receive an IDoc from R/3 and will check for a field in one particular segment. I used a container operation to acheive this. when i activated the process in sxi_cache transaction, it is displaying the error
"The Value of Expression '&MATMASIDOC.PAYLOAD.BWKEY&' Cannot Serve As the Source of an Assignment". Then i implemented the SAP Note '890760'. I'm unable to activate the changes of the SAP Note implementation due to some access related issues. but, i just wanna check whether this is the right way to overcome the error? Any help wud b appreciated.
Thnx in Advance.
Anil

Did you implement the following as in the note :
>> Solution
Implement the attached correction instructions.
ShabZ

JMS queue assignment with WLST offline WLS 8.1

Hi
I would like to know how to assign a JMSQueue to JMSserver under WLST offline and WLS 8.1
I've tried with assign(...) function or the setParent without success.
As far as I understand, the JMSQueue is always created under a JMS server, once created there how can I assign it to another server??
10x

Hi
I would like to know how to assign a JMSQueue to JMSserver under WLST offline and WLS 8.1
I've tried with assign(...) function or the setParent without success.
As far as I understand, the JMSQueue is always created under a JMS server, once created there how can I assign it to another server??
10x

Queue Assignment property in BPM

Similar Messages

Maybe you are looking for