Queue monitoring in Solman through CCMS

Hi All,
Can some one please help me to know how Queue monitoring(SMQ1 and SMQ2 in ECC system) is possible through CCMs.
Would be thank ful if somebody can provides me steps as to how we can configure queue monitoring.
Thanks You all in advance.
Regards,
Prerna

Hi Prerna,
Please go through the below SAP Note and a link which will help you to configure Queue Monitoring in CCMS.
441269 - Setting up tRFC/qRFC monitoring in the alert monitor
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting
Let me know if You face any more Issues for the same.
Thanks
Ajitabh

Similar Messages

API s for monitoring XI Components through CCMS in XI

Hi
Does anybody has an idea/experience about if there are some Api's for monitoring the XI components through CCMS(or any other way) programatically?
Regards,
Sudip.
Message was edited by:
Sudip Kumar Paul

Hi Sudip,
Please look at the below link
http://help.sap.com/saphelp_nw04/helpdata/en/cd/4f1a403233dd5fe10000000a155106/frameset.htm
Thanks and Regards,
Chandu.

Monitoring lock timing through CCMS

I want to setup a ccms monitor that has to notify when locks under SM12 are older than 24 hours. Can anybody have the information through which monitoring method I can configure this (solution manager 4.0 or WAS6.40)?
Thanks
Sateesh

Hallo Sateesh,
such a monitor does not exist within the SAP delivered monitor templates. You would need to create (which means you have to write a function module or report) your own data collector to get this data. The document <a href="http://service.sap.com/~sapidb/011000358700001752571999E/SUPPLIER_46A_EN_Neu.pdf">How to Write a Data Supplier for the Alert Monitor</a> describes how to do this.
Regards, Michael

Job Monitoring with SolMan or CCMS

Hi,
does anyone know, how to monitor jobs and zjobs within the SolMan? Or using CCMS?
Thank you

Hi Timm,
you should evaluate Business Process Monitoring capabilities within SAP Solution Manager. It offers functionality for a technical job monitoring.
You will find further information (for example detailed setup guides) in Service Marketplace: http://www.service.sap.com/bpm -> Media Library
Check the information on configuration in the Solution Manager IMG (transaction SPRO -> SAP Reference IMG -> SAP Solution Manager Implementation Guide ->SAP Solution Manager -> Scenario-Specific Settings -> Operations -> Business Process Monitoring.
Best regards
Ruediger Stoecker

Spool Error Monitoring through CCMS not available in Standard Delivered MTE

Hi Everyone,
My Client requirement is to monitor SPOOL Errors through CCMS. But Standard Monitoring Tree Elements (MTEs) does not capture the Spool Errors .
Can anybody Please let me know , How Can I setup Spool Error Monitoring through CCMS.
Thanks & Regards
Deepak Gosain

Deepak,
Check this One...
//help.sap.com/saphelp_nw70/helpdata/en/34/658a3b15566262e10000000a11402f/content.htm]
Hope this Helps....
Happy Learning
Chander N Purna

Queues monitoring

Hi Experts,
Please explain ARFCRSTATE table like --
What are the contents that it carry?
What runtime information we can get from this table?
We are in the process of optimising our monitoring activities and one of the major part is queues monitoring. We are now refreshing each and every time the inbound queues to check whether there are any messages stuck in them. We are now trying to develop a program so that if the messages are stuck in queues we will be informed like an Alert through mails or something else. After searching a lot in the forums i came to know that the above table carrys the run time information about queues. but when checked i didn't find any useful information.
Are there any pre configured programs or tables or anything in sap for this queue monitoring stuff?
If so please give the details.
Thanks in advance.

You can also configure CCMS alerts to monitor inbound/ outbound queues.
Check the below blog and find more, can help you on queue monitoring:
http://www.sdn.sap.com/irj/scn/weblogs?blog=/cs/user/create/cs_msg%3fx-lr=cs_disc%2f2131%26x-lr2=wlg%2f2777%26page=
--Div

Configure System monitoring in SOLMAN

Hi
I need some help on this. For now I have installed solman / windows 2008 / oracle 10g on VM. A test system has been added as a satellite system in solman. CCMS Agent and CCMS PING has been installed in the satellite system. I am able to use my Alert monitor in solman to check out alerts from the satellite system. what do I need to do next to integrate this with solution manager?
I have reads the document http://help.sap.com/saphelp_sm40/helpdata/EN/0b/160419162a476380b5608e7f27a742/content.htm
This talks about "Setup system monitoring" and going into change mode. I dont see the change mode or the option to setup system monitoring.
PS: SMSY is setup correctly, I can see my satellite system from there.
any ideas on how to proceed will be appreciated.
thanks
ravi

The "Setup system monitoring" option showed up after in went into solutions overview in solution_manager Tcode and clicked on a number (hyperlink) under System monitoring for SAP Solution Manager Reference

SALRT_CREATE_API with CBMA and/or Central Monitoring using Solman

Hi,
Does anyone know if function SALRT_CREATE_API can be used to raise alerts in Component Based Message Alerting (CBMA) and/or Centralised Monitoring in Solman? I understand SALRT_CREATE_API worked with the classic Alert Framework.
Che

Hi Michal,
Thank you for jumping in on this thread. Great timing with your blog
However the following thread suggests we can still use SALRT_CREATE_API:
XI Alerting and Central Monitoring : some alerts remain on PI
"Try removing the "CentralMonitoringServer-XIAlerts" RFC connection from both systems (proxy and PI). Then, ensure all com.sap.aii.rwb.server.centralmonitoring.* parameters are configured correctly on PI (restart system to apply changes on exchange profile) and try executing the scenarios again.
Check the target CCMS system the RSALERTDISP report and see if the alerts are being received there."
Perhaps the above only applies in the case of a dual stack? I am not quite ready to try some examples but when I do then perhaps options will become clearer to me. I will try to remember to update this thread with what I find.
Thanks
Che

Queue Monitor and Inbound Adapter Tabs in RWB are empty

Hi,
When we process messages in PI and want to see some monitoring data in the RWB we found that some screens do not show data. (PI 7.10)
RWB --> Message Monitoring --> Integration Engineselect a message --> Details
Then we get a new popup with 5 tabs:
1. Mesage Data: OK
2 Message Content: OK
3. Inbound Adapter: when I log in an empty screen is shown
4. Queue Monitor: when I log in an empty screen is shown
5. end-to-end Monitoring : ends in Java dump
I've looked into sap help and OSS, but I can't find any hints.
Somebody any suggestions
Thanks in advance
Ron

Hi Gokhan,
Our technical consultants are having a look into the sap note.
We have activated end-to-end montioring and now you'll see in the message monitor of the RWB that end-to-end monitoring is available.
You activate it with RWB --> configuration
Hope this clarifies it.
Best regards
Ron

Queue Monitor Wait

Database: 10.1.0.2
The event of "Queue Monitor Wait" in STATS$SYSTEM_EVENT
is tens of times of others' event.
aq_tm_processes is already set to 1 in init.ora
How to improve it?
Thanks

v$system_event shows cumulative values since the last instance startup. You need to install statspack and get delta values to find out which events are causing problems.

JMS Queue monitoring

Hi everyone,
is there any way to monitor a jms queue with its contained messages ? i'm talking about a tool like the jmx console in jboss - the JMS Adapter and JMS Notification in the Visual Admin only provide some properties.
Any suggestions ?

Hi,
In short what you want (sending email in case message has stayed too long time in the queue), is NOT possible directly. That's not a standard feature by the JMS spec.
What is possible is the is so-called dead messages, once the acknowledgment fails the predefined number of times then the messages will be redirected to a special queue. From there the messages can be exported by telnet.
Check SAP note 777930 for more info. Btw, it might be a good idea to get familiar with that note, otherwise if the external server let's say always throws an exception while processing the message, it will be moved to this special queue and unless someone issues the appropriate telnet commands, nobody will understand about this.
However if you disable this feature, that will mean that the message will be delivered endlessly, causing CPU load. Not nice if you have doubts in your external listeners.
Now about the queue monitoring :
You could create manually a periodic task (EJB timers in J2EE 1.4 which is covered in the prerelease of the next server version, or if you are using Netweaver 04s or 04s than perhaps java.util.Timer) that will periodically open a JMS browser, check the messages in the queue, if they have stayed too long time (>100 seconds for example ?) or if the queue is too big (>100 messages) you can send manually the email alert that something has went wrong. By usage of the JAVA API that should be simple
Another thing you can do is that inside your external listeners and the onMessage method, you could check manually the number of times the message is redelivered, if it is above some threshold (i.e . if it is 3, that means the SAP server has delivered the message 3 times , since the listener have rejected it 2 times already),then you can send the email via the standard java API. The delivery count can be retrieved by using the standard optional property JMSXDeliveryCount from the message.
HTH
Peter

Queue Monitoring

Hi Experts,
I got this error in SAP Queue Monitoring anyone explain me
Error:The assert condition was violated
Also give me some link to understand the Queue monitoring in SAP.
Regards,
Manigandan

Hi Manigandan,
I got this error in SAP Queue Monitoring anyone explain me
Error:The assert condition was violated
Check this thread: http://scn.sap.com/thread/1240651
Also give me some link to understand the Queue monitoring in SAP.
If you use SCN search you can find links like these:
http://scn.sap.com/docs/DOC-16526
Outside of this comminuty: http://www.****************/Tutorials/XI/XMLMessageQueues/Monitor.htm
Regards.

Queues stuck in DB-Queue Monitor .

Hi,
I have B1if with some scenarios in my system, but i have a problem with Queue stuck.
Under DB-Queue Monitor, i have the stuck queues, Q.INB_IQ_INTQ_ASYN_QS.0010000000 > sap.B1SysSLDSync > message(<SLDModify sysid="0010000112" company="SBO_DEPOSITO_NILDO" task="delete" /> ).
I have checked and all IPO-Steps are active.
Any solution????
[]'s

Hi Priyanka,
To clear the no send status entry, go to R3AS, select the object say for BP (Bupa_main) press enter and then execute, then open R3AM1 enter object name as Bupa_main and select Running and done and execute.
Now you can open SMQ2 and click on each entry with nosend status and then click on activate queue in the top toolbar, this shld change the status to running and then click on refresh.
The following is the list of Queue extensions that are used in CRM, all the queues start with these extensions:
<b>Outbound queues</b>
CDB*     Start queues for loads CRM -> CDB
CRM_SITE*     Load queues for Mobile Clients
CSA*     Send queues of CRM Server Applications
EXT*     Start queues for loads CRM -> Ext.
R3AI/R*     Start queues for loads from ERP Backend system
R3AU*     Load queues CRM -> ERP Backend system
<b>Inbound queues</b>
CRI*     Initial load queues CRM -> CDB
CRM_SITE*      Load queues from Mobile Clients
R3A*     Load queues ERP Backend -> CRM
CSA*     Send inbound queues of CRM Server Applications
Hope this answers ur query.
Regards,
Amit
Message was edited by:
        Amit Singh

User Administration through CCMS

Hello Gurus,
We need alerts or report for Users in ERP systems through CCMS.
e.g.
We need transactions per user history of ERP server.
So my question is that is it possible to get user's transaction history through CCMS? (I know other ways to get user history, I just wanted to know that is it possible through CCMS?).
If it is possible, then please let me know how it works? any document?
Thanks in advance
Nilesh

Hi
Hope below doc will help you
https://websmp109.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000408612011E
https://websmp109.sap-ag.de/~sapdownload/011000358700000509162011E/EEM_Script_Editor_EN_final.pdf
Regards
Prakhar

Why XBTO* is visible in inbound queues monitor if it is an outbound queue

Hi all,
why XBTO* is visible in inbound queues monitor if it is an outbound queue?
Any help will be really appreciated.
Regards,
Ivá

Similar question...
XBTO and XBTS Queues

Queue monitoring in Solman through CCMS

Similar Messages

Maybe you are looking for