Queue Name Configuration

Hi Team,
Scenario: A custom Bdoc is created for replication of Business transaction from CRM to R3 (only 1 way). This is working fine.
But when we check transaction SMW01 ( or Bdoc header tables), there is no queue name created.
If we take a similar scenario of a Sales Order replication to R3 ( Bdoc Type: BUS_TRANS_MSG), we can see the queue name as CSA_ORDER_0100090001, CSA_ORDER_0100090002 etc ( the last part being the Order number).
We made entry in table SMOFQFIND, but it did not give any result. Any idea how to get the queue name for the Custom Bodcs?
Any help will be appreciated.
Many Thanks,
AMit

Hi Amit,
Reffer to my reply in your post qRFC Queue Name Configuration
Best regards,
Vikash.

Similar Messages

QRFC Queue Name Configuration

Hello Everyone,
Does anyone know how we can configure Queue name is CRM?
Many Thanks in advance.
Cheers,
Amit

Hi Amit,
You can maintain the table SMOFPARSFA in the CRM server where as in R/3 you CRMRFCPAR, CRMPAROLTP. Reffer to the note 623195 for the CRM and 510192 for R/3 settings.
Allot points if my post helps!!
Best regards,
Vikash.

Help on Dynamic queue name in JMS Adapter

Hi Experts,
Could you please explain how to configure dynamic queue name in JMS Adapter.
My requirement is i would have to add the date and time to JMS Queue Name in receiver JMS Adapter.
Thanks in Advance
Chilla

hi,
as it's not in Adapter-Specific Message Properties
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
looks like you cannot do it with jms adapter in standard
use proxy or your own adapter instead
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Queue name in QOS EOIO -Sender SOAP Adapter

hi,
While configuring sender soap adapter , if we specify EOIO as QOS , then there is a mandatory parameter Queue name to be specified.
What is this Queue name ?
and where is it created
kindly reply
Regards,
loveena

Hi D' souza
Goto tcode -> SXMB_ADM -> register queues
for specifying QOS EOIO you need to assign a queue
from there you can specify the queue for Outbound side EOIO queue
Various queue name and there meaning is as follows
XBT*-Queues for Exactly Once.and time dependent
XBQ*-Queues Exactly Once In Order.
XBTI* are inbound queues for EO with time constarint
XBTO* are outbound queues for EO with time constarint
XBQI* are inbound queues for EOIO
XBQO* are outbound queues for EOIO
for beter understanding of how to configure sender soap channel you may folow this link
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
thanks
sandeep
if helpful reward points
Thanks
sandeep
if helpful rewrad points

Queue Name

Hi
XI gives random queue names, for EO and EOIO queues. When is the queue name generated ? Is it when the message enters the SMQ2 of the XI ? Logically it should get a name there. Would it change when it reaches the SMQ1 ? The outbound queue to the receiver adapter ? So if there can be two queue names then how would we identify the message in MONI and Adapter Engine ? I guess the queue name should be same in both MONI and Adapter Engine monitoring. Can someone help me with this
Thanks in advance
Radhika

Hi Radhika,
1. When is the queue name generated ?
The queue name is generated in 2 occasions..
a.When the message is going from Adapter Engine to Integration Server... The message is stored first in Messaging service after adapter engine and sent via queue to Integration server. That is outbound queue.SMQ1.
b. Similarly after processing.. Receiver determination,Interface determination.... The message has to be sent to the target. i.e. again a adapter engine.... the messages are stored first in inbound queue called SMQ2.
2. Do we have to configure something so that the queue name will not change and both SMQ1 AND SMQ2 will have the same queue name ?
Usually the admin will do this job. The queues are automatically assighned.
Based on some algorithms the queue is decided.
But.. u can configure the queues such a way that always the message of paticular interface should go to the same queue..
i.e is nthng but called as Queue prioratization..
I hope this will solve all ur doubts.
If not pl do post
Babu

Poll Interval, Msecs To wait before modification checks & Queue Name in CC

Hi All,
I have 3 inter-related interfaces which is having 3 File Sender Communication channels as below charasteristics;
All 3 ccs are running on a common Queue Name inorder to cater the business scenario;
so PI should consume the files in the same sequance of files are copping into the locations;
(time gap between incoming files is around 1-3 secs)
Existing Values in Production system
IF086
Poll Interval                                                                        1 secs
Msecs To wait before modification checks                      10000
Queue Name                                                                     XI_QUE1
run sequance must be 1
IF913
Poll Interval                                                                        1 secs
Msecs To wait before modification checks                      10000
Queue Name                                                                     XI_QUE1
run sequance must be 2
IF084
Poll Interval                                                                        1 secs
Msecs To wait before modification checks                      10000
Queue Name                                                                     XI_QUE1
run sequance must be 3
we are having PI Alert email configured in the system;
when we get a big files into the locations, we get an unwanted Alert emails saying Error;
when I check PI, Overall file transfer is successful,
but we have the below error in the Message Display Audit log as
"Channel CC_Cxxx: Attempt to send file 'T201_200909141702' failed because file was modified during processing. 0 bytes expected, 1202248 bytes found. Trying to resend file"
but Overall file transfer is successful;
Does anyone can explain the reason for this error; ?
Also to remove this error & unwanted Alert email (since final status is successfull), I changed the Poll Interval to 3 for all 3 above CCs; Now I dont get the above error;
Do you think there might be a sequance issue due to this change;?
(time gap between incoming files is around 1-3 secs)
quite lengthy to explain sorry;
Appreciate your help please
thanks
Iver

Hello Iver
Question 3 in the note #821267 FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter, explains what is happening here. This answers your first question.
The file in question was being written to by another process when the file adapter attempted to send it. Depending on the length of time/amount of data that is being written to these files, increasing the polling interval to 3 seconds will help.
Regards
Mark

MessageQ: dynamic queue names

In our application we would like to do the following:
at runtime, attach to a temporary, secondary queue.
bind some arbitrary name to this queue. exec a new process with the new queue
name given to it as parameter.
The 'child' process should be able to read messages put on the queue by the 'father'.
I haven't been able to get this to work. After creating
a temporary, secondary queue, my bind_q call fails with a PAMS__NOOBJECT error.
Are there any configuration items that are needed before this
can work?
Thanks, Guy
If theres a more appropriate forum for MessageQ questions, could you please point
me to it? Thanks, Guy

> please refer the link what you provided in section 2.8 mentioned JMS Receiver communication channel will give response back,but i never tried.
Yest because this document is applicabe for a scenario where request msg will come form sender JMS to XI and then Response will be sent back again to JMS by using receiver JMS adapter. So senario is JMS request --- R3 (via XI) --- R3 response to JMS.
But here case is different. e.g. RFC --> PI --> JMS and reply will get back from JMS to RFC. So definetly in this case response will come from sender JMS and not from receiver JMS.
Read sec 2.8 throughly, you will come to know how to set the queue names dynamically for RECEIVER JMS Adapter.
Regards,
Sarvesh

File to file scenario: EOIO queue name?

hi forum,
i have file to file system, in the sender file communication channel,
i need to use qualit_of_service as "EOIO", but for that i need to use a Queue Name, what should i give as the name of the queue, for test purpose i gave the name of the queue as "xyz", but it works........
but i dont know how it worked

hI SUMIT,
i have a question for long,
i have a typical file BPM file scenario,
when the scenario run....i can see two rows in the MONI, one from sender service to the BPM, and the other from BPM to the Receiver service,
in the moni there is a column called Queue Id,
as i mentioned .... the row in MONI corresponding to Sener service to BPM, the queue ID is always XBQO* ....... as far as i have read, 'Q' in XBQO signifies that it is queue RFC, and it is so even if my file sener sends it using EO(transactional RFC), means no matter how i configure my sender file channel(EO or EOIO), it shows the Queue Id as XBQO*,
i assume that XBQO* means queue-RFC
and XBTO* means Transactional RFC,
pls help

Why do the queue names appear to include jms-module name (+!) ?

We upgraded our domain from weblogic 8.1 to 10.3.2.
To get the clustered environment to work, I had to delete the jms-module and recreate (including the FileStore, the Jms-server...).
After doing all this, When examining the Jms-server Active Destinations,
(In Settings - Monitoring - Active Destination)
I see the queue names such as:
jms-moduleName!queueName
I can't help but think this is related to this error message in the logs;
No servers found having jms destination queueName.
In our single server environment. I did not have to delete and recreate the autogenerated Jms-module and in Active Destinations, the Name shows up as I would expect. In this environment, I do not have the same error as above.
Is there anyway to stop the prefix, 'jms-moduleName!" from being added to the queue name in Active Destinations?
How and why is this being added?
Any comments would be greatly appreciated. THANKS.

Hi,
Almost all applications use a destination's JNDI name to look it up (see the JNDI name field for each destination). The "jms-moduleName!queueName" syntax your referenced is generated based on the configured name of the destination, not the JNDI name.
Some side advice since your setting up a new configuration:
* If your using distributed destination, I advise taking the opportunity to change your configuration to use the simpler"uniform distributed destination" option. 8.1 and older supported only the older "weighted distributed destination" behavior which requires that each member destination be configured individually -- this is unwieldy, and will (hopefully) be deprecated soon.
* See [ JMS Configuration Best Practices | http://download.oracle.com/docs/cd/E14571_01/web.1111/e13738/best_practice.htm#CACJCGHG ] and [ JMS Performance and Tuning Check List | http://download.oracle.com/docs/cd/E14571_01/web.1111/e13814/jmstuning.htm#PERFM294 ].
* Always configure quotas and paging, and ensure they are tuned to prevent JVM out-of-memory (as per the JMS Perf and Tuning check list referenced above).
Hope this helps,
Tom
Edited by: TomB on Jun 20, 2010 7:00 PM

Queue name not appearing in SMW01

Hi,
we have a below mentined filter setting for material replication.
MAKT SPRAS BT Between low and high value (Low <= x <= High) AA ZZ I Inclusive defined set/array
MARA MATKL BT Between low and high value (Low <= x <= High) 500000000 699999999 I Inclusive defined set/array
MARA MTART EQ Equality (= Low) UNBW I Inclusive defined set/array
MARA MTART EQ Equality (= Low) DIEN I Inclusive defined set/array
MARA MTART EQ Equality (= Low) ERSA I Inclusive defined set/array
MARA MTART EQ Equality (= Low) HIBE I Inclusive defined set/array
MARA PSTAT CP Contains Pattern E I Inclusive defined set/array
we have deactivated MLAN table under Tables/structures with in object.After these settings we observed that we arenot able to find the Queue name in SMW01.And also we are not able to replciate the material which are having chinese descrption(ZH is the code).
Is there any way that we can replicate these materials.please advise
regards
subbu

One question:
You last filter line item:
MARA PSTAT CP Contains Pattern E
or
MARA PSTAT CP Contains Pattern E*

In case of EOIO , then QUEUE NAME in File Adapter

Hi
   I'm using File Adpater in the Sender side   (FTP ).. and in the processing parameters if i choose the Quality of Service : EOIO   then system was asking as next parameter is Queue Name .--?
   Here   what can we give as queue name.. Is that is the new name.. Or any existed queue name... how we can identify that particular queue   name..
helpful answers will be appriciated
regards
Jain

>    I'm using File Adpater in the Sender side   (FTP ).. and in the processing parameters if i choose the Quality of Service : EOIO   then system was asking as next parameter is Queue Name .--?
>
>    Here   what can we give as queue name.. Is that is the new name.. Or any existed queue name... how we can identify that particular queue   name..
Go through this...
XI Asynchronous Message Processing: Understanding XI Queues -Part I

Change Queue Name in Sender Soap Adapter (or make it dynamic)

Hello SDN!!!!
We have a scenario where we want to make a message EOIO and I have set the Queue Name in the Sender Soap Adapter and this works great. BUT it is needed to have a more specific queue name (based on order numbers not interface name) So with this being said, Is there any way to change the queue name or append to it from the Soap Sender Adapter. I see it is possible to write a Module Bean, but the Message object returned from the ModuleContext is a scaled down version of the normal message object. Any help would be greatly appreciated
Cheers
Devlin

Is this the only way to change the queue name for Soap Sender? I don't think it is possible for them to do this, as their urls are static when calling us

Dynamic queue name with JMS Queue XML?

Hi,
Is it possible to use dynamic queue name with JMS Queue XML?
I tried using a variable in the JNDI URL, and supply the value in a package. I specified the following in the JNDI URL in the Topology:
e.g.
<JMS_RESOURCE>?d=<DTD_FILE>&s=<SCHEMA>&JMS_DESTINATION=#PROJECT_NAME.dest_var
I declared and set the variable in a package, then tried to load data from the above data server to database. But executing this package gave me the following error:
7000 : null : java.sql.SQLException: javax.jms.JMSException: Cannot find the target in JNDI (#PROJECT_NAME.dest_var)
java.sql.SQLException: javax.jms.JMSException: Cannot find the target in JNDI (#PROJECT_NAME.dest_var)
 at com.sunopsis.jdbc.driver.bg.executeQuery(bg.java)
 at com.sunopsis.jdbc.driver.bh.executeQuery(bh.java)
 at com.sunopsis.jdbc.driver.l.f(l.java)
 at com.sunopsis.jdbc.driver.l.executeUpdate(l.java)
 at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execSrcOrders(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
 at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
 at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
 at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
 at com.sunopsis.dwg.cmd.e.i(e.java)
 at com.sunopsis.dwg.cmd.g.y(g.java)
 at com.sunopsis.dwg.cmd.e.run(e.java)
 at java.lang.Thread.run(Unknown Source)
Am I doing it wrongly?
Thanks!

hi,
as it's not in Adapter-Specific Message Properties
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
looks like you cannot do it with jms adapter in standard
use proxy or your own adapter instead
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Specifying queue name in SOAP sender channel

Hi
We are on XI 3.0 SP18 - I have a requirement in which a soap webservice exposed out of the XI box - is to be called in an asynchronous mode - the webservice posts - document onto R/3 using an ABAP server proxy.
Now, there is also a need to post documents onto R3 - by serializing through an object key - material number ( say updates to a material ). I saw that there is a queue name in the soap sender channel setting when I choose eoio - qos . Is this queue name static ?
Also, any suggestions on how I can serialize the calls to the webservice based on an object key ( material number is supplied by the soap client ) all the way to R3 ( I am using a ABAP server proxy on the R3 side )

Ravi
I am looking for way to specify a non-static queue name here - so that I could establish a queue based on an object key from the source - web service client all the way to R3 - I wanted to know the options available on specifying the queue name in the communication channel -
Thanks...

JDBC Adapter Queue Name

I am trying to use EOIO in Sender JDBC Adapter. How are Queue Names Admnistered? Or how are the queues maintained?
Any help appreciated.
Regards
Mike

Hi,
You can give any names for the Queues in the sender adapter for EOIO.
This you can not see, in the SMQ2 until it is not stuck. Totally it will add the given name with XBQ*
Related blog-
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
For more~
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
Regards,
Moorthy

Queue Name Configuration

Similar Messages

Maybe you are looking for