Queue name in sxmb_moni
Hi
In SXMB_MONI whether we will see queue name or queue ID ?? In either case which queue name or ID is that ?? we have different queus's like Inbound, Outbound, IS sender side queue, IS receiver side queue etc. So which queus information that we see in SXMB_MONI ??
Thanks
kumar
Kumar,
Do u remember the other thread which we are discussing about Registering the queues. Ok lets consider File-to File scenario, in SXMB_MONI if everything is success and u look in the queue it will take u to Outbound queue only bcoz the scenario is success. Similarly if u de-register the inbound queue and check in the sxmb_moni now u will see the queue which will show u inbound queue. Since the messages are flowing very fast in the scenario we can able to see only outbound queue, only we will see the inbound queue if it got stucked or we de-register the queues.
Hope it clears, if not reply!!!
Best regards,
raj.
Similar Messages
-
Queue name not appearing in SMW01
Hi,
we have a below mentined filter setting for material replication.
MAKT SPRAS BT Between low and high value (Low <= x <= High) AA ZZ I Inclusive defined set/array
MARA MATKL BT Between low and high value (Low <= x <= High) 500000000 699999999 I Inclusive defined set/array
MARA MTART EQ Equality (= Low) UNBW I Inclusive defined set/array
MARA MTART EQ Equality (= Low) DIEN I Inclusive defined set/array
MARA MTART EQ Equality (= Low) ERSA I Inclusive defined set/array
MARA MTART EQ Equality (= Low) HIBE I Inclusive defined set/array
MARA PSTAT CP Contains Pattern E I Inclusive defined set/array
we have deactivated MLAN table under Tables/structures with in object.After these settings we observed that we arenot able to find the Queue name in SMW01.And also we are not able to replciate the material which are having chinese descrption(ZH is the code).
Is there any way that we can replicate these materials.please advise
regards
subbuOne question:
You last filter line item:
MARA PSTAT CP Contains Pattern E
or
MARA PSTAT CP Contains Pattern E* -
In case of EOIO , then QUEUE NAME in File Adapter
Hi
I'm using File Adpater in the Sender side (FTP ).. and in the processing parameters if i choose the Quality of Service : EOIO then system was asking as next parameter is Queue Name .--?
Here what can we give as queue name.. Is that is the new name.. Or any existed queue name... how we can identify that particular queue name..
helpful answers will be appriciated
regards
Jain> I'm using File Adpater in the Sender side (FTP ).. and in the processing parameters if i choose the Quality of Service : EOIO then system was asking as next parameter is Queue Name .--?
>
> Here what can we give as queue name.. Is that is the new name.. Or any existed queue name... how we can identify that particular queue name..
Go through this...
XI Asynchronous Message Processing: Understanding XI Queues -Part I -
Change Queue Name in Sender Soap Adapter (or make it dynamic)
Hello SDN!!!!
We have a scenario where we want to make a message EOIO and I have set the Queue Name in the Sender Soap Adapter and this works great. BUT it is needed to have a more specific queue name (based on order numbers not interface name) So with this being said, Is there any way to change the queue name or append to it from the Soap Sender Adapter. I see it is possible to write a Module Bean, but the Message object returned from the ModuleContext is a scaled down version of the normal message object. Any help would be greatly appreciated
Cheers
DevlinIs this the only way to change the queue name for Soap Sender? I don't think it is possible for them to do this, as their urls are static when calling us
-
Dynamic queue name with JMS Queue XML?
Hi,
Is it possible to use dynamic queue name with JMS Queue XML?
I tried using a variable in the JNDI URL, and supply the value in a package. I specified the following in the JNDI URL in the Topology:
e.g.
<JMS_RESOURCE>?d=<DTD_FILE>&s=<SCHEMA>&JMS_DESTINATION=#PROJECT_NAME.dest_var
I declared and set the variable in a package, then tried to load data from the above data server to database. But executing this package gave me the following error:
7000 : null : java.sql.SQLException: javax.jms.JMSException: Cannot find the target in JNDI (#PROJECT_NAME.dest_var)
java.sql.SQLException: javax.jms.JMSException: Cannot find the target in JNDI (#PROJECT_NAME.dest_var)
at com.sunopsis.jdbc.driver.bg.executeQuery(bg.java)
at com.sunopsis.jdbc.driver.bh.executeQuery(bh.java)
at com.sunopsis.jdbc.driver.l.f(l.java)
at com.sunopsis.jdbc.driver.l.executeUpdate(l.java)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execSrcOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Am I doing it wrongly?
Thanks!hi,
as it's not in Adapter-Specific Message Properties
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
looks like you cannot do it with jms adapter in standard
use proxy or your own adapter instead
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Specifying queue name in SOAP sender channel
Hi
We are on XI 3.0 SP18 - I have a requirement in which a soap webservice exposed out of the XI box - is to be called in an asynchronous mode - the webservice posts - document onto R/3 using an ABAP server proxy.
Now, there is also a need to post documents onto R3 - by serializing through an object key - material number ( say updates to a material ). I saw that there is a queue name in the soap sender channel setting when I choose eoio - qos . Is this queue name static ?
Also, any suggestions on how I can serialize the calls to the webservice based on an object key ( material number is supplied by the soap client ) all the way to R3 ( I am using a ABAP server proxy on the R3 side )Ravi
I am looking for way to specify a non-static queue name here - so that I could establish a queue based on an object key from the source - web service client all the way to R3 - I wanted to know the options available on specifying the queue name in the communication channel -
Thanks... -
I am trying to use EOIO in Sender JDBC Adapter. How are Queue Names Admnistered? Or how are the queues maintained?
Any help appreciated.
Regards
MikeHi,
You can give any names for the Queues in the sender adapter for EOIO.
This you can not see, in the SMQ2 until it is not stuck. Totally it will add the given name with XBQ*
Related blog-
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
For more~
http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
Regards,
Moorthy -
Help on Dynamic queue name in JMS Adapter
Hi Experts,
Could you please explain how to configure dynamic queue name in JMS Adapter.
My requirement is i would have to add the date and time to JMS Queue Name in receiver JMS Adapter.
Thanks in Advance
Chillahi,
as it's not in Adapter-Specific Message Properties
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
looks like you cannot do it with jms adapter in standard
use proxy or your own adapter instead
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
How to get back Queue name in SMQ1 when Data source is present in RSA7
Hello Friends,
Its very urgent issue.Please provide me your valuable solutions.
1) I have Queue name in SMQ1 and Data source name in RSA7 are present for particular Data source in CRM source system. I deleted Queues in SMQ1 and they present in RSA7 so whenever I do changes in Data source record that changes i can see in RSA3 and DB table but I can't able to see that changes in RSA7.
2) That Data source is Delta enabled and Initialization also set for that.
3) when i do delta scheduling no records are coming in BI side.
Please tell me how can i get back my Queue in SMQ1 and get changes reflects in RSA7 data source also.Try below:
http://sharepoint247.wordpress.com/2013/05/24/handy-email-utility-for-any-sharepoint-project/
interface IEmailConfigurationManager
/// <summary>
/// Gets Email Template by it's ID
/// </summary>
/// <param name="emailTemplateId"></param>
/// <returns></returns>
EmailTemplate GetEmailTemplate(string emailTemplateId);
/// <summary>
/// Gets Email Template by it's ID by updating the email template properties
/// </summary>
/// <param name="emailTemplateId"></param>
/// <param name="subjectProperties"></param>
/// <param name="bodyProperties"></param>
/// <returns></returns>
EmailTemplate GetEmailTemplate(string emailTemplateId,
IDictionary<string, string> subjectProperties,
IDictionary<string, string> bodyProperties);
/// <summary>
/// Add new email template.
/// </summary>
/// <param name="emailTemplateId"></param>
/// <param name="emailTemplateSubject"></param>
/// <param name="emailTemplateBody"></param>
void AddEmailTemplate(string emailTemplateId, string shortDescription,
string emailTemplateSubject, string emailTemplateBody);
https://spemailutility.codeplex.com/
http://social.msdn.microsoft.com/Forums/en-US/ef945d33-50c5-4b89-8bb9-32a95498b419/how-to-change-email-template-for-the-approval-workflow?forum=sharepointcustomizationlegacy -
Passing the queue name to the sender JMS adapter at run time..
Hello Experts,
I have a scenario where PI is to pick data from MQ queues. The message type coming from queues is same and the procession needs to be done with PI is also the same.That's the reason why we want to have only one interface processing the data for all the queues.
My question here is that is there any way where I do not put the queue name in the sender adapter at design time and based on the data availability in the queue let the sender adapter know the queue name to be processed at run time.
Any suggestions will be greatly appreciated.
- Rajan> My question here is that is there any way where I do not put the queue name in the sender adapter at design time and based on the data availability in the queue let the sender adapter know the queue name to be processed at run time.
Unfortunately for JMS Sender CC it is not possible, but other way around is possible. I.e. you can dynamically choose the receving queue names by using ASMA "JMSReplyTo" in JMS Sender CC.
Regards,
Sarvesh -
JDeveloper - ESB / BPEL - JMS Adapter - prefix queue name with db schema
When I use the JMS Adapter in ESB to create a new message queue producer or consume using database (AQ) I'm experiencing a problem when selecting the queue.
I can browse the queue in the database but when I have selected the queue JDeveloper prefix it with the schema name owning the queue.
Example:
java:comp/resource/DocumentQueueResourceProvider/Queues/QUEUES.DOCUMENT_IMPORT_QUEUE
Schema owner is QUEUES and the name of the queue is DOCUMENT_IMPORT_QUEUE.
The problem is when I try to use it its unable to look up the queue and I have to manually remove the prefix from .wsdl file before deploying it - as with setting mcf.IsTransacted='false'.
When the resource provider finds the queue and exposes it in the JNDI three it does it without the prefix.
Question: How do I either:
a) make the schema prefix be removed by JDeveloper
b) make the resource provider prefix the queue name with the schema name.
Anybody?
Best regards
Christian DamsgaardTry this:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema targetNamespace="http://www.yourcompany.com/msg"
xmlns:tns="http://www.yourcompany.com/msg"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
nxsd:encoding="ASCII" nxsd:stream="chars" nxsd:version="NXSD"
elementFormDefault="qualified" attributeFormDefault="unqualified">
<xsd:element name="rootnode" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eof}"/>
</xsd:schema>
This will result in a single node xml.
Edited by: user472896 on Sep 22, 2010 10:29 AM -
Queue name in QOS EOIO -Sender SOAP Adapter
hi,
While configuring sender soap adapter , if we specify EOIO as QOS , then there is a mandatory parameter Queue name to be specified.
What is this Queue name ?
and where is it created
kindly reply
Regards,
loveenaHi D' souza
Goto tcode -> SXMB_ADM -> register queues
for specifying QOS EOIO you need to assign a queue
from there you can specify the queue for Outbound side EOIO queue
Various queue name and there meaning is as follows
XBT*-Queues for Exactly Once.and time dependent
XBQ*-Queues Exactly Once In Order.
XBTI* are inbound queues for EO with time constarint
XBTO* are outbound queues for EO with time constarint
XBQI* are inbound queues for EOIO
XBQO* are outbound queues for EOIO
for beter understanding of how to configure sender soap channel you may folow this link
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
thanks
sandeep
if helpful reward points
Thanks
sandeep
if helpful rewrad points -
Hi All,
I have a simple scenario: JMS --> XI --> SAP R/3 (file adapter).
The sender adapter have e QoS = EO.
The message is splitted in two interfaces in order to apply two different mappings for the same sent message.
I have noted in the trace of the sxi_monitor the followings:
<Trace level="1" type="T">Queue name : XBTI0001</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0001</Trace>
and
<Trace level="1" type="T">number of receivers: 2</Trace>
<Trace level="1" type="T">Multi-receiver split case</Trace>
<Trace level="1" type="T">Persisting initial (pre-split) message</Trace>
<Trace level="1" type="T">Persisting split messages (split kids)</Trace>
<Trace level="1" type="T">-----------------------------------------------</Trace>
<Trace level="1" type="T">Splitting loop start</Trace>
<Trace level="1" type="T">-----------------------------------------------</Trace>
<Trace level="1" type="T">Split Induced Change EO -> EOIO with QId: XI_SERIALIZE0096</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBQO0___XI_SERIALIZE0096</Trace>
I know that the queue has changed from EO to EOIO because of the settings on the interface det.(Mantain Order at Runtime),
but I wonder where the System has taken the name for the generated queue:XBQO0___XI_SERIALIZE0096.
Is there a place to set that name?
Thanks
EmilianoThanks Patrick,
I already have read the article, but there is not the answer to my question.
I put the question because I have two identical queue names for two messages sent in two different days:
The result of TXC SMQ2:
Queue_____________________Date_______Time__Status
XBQO0___XI_SERIALIZE0096 12.02.2008 08:05:59 Error <--- The first one has an error in the mapping and blocks the other one
XBQO0___XI_SERIALIZE0096 09.05.2008 00:21:00 Registered <-- This one is blocked by the first one.
Why does the messages has got the same queue name? -
Wrong Reciever message interface name in SXMB_MONI in PI7.1
Hi All,
Some of the interfaces that are getting executed in PI7.1 have wrong reciever message interface name in SXMB_MONI view.
In SOAP Envelope
1.Reciever message interface name is getting populated in <SAP:Sender> tag and
2. Sender message interface name is getting populated in <SAP:Receiver> tag.
But the end to end message flow is getting executed succesfully.
It is not particular to any one of the interfaces. It is occuring randomly.
Did any one encounter this problem earlier?Please share your inputs to resolve the same.
Thanks,
Younus.Hi,
The SAP note mentioned - contains details specific to SOAP Adapter.
The problem which we have mentioned is occurring across adapters.
Even in SICF transaction. All the details have been correctly maintained.
Any further steps to resolve the issue will be helpful.
Thanks,
Younus -
JMS Queue Vs JMS replyTo Queue name for Receiver JMS channel.
HI,
I am working with receiver JMS adapter and using the protocol WbeSphereMQ JMS provider.
Here I could not able to figure out the difference between the following parameter.
Target tab JMS Queue and Processing tab-JMS replyTo Queue name.
I tries the find the same in help.sdn.com but here also not able to find correct information .
for Processing tab -JMS replyTo Queue name Parameter it is written that "Specify the name of the queue to which the responses are to be sent."
But what is the use of Target tab JMS Queue Parameter. No information is given against this parameter.
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/frameset.htm
regards,
Navneet.the initial JMS Queue is the queue you will connect too.
i guess SAP felt an explanation to that was not required....
SAP does not even bother to explain it here in the specific link to JMS-Provider-Specific Settings (for Webshpere although it does for SonicMQ!).
http://help.sap.com/saphelp_nw04/helpdata/en/c1/739c4186c2a409e10000000a155106/frameset.htm
I do not use the "ReplyTo" in my current scenarios.
Maybe you are looking for
-
Can we call a FM in ECC from BI
Hello, We have a requirement where in we need to call a FM in ECC from BI transfer routine, Can some help me in achieving this. This requirement is for a real time cube, so will there be any performance impact at the time of report execution? Thanks,
-
Workflow not triggering when changing Item-level Permissions in Sharepoint 2013 list
Scenario: We have a custom list in Sharepoint 2013 that we use for Case Management. We have a workflow that triggers on a created item generated from an email. The user then gets a reply with a link to his own case. I want the users only to be able t
-
Why is my battery running down on an iPhone 4 running iOS 7?
Why is my battery running down on my iPhone 4 when I'm not using my phone and all apps are closed? My phone will have a full charge at night, no apps running. Bluetooth is off, automatic updates are off, backgroud app refresh is off, and by morning
-
Error year format in statements in FLASHBACK_TRANSACTION_QUERY.UNDO_SQL
I execute 20 delete on tab1 table and then COMMIT. flashback is enabled: in table FLASHBACK_TRANSACTION_QUERY field UNDO_SQL I can found all statements for undo: in this case I found exactly 20 insert of 20 rows that I deleted. the problem is in date
-
Hiding Event Charts within Bidding Tab of an Auction
Hi Guys, I need help on a particular requirement. This query is related to Auctions within E-Sourcing. The client wants us to hide the 'Event Chart' sub window within the bidding tab of an auction. I tried to resolving this through Page Customization