Queue Processing is not working

Hi,
I have the following situation:
4 files are combined in an inbound proxy and in that inbound proxy several individual outbound proxys are executed.
The outbound proxy sends an Idoc from the integration server to a SAP ECC system.
I want the Idocs to be processed serialized.
I've marked the checkbox for 'queue processing' in the receiver channel of the Idoc adapter but I doesn't seem to work.
Also I can't define the quality of service (which is EO instead of EOIO) and a queue.
Can anyone give me a tip how to handle this? What do I have to do more?
Kind regards
Maarten

Hi Maarten,
The sequence at the Integration Server inbound or outbound channel can only be guaranteed if only IDocs are processed, and not if different protocols (for example, IDocs and proxies) are processed together.
Do not confuse IDoc serialization using the IDoc adapter with the ALE serialization of IDocs.
Check this help:
http://help.sap.com/saphelp_nw04/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/content.htm

Similar Messages

Update process does not work on Tabular Form

Hello,
I have 2 tabular forms on one page, which are using manual update processes.
First form is created using wizard, and therefore works perfectly.
The update process is as follows:
DECLARE
lc_string VARCHAR2(4000);
BEGIN
FOR i IN 1..APEX_APPLICATION.G_f01.COUNT
LOOP
     lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*03*(i) || '|' || APEX_APPLICATION.G_f*04*(i) || ']';
END LOOP;
--Database processing using the concatenated string here
END;Second form is created manually, using the following code:
SELECT apex_item.checkbox (30,
                           '#ROWNUM#',
                           'onclick="highlight_row(this,' || '#ROWNUM#'|| ')"',
                           NULL,
                           'f30_' || '#ROWNUM#'
                          ) delete_checkbox,
       CATALOG_ID,
          apex_item.hidden (31, CATALOG_ID)
       || apex_item.text (32,
                          LANG,
                          80,
                          100,
                          'style="width:100px"',
                          'f32_' || '#ROWNUM#'
       || apex_item.hidden (33, wwv_flow_item.md5 (LANG, DESCRIPTION)) LANG,
       apex_item.text (34,
                       DESCRIPTION,
                       80,
                       100,
                       'style="width:255px"',
                       'f34_' || '#ROWNUM#'
                      ) DESCRIPTION
FROM V_CATALOGS
UNION ALL
SELECT     apex_item.checkbox
                          (30,
                           TO_NUMBER(9900 + LEVEL),
                           'onclick="highlight_row(this,' || '#ROWNUM#' || ')"',
                           NULL,
                           'f30_' || TO_NUMBER (9900 + LEVEL)
                          ) delete_checkbox,
           NULL,
              apex_item.hidden (31, NULL)
           || apex_item.text (32,
                              NULL,
                              80,
                              100,
                              'style="width:100px"',
                              'f32_' || TO_NUMBER (9900 + LEVEL)
           || apex_item.hidden (33, NULL) LANG,
           apex_item.text
                                           (34,
                                            NULL,
                                            80,
                                            100,
                                            'style="width:255px" ' ,
                                            'f34_'
                                            || TO_NUMBER (9900 + LEVEL)
                                           ) DESCRIPTION
      FROM DUAL
     WHERE :P18_TEMP = 'ADD_ROWS1'
CONNECT BY LEVEL <= 1However, the update process does not work on this form.
I created it using the first one as an example, but with the id's of the second form:
DECLARE
lc_string VARCHAR2(4000);
BEGIN
FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
LOOP
     lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*32*(i) || '|' || APEX_APPLICATION.G_f*34*(i) || ']';
END LOOP;
--Database processing using the concatenated string here
END;Also, both forms are opening in a modal pop-up dialog window.
I use a Dialog Region plug-in for that.
Please advise, what is causing a problem with update?

Sloger,
if this is your tabular form
SELECT apex_item.checkbox (30,
...and this is your update statement
FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
...Then you will only ever update records that have been checked. Unchecked checkboxes are not passed back in the global array. You need to have a hidden column with the ID's for the record and loop through that when you are updating/inserting. That is why the built in tabular form has a MRU and a MRD. the MRU loops through the hidden ID column. The MRD loops through the checkbox.
Thanks,
Tyson Jouglet

Batch process does not work in one service, but worked in another.

Hi Fellows,
We have here a batch process with a code encrypted, that runs daily in a production environment.
Tonight this batch process did not work.
It is expected that this process runs in about 20 seconds, but tonight this process used about 3 hours and did not finished.
We checked if it was concurrency, killed some sessions and tried again, and nothing has changed.
And then someone changed the service that this process uses, it was 'bat' and changed to 'dba'. And it worked succesfully in 11 seconds.
Here is the tnsnames that the batch process uses:
bat =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(FAILOVER=ON)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bat)
(FAILOVER_MODE =
(BACKUP = dba)
(TYPE = NONE)
(METHOD = BASIC)
(RETRIES = 20)
(DELAY = 5)
dba =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dba)
Do you guys know what could be the reason?
Thanks in advance.

We set the service which the app should connect.
These services are set in srvctl:
ora.cms.bat.cms1.srv ONLINE ONLINE on fastora1
ora.cms.bat.cms2.srv ONLINE ONLINE on fastora2
ora.cms.bat.cms3.srv ONLINE ONLINE on fastora3
ora.cms.bat.cs ONLINE ONLINE on fastora1
ora.cms.cms1.inst ONLINE ONLINE on fastora1
ora.cms.cms2.inst ONLINE ONLINE on fastora2
ora.cms.cms3.inst ONLINE ONLINE on fastora3
ora.cms.cmsuser.cms1.srv ONLINE ONLINE on fastora1
ora.cms.cmsuser.cms3.srv ONLINE ONLINE on fastora3
ora.cms.cmsuser.cs ONLINE ONLINE on fastora1
ora.cms.db ONLINE ONLINE on fastora1
ora.cms.dba.cms1.srv ONLINE ONLINE on fastora1
ora.cms.dba.cms2.srv ONLINE ONLINE on fastora2
ora.cms.dba.cms3.srv ONLINE ONLINE on fastora3
The batch process connects to a service [ bat ], but it hangs and don't finish. But when we change the service do dba is just pass in some seconds and finish succesfully.
Connected to DB [issr@bat ]
PAYware CMS Version 8.0 - Module : E352 Release : 000000002
Program: /cms/cmsissr/CMS/bin/issuer/mepcs352
Release: 2
PARAMETERS OK !!!
NUMBER OF PROC.: 000001
Number of transactions : +000047570
Number of parallel processes: 000001
Transactions by process: 000000000000047570
Transactions Processed: 000010000

"Ask to buy" and "Sign in to Approve" process is not working

Last weekend I setup Family Sharing for the first time, but the "Ask to buy" and "Sign in to Approve" process is not working. I am the Family Organizer and I created an account for my child under 13 with "Ask to buy" enabled. My child can go in to the App Store, click "Buy" for a desired app and I get a notification on my iPhone 5s... as expected. When I open the Notification I have the option to Decline or Approve. If I select Approve, a box pops up asking me to enter the password for my child's iCloud account to complete the request. (It seems odd to me that I'd have to enter his password instead of my own, but whatever.) So I enter his password and the box goes away for a second and then comes right back like I typed it wrong or something. I enter it again and again and always the same box comes back and the request is never completed. We've tried this several times over several days and always see the same behavior. I have also tried entering my password instead of his (since that makes more sense to me) but I encounter the same problem.
I have verified that I am signed in to my iCloud account and my iTunes account on my iPhone 5s. I have also verified that my son is logged in with his iCloud/iTunes account on his iPod touch, so why isn't this working? Additionally, if I disable "Ask to Buy" then I can successfully install apps on his iPod from the iPod itself.
Is it normal for the "Sign in to Approve" box to show his iCloud address instead of mine? And if so, why doesn't it complete when I enter his password? Am I missing something completely? This is driving me crazy.

Hi ,
When you click your link "Click here", the SharePoint web page with anchor will not work until refresh the page, if it's the case, you can add the javascript code to refresh the page automatically as workaround per the following similar post.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f7eab808-da8a-44fd-9933-f9b992f5affc/sharepoint-anchor-tags?forum=sharepointgeneralprevious
http://yalla.itgroove.net/2012/05/anchor-links-tags-in-sharepoint-2010/
<script type="text/javascript">
setTimeout(Reload,2000);
function Reload()
window.location.hash=self.document.location.hash.substring(1);
</script>
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Repeat processing does not work properly - label printing MB90

Hi,
I created a custom label for 261 & 262 movement types. For this i created a custom page formats and needed settings.
The system seems to behave strange. when i try to print from MB90 for processing mode 1. The form output is as desired.
But when i try to repeat processing for previously processed item, it doesn't show the font size and all properly.
I tried to debug, everything is fine, triggers right form, infact i debuged the form also its the correct one. But does'nt show output properly.
Also for the new data whne i process and do repeat proecessing print it works...
Why it does not work for existing data in the system? Why it is behaving strange when it picks up same form.
Regards,
Lalit Mohan Gupta.

This was because... the output type configuration was changed to different printer.
And that printer was not configured properly...
Regards,
Lalit Mohan Gupta.

Enforcing attachment to process level not working

I am trying to attach attachments (doc, pdf etc) at process level from task form but it goes to task level some how. I was able to verify that by looking into WFATTACHMENT table.
UI side
<af:selectOneRadio value="#{bindings.attachmentScope.inputValue}"
label="#{resources.UPLOAD_TO_PROCESS}"
id="uploadToProcAttach"
I am making sure attachmentscope is going as 'BPM' not 'TASK' by binding to my own managed bean and set scope to process level.
This is working because if I do URL instead of desktop file then URL attaches to process level. I verified this too by looking into WFATTACHMENT table.
So not sure why
addAttachmentBean.uploadFile no matter what attaches pdf, doc etc attachment to task level and also notices that WFATTACHMENT table has row for this record with taskID as something like f76a60ad-53f2-40dc-ac75-af53d64854e4 instead of taskID as process instance Id like 4000001.
I am using Oracle BPM 11.1.1.6.0 PS5.
Attaching URL to process level from a task is working but from the same task attaching real doucment to process level goes to task level.
I am not using UCM.
I really appreciate any inside.

Finally, I was able to solve this issue.
Project was migrated from Oracle BPM PS4 to Oracle BPM PS5 so some how human tasks created in earlier version were not working in new version for new functionalities (adding attachment to process level). When I deleted these human tasks and recreated in newer version. Everything started working great.
I am not sure it is Oracle bug issue or what....

Batch processing does not work with action

Here is the thing. I have implementes several action on Photoshop. SOme of the include several sub actions and different saving locations. For example, I open a file, then I hit my prefered key combo for that action, and I have:
1) convert to cmyk
2)save copy as JPG with 11 quality level
3) save to folder A
4) image size to 72 dpi
5) covert to RGB
6) save as JPG 6 quality level
7) save to folder B
8) close file and discard cahnges.
Everything runs like heaven, but the moment I want to batch several files everything stalls.
I choose file > Batch > Choose my set > choose my action
Source > I choose where my files are (usually a PDF)
then I use "Supress file open options dialogs"
Destination> Since I already have set destinations y my actions, I choose here a "dump" folder
On errors > I hit Save As... and put a name for that log.
Then photohop opens my PDF on Photoshop and does nothing! It keeps my file open.
I m gettting frustated here, because I ma about to work with 400 files to batch, and this batch system does not work.
I am using CS6
Any clues

Your action doesn't to seem to include any Open actions. Why do you have the "Supress" option enabled?
Also, since your action has the two save commands, you would just leave the Destination set to None. Setting a Destination means that is going to save the files again.
The problem you'll run into though is that the action also saves the file name as part of the action, so that you'll end up just saving over the one file each time the action is played back on your 400 files. So Photoshop will process all the files, but each time it will overwrite the first file, so you'll end up with one file in each folder. Normally, in these situations, you'd use the Destination setting and use the "Overrride Action "Save As" Commands", which would substitute the Destination folder for whenever a Save command is used. The problem here is that you can only choose a single destination folder, so all files would be saved to the same location.
Short of scripting this, it may be best to break this into two separate actions.

DB Adapter polling as singleton process is not working as expected

Am using poller DB adapater to control the transaction per seconds to the downstream system and i want this poller process as singleton (One instance should be in running state at a time).
As suggested in oracle documents , below is the parameters configured in composite.xml file.
<service name="polling_Mange_Alert_Events"
ui:wsdlLocation="polling_Mange_Alert_Events.wsdl">
<interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt)"/>
<binding.jca config="polling_Mange_Alert_Events_db.jca">
<property name="singleton">true</property>
</binding.jca>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
override="may">1</property>
<property name="jca.retry.backoff" type="xs:int" many="false"
override="may">2</property>
<property name="jca.retry.maxInterval" type="xs:string" many="false"
override="may">120</property>
</service>
Below is the JCA file parameters configured :
<adapter-config name="polling_Mange_Alert_Events" adapter="Database Adapter" wsdlLocation="polling_Mange_Alert_Events.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/vff-int-fus" UIConnectionName="PT_APPINFRA" adapterRef=""/>
<endpoint-activation portType="polling_Mange_Alert_Events_ptt" operation="receive">
    <activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
      <property name="DescriptorName" value="polling_Mange_Alert_Events.ManageAlertEvents"/>
      <property name="QueryName" value="polling_Mange_Alert_EventsSelect"/>
      <property name="MappingsMetaDataURL" value="polling_Mange_Alert_Events-or-mappings.xml"/>
      <property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
      <property name="MarkReadColumn" value="TRANSACTION_STATUS"/>
      <property name="MarkReadValue" value="Processing"/>
      <property name="PollingInterval" value="10"/>
      <property name="MaxRaiseSize" value="5"/>
      <property name="MaxTransactionSize" value="5"/>
      <property name="NumberOfThreads" value="1"/>
      <property name="ReturnSingleResultSet" value="false"/>
      <property name="MarkUnreadValue" value="Pending"/>
    </activation-spec>
</endpoint-activation>
</adapter-config>
This poller process is running on clustered environment (2 soa nodes) and it is not working as expected as singleton process.
Please advise to solve this issue ?

Hi,
1.Set Singleton property outside   <binding.jca> like this:
<binding.jca config="polling_Mange_Alert_Events_db.jca"/>
<property name="singleton">true</property>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
2.Also you can try setting these values in jca file:
<property name="RowsPerPollingInterval" value="100"/>
<property name="MaxTransactionSize" value="100"/>
3. try to increase the polling interval time.
Regards,
Anshul

Invocation of Application Process does not work in 3.1?

Hi
I invoke APPLICATION PROCESS successfully in APEX 3.0 (for RSS, WAP, Google Site Map file generation). See http://www.mujnotes.cz/pls/htmldb/f?p=9774:::APPLICATION_PROCESS=TEST
The same code does not work in APEX 3.1 (apex.oracle.com environment). The introductionary application page is shown instead of process result, see http://apex.oracle.com/pls/otn/f?p=9774:::APPLICATION_PROCESS=TEST.
The processes have "No Authorisation Required" set.
Do you have any glue what's the problem?
Thanks
Roman

Scott
it uses user authentication scheme. It works well for a common login into application.
Authentication Function CALL:
return user_auth
Authentication Function DEFINITION:
create or replace function user_auth (p_username in VARCHAR2, p_password in VARCHAR2)
                         return BOOLEAN
                         is
                         l_password varchar2(4000);
                         l_stored_password varchar2(4000);
                         l_count number;
                         begin
dedicated application table is used to store and check user name and password
                         end;
Roman

My process does not work, with request!

Hi, I have a process which make some changes.
Here is the condition:
Request = Expression 1
Expression 1:
SOLVE
I have a list. One of items send a request SOLVE.
It doesn't work.
When I call this process using button, it works.
Please, help me!
Regards, Kostya Proskudin

Kostya,
In your example the process does not fire in either case.
It does not fire when the list item is clicked because, although the URL has SOLVE in the request position, the process in question is an after-submit process. Using the link, you just show the page, so after-submit events don't fire.
In the button case, which does submit the page, the button request value is set to TEST_BUTTON, so the process does not fire because it needs a request value of SOLVE. I'm sure it works in your real application, though.
Scott

Leave to List processing is not working

Hi all,
I am displaying data in separate window using Window stratin at '' ''
ending at '' ''.
in screen PBO.
SUPPRESS DIALOG.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
PERFORM output.
everything is working fine.but its not showing the whole output .
even if i scroll .
what am i did wrong...?

Hi,
Its my bad, i am using
CALL SCREEN 1000 STARTING AT 01 01
                   ENDING   AT 150 50.
MODULE status_1000 OUTPUT.
PERFORM include_exclude_function USING sy-dynnr.
SET PF-STATUS 'AAA' EXCLUDING fcodes.
SET TITLEBAR '1000'.
SUPPRESS DIALOG.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
PERFORM output.
ENDMODULE.                 " STATUS_8000 OUTPUT

Page Process Does Not Work When Column for APEX_ITEM.HIDDEN is not shown

I have created a Report Region based on a SQl Query. In the query I have three columns that need to be within an array, but 2 of the 3 columns should not be displayed on the report. Therefore, I don't have Show checked for them in the Column Attributes of the Report Region.
In my testing, if I don't display the columns that are within the arrays on the report and run the page process to insert records into a table, I receive the error of "no data found". In reverse, if I display the columns, my insert is successful.
Is this how the arrays work? Or is there something I have not done correctly.
Below is the query for the Report:
SELECT APEX_ITEM.CHECKBOX(1,ROWNUM,'CHECKED')ATTENDED,
APEX_ITEM.HIDDEN(2,C.PARTY_ID) ID, -----this is the column I want to hide-----
APEX_ITEM.HIDDEN(3,C.PARTY_TYPE_CODE) PTYP, ----this is the column I want to hide----
C.PARTY_TYPE_CODE,
S.PERSON_ID,
S.PERSON_FIRST_NAME AS NAME,
C.PARTY_CASE_ID
FROM CASE.PARTY C
INNER JOIN DN.PERSON S
ON C.PARTY_ID = S.PERSON_ID
WHERE C.PARTY_CASE_ID = :P18_CDBCASE_ID
AND C.PARTY_SEQ_NO = :P18_SEQ
Thanks,
Keisha
Edited by: user4579720 on Sep 16, 2009 2:30 PM

Keisha,
If you uncheck the "show" option, then the corresponding HTML for that item is not rendered on the page. Thus, when you try to inspect that item via APEX_APPLICATION.G_F02, it simply doesn't exist.
One trick that I use when I want to have hidden items on the page, but not make them take up any space, is to concatenate them to items that will be visible.
Using your query as an example, I would re-write it like this:
SELECT APEX_ITEM.CHECKBOX(1,ROWNUM,'CHECKED')ATTENDED,
APEX_ITEM.HIDDEN(2,C.PARTY_ID)
|| APEX_ITEM.HIDDEN(3,C.PARTY_TYPE_CODE)
|| C.PARTY_TYPE_CODE PARTY_TYPE_CODE,
S.PERSON_ID,
S.PERSON_FIRST_NAME AS NAME,
C.PARTY_CASE_ID
FROM CASE.PARTY C
INNER JOIN DN.PERSON S
ON C.PARTY_ID = S.PERSON_ID
WHERE C.PARTY_CASE_ID = :P18_CDBCASE_ID
AND C.PARTY_SEQ_NO = :P18_SEQThus, the second APEX report column will contain the HTML for the hidden items PARTY_ID & PARTY_TYPE_CODE, as well as the value for PARTY_TYPE_CODE. When you submit the page, you should not encounter any issues.
Thanks,
- Scott -
http://sumnertechnologies.com/
http://spendolini.blogspot.com/

Camera Process 2010 not working in Lightroom 3

i can not use noise reduction in Camera Process 2010 on scanned images in lightroom 3 but camera process 2003 working fine.
I am using scanned tiff images and converting them to adobe DNG.
also camera process 2010 and 2003 work with camera raw iamges wiht my camera or wiht any other camera raw iamge but not with scanned one.
does anybody know the difference between Camera Process 2010 and 3?

do some reading on the new version like the readme etc. There is a lot of difference between the process version, mainly on denoising and demosaicing
What kind of scanner are you using?

OSB singlethreaded processing PS not working when delivery failure is set

Hi,
Below is my process flow
JMSQ -> JMS PS -> BS - > Endpoint
So i have the requirement to send the messages one at a time so i did 2 settings
1. JMS connection -> Max messages per session =1
2. Created WorkManager with Max threads 1
This works fine in case of normal processing
But now i have a requriement to add a redelivery limit and redelivery interval in the Queue to route to error queue in case of error
So in the delivery failure tab i changed the values..
So when i do this change all the messages are consumed at once retried and roll backed. I need messages to be consumed one by one and retried.
Am i missing some thing? Or singletonprocessing wont work with ReDelivery can anyone please suggest?
Appreciate your help.

Any suggestions on this?

Toggle Option in Process Chain not working

Hello SDNers,
I am experiencing the below scenario with one of my process chain.
Process Chain FLow
Start
|
|
Local Chain (To delete the already existing file from Application Server(ZFTP))
|
Local chain to rename the file
|
|
Local chain (Load data to cube)
|
|
Local chain to backup a file from Appl. Server
In the above flow, the step 2 has been set to proceed further even if there are no files to delete in the application server. To achieve this I am using a toggle option between the step 2 and 3.
At times, the chain progress further when there are no files to delete as expected but not all the times.
I am trying to figure why the step which is supposed to progress further is not progressing some times even though it has been set to move further.
Any advice would be helpful.
Regards,
Vinoth

Hello Venkatesh,
Thank You for your Patience.
I have BW systems both running in the SAP_BW Versions 730 & 701.
I have checked the folders " Other BW Processes " & "Other" and below are the process types.
Other BW Processes
Attribute Change Run
Adjustment of Time-Dependent Aggregates
Deletion of Requests from PSA
Deletion of Requests from the Change Log
Execute Planning Sequence
Switch Realtime InfoCube to Plan Mode
Switch Realtime InfoCube to Load Mode
Reorganize Attributes and Texts for Master Data
Execute Analysis Process
Update Explorer Properties of BW Objects
Other
Event in SAP CPS
Job in SAP CPS
Last Customer Contact Update (Retraction)
Regards,
Vinoth V

Queue Processing is not working

Similar Messages

Maybe you are looking for