Queue status is stopped
Hi,
I have a File to Proxy assync. scenario. The file has been read, and then the message stops in the queue. I checked it on sxmb_moni, the message is posted on a queue and the queue status is "stopped" (with a red stop button printed on).
I have already read all the posts about this and couldn't find any solution... Can anyone help?
Thanks.
Shwetha
Yes connection is set proper now.
And the scenario involves EOIO
Since it is EOIO, i would suggest that you see the status of the messages in RWB (it may be in Holding)....if it is Holding then follow the lead given in this blog: /people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
Regards,
Abhishek.
Similar Messages
-
Setting QRFC Queue Status to STOP
Hello
We will be scheduling reports in Prod to auto restart stopped outbound and inbound QRFC queues. But before implementing these changes we need to know if these reports are working fine TEST environemnt. Can anyone recommend us a way of setting the Status of QRFC queues to STOP.
Thanks.
KiranThanks everyone !!
We executed a simple scenario where we selected the Sender SOAP of the type EOIO which enabled us to define a specific queue e.g. TEST_QUEUE. In the Receiver SOAP we entered incorrect usrr id which caused the messages to be blocked in the queues. Once that was done we again reset the password to the correct values and ran our reports to restart QRFC inbound queues which helped us verify the auto restart of queues.
Best Regards,
Kiran -
Hi All,
I am trying a file to file scenario. In SXMB_MONI the message status is "scheduled" and the queue status is "stopped".
I have tried deregistering and registering the queue.
i also tired to see the error in by double clicking on the queue ID it shows SYSFAIL. when i double click on SYSFAIL it shows a message "XI ERROR Update XI Cache Queue Stopped". for this i have also refreshed the cache. but nothing seems to help.
Anyone having a clue?
Thanx in advance.
Latika.Hi Latika,
Reason,
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
1. Try restarting J2EE stack.
2. One of the reason may be database overflow. In this case also, restart is required.
3. Check if XIAPPLUSER & XIAFUSER are locked. Also retype the password and try.
Check out Steve Winkler's response here
To Be Delivered on Adapter Message for JDBC
Regards,
Prateek -
Why is my HP Deskjet 970C Print Queue Status "Stopped" and won't change?
I recently installed 10.5 Leopard. Hooked up my old HP-970C Deskjet. Used the link: http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic to get the new HP Driver as recommended. Set up printer with this driver.
Each time the print command is given (Word Doc or .pdf file) nothing happens. The job is shown in the Print Queue with the Status says "Stopped." Clicking the resume button does not start the printer. Twice more and I get a message that says "Operation Could not be completed. client-error-not-possible."
Any thoughts on how to work around this?
Tried the six steps listed at: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01462601&lc=en&dlc=en&cc=us &lang=en&softwareitem=bi-54970-4&os=219&rule=5837&product=3435684
Even those great steps did not help. Any other ideas? Thanks!!!The short answer is that you have an older HP printer, and have just been bitten by HP's abandonment of older printers on both Leopard and Vista.
The foomatic drivers should work, though; I used foomatic drivers on my old HP MFD for years. They gave better output than the ones HP shipped, and actually worked in Leopard. I put the HP onto a machine running XP because scanning didn't work anymore on either Vista or Leopard and HP had no intention of fixing it.
When I see the error you quoted, there are usually three possible causes:
1 the printer itself has a hardware problem. The fix for that is to buy a new printer, it's not economic to repair a DJ970.
2 the HP drivers are present on the system and are interfering. The fix for that is to remove the HP drivers and just have the foomatic drivers installed.
3 the USB cable is bad or loose. The fix for that is to get a new USB cable and make sure that it is securely plugged in. -
BW Queue Status Stopped: SXMB_MONI
Hi
I am passing data from XI to BW into a Data Source via Inbound Proxy. The problem is for some of my messages I get the status as Green Flag(Queue Status- Stop)in SXMB_MONI.
That means all those Messages are not posted to Data source even though they are successfully transferred from XI.
If I manually try to restart them. It says that the message are already scheduled in Queue. But in Queue there is no entry.
Should I regenerate my proxy? Even though out of 10 I still have 6 successful Messages and rest 4 as Queue status stopped.
Can anyone suggest what can be the problem?
Regards
SwetankHi,
is there any trasaction in BW where you can register your Queues. somthing like sxmb_Adm--> register Queues...
B'cos this was the same problem that i encountered when i was using another client(105) in XI-IS when executing server proxies. Then the queues in the client system were not registered.
so check if there is any place in BW system where you can register the queues.
cheers,
Siva maranani. -
Queue Status is showing Stopped
Folks,
I am trying to pass IDOCS from XI and the Queue Status is showing Stopped . I am using two receivers.
Please let me know how to start the queue.
ManishStill the queue is showing stooped , here is the trace ,
<i><b> <Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- <!-- ************************************
-->
<Trace level="1" type="T">User: XIAPPL</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">Correct Version from 2 to 3: 3.X-Data to 4.x-Data</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="1" type="T">Syntax-Check-Flag</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPST4</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" /></b></i>
Can anybody let me know what is the problem -
Message Status as "Scheduled" and Queue Status "Queue Stopped".
Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena JohnHi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod. -
Message Status "Scheduled", Queue Status "Queue Stopped"
Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena JohnHi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod. -
SAP dispatcher status is stopped in Console how can i start it
Hi All
Help me out
*SAP dispatcher status is stopped in Console how can i start it
Dispatcher turns green to yellow suddenly and status changes to stopped and all WP elemets shows status as ended.
Alert from Syslog : SAP Basis System: Message server disconnected
Tracert : Disp+work.exe
trc file: "dev_disp", trc level: 1, release: "640"
Thu Oct 02 12:32:52 2008
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 21
intno 20020600
make: multithreaded, ASCII
pid 736
***LOG Q00=> DpSapEnvInit, DPStart (00 736) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 21 successfully loaded
shared lib "dw_xtc.dll" version 21 successfully loaded
shared lib "dw_stl.dll" version 21 successfully loaded
shared lib "dw_gui.dll" version 21 successfully loaded
Thu Oct 02 12:32:58 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 6624 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 05270040, size: 2505416)
DpShMCreate: allocated sys_adm at 05270040
DpShMCreate: allocated wp_adm at 052717A8
DpShMCreate: allocated tm_adm_list at 05273188
DpShMCreate: allocated tm_adm at 052731B0
DpShMCreate: allocated wp_ca_adm at 054910F8
DpShMCreate: allocated appc_ca_adm at 05495748
DpShMCreate: allocated comm_adm_list at 05496EB8
DpShMCreate: allocated comm_adm at 05496ED0
DpShMCreate: allocated vmc_adm_list at 054C5CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 054C5CF8
DpShMCreate: allocated wall_adm at 054C5D00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2450 MB
<ES> 2449 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( home) [dpxxdisp.c 9719]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 21
Release check o.K.
Thu Oct 02 12:33:38 2008
ERROR => W0 (pid 1500) died [dpxxdisp.c 12170]
ERROR => W1 (pid 3796) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3548) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 1464) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3368) died [dpxxdisp.c 12170]
ERROR => W5 (pid 3400) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2620) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 380) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-1500 (SIGUSR2)
ERROR => DpWpKill(1500, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3796 (SIGUSR2)
ERROR => DpWpKill(3796, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3548 (SIGUSR2)
ERROR => DpWpKill(3548, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1464 (SIGUSR2)
ERROR => DpWpKill(1464, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3368 (SIGUSR2)
ERROR => DpWpKill(3368, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3400 (SIGUSR2)
ERROR => DpWpKill(3400, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2620 (SIGUSR2)
ERROR => DpWpKill(2620, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-380 (SIGUSR2)
ERROR => DpWpKill(380, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:48 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Thu Oct 02 07:03:48 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1500 Ended no 1 0 0
1 DIA 3796 Ended no 1 0 0
2 UPD 3548 Ended no 1 0 0
3 ENQ 1464 Ended no 1 0 0
4 BTC 3368 Ended no 1 0 0
5 BTC 3400 Ended no 1 0 0
6 SPO 2620 Ended no 1 0 0
7 UP2 380 Ended no 1 0 0
Dispatcher Queue Statistics Thu Oct 02 07:03:48 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
8
8
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Thu Oct 02 07:03:48 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Oct 02 07:03:48 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:53 2008
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (676) (SOFT_KILL)
Stop icman
killing process (924) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:676 HANDLE:1564)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:54 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:676 HANDLE:1564)
[DpProcDied] Process died (PID:924 HANDLE:1556)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'home'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1572
MsIDetach: detach MS-system
EsCleanup ....
Thu Oct 02 12:33:55 2008
***LOG Q05=> DpHalt, DPStop ( 736) [dpxxdisp.c 8478]
Good Bye .....
Trace from WP table DIA 1
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Oct 02 12:32:59 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.19)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 21
M intno 20020600
M make: multithreaded, ASCII
M pid 1500
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1500) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 6624 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05A70040, size: 2505416)
M DpShMCreate: allocated sys_adm at 05A70040
M DpShMCreate: allocated wp_adm at 05A717A8
M DpShMCreate: allocated tm_adm_list at 05A73188
M DpShMCreate: allocated tm_adm at 05A731B0
M DpShMCreate: allocated wp_ca_adm at 05C910F8
M DpShMCreate: allocated appc_ca_adm at 05C95748
M DpShMCreate: allocated comm_adm_list at 05C96EB8
M DpShMCreate: allocated comm_adm at 05C96ED0
M DpShMCreate: allocated vmc_adm_list at 05CC5CD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05CC5CF8
M DpShMCreate: allocated wall_adm at 05CC5D00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPSUD's password
C Connecting as /@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 9753]
C Try to connect with default password
C Connecting as SAPSUD/<pwd>@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 9753]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1195] [dbsh 1195 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1271]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9379]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server home_SUD_00 on host home (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Oct 02 12:32:59 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9555
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 246]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1500) [dpnttool.c 357]
Thanks in advance please help me out
Edited by: sudhakar aleti on Oct 2, 2008 12:54 PM
Edited by: sudhakar aleti on Oct 2, 2008 12:56 PMHi All please find the result r3trans -d
4 ETW000 r3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 03.10.2008 - 11:02:35
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Oct 03 11:02:36 2008 5494 0.005494
4 ETW000 [dev trc ,00000] db_con_init called 40 0.005534
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 26 0.005560
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 33 0.005593
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 139566 0.145159
4 ETW000 [dev trc ,00000] using "C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll"
4 ETW000 22 0.145181
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 7 0.145188
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 13 0.145201
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "640.00", patchlevel (0.19)
4 ETW000 2501 0.147702
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 12 0.147714
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 18 0.147732
4 ETW000 [dev trc ,00000] New connection 0 created 13 0.147745
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 15 0.147760
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 12391 0.160151
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 12 0.160163
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 14 0.160177
4 ETW000 [dev trc ,00000] Found ORACLE_HOME=C:\oracle\ora92 in Registry 796 0.160973
4 ETW000 [dev trc ,00000] -->oci_initialize 400 0.161373
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8MSWIN1252
4 ETW000 34020 0.195393
4 ETW000 [dbsloci. ,00000] *** ERROR => Cannot connect: TNS-name missing 11 0.195404
2EETW169 no connect possible: "DBMS = ORACLE --- TWO_TASK = ''"
Thanks
Sudhakar A -
SMQ2 - Found a queue with name "*" and all other queues stuck in STOP state
Hi all,
We have a problem on the ECC side, on outbound asynchronous proxies. Sometimes a new queue appears on SMQ2 there with name "", and with status "STOP". At this time, all other queues stuck with STOP status... the only way of resetting all those queues to RUNNING state again is to delete the queue named as ""...
Some of you has any idea how this queue "*" appears there and stop all other queues?
thanks
robertiHi Ravi,
Is not only about one queue stopped... the problem is this queue named ""... with status STOP, all other queues stops too with it. The only way to make things work again is to delete the queue named as ""... the problem is to discover what or who is creating this stupid "*" queue. I think that this is a procedural error on datacenter, but they are saying is not the case... I'm investigating, but if someone else has any idea about I would appreciate
thanks!
roberti -
Queue status no send or waitupda in SMQ1
Hi,all:
Now our BW system can not do delta upload usually.I find some queue status nosend or waitupda in SMQ1 in source system(CRM). How to make them work usually? Can you give me some advices?
Regaards&Thanks!
zagoryhi Zagory,
which datasource are you using ? 0crm_sales* ?
have you activate it in BWA5 ?
take a look oss note 692195-FAQ: Sales Analytics and CRM-BW data Extraction
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
hope this helps.
Symptom
There may be problems or issues related to data tranfer from CRM to BW.
Other terms
CRM-BW extraction,upload,initial,delta,full upload ,Sales Analytics,
Reason and Prerequisites
There could be errors in customization or program errors due to which
data may not be transferred or incorrectly transferred to BW.
Solution
Question 1 : The Extraction from CRM to BW takes a very long time. What
can be done? (Performance Issues)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available).
How can I extract data in this case?
Question 3 : The Deltas for my data source are not extracted . What can
I do?
Question 4: How can I extract the fields, which are not provided in the
standard data source extraction ?
Question 5: I am unable to extract user status correctly.What should I
do?
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted?
Question 7: What can I do if the deleted opportunities
are not reflected in BW?
Question 8: How do I activate the metadata?
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0
and various other BW status mean ?
Solutions
Question 1 : The Extraction from CRM to BW takes a very long time. What can be done? (Performance Issues)
Suggestion 1: Please implement notes 653645 (Collective note) and
639072(Parallel Processing).
The performance could be slow because of the wrong control parameters
used for packaging.
You can change the package size for the data extraction.
Also note that changing the package size in the transaction SBIW
would imply a change for all the extractors. Instead, you could
follow the path in the bw system.
Infopackage (scheduler) > Menu 'Scheduler' > 'DataS. default data
transfer' > maintain the value as 1500 or 1000(This value is variable)
The package size depends on the Resources available at the customer side
(The no of parallel processes that could be assigned =
1.5 times the no of CPU's available approx.)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available)
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate
the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and
activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
Go to transaction RSA1 > modeling > infosources > select the
infosource > right mouse click on the selected
infosource > choose option replicate datasource
Activate the infosource.
6. Go to the scheduler for the infosource > select delta in the
update >choose the option PSA only (in the Processing tab)
> start immediately
Check the entry in the RSA7 in the OLTP(CRM system)
Question 4: How can I extract the fields, which are not provided in the standard data source extraction .
Suggestion 4: Follow the steps mentioned below.
1. Enhance Extract Structure with the required fields. (Create & include
an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double
click on the Datasource and remove the flags in the column 'Hide
Field' for all fields of Append. )
2.b)If the new fields cannot be seen in the extract structure of
the transaction BWA1 then change and save the datasource, and then
activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO .
Follow the path ->
SAP Implementation guide ->Implementation with other mySAP components ->
Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM)->
Settings for BW adapter->
Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Question 5: I am unable to extract user status correctly.What should I
do?
Suggestion 5 :Check the following notes
531875
616062
713458
700714
765281
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted.
Suggestion 6 :Check the following notes
481686
516820
603609
617411
711146
Question 7:Deleted opportunities are not reflected in BW.
Suggestion 7: Check the note 706327.
Question 8: How do you activate the metadata?
Suggestion 8:CRM BW adapter meta data has to be activated first before
it is available in the system. You can use Transaction BWA5 to copy the
meta data for selected DataSources. You can reach the transaction via
the IMG maintenance 'SAP Reference IMG -> Settings for SAP Business
Information Warehouse -> Activate BW Adapter Meta Data'. For more
information, see the documentation on the IMG activity 'Activate BW
Adapter Meta Data'. (Note 432485)
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Suggestion 9: In case of attribute datasources, it is possible that the
entry for the GUID is missing in the table SMOXAFLD.
If , for example the datasource 0CRM_OPPT_ATTR is not giving deltas
then you can follow the steps:
1)If Delta process is active for the attribute datasource e.g.
0CRM_OPPT_ATTR, then stop the delta process in the BW
system
2) In the CRM system, Make the entry in the table SMOXAFLD
for the datasource with the Key
as 0CRM_OPPT_ATTR GUID 3) Save the entry.Activate the datasource 4) Check that the above entry is replicated in smoxafld_s also after this. 5) Create a transport request manually for the following object R3TR SMO4 0CRM_OPPT_ATTR
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
Suggestion 10: The BW status are used to extract system and user defined
status.
The BW status are defined in the customization settings in SPRO.
Check for-> Status Concept for BP/Product/CRM objects
Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Goto the record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly. -
Messages stucked in moni with queue status as "RUNNING"
Hi All,
Few of messages stucked in moni with queue status as "RUNNING" from the past 6 to 7 hours. all the stucked messages running on same dialog instance app server 03 (ucobpi03_PIP_03). i checked PIP appserver its working fine.
Can any one please expalin me how to clean the queues..is there any effect of other queues ?
Thanks,
Siva.Hi,
it can be due to multiple reasons....
check the interface logic built ...it can be either due to this or can be of large volume of data...
Also check the queues have been registered or not...
HTH
Rajesh -
** Message being processed - Queue status green colour
Hi Friends,
Many messages in our SXMB_MONI shows green color in the queue id column. It shows 'Message being processed'. All messages are in queue, still they are not delivered. Processing takes more hours. These messages are not EOIO queue. While we check this thru SMQ1 and SMQ2 it shows 'Running'. So, what could be the problem ...?
Kindly help friends, to solve this issue. (Points rewarded for helpful answer)
Kind Regards,
Jeg P.HI,
QUEUE STATUS RUNNING BASICALLY MEANS THT
The first LUW of this queue is currently being processed. If a queue in this status hangs for more than 30 minutes, this may mean that the work process responsible for processing this LUW has been terminated. In this case you can activate this queue again. Note that activating a queue in status RUNNING may cause a LUW to be executed several times if this LUW is still being processed in the target system at that time. We therefore recommend a waiting time of at least 30 minutes before you reactivate the queue.
HOPE THIS WILL SOLVE THE PROBLEM
PLZ REWARDS POINTS
VIKAS -
Dear all,
While doing CCR i am getting the error with queue status as "SYSFAIL" in inbound queues of APO, When displyed the same saying " Enter Purchase Group" When displayed data from LUW in binary code shows material as semifinished material is it right?
I am unable to find out the material for which it shows this error, This error apperaed first time.
Please help me out How can i trace this error.
Regards,
AmolHi,
What says the application log (SLG1)
You can look there by the "TID of First LUW" entry and search by "External ID" field in SLG1.
Usually from there you can get order number, material number, plant and some other useful data. Does it bring more light?
btw. "Enter Purch. Group" error usually is seen in the inbound queue, when the purchasing group of the material master is not maintained. See SNP2 tab of the material master - it should be filled.
br,
Mikhail -
Server Admin doesn't show Print Queue status
When I look at my print queues (all 17) under Server Admin, it shows queue name, # of jobs, shared via (IPP & SMB), and printer kind (HP LJ 1022n and HP LJ P2015). It has a column for status, but this is always 100% empty/blank. Also, if I go to the Jobs tab, then I can pick "Jobs on Queue" for all the queues, but the line below for "Queue Status" is again always blank.
Is there something I can do to get this info to show up in Server Admin? I know that CUPS knows the printer status, as I can go to localhost:631 and see the status in the Printers list and the Jobs list.
It isn't life threatening. It is just annoying to have to go to the web page when Server Admin -almost- gets me everything I need to diagnose a teacher's printing problem remotely.Hi Keith
You could always consult the Print Service logs. If you set the logging levels to Debug or Debug2 you should get everything. You have to be a bit careful with this as the log can get quite large. Other than that I don’t know of anything that is available out of the box.
There may be others that can suggest a 3rd party solution that gives you the appropriate feedback you are looking for. Opening port 631 should not be that much of risk I would have thought?
Tony
Maybe you are looking for
-
Templates from Pages disappeared?
I created a newsletter last October using a template from Pages and it was awesome. Now I'm trying to create another one and there are only 4 templates for newsletter. What happened to the rest that I saw in October? Did I lose them after upgrading t
-
MCOD system - Isolation of components
Dear all, I am having a query in isolating the components in MCOD database. Let me clearly explain the scenario. Existing Landscape : Sql 2000 , ECC 5 , BW 3.5 and XI 3.0 -- 32 bit New landscape : Sql 2005 , ECC 5, Bw 3.5 and XI3.0 -- 64 bit
-
99 Pictures or 99 slideshows??
I am using IDVD '08. I am creating a DVD yearbook for our school. So, and for the last week, I have created a DVD that contains about 6000 pictures,it has about 72 slide shows in different categories and contains about 15 to 20 menus for the slide sh
-
Display dims in and out periodically
I was wondering if this is normal. The display screen will dim from light to dark, and then back to light again. I just recently purchased this MBP refurbished from apple last week. It's the early 2008 2.4 previous generation model. Thank you
-
Hello, I would have a sound card in a Sun E450 server. I want to use the server for audio streaming and need a soundcard as a capture device. So, has somebody any idea what is the (most inexpensive) way how to connect a sound device with tis Sun. The