Queue status stopped

Hi All,
I am trying a file to file scenario. In SXMB_MONI the message status is "scheduled" and the queue status is "stopped".
I have tried deregistering and registering the queue.
i also tired to see the error in by double clicking on the queue ID it shows SYSFAIL. when i double click on SYSFAIL it shows a message "XI ERROR Update XI Cache Queue Stopped". for this i have also refreshed the cache. but nothing seems to help.
Anyone having a clue?
Thanx in advance.
Latika.

Hi Latika,
Reason,
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
1. Try restarting J2EE stack.
2. One of the reason may be database overflow. In this case also, restart is required.
3. Check if XIAPPLUSER & XIAFUSER are locked. Also retype the password and try.
Check out Steve Winkler's response here
To Be Delivered on Adapter Message for JDBC
Regards,
Prateek

Similar Messages

  • BW Queue Status Stopped:  SXMB_MONI

    Hi
    I am passing data from XI to BW into a Data Source via Inbound Proxy. The problem is for some of my messages I get the status as Green Flag(Queue Status- Stop)in SXMB_MONI.
    That means all those Messages are not posted to Data source even though they are successfully transferred from XI.
    If I manually try to restart them. It says that the message are already scheduled in Queue. But in Queue there is no entry.
    Should I regenerate my proxy? Even though out of 10 I still have 6 successful Messages and rest 4 as Queue status stopped.
    Can anyone suggest what can be the problem? 
    Regards
    Swetank

    Hi,
    is there any trasaction in BW where you can register your Queues. somthing like sxmb_Adm--> register Queues...
    B'cos this was the same problem that i encountered when i was using another client(105) in XI-IS when executing server proxies. Then the queues in the client system were not registered.
    so check if there is any place in BW system where you can register the queues.
    cheers,
    Siva maranani.

  • Why is my HP Deskjet 970C  Print Queue Status  "Stopped" and won't change?

    I recently installed 10.5 Leopard. Hooked up my old HP-970C Deskjet. Used the link: http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic to get the new HP Driver as recommended. Set up printer with this driver.
    Each time the print command is given (Word Doc or .pdf file) nothing happens. The job is shown in the Print Queue with the Status says "Stopped." Clicking the resume button does not start the printer. Twice more and I get a message that says "Operation Could not be completed. client-error-not-possible."
    Any thoughts on how to work around this?
    Tried the six steps listed at: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01462601&lc=en&dlc=en&cc=us &lang=en&softwareitem=bi-54970-4&os=219&rule=5837&product=3435684
    Even those great steps did not help. Any other ideas? Thanks!!!

    The short answer is that you have an older HP printer, and have just been bitten by HP's abandonment of older printers on both Leopard and Vista.
    The foomatic drivers should work, though; I used foomatic drivers on my old HP MFD for years. They gave better output than the ones HP shipped, and actually worked in Leopard. I put the HP onto a machine running XP because scanning didn't work anymore on either Vista or Leopard and HP had no intention of fixing it.
    When I see the error you quoted, there are usually three possible causes:
    1 the printer itself has a hardware problem. The fix for that is to buy a new printer, it's not economic to repair a DJ970.
    2 the HP drivers are present on the system and are interfering. The fix for that is to remove the HP drivers and just have the foomatic drivers installed.
    3 the USB cable is bad or loose. The fix for that is to get a new USB cable and make sure that it is securely plugged in.

  • R&R Queue Demon is hanging in status STOPPING

    Hi folks,
    I'm currently facing a problem I don't seem to cope with so I hope you may be able to help me. Here we go:
    I implemented the SAP CRM Groupware Integration into a CRM 5.0 SP6 system. At first it worked quite well.
    But today I encountered a problem with the R&R Queue Demon (tranaction SMOHQUEUE):
    I wanted to stop and restart the demon by hitting the corresponding buttons "stop queue demon" and then "start queue demon". But I did not get that far.
    Once I pressed "stop queue demon" and then the "refresh" button, the queue demon seems to be stuck in status STOPPING. And I don't seem to find a way to get the demon into status HOLD in order to be able to start it once again. It does not react to my input (i.e. pressing the two buttons I mentioned above).
    So when I press "stop queue demon", it says "stopping queue demon successful. press refresh", but when I press "refresh", it's still in status STOPPING.
    And when I press "start queue demon", it says "starting queue demon not necessary. already started." which is unfortunately not reflected in the status of the queue demon.
    So what can I do to get the demon into status RUNNING again? Is there a way to reset the demon without having to restart the entire server?
    Thank you in advance for you help!
    best regards
    Alex

    Hi all,
    I was able to solve this problem by deleting a lock entry (transaction SM12) in client 000 which seemed to have blocked the queue demon as described above. After deleting this entry the queue demon switched back to status HOLD and could be restarted immediately. Now it's running again.
    But usually you should not delete any lock entries without knowing exactly what it's all about.
    I hope this is helpful for others facing the same problem.
    regards
    Alex

  • Queue Status is showing Stopped

    Folks,
    I am trying to pass IDOCS from XI and the Queue Status is showing Stopped . I am using two receivers.
    Please let me know how to start the queue.
    Manish

    Still the queue is showing stooped , here is the trace ,
    <i><b>  <Trace level="1" type="B" name="IDX_INBOUND_XMB" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">User: XIAPPL</Trace>
      <Trace level="1" type="T">Language: E</Trace>
      <Trace level="1" type="T">Correct Version from 2 to 3: 3.X-Data to 4.x-Data</Trace>
      <Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
      <Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
      <Trace level="1" type="T">Syntax-Check-Flag</Trace>
      <Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
      <Trace level="1" type="T">Queueid</Trace>
    - <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
      <Trace level="1" type="T">Get the Metadata for port SAPST4</Trace>
      <Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
      </Trace>
      <Trace level="1" type="T">Set Receiver Routing-object</Trace>
      <Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
      <Trace level="1" type="T">COMMIT is expected by application !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" /></b></i>
    Can anybody let me know what is the problem

  • Queue status is stopped

    Hi,
    I have a File to Proxy  assync. scenario. The file has been read, and then the message stops in the queue. I checked it on sxmb_moni,  the message is posted on a queue and the queue status is "stopped" (with a red stop button printed on).
    I have already read all the posts about this  and couldn't find any solution... Can anyone help?
    Thanks.
    Shwetha

    Yes connection is set proper now.
    And the scenario involves EOIO
    Since it is EOIO, i would suggest that you see the status of the messages in RWB (it may be in Holding)....if it is Holding then follow the lead given in this blog: /people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
    Regards,
    Abhishek.

  • Message Status as "Scheduled" and Queue Status "Queue Stopped".

    Hi friends,
    My scenario is from Peoplesoft -> XI -> BI
    Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
    How to proceed further ? How can I start that queue ?
    Thanks ain advance,
    Neena John

    Hi Neena,
    Go to SXMB_ADM -> Manage Queues -> Register Queues
    More on queues
    XI :  How to Re-Process failed XI Messages Automatically
    Run the report RSXMB_REGISTER_QUEUES and register the queues
    Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
    Refer this:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
    Regards,
    Vinod.

  • Message Status "Scheduled", Queue Status "Queue Stopped"

    Hi friends,
    My scenario is from Peoplesoft -> XI -> BI
    Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
    How to proceed further ? How can I start that queue ?
    Thanks ain advance,
    Neena John

    Hi Neena,
    Go to SXMB_ADM -> Manage Queues -> Register Queues
    More on queues
    XI :  How to Re-Process failed XI Messages Automatically
    Run the report RSXMB_REGISTER_QUEUES and register the queues
    Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
    Refer this:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
    Regards,
    Vinod.

  • Setting QRFC Queue Status to STOP

    Hello
    We will be scheduling reports in Prod to auto restart stopped outbound and inbound QRFC queues. But before implementing these changes we need to know if these reports are working fine TEST environemnt. Can anyone recommend us a way of setting the Status of QRFC queues to STOP.
    Thanks.
    Kiran

    Thanks everyone !!
    We executed a simple scenario where we selected the Sender SOAP of the type EOIO which enabled us to define a specific queue e.g. TEST_QUEUE. In the Receiver SOAP we entered incorrect usrr id which caused the messages to be blocked in the queues. Once that was done we again reset the password to the correct values and ran our reports to restart QRFC inbound queues which helped us verify the auto restart of queues.
    Best Regards,
    Kiran

  • Queue Status

    Hi ,
    I have a file to file scenario which works fine but the moment I execute file to JDBC scenario the queue got stopped. Now file is scenario is also not working due to stopped queue. Interestingly, when I checked the details of succesully processed message then queue is XBTO___001 and for all stopped queue scenario queue is XBTI002, 3 or 4. All the Queue are registered. I am not able to undestand what is happening technically. also, how do I start the stopped queue? Inbound Queue monitor is showing SYSFAIL as the status. if I click on SYSFAIL then on another page its showing XI restart in qRFC is not allowed.
    Thanks
    Sanjeev Sinha

    Hi Ahmad,
    Thanks for the response but my problem is still not solvedI am able to see all the XBTI* queue and unlock XBTI003 after that I processed the file again and it went into SYSFAIL state. Do I need to restart the server? Also , what is reason behind queue getting stopped? Is it due to running any faulty scenario?
    Is it right that only one XBTI* queue will be active at any point of time bcos if I try to release the lock of any other XBTI queue then XBTI0003 goes into SYSFAIL state. Is there any document for understanding the queue usage in SAP XI context?
    Thanks
    Sanjeev Sinha

  • How do I know if my queue is stopped?

    Hi all,
    11.2.0.1
    Our end-users is complaining that she has queue and dequeue error.
    I run this command:
    EXEC DBMS_AQADM.START_QUEUE(queue_name => 'MERCHANT_NOTIFY_Q');
    EXEC DBMS_AQADM.START_QUEUE(queue_name => 'AQ$_MERCHANT_NOTIFY_QT_E', enqueue => false);
    and the error was resolved.
    How do I know when to run the command? or what status does the queue has stopped?
    Thanks all,
    pK

    A little bit of searching resulted in
    ALL_QUEUES
    Note the enqueue_enabled and dequeue_enabled columns.
    CURSED be the DBA who outsources ALL of his work to a forum of volunteers, and has been abusing it this way for MONTHS.
    Sybrand Bakker
    Senior Oracle DBA

  • Q status -stop

    hi,
    I created file to idoc scenario. but in sxmb_moni its showing green flag and Q.status is STOP. what is means....
    regards
    manoj

    Hi,
    Try to de register and register your queue from SXMB_ADM .
    Also, try deleting the entry in the queue by double clicking on the Queue ID in SXMB_MONI and restarting your message.
    Also see the below threads....
    Q.Status is "Queue stopped"
    SXMB_MONI - Message Status - Automatic Restart
    Queue Stopped
    Q.Status  Stopped
    Regards
    Chilla..

  • Queue status no send or waitupda in SMQ1

    Hi,all:
      Now our BW system can not do delta upload usually.I find some queue status nosend or waitupda in SMQ1 in source system(CRM). How to make them work usually? Can you give me some advices?
    Regaards&Thanks!
    zagory

    hi Zagory,
    which datasource are you using ? 0crm_sales* ?
    have you activate it in BWA5 ?
    take a look oss note 692195-FAQ: Sales Analytics and CRM-BW data Extraction
    Question 3 : The Deltas for my data source are not extracted . What can I do?
    Suggestion 3: Please check the following.
    Please Check if the services have been generated in transaction GNRWB.
    If they are not active(not marked 'X' before their names) then activate the services following the steps here.
    Go to transaction GNRWB
    Select BUS_TRANS_MSG
    Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
    Press Generate.
    Also check  for the following:
    1. The delta should have been initialized successfully.
    2. Confirm that all Bdocs of type BUS_TRANS_MSG
       are processed with success in SMW01.
    3. If there are queues in SMQ1 with erroneous status then activate these queues.
       In Transaction SMQ1 if there are Queues existing with
       names beginning with CRM_BWAn (n is number) then
       activate these queues in the same transaction.
    hope this helps.
    Symptom
    There may be problems or issues related to data tranfer from CRM to BW.
    Other terms
    CRM-BW extraction,upload,initial,delta,full upload ,Sales Analytics,
    Reason and Prerequisites
    There could be errors in customization or program errors due to which
    data may not be transferred or incorrectly transferred to BW.
    Solution
    Question 1 : The Extraction from CRM to BW takes a very long time. What
    can be done? (Performance Issues)
    Question 2 : On executing transaction RSA3 I get records but I find 0
    records when I load data from BW request.(No Data Available).
    How can I extract data in this case?
    Question 3 : The Deltas for my data source are not extracted . What can
    I do?
    Question 4: How can I extract the fields, which are not provided in the
    standard  data source extraction ?
    Question 5: I am unable to extract  user status correctly.What should I
    do?
    Question 6 : What can I  do when the activity/Opportunity/Complaint
    reasons(Code,CodeGruppe,Katalogart)  are not extracted?
    Question 7: What can I do if the deleted opportunities
    are not reflected in BW?
    Question 8: How do I activate the metadata?
    Question 9: I donot get any records for the delta upload of my attribute
    datasource(s).What is to be done?
    Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0
    and various other BW status mean ?
    Solutions
    Question 1 : The Extraction from CRM to BW takes a very long time. What can be done? (Performance Issues)
    Suggestion 1: Please implement notes  653645 (Collective note) and
    639072(Parallel  Processing).
    The performance could be slow because of the wrong control parameters
    used for packaging.
    You can change the package size for the data extraction.
    Also note that changing the package size in the transaction SBIW
    would imply a change for all the extractors. Instead, you could
    follow the path in the bw system.
    Infopackage (scheduler)    > Menu 'Scheduler'   > 'DataS. default data
    transfer'   > maintain the value as 1500 or 1000(This value is variable)
    The package size depends on the Resources available at the customer side
    (The no of parallel processes that could be assigned =
    1.5 times the no of CPU's available approx.)
    Question 2 : On executing transaction RSA3 I get records but I find 0
    records when I load data from BW request.(No Data Available)
    Suggestion 2: First check if there are any entries in the table
    CRMD_ORDER_INDEX.Only if there are entries in this table you can
    extract records.
    If this is not the case then,
    It is possible that the user does not have sufficient
    authorities for extraction of  the relevant objects.
    Additionally, please review and implement the following notes
    615670
    161570
    150315
    618953
    If you are in the release 4.0 then
    To do BW extraction with the user please see that the following
    authorization object exists(display mode is enough):
    CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
    CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
    CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
    (all these objects are linked to transaction crmd_order).
    Question 3 : The Deltas for my data source are not extracted . What can I do?
    Suggestion 3: Please check the following.
    Please Check if the services have been generated in transaction GNRWB.
    If they are not active(not marked 'X' before their names) then activate
    the services following the steps here.
    Go to transaction GNRWB
    Select BUS_TRANS_MSG
    Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
    Press Generate.
    Also check  for the following:
    1. The delta should have been initialized successfully.
    2. Confirm that all Bdocs of type BUS_TRANS_MSG
       are processed with success in SMW01.
    3. If there are queues in SMQ1 with erroneous status then activate
       these queues.
       In Transaction SMQ1 if there are Queues existing with
       names beginning with CRM_BWAn (n is number) then
       activate these queues in the same transaction.
    4.a)If required activate the datasource
        Go to transaction BWA5   > select the required datasource and
        activate.
    4 b) The Delta may not be active ,activate the delta in BWA7 by
      selecting the name of the datsource and pressing the candle icon for
      'activate delta'.
    5. In BW system
       Go to transaction RSA1   > modeling   > infosources   > select the
       infosource   > right mouse click on the selected
       infosource   > choose option replicate datasource
        Activate the infosource.
    6. Go to the scheduler for the infosource   > select delta  in the
        update  >choose the option PSA only (in the Processing tab)
        > start immediately
    Check the entry in the RSA7 in the OLTP(CRM system)
    Question 4: How can I extract the fields, which are not provided in the standard  data source extraction .
    Suggestion 4: Follow the steps mentioned below.
    1. Enhance Extract Structure with the required fields. (Create & include
       an append structure to the extract structure via transaction RSA6).
    2.a) Release the fields of the append  for usage. (  To do this, double
       click on the Datasource and remove the flags in the column 'Hide
       Field' for all fields of Append. )
    2.b)If the new fields cannot be seen in the extract structure of
        the transaction BWA1 then change and save the datasource, and then
        activate it in RSA6.
    3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
    Goto SPRO .
    Follow the path ->
    SAP Implementation guide ->Implementation with other mySAP components ->
    Data transfer to the Business Information Warehouse->
    Settings for the application specific datasources (CRM)->
    Settings for BW adapter->
    Badi :BW adapter :Enhancement of datasources in messaging flow.
    4. Replicate the new Datasource to BW.
    5. Expand the Communication Structure in BW.
    6. Maintain transfer Rules for the new Datasource.
    7. Activate the trasfer rules and perform the upload.
    Question 5:  I am unable to extract  user status correctly.What should I
    do?
    Suggestion 5 :Check the following notes
    531875
    616062
    713458
    700714
    765281
    Question 6 : What can I  do when the activity/Opportunity/Complaint
    reasons(Code,CodeGruppe,Katalogart)  are not extracted.
    Suggestion 6 :Check the following notes
    481686
    516820
    603609
    617411
    711146
    Question 7:Deleted opportunities are not reflected in BW.
    Suggestion 7: Check the note 706327.
    Question 8: How do you  activate the metadata?
    Suggestion 8:CRM BW adapter meta data has to be activated first before
    it is available in the system. You can use Transaction BWA5 to copy the
    meta data for selected DataSources. You can reach the transaction via
    the IMG maintenance 'SAP Reference IMG -> Settings for SAP Business
    Information Warehouse -> Activate BW Adapter Meta Data'. For more
    information, see the documentation on the IMG activity 'Activate BW
    Adapter Meta Data'.  (Note 432485)
    Question 9: I donot get any records for the delta upload of my attribute
    datasource(s).What is to be done?
    Suggestion 9: In case of attribute datasources, it is possible that the
    entry for the GUID is missing in the table SMOXAFLD.
    If , for example the datasource 0CRM_OPPT_ATTR is not giving deltas
    then you can follow the steps:
    1)If Delta process is active for the attribute datasource e.g.
         0CRM_OPPT_ATTR,  then stop the delta process in the BW
         system 
    2) In the CRM system, Make the entry in the table SMOXAFLD
       for the datasource with the Key
       as  0CRM_OPPT_ATTR     GUID 3) Save the entry.Activate the datasource                           4) Check that the above entry is replicated in smoxafld_s also    after this.               5) Create a transport request manually for the following    object             R3TR   SMO4   0CRM_OPPT_ATTR    
    Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
    Suggestion 10: The BW status are used to extract system and user defined
    status.
    The BW status are defined in the customization settings in SPRO.
    Check for-> Status Concept for BP/Product/CRM objects
    Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
    Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Goto the record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly.

  • Messages stucked in moni with queue status as "RUNNING"

    Hi All,
      Few of messages stucked in moni with queue status as "RUNNING" from the past 6 to 7 hours. all the stucked messages running on same dialog instance app server 03 (ucobpi03_PIP_03). i checked PIP appserver its working fine.
    Can any one please expalin me how to clean the queues..is there any effect of other queues ?
    Thanks,
    Siva.

    Hi,
    it can be due to multiple reasons....
    check the interface logic built ...it can be either due to this or can be of large volume of data...
    Also check the queues have been registered or not...
    HTH
    Rajesh

  • ** Message being processed - Queue status green colour

    Hi Friends,
    Many messages in our SXMB_MONI  shows green color in the queue id column. It shows 'Message being processed'. All messages are in queue, still they are not delivered. Processing takes more hours. These messages are not EOIO queue. While we check this thru SMQ1 and SMQ2 it shows 'Running'. So, what could be the problem ...?
    Kindly help friends, to solve this issue. (Points rewarded for helpful answer)
    Kind Regards,
    Jeg P.

    HI,
    QUEUE STATUS RUNNING BASICALLY MEANS THT
    The first LUW of this queue is currently being processed. If a queue in this status hangs for more than 30 minutes, this may mean that the work process responsible for processing this LUW has been terminated. In this case you can activate this queue again. Note that activating a queue in status RUNNING may cause a LUW to be executed several times if this LUW is still being processed in the target system at that time. We therefore recommend a waiting time of at least 30 minutes before you reactivate the queue.
    HOPE THIS WILL SOLVE THE PROBLEM
    PLZ REWARDS POINTS
    VIKAS

Maybe you are looking for

  • Master table, detail table, detail table not getting refreshed selection

    i have a page where i am displaying data as master table and detail table. both table VOs are based on SQL queries which use bind variables. i have a view link between vos of type 1:M i created master table detail table page by dropping detail iterat

  • Itunes 9.2 not downloading

    I updated my iphone 3gs to the new software which worked successfully. I then tried to download the new itune 9.2 but it doesnt work and it comes up with the error message 'could not access network location %APPDATA%\.' or 'The installation of QuickT

  • Opening balnce

    Hii All             i am in a roll out project i want to know how upload all opening balnce with new g/l account. i knw normally we done through with the help of BDC  &  LSMW. i need to knw  how to frame this thing with lsmw.. Regards   Ajeesh.s

  • AD Connector 11.1.1.5.0

    Hi All, I am using following product... IDM 11g (11.1.1.5.2), Backend Database Oracle 11gR2, Weblogic 1.3.5. ActiveDirectory 11.1.1.5.0, .Net ConnectorServer in the DC / AD 2008. I am getting the fowling error : "[2012-06-07T21:25:05.534+03:00] [oim_

  • How to Verify whether CAPolicy.inf Configuration was picked correctly or not ?

    Hi ALL, can you please suggest me a way to verify whether CAPolicy.inf Configuration was picked correctly or not during CA installation and if it was not picked up correctly where can I see the error messages what exactly went wrong ?.