Queue stopped error

I am getting a "SYSFAIL" error which says "Queue stopped", I am just wondering should I be able to fix it? if so, how? or I have to ask Basis people to help to fix it?
Thanks you very much for your response.

Go through this blog. They had a similar problem.
http://scn.sap.com/thread/1761380 Regards Veeru

Similar Messages

XI Error JCO_SYSTEM_FAILURE.MAPPING: Queue stopped

In SMQ2, i can see a queue stuck giving error:
XI Error JCO_SYSTEM_FAILURE.MAPPING: Queue stopped
when i click it...it leads me to a SXMB_MONI entry..
which corresponds to a IDOC to File scenario, where a message mapping fails giving the following error,
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>java.lang.OutOfMemoryError</SAP:P1>
<SAP:Stack>"SYSTEM FAILURE" during JCo call. java.lang.OutOfMemoryError</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
If i try to reEXECUTE the LUW from SMQ2, it again shows the error.......
how can i solve the problem without delecting the queue

hi ,
This error is coming because your message is very large or lots of large xsd files are uploaded in XI
you need to increase the memory used by JVM for your XI. How to increase the Memory ? for answer go to this blog.
/people/keerti.nayak/blog/2007/03/05/solving-145out-of-memory146-problem-150-using-jnlp
hope it will sovle the problem...

Inbound queue error"XI Error APPLICATION_ERROR.ABAP: Queue stopped"

Hi,
In SMQ2 ,we have received inbound queue error "XI Error APPLICATION_ERROR.ABAP: Queue stopped".When activate queue error is not going.So please advice.
Thanks,
Praveen

Hello Mr,
Have a look into SAP Notes: 824554, 906435, 783515, 910649, 706563.
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
To be more helpful, can you post here complete error log?

XI Error : EXCEPTION_DURING_EXECUTE.Mapping Queue stopped

Hi All,
We are facing an issue when the mapping fails due to a use one as many function it fails the queue and Queue goes into state SYSFAIL. We see the error as XI Error : EXCEPTION_DURING_EXECUTE.Mapping Queue stopped
Is this expected ? Isnt the queue expected to work normally by just failing the message which would then appear in sxmb_moni?
Any help , pointers?
Regards,
Sathya

Hi Jyothi,
Sorry for not being clear.. I know what is causing the mapping error. its incorrect number of values in use one as many function as i Mentioned earlier.
I want to know is there a way to stop the queue from failing. Queue failure causes other messages which are coming from other interfaces to get blocked.
Ideally the messages in error should show up in sxmb_moni and queues should be processing normally. However in this case it does not happend.
Regards,
Sathya

XI Error ERROR_OBJECT.INTERNAL: Queue stopped

Hi All,
In our Integration system there are lot of ques stopped in SMQ2. When we checked the status is SYSFAIL and we are getting message as "XI Error ERROR_OBJECT.INTERNAL: Queue stopped"
Not sure how to solve this problem and what are the things that i should check.
"XI Error ERROR_OBJECT.INTERNAL: Queue stopped
Message no. SR053
In SM37 i can check that the job named "80144F3A76E71DDFAF9B420D2A9B8456" is created by user PISUPER and running and active since 86000 secs.
Can anyone help in this
Thanks

hi,
need to restart Queue..
->double click on Quue
->it will show you status of the Q....number of messages in the Q...
-> double-click on the number of entries
-> you will see a detailed report
-> double click on the first entry
-> you will see the message processing due to which the Q got blocked
-> on the toolbar above (in the same page) you will find the option of Restart...click it....select the tracing level as retain....
this will cause the message processing to restart and all the messages blocked in the Q will get processed....
please refer below blog:
Internal Server Error in PI 7.1
thanks,

Queue Stopped

Hi all,
We are facing an unusual problem.
We transported one IDoc to file scenario to another XI System .
The scenario contains one BPM.
Now the problem is that the IDoc is coming from R/3 Business System but not going to BPM. We couldn't find any errors in receiver determination.
In the "Monitor for processed XML messages" we can see
a. Flag is green.
b. Idoc is coming from R/3 to XI
c. Receiver / Receiver Service columns are blank.
<b>d. Q.Status : Queue stopped .</b>
e. Error Category / Error ID columns are blank.
When we place mouse over Q.Status it is showing that message contains errors. But we couldn't find the error as the same thing is working well in XI-Dev.
Can anyone help.
Thamks in Advance.
Chemmanz
Message was edited by: Chemmanz

Hi,
We created one File-BPM-File scenario.
Here also the File Adapter is picking the file but the message is not going to BPM.
In monitoring (SXMB_MONI) we cannot see only one step >Message is coming from File BS to XI, after that no receiver, no error - Only one thing Q. Status stopped.
Regards
Chemmanz.

Queue stopped in sxmb_moni

Hi,
I am getting the problem in sxmb_moni when the XML message goes from one integration process to SOAP adapter and a mapping is called.The queue status is Queue Stopped. When i click on that queue it shows status as SYSFAIL.When i double click on that queue again it shows Status Text
as "XI Error CLIENT_SEND_FAIL . INTERNAL :Queue Stoppe ".
And the trace for that message is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>35</SAP:P1>
<SAP:P2>HTTPIO_ERROR_CUSTOM_MYSAPSSO-Fehlermeldung beim Senden der Daten.</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 35, error text: HTTPIO_ERROR_CUSTOM_MYSAPSSO-Fehlermeldung beim Senden der Daten.)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please help me with this issue...

Queue Stopped
For your message processing in sxmb_moni...in the Qstatus column you will be seeing a red circle with stop written in it...
->double click it
->it will show you status of the Q....number of messages in the Q...
-> double-click on the number of entries
-> you will see a detailed report
-> double click on the first entry
-> you will see the message processing due to which the Q got blocked
-> on the toolbar above (in the same page) you will find the option of Restart...click it....select the tracing level as retain....
this will cause the message processing to restart and all the messages blocked in the Q will get processed....
Regards,
Abhishek.

Print Queue stops jobs - help?

*One day I could print pdfs and the next I couldn't!*
I'm using Acrobat 7.0 Professional and everytime I try to print a pdf, from any programme, the Print Queue begins to print my file, it says opening Distiller and then the Print Queue stops, just like that! No reasons.
I have reinstalled Acrobat having first uninstalled it from the disc, this hasn't solved my problem.
I have repaired permissions, no solution here.
I have run Printer Setup Repair by Fixamac and that's not helped.
I have reset the printing system in Printer setup utility - still no help.
I have reinstalled the OS system from the original discs and still I cannot get the printer queue to print the job!
I have a Canon Pro 9000 printer and I can print perfectly well to that.
PLEASE can someone help me???
I've wasted half a day on this and have got nowhere.

The log shows that the first process to have trouble is the backend (transport) process "pdf700", which is the PDF distiller installed by Adobe Acrobat 7. I believe the rest of the errors are related to this process failing.
You mentioned that you deleted Acrobat, however I believe that this file may not have been deleted, or overwritten with the new installation. So I would run the the Acrobat Uninstaller and then check if this file gets left behind. If it does, then you can try manually removing this file.
You can see that the file is located in /usr/libexec/cups/backend. You can use the Finder to navigate to the folder. With a Finder window open, select Go > Go to Folder and then type that path above. This will open the backend folder where you will see the pdf700 file. Now, before you can delete it, you will need to change ownership from system to your account. Do a Get Info on the file (Cmd I) and in the new window, expand 'Ownership and Permissions'. You will see you have read-only rights. If you expand Details, then you will see that System is the owner. Next to this is a lock. If you click this you will be prompted for the administrators account/password. After entering this, you can change the owner to your account and then close the Get Info window. Now you will be able to delete the pdf700 file.
With the file removed, you can install Acrobat 7.x again. Of course, if the uninstaller does remove this file, then everything I mentioned above won't be required and of no help. I then recommend you check the Acrobat forums on Adobe's web site to see if there is any fixes mentioned there...

Q.Status is "Queue stopped"

I am using ECC 6.0 and XI 7.0,
While testing messages in XI, in SXMB_MONI, I am getting "Q.Status" as Queue stopped for lot of messages. What could be the possible reason for this??
Thanks in advance

Hi,
In the SMB_MONI, goto the Column showing the queue name and drill down. If the queue is stopped due to errored out message you will be able to see the details.
you can take corrective actions accordingly.
1. If the queue is not registered then register it again.
2. try to reporcess the errored message
3. see if it's not critical to delete the message so that the rest of the message can get processed.
Regards
Vijaya

Message splitting-- Queue stopped when no message created for one interface

Hi all,
I think you saw one post regarding this issue in SDN, but I can't find the post any more.
So, I have message splitting (it's multiple mappings to map one outbound msg to multip inbound msgs, not one mapping to map 1 to n. This is because of our own reason, but should not affect the analysis of the issue) to split one message to multiple. It works fine if the outbound message contains data for every inbound interface. However if the outbound message does NOT contain data for any one inbound message, there is an error in MONI and all subsequently splitted messages will not be passed in IE. The error in MONI says Split mapping created no messages, and Queue status turns to be Queue Stopped, and thus all the subsequently splitted messages are stuck in the queue.
Why this? and how to solve this problem?
Thanks
Jayson

>
Jayson wrote:
> Hi all,
>
> I think you saw one post regarding this issue in SDN, but I can't find the post any more.
>
> So, I have message splitting (it's multiple mappings to map one outbound msg to multip inbound msgs, not one mapping to map 1 to n. This is because of our own reason, but should not affect the analysis of the issue) to split one message to multiple. It works fine if the outbound message contains data for every inbound interface. However if the outbound message does NOT contain data for any one inbound message, there is an error in MONI and all subsequently splitted messages will not be passed in IE. The error in MONI says Split mapping created no messages, and Queue status turns to be Queue Stopped, and thus all the subsequently splitted messages are stuck in the queue.
>
> Why this? and how to solve this problem?
>
> Thanks
> Jayson
Hi Jyson,
what i analyse from this is you may be using different maapings and different inbound interfaces
but your receiver is the same and hence you are using only one interface determination with all the interface mappings specified there...
if this is the case..i suggest you remove the "maintain order at runtime "
tick in that interface detemination and it will surely work
giving points is another way to say thanks
Edited by: Tarang Shah on Mar 20, 2009 7:18 PM

Sysfail queue: queue stopped

i have some scenarios runnnig in my system, some scenarios are failing due to queue STOP,
when i click the queue name from the MONI, it shows that three queues namely XBTI007, XBTI003, XBTI004 are in SYSFAIL status,
when i cllick those queues, i find some 1000 entries in each of the queue,
the topmost entry shows that qRFC SXMS_ASYNC_EXEC failed due to
reason: COMMIT/ROLLBACK error on "DEFAULT" database connection...
there are many scenarios getiing stuck but i could find that the a particular scenarios qRFC execution lead to the error,
but since all the scenarios are getting stuck ....
wat action can i take....
if i select the entry with sysfail status and activate the queue, will it hamper something...
will data loss happen??
pls help...its in production system

Dhar,
SMQ2 is for outbound queue and SMQ1 is inbound queue. If you are getting the messages into XI then check in SMQ1 for any errors in XI and if you are sending out from XI then see SMQ2. Check this help for some more information on this:
http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
Regards,
---Satish

Queue Stopped, messages not getting processed

Hello Experts,
From the pst three days, my XI server is running slowly. All the messages are having the status green. When we check the queues, all the messages are stuck there and the error displayed is SYSFAIL (Queue stopped). If I try to execute the LUW manually it doesn't allow me giving the message "The queus is registered and therefore cannot be activated".
I have also tried deleting the entry and restarting the message again and then it goes to the same queue and gets stuck again. What should I do further?
Thanks,
Merrilly

Hi,
To be able to initiate processing of messages stuck in the queue, make sure to set following IS configuration parameter
MONITOR QRFC_RESTART_ALLOWED to value 1 in SXMB_ADM
Check this
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Regards
Seshagiri
Edited by: N V Seshagiri on Mar 19, 2008 9:07 AM

Queues Stopped when Dispatcher Fails

Hi ,
We had an issue with our Web dispatcher and most of the messages failed in the step "Receiver Grouping" with the error "HTTP_CLIENT_RECEIVE_FAILED" when calling the mapping runtime.
After sometime we also noticed the queues failing with the error "CLient receive failed:Queues stopped".
I am just wondering what the role of the web dispatcher could be in calling the mapping runtime.Can somebody please explain this to me ?
When a message is already being processed on an instance on the Int. Engine, the IE will call the JAVA stack on the same instance(if I am not wrong) then how can the error occur if the Web dispatcher is down.Moreover, in our visual admin properties we have checked the JCA Adapter settings and it is calling its "LOCALHOST" always.
Please explain me in detail the mapping runtime step.
Thanks,
Harish

hi,
I'm not a basis consultant... but I know you can use a web dispatcher, for instance when in production you have several PI application servers. by this way, the IE can communicate with the AE by using just one address (your web dispatcher).
So if this last one shut down, your connexion IE -> AE works no more, and your messages are in error in PI queues (SMQ2.)
regards.
Mickael

Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

I am so upset. Please read my messages from my postings. This has nothing to do with SIM Card, Hard Reset, Apps, Google Gmail Account, nothing. I have gone thru all of this and NOTHING has fixed this. I went to the store today and spoke to the manager on duty. He said he had to try and duplicate the problem before he could help me. I showed him "screen captures" I did, told him it's out here on the board, etc. etc. Needless to say I ended up coming home with the same phone, "he" erased the phone and started over again. Well guess what, it's not a error with "MY" Gmail account being corrupted because if that is the case Mrs. Hayden14 has a bad Gmail account too. If you guessed it, the phone just crashed again! I was able this time to capture a report with ALL the history in it and saved screen captures to PROVE to him this is not a joke. Even the report says "Crash". This time it was something else I don't even or ever have used. I have also wasted over a day , yes a full work day on this without question.
I have had to get the run around for the last day. This is totally ridiculous, including them putting me on hold for 55 min. Oh, that's another funny story. Anyways, tomorrow morning I am going to the Verizon store one last and final time and I hope they decided to do the right thing and give me a phone that does not crash and works. It would be handy at work for me, especially where I work at. I hope hope hope someone listens to and helps me. I would love for them to see me walk in, take my phone and say to me were going to get you another phone, hand it to me, see if it works and prove it's the device. I don't hear anyone having this issue on other phone types so sounds like its the phone type.
I have had 3 phones now in the matter of 2 weeks. I am sure the FedEx charges will add up to a cost of a new phone at some point and start to outbalance your requirement to give me the same phone when it has the same problem.
Can't wait to see what happens tomorrow.

MSI K9A Platinum and VIA drivers issue? XP 0x0000007B stop error.

I get a Windows Stop error when trying to boot into Windows XP with new components. The SATA hard drive (and Windows XP installation) is from the old computer.
The new computer components are:
MB: MSI K9A Platinum, chipset: RD580 (North Bridge), SB600 (South Bridge)
CPU: AMD Athlon 64 x2 5600+, boxed (the cooler and fan came with the CPU).
Video: MSI Radeon 1950 XTX
The old (and working) computer setup is:
OS: XP Professional
MB: Abit AV8-3rd Eye, chipset: VIA K8T800Pro + VT8237
CPU: AMD Athlon 64 3500+
Video: Sapphire Radeon 9800Pro All-in-Wonder, videodriver: atidvag.dll version 6.14.10.6542
HD: Maxtor 6B200M0 SCSI Disk Device
BIOS: Phoenix 6.00PG 20.04.2005
System drivers with "via" in the name: VIAAGP1.SYS, viaide.sys, viasride.sys
VIA 4in1 (Hyperion) version: 4.55 (that can be found at HKEY_Local_Machine\Software\Via4in1Driver).
VIA 2.20e SATA/RAID driver was used when installing this computer setup.
The precise stop error is:
0x0000007B (0xba4c3528, 0xc0000034, 0x00000000, 0x00000000)
From many sites I have gathered that the error is related to Windows XP not being able to access a critical system drive. Most probably the SATA hard drive issue.
The problem probably is the VIA drivers of the old motherboard and/or the SATA driver.
First I should mention, that MSI K9A Platinum does not have a hard disk SATA driver. If it does, I have been unable to find one. Certainly no such floppy disk included, and no such driver in the MSI's Web page for this motherboard.
Second important point: I never used RAID. I did use VIA 2.20e SATA/RAID driver disk when installing Windows XP to the old computer.
Strange that the hard drive model is reported as a "SCSI Disk Device". It's not a SCSI drive however: it's a SATA disk.
I have tried to uninstal the motherboard chipset drivers (Hyperion v4.55), but there seems to be a bug here: the drivers should be uninstalled using the installation program, and select the uninstall option. However, I do not get the uninstallation option to choose at all! Yes, I'm using the normal installation mode, not the quick installation (although tried that, too). The Hyperion setup program just installs, and asks to reboot the computer. After rebooting and trying again, it still does not offer me an uninstallation choise.
I know how to install hard drive VIA SATA driver, but I have no idea how to uninstall it. And I'm afraid to do that without certainty that it IS the solution, since I could not access the hard drive any more in the old computer setup (and return to read this forum). Also, I do not have a floppy drive any more. Anyone know if there is an issue with K9A and XP having VIA SATA driver installed?
When I tried the new computer setup, I first tried the simplest possible hardware combination: there were no CD/DVD-drives, no (parallel)IDE hard drives, and no PCI cards, except the MSI video adapter.
My BIOS Setup experiments. None of these helped: got the same stop error each time.
1) I didn't much touch the BIOS setting first. Just tried to boot with the settings BIOS came with.
2) Next I disabled the integrated audio, LAN and IEE1394 devices and floppy drive and disabled all other choises except the SATA drive as a boot device.
3) Next I tried with the fail-safe BIOS defaults.
4) Cleared CMOS.
5) Changed OnChip SATA type from Native IDE to Legacy IDE. (Only one boot attempt with the setting as Legacy.)
6) Disabled PCI IDE BusMaster.
7) Never touched anything in the Cell Menu: so the settings are in minimum.
A step I have taken after the last attempt: run Windows XP hard drive error-checking tool to every logical drive with the fix option selected, and the system drive also with scan the bad sectors option selected.
My plans next are:
1) to install a newer Hyperion driver. If that would correct the no-unistallation-choice-bug,
2) to disable USB-devices in the BIOS (desperate),
3) to choose the Windows general video display driver (although I seriously doubt this is a display driver problem!).
4) to uninstall the Anti-Virus software (Avira Antivir).
I've read a numerous Web pages so far about the 0x0000007B stop error. Here are some links:
Quote
http://www.seagate.com/www/en-us/support/knowledge_base/
Stop 0x0000007B or INACCESSIBLE_BOOT_DEVICE
This Stop message, also known as Stop 0x7B, indicates that Windows XP Professional lost access to the system volume or boot volume during the startup process. This error always occurs while the system is starting and is often caused by one of the following:
* Hardware problems
* Corrupted or incompatible storage drivers
* File system problems
* Boot sector viruses
* Outdated firmware
During I/O system initialization, this error can occur when:
* The controller or driver for the startup device (typically the hard disk) failed to initialize the necessary hardware.
* File system initialization failed because the system did not recognize the data on the boot device.
Quote
http://support.microsoft.com/kb/314082
You receive a Stop 0x0000007B error after you move the Windows XP system disk to another computer
SYMPTOMS
After you move the Microsoft Windows XP system (boot) disk to a backup computer, you may receive the following Stop error when you try to start the Windows XP-based backup computer:
STOP: 0x0000007B (0xF741B84C,0xC0000034,0x00000000,0x00000000)
CAUSE
This error may occur if the registry entries and the drivers for the mass storage controller hardware in the backup computer are not installed in Windows XP.
RESOLUTION
To resolve this error, use the same hardware for the backup computer.
Heh, heh! Very nice Microsoft, but I plan to update my computer, so I NEED to use different components
Quote
http://support.microsoft.com/kb/324103
Device Driver Issues
You may receive a "Stop 0x0000007B" error message in the following scenarios:
•   A device driver that the computer boot controller needs is not configured to start during the startup process.
•   A device driver that the computer boot controller needs is corrupted.
•   Information in the Windows XP registry (information related to how the device drivers load during startup) is corrupted.
Hardware Issues
You may receive a "Stop 0x0000007B" error message if there is a resource conflict between the boot controller and another controller or between SCSI devices. You may also receive this Stop error message if drive translation is not being performed or if drive translation was changed. To troubleshoot this issue:
1.   If an IRQ or I/O port address conflict exists between the boot controller and another controller, Windows XP either stops responding (hangs) or displays a "Stop 0x0000007B" error message. If you recently added new hardware, remove the new hardware or reconfigure it so that it does not conflict with the resources of any other installed controllers.
2.   If you are using a SCSI hard disk, check the SCSI chain for correct termination. Remove any unused SCSI devices or make sure that each SCSI ID is unique.
3.   Make sure that drive translation is turned on (if it is required) and that it has not been changed. For example, if you recently switched controllers, this issue may occur. For additional information about this issue, click the following article number to view the article in the Microsoft Knowledge Base: 314082.
Quote
http://support.microsoft.com/kb/316401/
SYMPTOMS
When you start your Microsoft Windows XP-based computer after you replace the motherboard on the computer, you may receive a Stop error message that is similar to the following:
STOP 0x0000007B INACCESSABLE_BOOT_DEVICE
CAUSE
This issue may occur if the new motherboard contains an embedded IDE controller that has a different chipset than the original motherboard.
RESOLUTION
Method 1: Perform an in-place upgrade of Windows XP [<- That means repair installation of Windows XP]
•   Do not use a repair or in-place upgrade if you suspect disk problems.
Method 2: Repartition and format your hard disk and reinstall Windows XP

Alright I got the situation over.
Quote from: Roskaposti on 19-May-07, 04:44:59
My plans next are:
1) to install a newer Hyperion driver. If that would correct the no-unistallation-choice-bug,
2) to disable USB-devices in the BIOS (desperate),
3) to choose the Windows general video display driver (although I seriously doubt this is a display driver problem!).
4) to uninstall the Anti-Virus software (Avira Antivir).
I did try all all the above, and none of them helped.
And by the way: after installing the new Hyperion (VIA chipset drivers), I was finally able to also uninstall. It also uninstalled the IDE SATA (I think) and PATA drivers.
But what I had to do, was to make a REPAIR installation of Windows XP.
So, I was wondering now afterwards: this is really, really silly. Why the hell we need to re-install Windows if we move the SYSTEM SATA drive to another computer? We don't have similar problem with parallel IDE drives. Whom should we thank here??
The issue is to insert the driver files and the information of the ide drivers Windows should use with the next boot. How can it be this difficult?
What you basically need is..
- the information about the new chipset's PCIIDE.SYS/[VENDOR_PROVIDED_FILE].SYS and ATAPIIDE.SYS inserted into the values in HKEY_LOCAL_MACHINE\SYSTEM\ControlSetXXX\Control\CriticalDeviceDatabase
- and the vendor's IDE drivers to the %SYSTEMROOT%/System32/drivers folder.
Maybe something else, I don't know. But the problem was, Windows didn't know how, or what drivers to use. That can't be so big problem you need to install the whole OS anew!

Queue stopped error

Similar Messages

Maybe you are looking for