Queue View keeps crashing - Exchange 2010 sp3

Queue View keeps crashing
Description:
Stopped working
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: mmc.exe
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: 4a5bc808
Problem Signature 04: MMCEx
Problem Signature 05: 3.0.0.0
Problem Signature 06: 4a5bda23
Problem Signature 07: 203
Problem Signature 08: 2c
Problem Signature 09: PSZQOADHX1U5ZAHBHOHGHLDGIY4QIXHX
OS Version: 6.1.7601.2.1.0.272.7
Locale ID: 1033

Hi,
Please make sure all services run as well.
Please uninstall KB2686831 if you have installed it. I found an similar thread for your reference:
MMC Crashes when to launch Hyper-V, and other MMC add-ons after applying .NET Patches
http://social.technet.microsoft.com/Forums/windowsserver/en-US/170a9d15-d9f1-4aff-a74d-365f993669c2/mmc-crashes-when-to-launch-hyperv-and-other-mmc-addons-after-applying-net-patches?forum=winservermanager
Also please run Test-ServiceHealth and Test-SystemHealth cmdlet to check whether there is anything abnormal on Exchange 2010 server. If yes, please paste the detailed error without sensitive information for the further troubleshooting.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Similar Messages

After Exchange 2010 SP3 upgrade, UAG publised OWA is throwing a "You do not have permissions to view this folder or page" error

Hi,
We have an issue with our OWA page. We are currently publishing OWA via UAG.
We recently upgraded to Exchange 2010 SP3 and then SP3 Rollup7. Since the upgrade, we are keep getting the following error after entering our credentials on the login page. I've tried with every possible browser.
You do not have permissions to view this folder or page
Strangely enough, the mobile phones are sending and receiving emails just fine, the phones use the same OWA link, so it's not an authentication issue, the phones login into the UAG servers with no issues. I can see this on the Active Sessions screen
on Web Monitor.
I've attempted to connect to the OWA by bypassing the UAG server, so putting in the local OWA address of one of my Exchange servers, it works... so the OWA page is up and running.
No error logs get generated on Web Monitor when we receive the permission error, I think this is because it's past authentication, it's on the Exchange layer.
Any insight would be helpful? I'm assuming something changed on the Exchange side after the upgrade.
Just in case, I've upgraded the UAG and TMG servers to the latest SP and Rollup packets.
UAG > SP4
TMG > SP2 Rollup 5

I've found a solution; UAG requires Basic Authentication over OWA. For some reason Integrated Windows Authentication got turned on after the SP3 upgrade.
http://technet.microsoft.com/en-us/library/ee921443.aspx
Turning Integrated Windows Authentication off via the Client Access OWA settings resolved the issue. Though beware, you
have do this on all your Client Access servers.

Outlook 2013 Category view not updating after Exchange 2010 SP3 RU3

After updating to Exchange 2010 SP3 RU3 last night, users who use categories view in Outlook 2013 are complaining that the view does not update. The alert is received in the notification area and the unread message count next to Inbox updates appropriately.
The view can be force updated by switching between All and Unread, by using Reset View, or closing and opening Outlook. It seems anything that forces a 'redraw' of the view will update it - except for the actual reception of email. I easily replicated
this issue. For reference:
Exchange 2010 SP3 RU3
Windows 7 x64 Ent
Outlook 2013 (15.0.4551.1004) 32-bit
I do see that SP3 RU4 has been released, however the only change listed is a security patch.
Thank you for any ideas.

Hi, Everyone –
This has been a known issue for a very long time – we have people at our workplace that are very disappointed since a feature as great as categorizing email (not using tasks) has become broken and has not even been considered to be fixed for
over half a year. It was not fixed in the updates for Patch Tuesday this week.
I would like to confirm that this is an issue with Outlook 2010 and 2013 when running the latest Exchange 2010 and there is NO FIX
– I have scoured the internet for a solution – all proposed "textbook" solutions do not work and I am positive that the issue can be recreated; however, everyone from Microsoft does not mention trying to recreate the issue at all.
The workaround of creating a rule to send new emails to a category could break other pre-existing rules and cause more frustration and wasted time for users/IT before and after the issue is fixed.
Please fix this issue sooner than later, as the Categories view is completely broken and unusable at this point in time.
Regards,
IT Helper

Exchange 2010 SP3 upgrade - Event ID 4999 - Address Book Crash

0
I just upgraded an Exchange 2010 SP1 CAS server to SP3 - since then anytime an outlook client connects to the CAS server, the Address Book service crash's and event 4999 is logged in App log. I can reproduce the issue by attempting to create a new
outlook profile and checking the name against the CAS server. This crash's the service and the client recieves an error message. The contents of event ID 4999 is below. I've tried re-installing the CAS role, re-applying the schema extension
for SP3. I've installed all windows updates, enabled logging but I'm not getting anywhere. If anyone can help with this issue, I would greatly appreicate it.
Watson report about to be sent for process id: 10168, with parameters: E12, c-RTL-AMD64, 14.03.0123.004, M.E.AddressBook.Service, M.Exchange.Rpc, M.E.R.R.RfriRpcOperationBase.Complete, System.ArgumentException, a3e, 14.03.0123.002.
ErrorReportingEnabled: True
That error is followed by a message that the Address Book service has sucessfully started

Hello,
For exchange 2010 sp3, there is no article to explain the issue.
I suggest you run EXBPA aganist your exchange server health check.
Cara Chen
TechNet Community Support

Exchange 2010 SP3 installation Problem

Im getting below error when upgrading with Exchange 2010 Sp3. Please assist.
Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
Below the complete error from Exchange Setup Logs
[02/16/2014 04:55:04.0515] [0] Setup will run the task 'uninstall-msipackage'
[02/16/2014 04:55:04.0515] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU''
[02/16/2014 04:55:04.0515] [1] Active Directory session settings for 'Uninstall-MsiPackage' are: View Entire Forest: 'True', Configuration Domain Controller: 'domain.local', Preferred Global Catalog: 'Domain.local', Preferred Domain Controllers: '{ domain.local
[02/16/2014 04:55:04.0515] [1] Beginning processing uninstall-msipackage -LogFile:'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode:'4934d1ea-be46-48b1-8847-f1af20e892c1' -PropertyValues:'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU'
[02/16/2014 04:55:04.0547] [1] Removing MSI package with code '4934d1ea-be46-48b1-8847-f1af20e892c1'.
[02/16/2014 04:55:06.0187] [1] [ERROR] Unexpected Error
[02/16/2014 04:55:06.0187] [1] [ERROR] Couldn't remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1. Fatal error during installation. Error code is 1603.
[02/16/2014 04:55:06.0187] [1] [ERROR] Fatal error during installation
[02/16/2014 04:55:06.0234] [1] Ending processing uninstall-msipackage
[02/16/2014 05:03:04.0333] [0] End of Setup
[02/16/2014 05:03:04.0333] [0] **********************************************

Hi,
As you have found, the error is caused by that .msp installer files correlating to all the Update Rollups are not present in the c:\windows\installer folder.
Based on my research, there is no Microsoft article about the hotfix of KB2492690 (SP1 Update Rollup 3). Because our Exchange Team pulled the download due to issues with integration with Blackberry.
For more information, you can refer to the following article:
http://blogs.technet.com/b/exchange/archive/2011/03/14/exchange-2010-sp1-rollup-3-and-blackberrys-sending-duplicate-messages.aspx
Thus, to get more professional and faster help, I recommend you contact with our following support:
https://support.microsoft.com/common/international.aspx?RDPATH=%2foas%2fdefault.aspx%3fgprid%3d730
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Unable to install rollup4 for Exchange 2010 SP3

Hi,
I'm unable to install KB2905616 on my multi-role Exchange 2010 SP3 server. The setup wizard gets stuck at "the setup wizard is generating native images for .NET assemblies........"
I know that this process will take some time to complete but I have waited 10 hours.
I've tried to reboot the server and restart the setup.
Exchange is functioning perfectly otherwise.
Any help would be greatly appreciated :)
/Søren Emig

Hi,
I recommend you check if the anti-virus has been disabled before you start the upgrade process.
If you didn't ,the update could fail or take an extended amount of time.
Also, disable all other third-party apps/plugins that might be installed (like backup agents).
In addition,the following articles for your reference:
Install the Latest Update Rollup for Exchange 2010
When you install an update rollup package, Exchange tries to connect to the certificate revocation list (CRL) Web site. Exchange examines the CRL list to verify the code signing certificate. (To download and view the CRL list, see
CodeSignPCA.crl.) If Exchange can't connect to the CRL Web site, the following symptoms may occur:
The installation takes a long time to complete.
You receive the following message during the installation: Creating native images for .Net assemblies
When Exchange isn't connected to the Internet, each CRL request must complete before the installation can continue.
To work around this issue and to reduce installation times, turn off the
Check for publisher’s certificate revocation option on the server that is being upgraded. Use the following steps:
Start Internet Explorer.
On the Tools menu, click Internet Options.
Click the Advanced tab, and then locate the Security section.
Clear the Check for publisher’s certificate revocation check box, and then click
OK.
After the update rollup installation is complete, select the Check for publisher’s certificate revocation option.
Generating NGEN images takes longer than expected
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

The Test-OrganizationRelationship function on Exchange 2010 SP3 Rollup4 error

Hi
If I run Test-OrganizationRelationship function on Exchange 2010 SP3 Rollup4 the fallowing error appear:
[PS] C:\WINDOWS\system32>Test-OrganizationRelationship -Identity "emag" -UserIdentity [email protected] -verbose
VERBOSE: [12:24:44.359 GMT] Test-OrganizationRelationship : Active Directory session settings for
'Test-OrganizationRelationship' are: View Entire Forest: 'False', Default Scope: 'hq.flanco.ro', Configuration Domain
Controller: 'CALYPSO.hq.flanco.ro', Preferred Global Catalog: 'CALYPSO.hq.flanco.ro', Preferred Domain Controllers: '{
CALYPSO.hq.flanco.ro }'
VERBOSE: [12:24:44.359 GMT] Test-OrganizationRelationship : Runspace context: Executing user: hq.flanco.ro/FLANCO -
Users/HQ/IT/Marian NICA, Executing user organization: , Current organization: , RBAC-enabled: Enabled.
VERBOSE: [12:24:44.359 GMT] Test-OrganizationRelationship : Beginning processing &
VERBOSE: [12:24:44.359 GMT] Test-OrganizationRelationship : Instantiating handler with index 0 for cmdlet extension
agent "Admin Audit Log Agent".
VERBOSE: [12:24:44.391 GMT] Test-OrganizationRelationship : Current ScopeSet is: { Recipient Read Scope: {{, }},
Recipient Write Scopes: {{, }}, Configuration Read Scope: {{, }}, Configuration Write Scope(s): {{, }, }, Exclusive
Recipient Scope(s): {}, Exclusive Configuration Scope(s): {} }
VERBOSE: [12:24:44.391 GMT] Test-OrganizationRelationship : Searching objects "[email protected]" of type "ADUser"
under the root "$null".
VERBOSE: [12:24:44.406 GMT] Test-OrganizationRelationship : Previous operation run on global catalog server
'CALYPSO.hq.flanco.ro'.
VERBOSE: [12:24:44.406 GMT] Test-OrganizationRelationship : Searching objects "emag" of type "OrganizationRelationship"
under the root "$null".
VERBOSE: [12:24:44.406 GMT] Test-OrganizationRelationship : Previous operation run on domain controller
'CALYPSO.hq.flanco.ro'.
VERBOSE: Test that organization relationships are properly configured.
VERBOSE: [12:24:44.406 GMT] Test-OrganizationRelationship : Resolved current organization: .
VERBOSE: [12:24:44.406 GMT] Test-OrganizationRelationship : Calling the Microsoft Exchange Autodiscover service for the
remote federation information.
VERBOSE: [12:24:44.983 GMT] Test-OrganizationRelationship : The Autodiscover call succeeded for the following URL:
https://autodiscover.emag.ro/autodiscover/autodiscover.svc.
VERBOSE: [12:24:44.983 GMT] Test-OrganizationRelationship : The Autodiscover call succeeded for the following URL:
https://autodiscover.emag.ro/autodiscover/autodiscover.svc.
VERBOSE: [12:24:44.983 GMT] Test-OrganizationRelationship : Generating delegation token for user [email protected]
for application FYDIBOHF25SPDLT.exchangedelegation.emag.ro.
VERBOSE: [12:24:46.138 GMT] Test-OrganizationRelationship : The delegation token was successfully generated.
VERBOSE: [12:24:46.138 GMT] Test-OrganizationRelationship : The Microsoft Exchange Autodiscover service is being called
to determine the remote organization relationship settings.
VERBOSE: [12:24:46.138 GMT] Test-OrganizationRelationship : The Client will call the Microsoft Exchange Autodiscover
service using the following URL: https://autodiscover.emag.ro/autodiscover/autodiscover.svc/WSSecurity.
VERBOSE: [12:24:46.185 GMT] Test-OrganizationRelationship : The Microsoft Exchange Autodiscover service failed to be
called at 'https://autodiscover.emag.ro/autodiscover/autodiscover.svc/WSSecurity' because the following error occurred:
SoapException.Code =
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd:InvalidSecurityToken
Exception:
System.Web.Services.Protocols.SoapHeaderException: An error occurred when processing the security tokens in the
message.
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse
response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.Exchange.SoapWebClient.CustomSoapHttpClientProtocol.<>c__DisplayClass4.<Invoke>b__3()
   at
Microsoft.Exchange.SoapWebClient.HttpAuthenticator.NoHttpAuthenticator.AuthenticateAndExecute[T](SoapHttpClientProtocol
client, AuthenticateAndExecuteHandler`1 handler)
   at Microsoft.Exchange.SoapWebClient.SoapHttpClientAuthenticator.AuthenticateAndExecute[T](SoapHttpClientProtocol
client, AuthenticateAndExecuteHandler`1 handler)
   at
Microsoft.Exchange.SoapWebClient.AutoDiscover.DefaultBinding_Autodiscover.GetOrganizationRelationshipSettings(GetOrgani
zationRelationshipSettingsRequest Request)
   at
Microsoft.Exchange.Management.Sharing.TestOrganizationRelationship.<>c__DisplayClass8.<GetInvokeDelegate>b__7(DefaultBi
nding_Autodiscover binding)
   at
Microsoft.Exchange.SoapWebClient.AutodiscoverClient.<>c__DisplayClassf.<InvokeAndFollowSecureRedirects>b__c(IWebProxy
webProxy)
   at Microsoft.Exchange.SoapWebClient.AutodiscoverClient.InvokeWithWebProxy(String url, InvokeWithWebProxyDelegate
invokeWithWebProxy)
   at Microsoft.Exchange.SoapWebClient.AutodiscoverClient.InvokeAndFollowSecureRedirects(InvokeDelegate invokeDelegate,
Uri url)
   at Microsoft.Exchange.SoapWebClient.AutodiscoverClient.InvokeForUrl(InvokeDelegate invokeDelegate, Uri url)
VERBOSE: [12:24:46.185 GMT] Test-OrganizationRelationship : The Autodiscover call failed.
RunspaceId : b3b378f5-d912-4042-b578-e949b54da4c1
Identity    :
Id          : AutodiscoverServiceCallFailed
Status      : Error
Description : The Autodiscover call failed.
IsValid     : True
VERBOSE: [12:24:46.185 GMT] Test-OrganizationRelationship : Admin Audit Log: Entered Handler:OnComplete.
VERBOSE: [12:24:46.185 GMT] Test-OrganizationRelationship : Ending processing &


It's not this, is it -
http://johanveldhuis.nl/en/error-occurred-processing-security-tokens-message/ ?

Exchange 2013 Sp1 Coexistence with Exchange 2010 SP3 CU5 HTTP 500

I`m trying to make working OWA coexistence between Exchange 2013 SP1 and Exchange 2010 SP3 CU5.
When user login in to OWA where his mailbox is located on Exchange 2013 server it logon successful and owa opened. When i try to login to the same url with user whose mailbox is located on Exchange 2010 server i get Error http 50
The website cannot display the page : HTTP 500 »https://URLEXCHANGE2013/owa/auth.owa«
The same is, when i use https:// URLEXCHANGE2013/ecp?ExchClientVer=14
URL on Exchange 2013 are different as fro Exchange 2010.
I even tried to setup Internal URL for Exchange 2010 to bi set to »null ,Saem error
Exchange server 2013 Sp1 is installed on Windows server 2012 R2.

Assumption is correct. I have even enable verbose logging, and i can see MSExchange Front End HTTP Proxy , that successfully connect to Exchange 2010 server.
But remember Exchange 2013 is fresh installation on Windows server 2012 R2.
IIS LOG
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=391fd8b3-2b98-494a-8812-d38feda2e5a0&cafeReqId=391fd8b3-2b98-494a-8812-d38feda2e5a0;
443 companyNT\SM_9c071c4922fd420fb fe80::99d1:f542:a4d3:b469%12 MSRPC - 200 0 0 5484
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=27cfafa2-8224-4563-918b-0b228c6ee8d4&cafeReqId=27cfafa2-8224-4563-918b-0b228c6ee8d4;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 0
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=6d930bcd-7bbc-415a-a25a-8d6488e91401&cafeReqId=6d930bcd-7bbc-415a-a25a-8d6488e91401;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 15
2014-03-04 08:52:55 10.1.0.36 GET /owa/ &CorrelationID=<empty>;&cafeReqId=551cfdd9-18ac-42d8-aea3-cbb546c9d9fb; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/
302 0 0 9937
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fOWA.company.com%2fowa%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c1b97df9-ec56-4906-b2f5-965551b720ae; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
https://OWA.company.com/ 200 0 0 1015
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f&CorrelationID=<empty>;&cafeReqId=b92ca682-04f4-4d4f-931e-9a95680ab9ea; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
- 200 0 0 671
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=093bd01a-de59-4519-80f6-067484122091; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c2f7565d-ee6a-48f8-8d86-16d5d3ca65c1; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=ba633030-2376-4bad-a32f-8f160bd87bd4; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=5e94172c-d97c-46a9-a602-6030d6f7da2c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fEXCH2013%2fecp%2f&CorrelationID=<empty>;&cafeReqId=9ba2caf3-2a03-44a2-8477-2724689e139c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 46
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/15.0.847/scripts/premium/flogon.js &CorrelationID=<empty>;&cafeReqId=62bb4655-3bfa-4e07-aa62-27c93e7e8b4d; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:59 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=9d52ec1a-2ee1-4954-85e6-89e7e5df407a; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 302 0 0 812
2014-03-04 08:52:59 ::1 GET /OWA/Calendar/[email protected]/calendar/calendar.html &CorrelationID=<empty>;&cafeReqId=4ea66475-9a47-41a4-81cb-6b569715d0d6; 443 - ::1 AMProbe/Local/ClientAccess - 200 0 0 8859
2014-03-04 08:53:01 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=b3db7480-2192-436c-b01d-29d0e528cfec; 443 UseronEX2010 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f
500 0 0 187
2014-03-04 08:53:04 127.0.0.1 GET /Microsoft-Server-ActiveSync/default.eas &CorrelationID=<empty>;&cafeReqId=2e2a655b-00b9-42ae-8789-1e452e6579c3; 443 [email protected] 127.0.0.1 AMProbe/Local/ClientAccess
- 200 0 0 8265
2014-03-04 08:53:14 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=8741886f-b9b1-46f9-8c15-baf35809a12c; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 15265
2014-03-04 08:53:14 127.0.0.1 GET /OWA/auth.owa &CorrelationID=<empty>;&cafeReqId=8ad938fb-f2c3-42bf-8718-da62b122422c; 443 - 127.0.0.1 AMProbe/Local/ClientAccess - 302 0 0 15
HTTPERR LOG :
2014-03-04 08:51:48 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:51:48 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:30 127.0.0.1 14122 127.0.0.1 443 HTTP/1.1 GET /RPC/[email protected] 404 - NotFound -
2014-03-04 08:52:30 ::1%0 14121 ::1%0 443 HTTP/1.1 GET /ecp/ReportingWebService/ 404 - NotFound -
2014-03-04 08:54:42 ::1%0 14117 ::1%0 444 - - - - - Timer_ConnectionIdle -
2014-03-04 08:54:48 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:54:48 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
Trace login, ok it is xml, so print is..
-Request Summary
Site
1
Process
8232
Failure Reason
STATUS_CODE
Trigger Status
500
Final Status
500
Time Taken
500 msec
Url
http://EXCH2013.companyNT.local:80/powershell?clientApplication=ActiveMonitor;PSVersion=4.0&sessionID=Version_15.0_(Build_846.0)=rJqNiZqNgZuQkpqT0pqH0ZuQkpqTkYvRk5CcnpOBzsbLzsbGyczJyIHPzNDPy9DNz87L38/Gxc/KxcrJ
App Pool
MSExchangePowerShellFrontEndAppPool
Authentication
Kerberos
User from token
companyNT\SM_9c071c4922fd420fb
Activity ID
{8000134C-0001-E300-B63F-84710C7967BB}
-Errors & Warnings
No.↓
Severity
Event
Module Name
157. view trace
Warning
-MODULE_SET_RESPONSE_ERROR_STATUS
ModuleName
ManagedPipelineHandler
Notification
EXECUTE_REQUEST_HANDLER
HttpStatus
500
HttpReason
Request Failed
HttpSubStatus
0
ErrorCode
The operation completed successfully.
(0x0)
ConfigExceptionInfo
ManagedPipelineHandler
See all events for the request

Exchange 2010 SP3 DAG Flip Flop File Share Witness Issue

Hi All,
We are facing one strange issue with Exchange 2010 SP3.
Our environment is as below
a single DAG spanned accross 2 AD sites with 6 MBX server.
Each site have 3 MBx server.
File Share Witness is on Hub server in primary site.
Note: The DAG IP is from Primary DC VLAN and which cant be streched accross DC due to network restrictions/limitations.
It was working fine till date.
But, yesterday onwards we are facing issue.
All DB dismounted and DAG name disappear from EMC and while doing refresh its giving error as below
Exception type: Microsoft.Exchange.Data.DataValidationException
Exception message: Could not convert property WitnessServer to type UncFileSharePath. Error while converting string 'vesthub700.mydomain.com\DAG1.mydomain.com' to result type Microsoft.Exchange.Data.UncFileSharePath: "vesthub700.mydomain.com\DAG1.mydomain.com"
is not an acceptable path. You must use an absolute, local, long file path, that doesn't contain '~', or a UNC path. Parameter name: path
We are not able to execute any cmdlets related to databaseavailabilitygroup from EMS and its giving same error.
Failover Cluster DAG resource is Flip/Flip continuously.
Its only become stable after reboot of the hub server holding FSW and the 1st mailbox server.(Cluster Owner)
We are even not able to move cluster group to different server.
Performed ExBPA no such issues found which related to DAG.
Performed clsuter validation.
Only generic cluster events in Mailbox servers.
Observation:
Its only become stabe if we remove the msExchFileShareWitness Value for DAG1 using ADSIEdit.
And the problem recurs if we set it back again.
Any help or suggestion is appreciated.
Thanks,
soumen
Soumen Ghosh

Hi Belinda,
Thanks! I have checked the Mailbox Server Application Log and found few 2155 Event Id generated at the time of the issue occured.
Process Microsoft.Exchange.ServiceHost.exe () (PID=9312). Configuration object CN=DAG1,CN=Database Availability Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=xxxxxx,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=mydomain,DC=com
read from DCTDK35.mydomain.com failed validation. DataValidationException will be thrown. Set event logging level for Validation category to Expert to get additional events about each failure.
One update is that the DAG is stable now after we set an alternate FSW last night.
Regarding the 2nd IP assignment for DAG for the 2nd subnet, we have gone through technet and other sites which refering to add the same from EMC or EMS.
Is it sufficinet to simply adding the 2nd IP to DAG from EMC or EMS? Or do we need to take any other special consideration.
Also, adding another IP it will create one more IP address resource to Failover Cluster, but I belive at a time both the IP wont be online. Do we need to keep it offline manually or its automatically taken care by Exchange.
Please suggest.
Also, regarding executing the CollectOverMetrics.ps1 we are following
http://www.msexchange.org/articles-tutorials/exchange-server-2010/monitoring-operations/monitor-dag-database-failover.html
but failed to execute. Can you suggest the correct parameter.
Thanks,
Soumen
Soumen Ghosh

Exchange 2010 SP3 - RU3 RU4 Public Folders issues ( not refreshing ) when grouping by Categories for "(None)" Group

After installing Exchange 2010 SP3 RU3, I had an issue in Public Folders, once having group by categories in Outlook, the Group of "(None)" categories is not refreshing when changing flag... I also installed RU4 but nothing changed, any reason
Thx

Hi,
From your description, the group with none categories won’t fresh when changing flag in Category view. If I misunderstood, please point it out.
As you can in the View tab as below, there is Category as well as Flag: Start date or Due Date. It means that grouping per color categories is more or less different from that
grouping by flag.
Should you need more assistance, feel free to tell me.
Regards,
Rebecca Tu
TechNet Community Support

Exchange 2010 SP3 Update Rollups

Hi All,
I have a question about installing Update Rollups for Exchange 2010 SP3. After some organizational changes I have to take care of windows updates and our WSUS server. During the last check I found out that there are:
Update Rollup 5,6,7 listed in WSUS for our Exchange which is (CAS, HUB, MB). I've checked also some information about installing Update Rollup but it's not very clear for me. i saw also a problems after installing Update Rollup 6 and also some info from
blogs.technet.com
The release contains fixes for customer reported issues and previously released security bulletins. Update Rollup 7 is
not considered a security release as it contains no new previously unreleased security bulletins. Customers running
any Service Pack 3 Update Rollup for Exchange Server 2010 can move to Update Rollup 7 directly.
So, what is the best way to do it?
- Decline old Update Rollups, Install all other security and critical updates from WSUS, reboot the server, install Update Rollup 7, reboot the server?
Thanks in advance

Hi kondio
Thank you for your question.
Service packs and update rollups are part of the servicing strategy for Exchange 2010. They provide an effective and easy-to-use method to distribute Exchange 2010 fixes and modifications. We recommend that you install the latest service pack and update
rollup to keep the product up-to-date.
I suggest you update manually instead of WSUS.
You can refer to the following link to read about RU:
http://technet.microsoft.com/en-us/library/ff637981(v=exchg.141).aspx
If there are any questions, please let me know.
Best Regard,
Jim

Force email download in HTML or text format on iPhone/iPad with ActiveSync (Exchange 2010 SP3)

Hi,
When an HTML email with attachment is received on iPhone/iPad (iOS 8.2),
it can be downloaded in three cases of
intermittents ways :
- The full message is downloaded in HTML format
- The message is download in text format and a
"Download full message" link is displayed
at the bottom of the message
- The message is displayed in text format,
but continues to download the rest of the message.
When the download is complete, the message is displayed
in HTML format.
This behavior is intermittent. The Apple's support
says it is a particular configuration on Exchange server
that causes this behavior.
I want to know if there is a way to fix
this problem and force download email
either in text or HTML format ?
This problem occurs on iPhones/iPad
(iOS8.2) with ActiveSync account (Exchange 2010
SP3). It occurs also with Outlook.com account.
On the Exchange 2010 SP3 server, The MaxEmailBodyTruncationSize
and MaxEmailHTMLBodyTruncationSize settings are
unlimited in ActiveSync policies.
Thank you for your help.

Hi,
We can configure Exchange ActiveSync Mailbox Policy Properties to force device download HTML or text format email.
Use the EMC to view or configure Exchange ActiveSync Mailbox Policy by the following steps:
In the console tree, navigate to Organization Configuration >
Client Access.
In the result pane, click the Exchange ActiveSync Mailbox Policies tab, and then select the policy you want to view or configure.
In the action pane, click Properties.
Under the Sync Settings tab, check or uncheck the box
Allow HTML-formatted e-mail. Select this check box to enable e-mail messages that are formatted in HTML to be synchronized to the mobile phone. If this check box isn't selected, all e-mail messages will be converted to plain text before synchronization.
And use this command to configure whether allow text messaging on the mobile phone. The Exchange Enterprise Client Access License is required to change the values of this setting.
Set-ActiveSyncMailboxPolicy -Identity PolicyName –AllowTextMessaging $True
For more information, please refer to this document.
https://technet.microsoft.com/en-us/library/bb123484(v=exchg.141).aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Exchange 2010 SP3 (CU

Exchange 2010 SP3 with Update ROllup 8-v2
Event Viewer/APP contains a lot of this errors:
Content Indexing function 'CISearch::EcGetRowsetAndAccessor' received an unusual and unexpected error code from MSSearch.
Mailbox Database: Production Databases
Error Code: 0x80041606
We have tried with runing: C:\Program Files\Microsoft\Exchange Server\V14\Scripts\ResetSearchIndex.ps1 on Exchaneg server and restarting Information Store, but errors still appear.
Any hints how to fix this error?
With best regards
bostjanc

Hi,
Basically there's a problem with the catalog data for the database, we need to recreate it. Please try the following method first to check this issue.
On the Exchange server that's hosting the database that's giving you the error. Start > In the search/run box type services.msc {enter} > Locate the Microsoft Exchange Search Indexer Service and stop it.
Navigate to the folder that holds the problem Database (By default, the path is: C:\Program Files\Microsoft\Exchange Server\V14\Mailbox\Mailbox Database). Within the folder you will find another folder called CatalogData-xxxxxxxxxxxxxxxxxx > Delete this
folder.
Then restart the Microsoft Exchange Search Indexer Service.
The catalog will now rebuild.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Install Exchange 2010 Sp3 on Windows 2012 R2

Dear All,
From Microsoft Exchange support matrix, I can tell that Exchange 2010 Sp3 is not listed on supported page. However when I run the setup, the prerequisite setup check, dose not list any warnings or issues with the setup, all check are green. Is it possible
that the support OS matrix has not been updated? Is Exchange 2010 Sp3 supported on Windows 2012 R2?
http://blogs.technet.com/b/rmilne/archive/2013/09/17/exchange-support-for-windows-server-2012-r2.aspx
Thank you

The prerequisite check is checking that the required Windows components are installed. Exchange 2010 is still not supported on Windows Server 2012 R2.

Sharepoint 2013 vs Exchange 2010 SP3 search (Error while crawling LOB contents)

Hi there:
We are trying to solve the problem: ERROR CRAWLING LOB CONTENTS when we wish to search Exchange 2010 SP3 public folder content on Sharepoint 2013 Foundation.
Quick briefing:
Followed this instructions:
http://technet.microsoft.com/en-us/library/jj591608(v=office.15).aspx
* Created CRAWL RULE
- Used Domain Admin for content access ---> IS THIS WRONG?
- Domain Admin can access public folder thru Outlook Web Access (checked)
- Included all items in this path
PRINTSCREEN 1
* Added a content source for Exchange Server public folders
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 1st subfolder in new window and copied the address
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 2nd subfolder in new window and copied the address
PRINTSCREEN2
* Did a FULL CRAWL
PROBLEM:
- Search results does not throw "correct data". Some items are not being found
CRAWL LOG is reporting: Error while crawling LOB contents
Detailed error message:
https://mail.domain.com/OWA/?ae=Folder&id=PSF.LgAAAAAaRHOQqmYRzZvIAKoAL8RaAwAnt2ed15IATLg8XoXLNj4EAAAAXsN8AAAB&t=IPF.Note
Error while crawling LOB contents.
Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.InvalidOperationException An internal server error occurred.
Try again later.; SearchID = 4E8542D3-48EF-404E-8025-8D9AAEFE777A )
We thought it's a throttling issue / found possible solution:
http://powersearching.wordpress.com/2013/07/23/exchange-public-folders-search-fail-error-while-crawling-lob-contents/
Tried it, still same Error messages, problem not resolved.
Any hints? Please advise.
With best regards
bostjanc

Hi Bostjan,
From the error message, the issue might be caused by throttling policy on Exchange side. And the article you posted provides the right solution, some modification to the solution and please try again.
For throttling policy part
1.Execute the command for Set-ThrottlingPolicy
Set-ThrottlingPolicy SharePoint -RCAMaxConcurrency Unlimited -EWSMaxConcurrency Unlimited -EWSMaxSubscriptions Unlimited -CPAMaxConcurrency Unlimited -EwsCutoffBalance Unlimited -EwsMaxBurst Unlimited -EwsRechargeRate Unlimited
2.Execute the command Get-ThrottlingPolicy SharePoint to double confirm the policy setting has been successfully executed
For registry key part
1. Start Registry Editor (regedit).
2. Navigate to the following registry subkey:
\\HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
3. Right-click ParametersSystem, point to New, and then click Key.
A new key is created in the console tree.
4. Rename the key MaxObjsPerMapiSession, and then press Enter.
5. Right-click MaxObjsPerMapiSession, point to New, and then click DWORD (32-bit) Value.
The new value is created in the result pane.
6. Rename the key to <Object_type>, where <Object_type> is the name of the registry object type that you're modifying. For example, to modify the number of messages that can be opened, use objtMessage. Press Enter.
7. Right-click the newly created key, and then click Modify.
8. In the Value data box, type the number of objects that you want to limit this entry to, and then click OK. For example, type 350 to increase the value for the object.
9. Restart the Microsoft Exchange Information Store service.
If it still doesn’t help, please check ULS log for related error message.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Queue View keeps crashing - Exchange 2010 sp3

Similar Messages

Maybe you are looking for