Quick 10g RAC Installation guide for Solaris

I am looking for quick/step by step guide/article for 10g RAC installation for Solaris

Hi, also you can get more information about the install process into Oracle documentation, please review the next link, there you found extensive information about this process.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/toc.htm
Good luck
Regards,

Similar Messages

  • Oracle Application Server 10g Installation Guide for Windows

    The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
    How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

    Hi,
    The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
    Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
    The Docs are located under the Documentation tab.
    Alternatively, here is the direct link to the Documentation Tab interface of the Library:
    http://download.oracle.com/docs/cd/B10468_04/docs.htm
    Regards,
    Les

  • Looking for best practice / installation guide for grid agent for RAC

    I am looking for best practice / installation guide for grid agent for RAC, running on windows server.
    Thanks.

    Please refer :
    MOS note Id : [ID 378037.1] -- How To Install Oracle 10g Grid Agent On RAC
    http://repettas.wordpress.com/2007/10/21/how-to-install-oracle-10g-grid-agent-on-rac/
    Regards
    Rajesh

  • Need 11gr2 RAC install Guide on Solaris 10 x86 using containers and NFS

    I'm looking for an 11gr2 RAC install Guide on Solaris 10 x86 using 2-3 containers. I need to have the NFS server reside in the global zone or on a 3rd container visable to the two rac containers.
    Please share me installation guide!
    Thank you!
    PS - I currently have run into an install issue -
    Can't change ownership on /oracle/products/11.2.0/ocr/: not owner at /oracle/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 5014.
    I suspect the NFS share params from the NFS server in the global zone are not 100% correct to the two rac zones/containers.

    Have you visited Oracle Support Services website (formerly metalink) to determine if your desired configuration is supported?
    Last time I looked it was not.
    That said Oracle database installation guides are fully documented online.
    http://www.oracle.com/technetwork/database/enterprise-edition/documentation/database-093888.html

  • Oracle 10g R2 installation on sun solaris 10 Sparc machine

    Hi there,
    I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
    Error encountered:
    Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
    Passed
    Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
    Checking monitor: must be configured to display at least 256 colors Failed <<<<
    >>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,at which time they will be rechecked.
    Continue? (y/n) [n]
    The following were the steps taken before encountering the above error
    1. logged into a workstation
    2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
    3. keyed in the following at the command prompt
    DISPLAY=machine_name:0.0; export DISPLAY
    4. executed the following from the command prompt
    ./runInstaller
    Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
    Please help me with this problem.
    Thank you
    Ravindran Kanniah

    It is because of UNIX shell. I also faced this error during installation.
    First check your shell by the following command.
    $ echo $SHELL
    Then select the below.
    For csh shell
    $ setenv DISPLAY 192.168.1.128:0.0
    $ export DISPLAY
    For sh,ksh and bash
    $ DISPLAY=192.168.1.128:0.0
    $ export DISPLAY
    After you do this check the value of DISPLAY variable.
    $ echo $DISPLAY
    If the DISPLAY variable is set then run ./runInstaller.
    One advice: Keep a complete log of your terminal session. This will help you in future :)
    -aijaz

  • GDS Console Installation Guide for SP4 in Particular

    Hi MDM Gurus,
    I need GDS Installation Guide for SP4 In Particular, i have for SP6, as we are working on GDS Scenario for Retail.
    Quick response will be appreciated and rewarded with full points.
    Thanks & Regards
    Rehman Khan

    Hi Sigal,
    Thanks for your response, but unable to find your email id, its not updated in SDN.
    please let me know your email id.
    Regards
    Rehman

  • Installation guide for 9ias on RedHat Advanced Server 3

    Hi
    Does anyone has the installation guide for 9ias on RedHat Advanced Server 3 please? Thank you!

    there is an installation guide for oracle applic server 9 and above on red hat advanced server 3 in pdf format on the linux technology center page on oracle. here is the file link.
    "Install Guide: Oracle Application Server on Red Hat Enterprise Linux AS (PDF) May 2003"
    you may wanna check the following link for that page.
    http://otn.oracle.com/tech/linux/index.html
    is this what you are looking for?
    asif
         

  • Need Step by step installation guide for Cisco ISE in distributed environment.

                 Hi Friends,
    If anyone is having  step by step installation guide for Cisco ISE in distributed environment please shere!
    I have user guide from Cisco, but does someone have created at the time of actual installation.
    Thanks,
    Sachin

    There is a trustsec 2.1 how to guide on cisco's website. There is also a TrustSec 2.0 ISE Guide floating around that has step by step instructions for setting up ISE 1.0.4. Which is still pretty accurate for the 1.1.1 guide. But if you go through the below site it should give you all the info you need.
    http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns744/landing_DesignZone_TrustSec.html

  • I want pre and post portal installation guide for EP 7.0 ?

    Please give me links for portal(EP 7.0).Installation guide for pre and post installation steps to be followed.

    Hi,
    Refer this thread
    Portal 7.0 Installation Document/Screen Shots
    Portal 7.0 (ECC 6.0) Installation
    Regards,
    Senthil K.

  • Download Oracle 10g Character set scanner for Solaris

    http://www.oracle.com/technology/software/tech/globalization/index.html
    the above link contains only the oracle 9i Character set scanner but I need the Oracle 10g Character set scanner for Solaris
    please assist me.

    Pl see MOS Doc 745809.1 (Installing and configuring Csscan in 10g and 11g (Database Character Set Scanner)
    HTH
    Srini

  • Installation Guide for SAP NetWeaver Developer Studio 2.0.5

    Hi,
    The Sneak Preview Download of SAP NetWeaver on this site also contains the SAP NetWeaver Developer Studio 2.0.5
    I am trying to install this version. However, the installation guide provided alongwith this setup refers to the version 2.0.4
    I checked on SAP Service Marketplace too. It seems that even SAP has not issued anything for this version.
    Any ideas where I can get the relevant installation guide for v2.0.5?
    Thanks and Regards,
    Sagar Kirtany

    Hello Sagar,
    the Installation Guide for the Developer Studio is included in the "How To Install EP 6.0 SP 4 Sneak Preview Edition". But you have only to extract the ZIP File and start the JDTsetup.exe.
    Regards
    Gregor

  • After connecting a Hanns.G HL269 monitor to my MacBook air  I Installation Guide for windows 7. Where do I find installation guide for Mac? ?

    After connecting a Hanns.G HL269 monitor to my MacBook air I entered the disc for the Installation Guide for windows 7 that came with the monitor. Where canI obtain the installation guide for a Mac?

    Those are two Q&A steps from the manufacturer's website. The first one indicating that the "driver" CD is not necessary. The second one is worth following to make sure the monitor is behaving properly. In addition you can go into System Preferences > Displays and then the Arrangement tab to see if the monitor responses from there.

  • Installation guide for Oracle form/report 6i developer

    Hi all,
    Does anybody had an experienced to install Oracle form/report 6i developer or where i can find a step by step installation guide for Oracle form/report 6i developer? I've downloaded Oracle form/report 6i developer software and follow the installation guide but it's very unclear. And of course, failed few times. Please, help me out.
    Note: My OS is rhel 3(update 6) and I picked custom install (because i just need Oracle Forms, Oracle Reports, Sql*Plus)
    thanks in advance.

    See Metalink Note: 133125.1
    This is basically all that remains available for that version specific to installations.

  • Where to find Installation Guide for SAP Productivity Pak 4.3

    We are in the process of installing Productivity Pak 4.3 for a new client. There is no installation guide for 4.3 in English. When I go to the link for the 4.1 installation guide, it is no longer available through that link.
    Can anyone point me to the installation guide in English?
    Thanks in advance,
    Joe
    UPDATE: I found the 4.1 administration guide (https://websmp204.sap-ag.de/~sapdownload/002007974700000806942010E/RWDAdmin_41en.pdf). Looks like 4.3 EN is not available yet.
    Edited by: Belluso Joseph on Aug 10, 2011 6:09 PM

    Hi Belluso,
    Glad you could find it.
    Just an FYI for everyone else.
    [1600355|http://service.sap.com/sap/support/notes/1600355] - Installation files for SAP PRODUCTIVITY PAK 4.3
    Regards,
    Matthew

  • Installation guide for WAD BI 7 -  WAD without Portal ?

    Hello,
    I looked for a recent installation guide for WAD but I didn't find it, could you help me ?
    I want also to know if it's possible to use WAD without a portal.
    Thanks in advance for your help.
    Regards,
    Adrien
    Edited by: lozano adrien on Dec 5, 2008 6:53 PM
    Edited by: lozano adrien on Dec 5, 2008 6:53 PM

    hii lozano,
    The BEx Web Application Designer(WAD) is a desktop application for creating Web applications with BW/BI specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
    check the following threads on WAD:
    http://help.sap.com/saphelp_nw70/helpdata/en/00/e8d13f7fb44c21e10000000a1550b0/content.htm
    WAD
    WAD
    WAD steps
    hope it helps,
    regards,
    raghu.
    Edited by: Raghu on Dec 6, 2008 10:32 AM

Maybe you are looking for

  • To find the input fields for the given technichal names .

    Hi , This is for the transaction SU01. I have some technichal names for some fields in this transaction, CODVN BCODE GUIFLAG LIC_TYPE REF_USER. I want to find out the input fields in this transaction which correspond to the respective technichal name

  • A controller with the WLAN locked

    We have inherited a wireless network with 2000 & 4000 controllers. One of the controller has WLAN locked, so when users are attempting to login to this wireless network, they get a prompt, saying ?This network access needs a key to be authenticated;

  • Embed Word/PDF Documents in Documaker 12.1

    Hi We have a requirement to embed word/PDF documents during runtime . The path for the PDF/Word document comes as an input in a XML node and we would need to have them embeded/inserted in between the formset. We use Documaker 12.1 ODEE and would like

  • Gettin' tired of clicking "Show package contents" for avchd etc folders

    Hi I have many  avchd vid files in their proper folders saved on drives. Since upgrading to Mavs, if I want to look at the video and I'm not in FCPX, I have to click on 'AVCHD' and choose "Show package contents", then do the same with BDMV to finally

  • USB Smart Card reader

    I want to interface with a USB smart card reader to make a cash card system. I'm not going to be writing any code that goes on the smart card itself, just code that runs on a PC. Is the Card SDK what I'm looking for or am I way off base? If it isn't,