Quick and easy airport express question [expanding my network]

I have an airpot express unit, it works great, i have plugged in to my internet using an ethernet cable, I just want to know something: can i expand my network?? make it bigger?
I have airport express in my room, can i plugg another airport express on another room, make settings so that new airport express joins my current network, and like expand my internet connection, my problem is that i live in a house made out of concrete so, walls are really big and not thin at all, so when i go downstairs i loose my internet connecion, can i expand this with another airport express without having to connect the ethernet cable to the new airport express? I hope its not to confusing

Yes you can, when you plug the 2nd Airport Express in there is an option to join or extend an wireless network. This is what you would select to expand / extend your existing wireless network to other areas that may have a weaker signal.

Similar Messages

Poor network speed with 1st generation time capsule and multiple airport express 5Ghz. My network speed slows to a crawl when not close to the time capsule. I get the range that I need, but the speed is painfully slow.

Hello,
I have a first generation time capsule running 802.11n (b/g compatable) and the airport expresse's are the newer 5ghz models. I have 3 airport express's and I have the range that I need. I can run the time capsule using 802.11n 5ghz, but I loose the range and can't connect to all of the airport express's. My computers and mobile devices run 802.11n. Does anyone have any suggestions on how to increase the network speed. Would the new airport extreme fix the problem?
Thank you

Unfortunately, you are experiencing one of the downsides to 5 GHz. That's because the higher frequency 5 GHz signals are much weaker than 2.4 GHz signals.
After all, you always have to give up something to gain something else. In the case of 5 GHz, you gain potential speed but in return, you must give up penetration power and distance capability.
In order to work well, 5 GHz signals need to almost have a line-of-sight relationship between devices. Unless you can achieve this, you will do much better to leave the Time Capsule running at the 802.11n (b/g compatible) 2.4 GHz Radio Mode and allow the Express devices to "extend" that network.
As for the location of the AirPort Express devices in an exended network, that is critical for best performance. That's because the Express can only "extend" the quality and bandwidth of the signal that it receives. Post back if you need a few more tips on how to find the best location for the AirPort Express devices.
Would the new airport extreme fix the problem?
Unfortunately, no.

Attempted to set up an HP wireless printer and my whole network is now a mess. HP help told me I had too many signals, as I have a Time Capsule 4 Macs and 4 Airport Express set up. Anyone else figure this out?

I attempted to set up a new HP wireless printer. It is unstable and HP support says I have too many devices since I have a time capsule and 4 airport express either extending my network or being used for a different printer or stereos. Anyone else find that their Airport Express/Extreme interferes with a wireless printer. If so, what's the point?

I have a similar model, the HP 8500A here in the home office that I originally hooked up using wireless on an AirPort system consisting of an AirPort Extreme, Time Capsule and 2 AirPort Express devices.
The HP was originally hooked up to the "main" router using wireless as a test to see how wireless would perform. No issues with setup or performance over the first few weeks. I did eventually change the device to connect using Ethernet once I had room to move the device near the AirPort Extreme.
HP is pulling your leg with the advice about too many devices. The AirPort Extreme and Time Capsule will handle up to 50 wireless devices. In my case, I did nothing except follow the setup procedure and restart the entire network....something that I always do when I make any change to the network.

I have what is hopefully a quick and easy question. I kno...

I have what is hopefully a quick and easy question. I know almost nothing about this stuff so go easy on me . All I need to do is find out if my DHCP is enabled. I'm having problems with my Xbox 360 and one of the possible problems is this DHCP thing. However I have no idea how to find the settings for my router on my computer. If it helps I have a Wirless model BEFW11S4. Thanks in advance for any help.

You need to access your router to check if the DHCP is on. To access the router open your browser and type in http://192.168.1.1 into the address field and hit enter. That should open the routers log on screen and by default the user is left blank (some routers it is admin) and the password is abmin. If you changed your routers password as you should for security reasons then use that password. That will bring you to your routers user interface and on the main set up page should be your DHCP.
Richard Aichner (Ikester)

Can I use airport express to extend my network AND stream iTunes???

I have an airport extreme connected to the cable modem and sending a signal out to my home network. I also have a powerbook and an airport express connected to the home stereo.
My question is, can i use the express to extend my extreme signal (to reach the back yard) and stream music from itunes at the same time? The set up utility seems to suggest that you do one or the other.
Thanks!

Are you sure you configured the Express to extend the Extreme's network? If you use the standard setup, the two base stations will be indistinguishable, i.e. you'll only see one entry for the wireless network.
If you were connected to the Extreme when you configured the Express, try turning off Airport in the Airport menu and then turning it back on. The computer should pick up the stronger signal at that point.

Upgraded to iTunes 11.0.5 and now Airport Express doesn't work

Just installed the iTunes 11.0.5 update and now I can't get my Airport Express to work. iTunes won't play and says it can't recognize the Airport Express device. Even when re-booted at both the iMac and the Airport Express - the link is broken. iTunes won't even play the media when the Airport Express is selected -- but the Apple TV and the Computer both work well. Never had this issue before the 11.0.5 update. Any thoughts or assistance?

Thank you very much for your reply. I did find 2 previous iTune libraries but they seem to be empty.
Your advice on back up is gratefully noted ... I always assumed Time Machine would do the job.
I guess like many people I've spoken to it's time to move away from Apple ...a declinig market may be the only thing which will make them realise they need to be more responsive to and respectaful of the millions of individuals who have been their loyal customers for many years.
My business has started moving to Windows and we have been surprised how good it is and products like Office 360 are fabulous in the business environment. We have heaps of iMacs ready for the scrap heap!
I am now looking for an alternative to iTunes. Not an easy feat but clearly there is a huge market opportunity out there for someone to produce a decent product. Any suggestions gratefully accepted.

How can I set up a wi-fi network, using one time capsule and two airport express

how can I set up a wi-fi network, using one time capsule and two airport express ?
The time capsule is near the Mac. ok
The first Airport is on the corridor, ok, works well and the App on the iPad signals so, ok
But when I plug the next Airport on another room nearby nothing happens, and signals disconected ....
is the signal so weak that is not able to go to ono room to the other ?

Well, even if you have the first express set up to extend the network, the second express can only extend from the TimeCapsule.
Maybe you got walls of sheetrook in the way, or kitchen/bathroom tiles, etc, dampening the signal rapidly.

I have an Apple TV and an Airport Express, can I use these to stream all audio from either my iPhone or my MacBook Pro, including Pandora?

I have purchased an Apple TV and an Airport Express as a gift for a loved one and was under the impression that these two would not only allow for movies, videos etc would be streamed to the TV from my MacBook Pro, but also set up Airport Express with speakers and stream music from my laptop or iPhone. Is there a way for all music, including Pandora, to be streamed through the Airport Express? I can only figure out how it works with iTunes, not Pandora.
Thanks for the help!!!

You might want to take a look at Airfoil for Mac to be able to stream any audio source on your Mac.
Rogue Amoeba | Airfoil for Mac: Wireless Audio Around Your House

After the Airport update today, Airport Utility no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green?

After the Airport update today, Airport Utility 6.0 no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green? I'm running Lion on my iMac and updated when Airport Utility prompted me to do so a few hours ago. After applying the updates is when Airport Utility stopped seeing my routers. But they are working? Thoughts?

Did you remember to completely power cycle the entire network?
You would want to do this after any update or change to the network.
If you did not do this yet......things are out of sequence.
Power off everything on the network.....all devices.....power down order is not important
Wait a few minutes
Start the modem first and let it run a minute or two by itself
Start the next device connected to the modem the same way
Work your way out on the network starting each device about a minute apart
Check the network

I recently (Jan 2012) acquired a MacBook Pro (MBP) running 10.7.4 and an AirPort Express. I also have an old PPC G4 tower (Digital Audio model) running 10.4.11. The OS software on both machines is totally up to date. AirPort Utility on the G4 is 5.4.2

I recently (Jan 2012) acquired a MacBook Pro (MBP) running 10.7.4 and an AirPort Express. I also have an old PPC G4 tower (Digital Audio model) running 10.4.11. The OS software on both machines is totally up to date. AirPort Utility on the G4 is 5.4.2 and on 6.0 on the MBP. I bought a used AirPort card for the G4, I believe it is 802.11b compatible, and the wireless data rate is specified at 11 Mbps. Being a newbie to wireless, it took me many days to get these two machines to link up. This network is not connected to the internet, and there no other networks in the vicinity.
My last problem to solve is the very slow file transfer speeds between the two machines. The transfer time seems to vary depending on which machine I use to initiate the transfer, and which direction the transfer is going. For example: If I initiate the transfer from the G4 and send a 5.4MB file to the MBP it takes 1:32 (min:sec), while the same file going from the MBP to the G4 takes 27 seconds. On the other hand if the transfer is initiated on the MBP, going from the MBP to the G4 takes 2:56, while going from the G4 to the MBP takes 1:59. I realize that these times are not actual wireless transfer times but includes the entire transfer process.
Both machines and the AirPort Express are within a 4-foot radius. Both machines are set to radio channel 2. The AirPort Express is set for 802.11n(802.11b/g compatible) with WPA/WPA2 Personal wireless security.
Any help would be appreciated.
CEU2

BDAqua,
Thanks for the response.
Apple has used the term "Digital Audio" to identify this machine. System Profiler has the following information:
Machine Name:          Power Mac G4
Machine Model:          PowerMac3,5
CPU Type:          PowerPC G4 (2.1)
Number Of CPUs:          1
CPU Speed:          800 MHz
L2 Cache (per CPU):          256 KB
Memory:          768 MB
Bus Speed:          133 MHz
Boot ROM Version:          4.3.3f2
Serial Number:          XBxxxxxMK9
Sales Order Number:
Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet. The machines are not always so close together, I did that to simplify the testing. With the very slow transfer speeds I am reluctant to move ahead with the internet step.
<Edited By Host>

How to setup a network with a time capsule, airport extreme and an airport express?

Hello.
First I want to make it clear all my knowledge off wireless networks is going on forums on the internet, before a couple of months ago I didn't realize wireless networking was so intricate so forgive my lack of experience.
I just bought a time capsule (today, 4th generation), I have an airport extreme bought in January 2011 (they just got refreshed so mine is now one generation old) and the same with my airport express (bought in January).
I originally bought the airport extreme and setup a wireless network using the dual band setup. I have no issues with the 5ghz network and most of my devices run on wireless n so I had no issues with them. my only two wireless devices that can not use the 5ghz network is my iPhone 4's which use wireless n but it has to use the 2.4ghz signal. Problem is in my apartment I am bombarded with other peoples 2.4ghz networks so my signal is terrible 10-15 feet from the airport extreme. Near my extreme I am getting signal ranges around 15mb to 20 mb. When Im about 15 minutes away in my bedroom (so one wall in between) my signal plummets to 1-2 mb. sometimes as low as 0.17mb which is not good. I got the airport express to extend my range and placed it in my bedroom. . After setting up the airport express the signal still was terrible. I researched and realized that if the signal strength ***** then the airport express cant boost the signal as much which makes sense in hind sight. I then researched setting up a roaming network or a WDS network. Per research a WDS network was not recommended b/c I was not using a wireless g network. I attempted to create a roaming network and then realized that you can not use an airport express in a roaming network. This has led me to now buy a time capsule.
First, in my setup do I or should I have the time capsule as the primary? I believe its more powerful than the airport extreme but Im not sure if that matters in a network that is distributing wifi from ethernet (thats how I am connected the extreme and the time capsule)
so can I do
cable modem ETHERNET Airport extreme(in the living room where its always been and works great in that immediate area) (3rd generation) ETHERNET Time Capsule(in the bedroom where I usually get poor signal) (4th gen) and then an airport express connecting to the 2.4ghz signal in the bedroom where the time capsule also is EXTENDING the wireless range?
or should it be the time capsule first bc its more powerful?
I tried setting up this setup and everything is green but I don't know if what I am doing is actually working on full cylinders b/c I am confused on some aspects. mainly on the airport extreme which is the primary device I have under the wireless tab selected create a wireless network and on the time capsule it also is on create a wireless network with the network name being exactly the same. Should it be changed to extend a wireless network? and then bridge mode? Should I have different channels for the different devices that are on 2.4ghz?
I am open to hear ANY suggestions, or ideas to improve my setup. PLEASE PLEASE HELP!!!!!!!, lol its been 5 long months of poor internet in my bedroom where my wife has her setup with a roku box and wifi tv (I have those hardwired for now) but mainly for her iPad and iPhone b/c its so bad sometimes she has to turn wifi off and use 3G. I have same issue in my bathroom, sometimes Im getting decent signal and sometimes its so bad I can't open the link on an RSS feed in safari which I have to assume doesn't require that much bandwith?
I have no wireless g devices. The only device I need 2.4ghz for is my iPhone 4's but they both use n also. All my other deivices connect on 5ghz and my 5ghz network is decent, a lot better than the 2.4ghz network atleast.

You wrote so much that I find it hard to address all your concerns. However, here are some thoughts:
1) I'd configure the Time Capsule as the "main" router, connected directly to your cable modem. Configure it to "create a wireless network" and to "Allow this network to be extended". Configure the other devices to "Extend a wireless network".
2) Put any device that's extending the network half way between the main router and the wireless clients. If the signal from the main router is weak at the cllient's location, then the extending device will also receive a weak signal.

How to set up and configure AirPort Express for AirPlay and iTunes

Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

Here you go ...
How to set up and configure AirPort Express for AirPlay and iTunes

What is the maximum distance between a time capsule and an airport express?

What is the maximum distance between a time capsule and an airport express?

You can only "extend" the signal one time, so you need to have the AirPort Express located approximately 1/2 to 2/3 of the distance from the Time Capsule to the area that needs more wireless coverage.
I doubt that this will help much since you have a very challenging setup. Wireless is really only for "same room" or "nearby rooms" around the corner.
To do this correctly you will need to use an Ethernet cable connection from the Time Capsule to the AirPort Express, which could then be located close to the xBox.
If it is not possible to run the Ethernet cable, you might look at a pair of Ethernet powerline adapters to send a "psuedo" Ethernet signal over the AC wiring in your home.
This will not be anywhere near the performance of a regular Ethernet cable, but it will likely be much better than wireless.
Since Ethernet over powerline (EOP) is somewhat unpredictable, you would want to have a very clear understanding of the store's return policy in case things don't work out as hoped. Any computer / electronics superstore will have a selection of powerline adapters to choose from.

Can you help with D-link and two airport express stations

I currently run a Dlink 604 wireless and 1 Airport express for iTunes in my front room.
A Express is also linked to the Dlink via a cable.
All works fine - G4 dual running OS x 10.3.9
I would like help with a couple of things please:-
1. I have no current security on my Express, so anybody can use the net connection through it. How do I change this and still be able to use my tower and laptop?
2. I have a second Express from work that I would like to use upstairs. It does work but requires me to swap the network to use it for iTunes and then I have no internet.
It was formatted at work so has different ip numbers etc.
Can I make this station join my exisitng network?
As my lap top is wireless will I be able to surf through it upstairs?
Thanks
JohnO

1. You need to open the Express's configuration in Airport Admin Utility and change the Wireless Security settings to WEP or, preferably, WPA or WPA2. When you attempt to connect to the network from your computers, you will be prompted for the password.
2. The easiest thing to do is to hard reset the second Express and then use the Airport Setup Assistant to configure the second Express to join and extend the first Express's network. To do a hard reset, hold down the reset button until the LED starts flashing rapidly.
BTW, I know it can work because I have the exact same setup (D-Link DI-604 and two Expresses in an extended wireless network).

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

Quick and easy airport express question [expanding my network]

Similar Messages

Maybe you are looking for