Quick and easy battery question

I just got my iPhone yesterday and let it charge fully overnight. But my question is: if the battery is about half-full, is there any harm done in charging it fully from this state? Or do I need to let it die down fully/give me the low battery warning before charging it? And I know that I should do a full charge/discharge cycle once a month or so.
Thank you for your help!
Jay

You can charge whenever you want, it has a Lithium Ion Battery that can be charged at any time without and harm done. It is good too let iPhone die every so often and then fully recharge.

Similar Messages

  • Quick and easy TM question

    Hi there
    My macbook is acting up, sending it in for a service, can I plug in my external hard drive into another mac computer and start pulling applications / documents / e-mails off time machine and start working again, or if I plug it into another computer will it automaticlly start backing up whats on the new computer? thanks for your help

    Suziesue wrote:
    can I plug in my external hard drive into another mac computer and start pulling applications / documents / e-mails off time machine and start working again
    Yes. Use Migration Assistant to do all that for you. You definitely want your user account and applications. You probably don't want system settings.
    if I plug it into another computer will it automaticlly start backing up whats on the new computer?
    It will ask first and you can tell it no.
    When you get your old machine back, use Spotlight to find all modified files since you used Migration Assistant so you know what files to copy back.

  • I have what is hopefully a quick and easy question. I kno...

    I have what is hopefully a quick and easy question. I know almost nothing about this stuff so go easy on me . All I need to do is find out if my DHCP is enabled. I'm having problems with my Xbox 360 and one of the possible problems is this DHCP thing. However I have no idea how to find the settings for my router on my computer. If it helps I have a Wirless model BEFW11S4. Thanks in advance for any help.

    You need to access your router to check if the DHCP is on.  To access the router open your browser and type in http://192.168.1.1 into the address field and hit enter.  That should open the routers log on screen and by default the user is left blank (some routers it is admin) and the password is abmin.  If you changed your routers password as you should for security reasons then use that password.  That will bring you to your routers user interface and on the main set up page should be your DHCP.
    Richard Aichner (Ikester)

  • I want to install just ADOBE photoshop quick and easy. how?

    I want to install ADOBE photoshop quick and easy. how?

    You can download it from this page : http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop
    Regards,
    Ravi.

  • Lesson for this weekend: Don't trust "quick and easy"

    When they say a process will be simple, quick and easy it really means it may or may not explode in your face!Started out on Friday simply wanting to write a new post for my site and update some old articles. Found out the php upload limit was too low for some of the server photos I wanted to add. No problem, just increase the limit right? Well no. Since the site was still in "Safe Mode" I couldn't change any of the advanced functions. The solution? Switch to Free Mode, billed as a simple process of a few clicks. Lets do this then! Clicked the deceptively easy "Switch to Free Mode" button prepared for a few clicks and getting on with my day. Filled out the information, set the flags I wanted, clicked go.....and it failed. That's fine, it went back to safe mode so I can just retry, right? Fails again. Third times the charm? Nope.At this...
    This topic first appeared in the Spiceworks Community

    When they say a process will be simple, quick and easy it really means it may or may not explode in your face!Started out on Friday simply wanting to write a new post for my site and update some old articles. Found out the php upload limit was too low for some of the server photos I wanted to add. No problem, just increase the limit right? Well no. Since the site was still in "Safe Mode" I couldn't change any of the advanced functions. The solution? Switch to Free Mode, billed as a simple process of a few clicks. Lets do this then! Clicked the deceptively easy "Switch to Free Mode" button prepared for a few clicks and getting on with my day. Filled out the information, set the flags I wanted, clicked go.....and it failed. That's fine, it went back to safe mode so I can just retry, right? Fails again. Third times the charm? Nope.At this...
    This topic first appeared in the Spiceworks Community

  • E1200 and "Quick and Easy Setup"

    My parents were trying to setup their E1200 router. We had to do a reset (using the button) since we couldn't access the router admin menu (someone had hacked/changed the password). I'm doing this remotely over the phone.
    Now, when they open Internet Explorer, they are getting a"Linksys Quick and Easy Setup" screen no matter what web site they try to get to. They don't have access to the original CD to install Linksys Connect. Mom says that when she clicks on "No CD? Download the software" link, nothing happens. Looks like she's got internet, though, as there's a link to the Linksys forums, and she's seeing updates from the forums."
    I don't know what this screen looks like, but isn't there some way to get past this splash screen? The computer is plugged into the router via a cable, so I'm not sure why they can't access the internet manually. Is there a way to just "disable" the "Quick and Very So Not Easy Setup" and skip right to using the internet?
    Thanks.

    Hi dapupster. I suggest that you let your parents do another reset. Tell them to make sure that they press down the reset button that's underneath the device ( please check the  picture). Let them press it down for 30 seconds while the device is powered on.  Once done, let them unplug the unit, plug it back in and try to access the setup page manually through 192.168.1.1.
    If the challenge remains the same, let them unplug the router from the modem and have them access the 192.168.1.1 page with only the computer that's connected to the router.  Hope the suggestions help.

  • Quick and easy way to learn to use Oracle Spatial?

    Could anyone recommend a quick and easy way to learn to use Oracle Spatial?

    Depends on your style.
    Reminds me of a story a contractor to an IT department I worked in once told me.
    He used to work in Silicon Valley in the '70s and told a story of a company that
    hired a particular programmer who was brilliant but unstable. They used to set
    up a room with a VT100 and a bottle of Tequila. The programmer would arrive
    and set to work. As the Tequila emptied it was replaced. At some point over
    the following days or weeks a scream would be heard from the room, followed
    by a crash as the VT100 went through the window and the programmer disappeared.
    They would replace the window, the VT100, the Tequila and wait till he came back
    from "walkabout".
    "Extreme Programming" '70s tyle!
    OH&S would never allow this nowadays! That, plus Prozac means these sorts
    of programmers are probably very rare!
    Cheers!
    S.

  • Quick and easy question about creating folder

    Total Mac newbie with basic question.
    I want to put all my user manuals right on my desktop. All in a folder called user manuals. How would I do this? Smart folder? Just drag 'n drop? how can I quickly find them all?
    Thanks in advance!

    Hi MarieBoyer
    You can easily create a Folder on the desktop, by mouse click + contol to open the contextual menu, where you can choose New Folder, then give it a name.
    Or, more easily still just drag one of the existing folders onto the desktop and use it.
    As for finding all manual documents, they are just documents in general, and may not even have the word manual in their name, so searching by that criteria will in that case miss them. Otherwise you may have to search by each of their names, which would be rather tedious.
    So I suggest, of the manuals that you know of or come across, drag them into your new Folder on the desktop as you find them.
    regards roam

  • A quick and easy question about my NEW Ipod Touch.

    Okay, I broke down and replaced my old ipod. This new one came with earphones, a cord to connect it to my computer and a little plastic piece that obviously fits on one end of the ipod. Here's my question: WHAT IS IT FOR?
    Thanks in advance!
    Annie

    It's a dock adaptor. There are some devices (eg. speaker systems) which have a slot that fits the 30-pin dock connector for iPods, but the slot is the same size as the iPod Classic, as it is the largest iPod that is compatible with such systems. The dock adaptor that came with your iPod is supposed to fit around the base of your iPod and prevent it from being bent forwards or backwards, as this can damage or even break the dock connector.

  • Quick and Easy WiFi vs. 3G Question

    Hi,
    I am just wondering what the difference in terms of performance is between WiFi and 3G. I have unlimited 3G usage, but if I find myself in a location that has free WiFi, is there any advantage to using the WiFi for iPhone internet browsing? Is WiFi faster or slower than 3G for loading pages, checking mail, or using the App store?
    Does WiFi or 3G drain battery faster?
    If 3G is better, should I just have my phone stop detecting WiFi networks?
    Thank you all for your time.

    Internet access via an available wi-fi network is faster than internet access via 3G and uses less battery than 3G.

  • Quick and easy question

    Hello gang! When I use the brush tool to fill in some pixels a few other pixels nearby or pixels very far away will also get colorized. Why is this happening? It is super annoying as I need to recolor those pixels which I did not want to colorize.
    Secondly (and totally unrelated to the first question), when I use the fill tool to replace one body of pixels that are one color into another, it will sometimes fill in what I requested and also an extra layer, making the shape fatter. Not sure I am explaining this very well.
    Any help with the above questions would be greatly appreciated!
    -Pebble, the Photoshop Noob.

    Hi Pebble!
    Some examples would help a lot in analyzing your problems.
    For the first one, it would be good to know what brush size, softness, etc you use and whether you use precise cursor setting.
    Also, what do you mean by "very far away"? 10 pixels? 1000 pixels? Again: brush size? Softness? Airbrush on?

  • A SIMPLE QUICK AND EASY QUESTION TO ANSWER

    Why is it that I don't see the object I'm trying to transform move AS I adjust it in real time anymore? What setting did I accidentally press? I've been trying to find out and but I can't.....and I'd just die if I have to put up with not being able to see what I'm moving moves as I modify it.

    You have turned off Live Update, a button at the top of the timeline window.

  • Ok. quick and easy question about my Zen Vision

    i'm thinking that my zen can no longer have anything added to it, although there is about 5 gbs worth of space left. it sucks has sucked for a while, but i'm trying to get over it.
    my brother noticed that in the bottom of it, the part where it connects so you can make transfers and stuff, is bent. i tried unbending it but that didn't work.
    and when i connect it to my comp, it says "overload" and my comp freezes for a bit.
    so that's a sign to get another mp3 player right? it's a shame that this happened. he thinks i was too rough with it.
    i admit that i have spent some time pushing it in when it wasn't properly fitting. but i didn't "see" it then. now looking back, i kinda laugh.
    btw, there are no shops around here to repair the bend to the best of my knowledge..actually, maybe Weiss Hardware...just maybe.

    Yes. LOL You word it so much nicer!
    lol...
    if customer support actually does help, for a nice price, you will be -my new saviour-!
    (My music is literally my life.)
    OK. I checked there. They have an option of support (while the warranty is still good) and another option (that's non-technical).
    I got my first Zen Vision (30 GB) March 2007. Then a replacement (this one) in May 2007. Is it still covered? I have my doubts. :P?

  • Very quick and easy question

    I am making a catalogue, so I need a set of place-holder images which I am able to change he actual image on the following pages after the master one so that I can then move the master image place holders and have all the pages follow accordingly whilst respectivly keeping their different image assigned.
    In other words, is there any way I am able to set a 'place-holder' on master page, then assign different images to the following pages, then if I need to move the layout I can just move the place-holders on the master frame whilst keeping their own set images within the place holders.
    Thank you very much.

    There are a couple of approaches.
    Automatic page numbering is accomplished by putting a text frame on the master page and inserting a current page number marker. You can add additional information or text in the frame if you wish, and format to taste. The number will appear on all pages based on that master.
    Now for the different approaches. The first way is to just add them independently to each master page. However, if you use masters based on one or more other masters to control things that are basically the same (i.e. you have repeating elements on at least two masters, but something else that's different) you can create a "parent" page and put the numbers on that, then base other master pages on the parent, and everything on the parent will be included in the "child" page. You can Ctrl + Shift Click to select and remove an item if necessary. If you want to edit the repeating elements you do it on the parent page, and the change propagates through to the children.
    If you want to have some pages with no numbers you can either make special masters without numbers for them, or just override and delete the number frames on the live pages.
    Peter

  • Quick and easy question (running error)

    Whenever I try to run an applet I download the source for, either on this CD I have for my Java book, or from the net, I get:
    java.lang.NoSuchMethodError: <whatever the method is>
    Exception in thread "main"
    And it won't run. Even a simple program like the one at http://www.oreilly.com/catalog/javanut/examples/section4/FirstApplet.java won't work. It compiles just fine though.
    Also, I get the same error, seemingly randomly when I try to download any non-applet program and run it, even when I open up a new file and copy paste it the code into it. (which doesn't make sense to me considering I can write programs from scratch and they run just fine!?)

    java.lang.NoSuchMethodError: <whatever the method is>
    Exception in thread "main" your getting this message, probably because you are trying to the application as a regualr Java application (console or JFrame). Running an Applet is different. there are two way to execute the applet: by an applet embeded in an HTML file, or by using an AppletViewer
    use google to find tutorial on how to execute an applet.

Maybe you are looking for