Quick and easy install for wrt54g ver 8?

So I decide to build my own computer. Not smart considering I'm a man with low patience. I finally got everything to work. This router won't. I don't feel like going through the manual. Mainly because when I installed this a while ago there was a program you could download from Linksys. The program would detect routers and such that didn't install correctly and fix it. Is it still around or do I have to go through the manual?

If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Similar Messages

Quick and easy fix for linux shell script in 1.2.1.32.13

Hello, right after installing sqldeveloper in my home directory and linking the script in my bin dir I found a small problem with the shell script for linux.
I downloaded the "Multiple platforms" zip file.
here is the fix:
change "dirname $0" to "readlink -f $0 | xargs dirname"
with this fix, linking to the shell script won't cause the script to use the bin dir instead of the real directory where sqldeveloper is installed.

This symptom occur because a 64-bit process that runs on a computer that is running an x64-based version of Windows cannot load the 32-bit .dll files that are required by some program features.
You may try the following work around:
You must use the 32-bit version of Windows Explorer. The 32-bit version of Windows Explorer is located in the %windir%\Syswow64 folder on the computer that is running an x64-based version of Windows.
To use the 32-bit version of Windows Explorer, follow these steps:
Click Start, click Run, type the following in the Open box, and then click OK:
Drive_Letter:\windows\syswow64\explorer.exe /separate
Note The placeholder Drive_Letter represents the drive where the x64-based version of Windows is installed.
For more information:
Some Windows Explorer extensions and some Control Panel items are not displayed on computers that are running an x64-based version of Windows
http://support.microsoft.com/kb/895561#appliesto
Now check if the issue is resolved.
You may want to try the following steps:
PDF thumbnail view via the Acrobat reader:
1. Run Acrobat Reader. In Reader, click File > Open and navigate to the folder(s) containing your PDF file(s). If necessary, move the slider to show all your PDF files.
2. Cancel out of Open and exit Reader.
3. Open Windows Explorer and navigate to the folders(s) containing your PDF file(s).
4. Click Views and move the slider until you see PDF thumbnails.
Thanks and Regards:
Sanjay Manju Suman
Adobe System Inc.

Quick and easy question for selection structures

i'm new to java since I started an online course at school, and I was wondering if there was an 'and' conjuctive? i want to have a selection condition where two criteria must be met as opposed to using || where either one triggers a statement.
the assigment is about using client programs. i want a dog to interect a certain way when it is aggressive AND hungry
ex:
if (dog1.getAgression () > 5 'AND' dog1.getHunger () > 5)
// dog is hungry and territorial
System.out.pritnln (dog1.getName + ": ");
dog1.barkAngry
}

.... Points me += -1.Points to you -= 1you.points--What's your point?one more than hisGood point!

I want to install just ADOBE photoshop quick and easy. how?

I want to install ADOBE photoshop quick and easy. how?

You can download it from this page : http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop
Regards,
Ravi.

Lesson for this weekend: Don't trust "quick and easy"

When they say a process will be simple, quick and easy it really means it may or may not explode in your face!Started out on Friday simply wanting to write a new post for my site and update some old articles. Found out the php upload limit was too low for some of the server photos I wanted to add. No problem, just increase the limit right? Well no. Since the site was still in "Safe Mode" I couldn't change any of the advanced functions. The solution? Switch to Free Mode, billed as a simple process of a few clicks. Lets do this then! Clicked the deceptively easy "Switch to Free Mode" button prepared for a few clicks and getting on with my day. Filled out the information, set the flags I wanted, clicked go.....and it failed. That's fine, it went back to safe mode so I can just retry, right? Fails again. Third times the charm? Nope.At this...
This topic first appeared in the Spiceworks Community

When they say a process will be simple, quick and easy it really means it may or may not explode in your face!Started out on Friday simply wanting to write a new post for my site and update some old articles. Found out the php upload limit was too low for some of the server photos I wanted to add. No problem, just increase the limit right? Well no. Since the site was still in "Safe Mode" I couldn't change any of the advanced functions. The solution? Switch to Free Mode, billed as a simple process of a few clicks. Lets do this then! Clicked the deceptively easy "Switch to Free Mode" button prepared for a few clicks and getting on with my day. Filled out the information, set the flags I wanted, clicked go.....and it failed. That's fine, it went back to safe mode so I can just retry, right? Fails again. Third times the charm? Nope.At this...
This topic first appeared in the Spiceworks Community

E1200 and "Quick and Easy Setup"

My parents were trying to setup their E1200 router. We had to do a reset (using the button) since we couldn't access the router admin menu (someone had hacked/changed the password). I'm doing this remotely over the phone.
Now, when they open Internet Explorer, they are getting a"Linksys Quick and Easy Setup" screen no matter what web site they try to get to. They don't have access to the original CD to install Linksys Connect. Mom says that when she clicks on "No CD? Download the software" link, nothing happens. Looks like she's got internet, though, as there's a link to the Linksys forums, and she's seeing updates from the forums."
I don't know what this screen looks like, but isn't there some way to get past this splash screen? The computer is plugged into the router via a cable, so I'm not sure why they can't access the internet manually. Is there a way to just "disable" the "Quick and Very So Not Easy Setup" and skip right to using the internet?
Thanks.

Hi dapupster. I suggest that you let your parents do another reset. Tell them to make sure that they press down the reset button that's underneath the device ( please check the picture). Let them press it down for 30 seconds while the device is powered on. Once done, let them unplug the unit, plug it back in and try to access the setup page manually through 192.168.1.1.
If the challenge remains the same, let them unplug the router from the modem and have them access the 192.168.1.1 page with only the computer that's connected to the router. Hope the suggestions help.

I have what is hopefully a quick and easy question. I kno...

I have what is hopefully a quick and easy question. I know almost nothing about this stuff so go easy on me . All I need to do is find out if my DHCP is enabled. I'm having problems with my Xbox 360 and one of the possible problems is this DHCP thing. However I have no idea how to find the settings for my router on my computer. If it helps I have a Wirless model BEFW11S4. Thanks in advance for any help.

You need to access your router to check if the DHCP is on. To access the router open your browser and type in http://192.168.1.1 into the address field and hit enter. That should open the routers log on screen and by default the user is left blank (some routers it is admin) and the password is abmin. If you changed your routers password as you should for security reasons then use that password. That will bring you to your routers user interface and on the main set up page should be your DHCP.
Richard Aichner (Ikester)

Why there is no update for WRT54G Ver 7?

Why there is no update for WRT54G Ver 7? I can only see Ver 1, 1.1, 2, 3, 4, 5, 6, 8

hi Gavlin:
You would downknow the firmware of wrt54g v7 at the www.linksys.com.cn ,this is the chinese web .

Downloaded latest version on my laptop. Doesn't syn but only do recognize my iPhone 5 of 2012. Uninstall and re install for few times and it doesn't work at all! Can't back up data anymore. Please advise.

Downloaded latest version on my laptop. Doesn't syn but only do recognize my iPhone 5 of 2012. Uninstall and re install for few times and it doesn't work at all! Can't back up data anymore. Please advise.

Uninstall and re install for few times and it doesn't work at all!
Are you (currently) getting an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

Quick and easy way to learn to use Oracle Spatial?

Could anyone recommend a quick and easy way to learn to use Oracle Spatial?

Depends on your style.
Reminds me of a story a contractor to an IT department I worked in once told me.
He used to work in Silicon Valley in the '70s and told a story of a company that
hired a particular programmer who was brilliant but unstable. They used to set
up a room with a VT100 and a bottle of Tequila. The programmer would arrive
and set to work. As the Tequila emptied it was replaced. At some point over
the following days or weeks a scream would be heard from the room, followed
by a crash as the VT100 went through the window and the programmer disappeared.
They would replace the window, the VT100, the Tequila and wait till he came back
from "walkabout".
"Extreme Programming" '70s tyle!
OH&S would never allow this nowadays! That, plus Prozac means these sorts
of programmers are probably very rare!
Cheers!
S.

Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

Hello. I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever). My friend at work said it would do all the setup pretty much automatically for me.
I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow. Anyways, what I need, is a step by step/screen by screen directions for a secure network. I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly. I also am not totally confident in its security as it is now. (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
So here are the things I am trying to connect:
Liksys WRT54G ver. 6
Gateway Laptop running Windows Vista
XBOX 360 - WIRED
(I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
Here are the settings that I have so far:
Changed the Router Name
Changed the SSID
Have DHCP set to 3 (XBOX, PC, Laptop)
Wireless SSID Broadcast: Disable
Username and Password changed to my own info
UPnP: Enable
I may have changed other things without knowing it. So like I said, a complete, step by step screen by screen set up would be totally appreciated. I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions? I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
Thanks a lot (in advance)!

So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Uninstalling files installed by WRT54G ver.7

Can anyone tell me how to uninstall all files installed by the WRT54G ver.7 CD? So i can begin all over again with installing my router, cause i screwed up.

Is there an entry to uninstall in add/remove control panel, or in the start menu? You could also set it up manually...

Need 110-240V Power Supply for WRT54G Ver 8.0 12V 0.5A DC

Can anybody sell me a power supply for my WRT54G Ver 8 wireless router?
Need 110-240VAC to 12V 0.5A DC
If you cannot sell me this item, can you recommend an online vendor?
Thanks a lot.

I checked on the wireless routers adapter .. it shows ...
Ac Input 5V 2A Jack Type : BIG BARREL AC Input 110~120V

File and print sharing with wrt54g, ver. 6

computers connected to my wrt54g, ver. 6, router (firmware ver 1.01.1) cannot see each other's shared files although they can all share the same internet connection just fine. file and print sharing has been set up on each (they were connected to a wired router before i purchased the wrt54g and they saw each other and shared files, no problem). how can i share files through this router? what went wrong?

Are you running software firewalls on any computer? Has the LAN IP network changed (e.g. it was 192.168.0.* before and now 192.168.1.*)?

Black and White Preview for all images Quick and Easy can it be done?

Before I switched to Mac, I used a google program to do my iphoto/aperture like editing called Picasa. Picasa allowed me to change my view to black and white so that all my images looked black and white until I changed my view back. This was GREAT for letting me look at a wedding or a group of images and quickly scan for the ones that looked spectacular in black and white as apposed to color.
I have been desperately trying to find a setting in Aperture that will allow me to do that so that I can get a super quick preview of everything and mark the ones that I want to really spend time converting to black and white.
Does anyone know how to do this? I would almost be willing to change my monitor settings to greyscale temporarily if that is even possible.

What I do is this:
In the View Menu set Proofing Profile to Gray Tone.
Then anytime you want to see things in B&W, hit ShiftOptP
(Pictures are only B&W in Viewer only mode--large or full screen. But you can use the arrow keys to move through a whole album)

Quick and easy install for wrt54g ver 8?

Similar Messages

Maybe you are looking for