Quick change of external HD from AEBS to firewire?

I am wondering if there is any way to quickly change the connection of my LaCie 300 gb external HD from AEBS to firewire and back. I can get it the drive to work over AEBS for streaming my music etc., but for alot of stuff it is too slow. I want to be able to connect my external HD to firewire when I am importing music and moving large files to my HD, and then quickly change to the AEBS when I want to move about the house with my laptop. Currently I have to disconnect the wires and reboot. Any ideas or programs that might help me? Thanks!
1.25 GHz Powerbook G4 Mac OS X (10.4.10)

Currently I have to
disconnect the wires and reboot. Any ideas or
programs that might help me? Thanks!
Actually the right thing to do is to "eject" the disk first, disconnect the wires and then reboot. Doing anything else is a great recipe for disk corruption.

Similar Messages

How to change in External Editing from Edit in CS4 to CS5?

In LR 3.2 (was also in 3.0) Preferences/External Editing it says in the top position "Edit in Adobe Photoshop CS4" even after reinstalling LR 3.2.
Originally I had installed CS4 and LR 2.7, then I installed CS5 and LR 3.0 but the top position remained with edit in PS CS4. Then I added CS5 as an additional external editor in the Preferences/External Editor, so far ok.
The problem: If I want to "Merge to HDR in PS" it goes to CS4 and not to CS5. I assume that it would go to CS5 if CS5 would be in the top position but I can't find out how I could change the top position from CS4 to CS5. Any hint would be appreciated as long as it does not say to reinstall CS5 and LR3.

It's a common problem. You'll need to reinstall CS5 as the Lr is getting the wrong key.

Change messagename(external msg) without losing the messagemapping

HI all,
I´m using an external message "externalmsg1" with messagename(root) "test".
I´ve created a messagemapping by using "test"(external msg) as source and 2 RFC messages(multimapping) as target.
Now the messagename(inside the external message) was changed from "test" to "test_new".
Did you know how to change the external message from "test" to "test_new" WITHOUT losing the mapping ?
note: only the messagename was changed. The structure is the same!
Thanks for your help,
Gordon

Hi Gordon,
You can consider using mapping templates in PI:
http://help.sap.com/saphelp_nw04/helpdata/en/79/2835b7848c458bb42cf8de0bcc1ace/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50171256-1ee2-2a10-3f84-ddecf098f724?quicklink=index&overridelayout=true

Error in changing the number range from the external to the internal no.

Dear all,
             Here is the error found when using the T-Code PA30 for hiring an employee. while changing the number range from external to internal using Tcode PE03, the error found was ' could not find interval for the number range'
Can anyone help me out?

Hi,
     Thanks for your reply.
Please check out what i have done
The number range intervals displayed using T-code PA04 are
No        From                    To                           Current No.               Ext.
1       00000001            00069999                                                  checked
2       00070000           00079999                 70295                       unchecked
3       00080000          09000000                                                   checked
Using T-code PE03, the feature numbkr was changed i.e the return value has been changed from 3 to 2(internal no. assigned)
Error found when performing action using T-Code PA30 is -could not find interval for the number range 2.
Could you please clarify?
Thanks

LR 4.3 - Can't Change External Editor from CS6 back to CS5

Using LR 4.3 because of Retina Screen MBP. Downloaded trial copy of CS6 with patch. Every time I use CS6 as an external editor from LR, it crashes, especially when cloning. Want to change back to CS5 as external editor in preferences but it doesn't seem to be an option. Any way to do this?
Thanks
Barry Fisher

As long as CS6 is installed Lightroom will choose it as the primary external editor. You can however have CS5 as a secondary editor.
You do not choose the primary editor it will only be Photoshop, Lightroom will choose the most (senior) one installed CS over Elements and the latest version.

Illustrator CS4 or CC, effect that lets you quickly change from color vector vector grayscale?

In Illustrator CS4 or CC, is there an effect that lets you quickly change a color vector illustration into a grayscale vector illustration?

edit >> edit colors >. convert to grayscale

Changing External Editor from Photoshop CS to CS5

I've looked through the preferences pane but for the life of me can't figure out how to get iPhoto to switch its external editor from CS to CS5. Does anyone here have any idea? TIA!

In iPhoto's General Preferences use that menu to select CS again. That will let you navigate to the editor of your choice to select it. It's not very intuitive, is it?
This may be preaching to the choir but FWIW:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
OT

HT1918 I need to change my payment method from credit card to bank checking account, how do i do that. When you go to settings on iphone it only has cedit card options. need to do this quick my payment is do Monday 2-24-2014. Thank you.

I need to change my payment method from credit card to bank checking account, how do i do that with my iphone. the only options when you go to settings is credit card, I want you to debit my checking account. I need to know asap, my payment is due this Monday 2-24-2014. Thank you

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
The payment methods that are available in your country will show on your account. If debit cards aren't available on that screen then you won't be able to use it as your payment method.

Navigate to external URL from secured APEX server

NOTE I am using the internal Oracle APEX server to host my application, so it may be possible that you will have to be an Oracle employee with the same access, or using a similar setup, in order to respond. Even if you are not, if you feel inclined to "take a swing" at it, keep this in mind.
Hi all,
I am using the internal APEX server at oracle to host an application (Application Express 4.0.2.00.07). I have other, NON-APEX applications hosted on other servers within the Oracle firewall.
On page 0 of the APEX application (which, as you may know, usually displays as the "header" section of every other page in the application) I have created a select list of the other projects and their associated URLs as well as a "Go" button, so users that want to navigate to the other applications can do so from this application. Since page 0 does not seem to allow the creation of standard branch items (please correct me otherwise), I have created a process on that page triggered by the "Go" button. The process currently contains the following code:
begin
apex_application.g_unrecoverable_error := true;
htp.p('<script language="JavaScript">
window.open (:P0_PRODUCT_PAGES); 
</script>');
end;
That code currently replaces the existing page with a blank page and the associated URL is "https://apex.oraclecorp.com/pls/apex/wwv_flow.accept". I am assuming this means that APEX was looking for an application ID and/or page and did not get it so it "stopped" at this page.
I am unaware if there are any settings on the APEX server, DB,or associated web server preventing me from navigating outside of APEX once I am running the hosted application.
I would like to launch another properly-sized (default) browser window rather than replace the existing window pointing to the URL for the selected application.
I have also tried using the owa.util code to try to generate the proper URL but was likewise unsuccessful.
NOTE: I am not looking for different ways to do this by changing server parameters, settings, etc. since I do not have server rights to do this. Additionally, due to time constraints, I would prefer not to be drawn in to a discussion of the comparisons and/or benefits of owa.util or javascript over the other for navigating to an external URL from within APEX, etc. (I'm not trying to be a "punk", but I AM under the gun to resolve this with very limited time). In light of this, please indicate if you have a working option to do this under similar conditions that I can implement quickly. I have done much research within the forums and Googled extensively for information from outside sources but have not yet found something that will provide the proper results.
If you are an oracle employee and wish to contact me directly, please email me at [email protected]
Crossing my fingers and hoping someone has done this before.
Many thanks in advance; your useful contribution will actually contribute to lessening the world's INSOMINA factor considerably (mostly mine). ;)

>
I would like to launch another properly-sized (default) browser window rather than replace the existing window pointing to the URL for the selected application.
I have also tried using the owa.util code to try to generate the proper URL but was likewise unsuccessful.
>
Opening a URL in a new tab or window has to happen in the browser, without submitting the page. The server doesn't know about browser windows. Use:
onchange="window.open(this.value);" in the HTML Form Element Attributes property of <tt>P0_PRODUCT_PAGES</tt> (making the "Go" button unnecessary), or, if the "Go" button is required to match the LAF:
onclick="window.open($v('P0_PRODUCT_PAGES'));"in the button Attributes property, ensuring the button is a template button including the <tt>#BUTTON_ATTRIBUTES#</tt> substitution string, e.g.
<input type="button" value="#LABEL#" #BUTTON_ATTRIBUTES# />Ensure that absolute URLs are used in the <tt>P0_PRODUCT_PAGES</tt> where necessary, specifying the correct scheme for the site, so that you are not trying to go to <tt>{noformat}https://apex.oraclecorp.com/pls/apex/www.google.com{noformat}</tt> for example:
f?FOO:BAR:&APP_SESSION. // other APEX app hosted on apex.oraclecorp.com sharing the same authentication scheme
https://foo.oraclecorp.com // other secured internal site
http://www.google.com // unsecured external site

External requirement from non SAP system created in SRM 7.0 Extended Classi

Hello SRM Gurus:
Has anyone created an external requirement using XI ExternalRequirement_Create_In (http://sap.com/xi/EBP). We are getting a E001 "No company code could be determined for backend for product##". I traced the error to FM 'BAPI_SCEC_CREATE' in class "CL_BBPX_EXTERNAL_REQUIREMENT". What I found is that it check the attributes for BUK and updates a table with the backend EEC system. Then it checks if any of the entries match our external non SAP system in our external requirement and since it is a non SAP system none do. Then it sets a return error code.
I configured our non SAP system in the SLD and in SPRO under "Define System Landscape" as a non SAP system.
We are running external classic scenario. We just want to created a shopping cart from an external non SAP system. Source the shopping cart in SRM and create the PO in SRM/ECC. We are not using a product master but creating "describe requirement" in our external system. Our product categories are replicated from ECC and the same codes used in our external non SAP planning system.
If I change the external planning system to the ECC backend system, the external requirement is created in SRM but when I source it and convert it to a PO, it returns a backend error that the external requirement number does not exist in ECC. Therefore it appears all of our data from our external system is correct with the exception of how to deternine the backend company code
According to SAP this should be possible using XI.
Has anyone been successful doing this or can you please advise any OSS notes or documentation explaining how to do this. Please advise if you need additikonal info.
Thanks in advance.
Bert

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

HT1766 HOW CAN I CHANGE MY BACKUP FOLDER FROM THE C DRIVE TO ANOTHER?????

HOW CAN I CHANGE MY BACKUP FOLDER FROM THE C DRIVE TO ANOTHER????? because my c drive in the windows computer gets filled and i need to back up my ipod to a portable hard disk.. bt i dont know how to do it.. plz help

you can't change the backup folder as far as I know, but you can choose to move backups. The information you need can be found in this article: http://support.apple.com/kb/ht4946
Where iTunes backups are stored on your computer
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.
Hope this helps
Regards,
Stijn

How to call Operating System commands / external programs from within APEX

Hi,
Can someone please suggest how to call Operating Systems commands / external programs from within APEX?
E.g. say I need to run a SQL script on a particular database. SQL script, database name, userid & password everything is available in a table in Oracle. I want to build a utility in APEX where by when I click a button APEX should run the following
c:\oracle\bin\sqlplusw.exe userud/password@database @script_name.sql
Any pointers will be greatly appreciated.
Thanks & Regards,

Hi Guys,
I have reviewed the option of using scheduler and javascript and they do satisfy my requirements PARTIALLY. Any calls to operating system commands through these features will be made on the server where APEX is installed.
However, here what I am looking at is to call operating systems programs on client machine. For example in my APEX application I have constructed the following strings of commands that needs to be run to execute a change request.
sqlplusw.exe user/password@database @script1.sql
sqlplusw.exe user/password@database @script2.sql
sqlplusw.exe user/password@database @script3.sql
sqlplusw.exe user/password@database @script4.sql
What I want is to have a button/link on the APEX screen along with these lines so that when I click that link/button this entire line of command gets executed in the same way it would get executed if I copy and paste this command in the command window of windows.
Believe me, if I am able to achieve what I intend to do, it is going to save a lot of our DBAs time and effort.
Any help will be greatly appreciated.
Thanks & Regards,

Essbase server - automatic change of substitution variable from SQL

Hi,I would like to automaticaly change the substitution variable in Essbase Server. Is it posible to change the substitition variable from external source e.g. SQL statement?Simple sample:I would like to assign value "2003" to "CurYear" substitution variable. But value "2003" I would like to get from SQL:"select year(current date) from table".There are commands in Esscmd and MaxL Shell, see bellow.Esscmd command:CREATEVARIABLE "CurYear" "localhost" "" "" "2003";MaxL Shell:alter system set variable CurYear '2003';Is it possible to get the value '2003' from SQL and pass this value to Esscmd command or MaxL Shell?My system:Windows 2000 Professional Service pack 4Essbase at 6.5.3 levelThanks,Grofaty

You can create a text file from the SQL server that writes the command like"CREATEVARIABLE "CurrYear" "Servername" "AppName" "DBName" "2005";then you can create a schedule job that would run this script which can update the variable. CREATEVARIABLE creates/replaces the current variable.

Cant Access external shares from my admin account

Hi,
the title says it all.
No matter if I try to connect via smb or afp. If I try to log in from the admin account to external afp or smb shares the login is refused cause of permissions.
IF I do switch to a user other than the system admin account, the access to external shares works like a charm.
In my case its an external NAS from Buffalo (Linkstation Duo).
Also from other Lion machines ... no problem when trying to access that share.
Im aware of the DHCAST128 changes but as you can read above it seems that this is not the issue.
Any hints or suggentions?
Thanks!
Andrew

Hi-
You can use the account that you use daily, as SuperDuper will clone the entire drive, which includes all accounts, applications and data. SD will require an administrator password to run the cloning, but this can be done from any account.

Changing Internal & External URLs?

We run split DNS so right now for all services the internal and external Exchange 2010 URLs are simply set to mail.domain1.com.
If I change them to mail.domain2.net, assuming there is a valid cert on the Exchange box for mail.domain2.net, and assuming that split DNS points mail.domain2.net to the internal/external IP of the Exchange box, new clients should pick up the new domain.
What happens to existing clients i.e. Outlook and ActiveSync?
Will they continue to use mail.domain1.com until the account is removed and added again, or do they do a periodic refresh/update/poll of which setting to use?
In particular would the URL used by Outlook Anywhere be updated on the client automatically?
This topic first appeared in the Spiceworks Community

Hi,
For the migration from the Exchange 2007 to Exchange 2013, we need change the external URLs with the new Exchange 2007 host name legacy.domain.com and migrate all mailboxes including public folders.
For more information about the migration, you can refer to the following articles:
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-3-step-by-step-exchange-2007-to-2013-migration.aspx
http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-4-step-by-step-exchange-2007-to-2013-migration.aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Quick change of external HD from AEBS to firewire?

Similar Messages

Maybe you are looking for