Quick control and Autoreview problems

Hi all,
I have been loving my rebel t5i for the past several months, but have just started having a weird problem with the quick control screen and the autoreview features. It's strange, but when I push the Q button while in viewfinder mode, it doesn't pull up the quick control screen any more. However, the Q button works fine on image review and while in live view mode. Also, after taking a photo, the image no longer pops up for view automatically, though it pops up just fine when I push the review button.
Anyone else dealt with this problem? Since the button appears to be fine and the LCD is fine, I can only think of the accelerometer as a problem since I think this controls both of these. Any other thoughts or advice? The camera is only 3 months old and I got it through the ritz camera amazon store.
Thanks

One last thought.
On some cameras, there is a little sensor near/above the eye cup called the Display Off Sensor. Yours has one. It senses when you have the camera up to your face. It shuts the LCD off. Sometimes the little thing gets dirt, makeup over it, or padded eyecup slips and covers it, or the camera strap covers it while on tripod sideways, and it thinks you have the camera up to your face, and the LCD shuts off.
See if maybe that could be it? Clean the little sensor, then enable (un disable? Re-enable?) the display shutoff you disabled. It might work.
Scott
Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
Why do so many people say "fer-tographer"? Do they take "fertographs"?

Similar Messages

Quick view and preview problems

After upgrading to Mountain Lion, I've experienced consistent problems with quick view and the preview image on column view. I always browse the Finder in column view, so for instance, if I were to browse through a folder of photos, instead of seeing a thumbnail image in the far right column, there is blank white space. If I resize the window, the thumbnail appears. Also, if I were to hit the space bar for quick view, only a white image will appear. Closing it and reopening it will correct the problem. This happens every time. The problem started when upgrading to OS X 10.8 from 10.6.8, and it persists after the 10.8.1 update. Computer is an early 2009 iMac, 2.93 GHz, GT 120 video card. Anyone seen something similar? I haven't been able to find anyone else with the problem.

I have the exact same problem and it's frustrating. I thought it was only when I double-clicked an attachment jpeg from Entourage, but it happens with all images from any source.
I've removed the plist on several occasions too, and it works fine for a while. I can't pin down when it decides to stop working again, but it does after a few image views.
It's only happened since the Snow Leopard installation. I'm up to date with all Apple updates.

EP 6.0 SP2 KM Access control and version problems

Hi,
We have installed EP 6.0 SP2 and have configured KM. We have created a File system repository pointing to a shared folder in the local drive. Now, we are facing the following 2 problems:
1. Access Control for Resources (folders and files) are not working..i.e, even though, we have given 'Read' access to a particular folder for a given portal user, he is still able to delete, rename, etc. How do we tackle this? Is there any property to be set for ACL to work.
ACL Manager Cache : ca_rsrc_acl
Security Manager : AclSecurityManager
are used for this particular file system repository.
2. For the very same file system repository, we are not able to get the option 'versioning' for any of the folders. while for other folders in Content Management (CM) repository, 'versioning' property appears. Why is this so? Is there any setting to be done for the property 'versioning' to appear for a file system repository?
Any help in this regard is highly appreciated.
Thanks in advance,
Pavithra

Hi,
Thanks so much for the quick response. It was quite helpful. The problem is that while trying to set up W2Ksecurity manager, the system component monitor shows the following error:
Startup Error: Exception during start up of sub-manager: The W2kSecurityManager can only be run under Windows 2000 operating systems.
Portal server is installed on Microsoft Windows 2003 server. But the file system repository is mapped to a shared drive whose host machine runs Microsoft windows 2000 professional.
My Questions:
1. Do I have to have Microsoft Windows 2000 ONLY for portal installation.
2. Can I not have a shared folder mapped to another local machine's directory
3. Also, Any ideas on whats the max length of file path for KM..Because, its likely that the file path length may extend to more than 200 characters..
Please help me in this regard.
Thanks in advance.
Pavithra

Mission Control and Expose Problems

All of a sudden my mission control gestures have stopped working. Three fingers up did expose all the windows, but not all the desktops. After restarting my computer, the three fingers up or down doesn't work at all, and the launchpad doesn't make the background disappear as it used to. I tried multiple ways of fixing the issue, including turning all the gestures off and restarting and turning them all back on. Can anyone help me fix this? It is a real pain. Also, three fingers side to side still switches between the desktops.

Four fingers does bring me to mission control, but there is no bar at the top that shows the desktops that I have made. Also, sometimes it glitches and all the windows disappear for a few seconds until I go back and forth across all the desktops a few times. I remember when I went into launchpad before the windows I was working on would fade away, and they don't do that anymore either.

I just rented a film using my apple TV and was then asked to enter a code - which I haven't been asked for in long time. I have forgotten the code. Any quick solutions to the problem?

I just rented a film using my apple TV and was then asked to enter a code - which I haven't been asked for in long time. I have forgotten the code. Any quick solutions to the problem?

Hello anetsa
It sounds like you have restrictions setup on your Apple TV. If you do not know your passcode to unlock it, then you will need to restore your Apple TV. Check out the articles below for more information about Restrictions as well as restoring your Apple TV.
Apple TV: Understanding Restrictions (parental controls)
http://support.apple.com/kb/HT200198
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/HT4367
Regards,
-Norm G.

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Problem with custom control and focus

I've a problem with the focus in a custom control that contains a TextField and some custom nodes.
If i create a form with some of these custom controls i'm not able to navigate through these fields by using the TAB key.
I've implemented a KeyEvent listener on the custom control and was able to grab the focus and forward it to the embedded TextField by calling requestFocus() on the TextField but the problem is that the TextField won't get rid of the focus anymore. Means if i press TAB the first embedded TextField will get the focus, after pressing TAB again the embedded TextField in the next custom control will get the focus AND the former focused TextField still got the focus!?
So i'm not able to remove the focus from an embeded TextField.
Any idea how to do this ?

Here you go, it contains the control, skin and behavior of the custom control, the css file and a test file that shows the problem...
control:
import javafx.scene.control.Control;
import javafx.scene.control.TextField;
public class TestInput extends Control {
    private static final String DEFAULT_STYLE_CLASS = "test-input";
    private TextField           textField;
    private int                 id;
    public TestInput(final int ID) {
        super();
        id = ID;
        textField = new TextField();
        init();
    private void init() {
        getStyleClass().add(DEFAULT_STYLE_CLASS);
    public TextField getTextField() {
        return textField;
    @Override protected String getUserAgentStylesheet() {
            return getClass().getResource("testinput.css").toExternalForm();
    @Override public String toString() {
        return "TestInput" + id + ": " + super.toString();
}skin:
import com.sun.javafx.scene.control.skin.SkinBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.control.TextField;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputSkin extends SkinBase<TestInput, TestInputBehavior> {
    private TestInput control;
    private TextField textField;
    private boolean   initialized;
    public TestInputSkin(final TestInput CONTROL) {
        super(CONTROL, new TestInputBehavior(CONTROL));
        control     = CONTROL;
        textField   = control.getTextField();
        initialized = false;
        init();
    private void init() {
        initialized = true;
        paint();
    public final void paint() {
        if (!initialized) {
            init();
        getChildren().clear();
        getChildren().addAll(textField);
    @Override public final TestInput getSkinnable() {
        return control;
    @Override public final void dispose() {
        control = null;
}behavior:
import com.sun.javafx.scene.control.behavior.BehaviorBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputBehavior extends BehaviorBase<TestInput> {
    private TestInput control;
    public TestInputBehavior(final TestInput CONTROL) {
        super(CONTROL);
        control = CONTROL;
        control.getTextField().addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler<KeyEvent>() {
            @Override public void handle(final KeyEvent EVENT) {
                if (KeyEvent.KEY_PRESSED.equals(EVENT.getEventType())) {
                    keyPressed(EVENT);
        control.focusedProperty().addListener(new ChangeListener<Boolean>() {
            @Override public void changed(ObservableValue<? extends Boolean> ov, Boolean wasFocused, Boolean isFocused) {
                if (isFocused) { isFocused(); } else { lostFocus(); }
    public void isFocused() {
        System.out.println(control.toString() + " got focus");
        control.getTextField().requestFocus();
    public void lostFocus() {
        System.out.println(control.toString() + " lost focus");
    public void keyPressed(KeyEvent EVENT) {
        if (KeyCode.TAB.equals(EVENT.getCode())) {
            control.getScene().getFocusOwner().requestFocus();
}the css file:
.test-input {
    -fx-skin: "TestInputSkin";
}and finally the test app:
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.TextField;
import javafx.scene.layout.GridPane;
import javafx.stage.Stage;
public class Test extends Application {
    TestInput input1;
    TestInput input2;
    TestInput input3;
    TextField input4;
    TextField input5;
    TextField input6;
    Scene     scene;
    @Override public void start(final Stage STAGE) {
        setupStage(STAGE, setupScene());
    private Scene setupScene() {
        input1 = new TestInput(1);
        input2 = new TestInput(2);
        input3 = new TestInput(3);
        input4 = new TextField();
        input5 = new TextField();
        input6 = new TextField();
        GridPane pane = new GridPane();
        pane.add(input1, 1, 1);
        pane.add(input2, 1, 2);
        pane.add(input3, 1, 3);
        pane.add(input4, 2, 1);
        pane.add(input5, 2, 2);
        pane.add(input6, 2, 3);
        scene = new Scene(pane);
        return scene;
    private void setupStage(final Stage STAGE, final Scene SCENE) {
        STAGE.setTitle("Test");
        STAGE.setScene(SCENE);
        STAGE.show();
    public static void main(String[] args) {
        launch(args);
The test app shows three custom controls on the left column and three standard textfields on the right column. If you press TAB you will see what i mean...

Problem with remote control and Windows 7 - HP Pavilion 6301eu

I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

Can´t access my files on Creative Cloud. "Page temporarily unavailable. We will return soon." "We are working quickly to resolve the problem and apologize for the delay. Check back later or visit our website for status updates. In addition, you can get he

Hello,
For a few days I have been trying to access my files on Creative Cloud web without success. I´ve got this message only:
"Page temporarily unavailable. We will return soon."
"We are working quickly to resolve the problem and apologize for the delay.
Check back later or visit our website for status updates.
In addition, you can get help in the forums of the Creative Cloud.
Thank you for understanding!"
(I used Google Translate)
Somebody help?

You do not need ?&promoid=KRUVP at the end of the url but it should not matter.
One thing to check is if your hosts file is modified. Open the Command Prompt and type: notepad %systemroot%\system32\drivers\etc\hosts
This will open a read-only copy of your host file in Notepad. Are there any entries in this file regarding adobe.com?
The other thing you can do is open the Developer Tools in the Chrome browser. On Windows press Ctrl + Shift to open them. Switch to the Network tab. Reload the page by pressing Ctrl + r. Check for any 4xx or 5xx errors which should be colored red.
Post screenshots of your results or send me a private forum message with the information.

Problem in placing controls and indicator on imported pictures

hi.
i have a problem in placing controls and indicator on imported pictures on labview front pannel.
when i place a control or indicator on imported picture ..the control or indicator don't stay at the top of picture but go behind the picture...
kindly tell me what to do to avoid this....as complete project has been made and now i have to place all controls and indicator of front pannel on to a picture.

The Front Panel is built in layers. Each new control or decoration you add is placed in the top most layer.
To change this, select the picture, click the "Reorder" button (that's the rightmost button in the row of buttons on the toolbar, the one with the 2 arrows forming a circle), and select Move to Back. Your picture will be moved to the background and your controls will be in front of it.
Try to take over the world!

Problem with Quicktime controls and commands

I'm finding the best way to put a video together is to edit individual pieces with QT Pro. Problem is that it's pretty darned annoying because mouse and keyboard controls don't always work as they should.
Sometimes I'll press the space bar and instead of playing, the volume mutes/unmutes...there is a blue glow around the volume controls and until I click around and unlodge it somehow, it stays that way.
Other times, I'll click on the timeline and instead of the playhead moving to where I click, it will move forward a little bit....or it won't move at all.
And on top of that, I still haven't found solid documentation on when the playhead turns dark, as opposed to staying "hollow"...or whether or not that's relevant to the problem.
I've found plenty of resources that have shortcut keys listed, some of them "undocumented." But I feel as if I'm missing something...is there anything I can do to avoid these problems, or at least is there a rhyme or reason as to how they happen?
Thanks.

Play/Pause Space bar
Play or pause all movies Command-Return
Play movie backward Shift-double-click Command-Left Arrow
Stop playback and go back one frame Left Arrow
Stop playback and go forward one frame Right Arrow
Go to beginning of selection or movie Option-Left Arrow
Go to end of selection or movie Option-Right Arrow
Turn volume up Up Arrow
Turn volume down Down Arrow
Turn volume up to maximum level Option-Up Arrow
Turn volume down to minimum level Option-Down Arrow
Enter full-screen mode Command-F
Exit full-screen mode Command-period or Esc
QuickTime Pro keyboard shortcuts
Play movie at half size Command-0
Play movie at normal size Command-1
Play movie at double size Command-2
Play movie at full size Command-3
Move In marker to playhead location i key
Move Out marker to playhead location o key
Extend selection to the left Option-Shift-Left Arrow
Extend selection to the right Option-Shift-Right Arrow
Extend selection to the point clicked in LCD Shift-click
Letters j, k and l keys can be used for "scrubbing":
k equals "pause"
j equals "reverse" playback. Tap two times to go "double" speed. Tap three times for "triple" speed.
l equals "forward" playback. Tap twice for double speed. Three times for triple speed.

Did all the updates that Apple requested in my 64 GB IPOD and the battery continues discharging very quickly. When this problem will be solved, because before these updates were downloading not the battery so quickly. Did we revive the Steve Jobs to resol

Did all the updates that Apple requested in my 64 GB IPOD and the battery continues discharging very quickly. When this problem will be solved, because before these updates were downloading not the battery so quickly. Did we revive the Steve Jobs to resolve the problem, because each update only worsens the operation. I look forward to a quick, effective and definitive solution. Thank You. Ester

Did all the updates that Apple requested in my 64 GB IPOD and the battery continues discharging very quickly. When this problem will be solved, because before these updates were downloading not the battery so quickly. Did we revive the Steve Jobs to resolve the problem, because each update only worsens the operation. I look forward to a quick, effective and definitive solution. Thank You. Ester

Problems with bill copying control and materials with variant configuration

Hi experts,
I have a problem with a bill copying control and the way that my customer is trying to create and print the Bill (VF01).
Let me explain...They have in a Sales Order a material with variant configuration per position, each one can have many characteristics. This characteristics must be printing on the billing document, creating different bills 'coz the max. lines number is 18, so the bill must change page per material-characteristics.
Example:
Max. Number Lines = 3
Position 10
Material A
     -Characteristic A
     -Characteristic B
     -Characteristic C     (Bill 1)
     -Characteristic D
     -Characteristic E
     -Characteristic F     (Bill 2)
Position 20
Material B
     -Characteristic A     (Bill 3) counting characteristics upside
     -Characteristic B
     -Characteristic C
     -Characteristic D     (Bill 4)
I created on Tx VOFM (Data Transfer-Billing documents) a routine trying to control this jump, but my problem is when I'm creating the Bill document (VF01) this work only by position, the debugging enter per position.. so I don't have any control to tell the program must count the characteristics and create another bill.
So... Somebody can help me..or have any idea to solve this problem.....
Thxs a lot!!!!
Diego Helfer

HI Diego
For our coming assignment, we do have similar sort of situation. Currently we are in Requirements Gathering phase.
Though we do not have Variant Configuration in place, we do have restriction for no..of items to be used for printing in Billing Documents.
Current proposal is that we will restrict at Sales Order Creation. If the number of items are increasing, we will restrict saving the document and loading has to be done again. As itz better to restrict at initial phase.
Our schema is One Sales Order -> One Delivery -> One Billig Document.
   Will post if we can manage to acheive some other way and do request you the same.
Kind Regards
Eswar

Windows Keboard and Booting Problem (on a Mac laptop)

Hi, I've been putting up with a really strange (and annoying) problem that my laptop has been going through. I have a Santa Rosa MacBook Pro with OS Leopard, and I put on a Windows XP Pro (with Service Pack 2) NTFS partition. It used to work fast at first--especially booting up and logging on. I have noticed that now when I log onto Windows (no other user accounts , just mine) the wallpaper, desktop, desktop icons, start bar, all load. But when I click on My Computer it takes a good minute and a half for all the components to be displayed (like C drive , the CD drive, Shared Documents). I only have one partition which is C drive. But for a minute and a half, the flashlight icon keeps moving back and forth. Even if I click on any icon, the cursor will turn into a sandtimer but no programs will open once all the drives show up in the My Computer window.
My initial theory was that maybe it's searching for My Documents which I shifted to one of my external harddrives. But that doesn;t seem to be it. When I log off and log back in, it loads much faster. I can open programs in 2 seconds. Also, I realized that the Apple keyboard features (which is controlling volume and brightness) works only then. If I had to boot up Windows, not only does it take long to load (although shutting down is pretty quick), the brightness and volume keys don't work. I have to set it manually through Control Panel. So now if I have to open up Windows, the ritual is that I sit around for a minute and a half (which is a very long time if u think about it) and just when it's working I force myself to log off (so the volume and brightness keys work once I log back on)
I suppose it's worth mentioning that I had downloaded this "skin" which makes XP look like Vista, but I uninstalled it now although not completely since it needed the Service Pack 2 CD which I don't have at the moment (I'm on vacation) . I would think that could be the problem, but then why does simply logging off and on make Windows work like a charm? Is it an update glitch? Has anyone had this problem before? Could somebody please help me since I'm really tired of waiting around or this stupid thing to load (not to mention hearing myself come up with stupid theories). This has been going on for 4 and half months now. Come to think of it it's been a while since I received any Bootcamp updates from Apple (unless they just haven't released any that could fix such a problem)
Just in case my specs are-- 2.4 GhZ, OS 10.5, nVIDIA GeForce 8600M GT, 15 inch display, 250 GB (of which 30 GB is for Windows).
I'll be waiting for any answers/suggestions/tips/solutions. Thanks so much in advance =)

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.] If possible please also try to rule out hardware / mouse settings issues.
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

Quick Control Wheel on my Canon 7D is not adjusting the aperture in M.

Quick Control Wheel on my Canon 7D is not adjusting the aperture or shutter speed in M. Tried changing it to operate on the Main Control Dial and both aperture and shutter will work independantly when I make change, but the Quick Control Wheel will not control either. Any ideas?
Solved!
Go to Solution.

Tripple check that the switch for the Quick Control wheel is ON. I had several instances where it was just a tiny bit out of the ON position with my 20D with similar issues. Flip it through the positions & back to ON & see if that cures the problem.
"A skill is developed through constant practice with a passion to improve, not bought."

Quick control and Autoreview problems

Similar Messages

Maybe you are looking for