Quick filter misses many matches. Why?

The Quick Filter is missing many matches, even for email created minutes before. Oddly, this only seems to be happening in "Sent" folders. Folders have 500 to 1000 messages. Inbox has many more and the quick filter does seem to work there. Quick filter misses matches in the body text only. Matches subject and other fields correctly. Does not miss all matches in the body ... older messages appear to be matched more often.
I tried normal search and it does find all the expected messages. I also tried rebuilding the global database with no change in behavior.
Any suggestions?
(Version 31.0 Windows 7 machine)

''Quick filter misses matches in the body text only.''
Has the message body been downloaded for those messages?

Similar Messages

  • Reinstalling Tiger: Software Update Missing Many Updates

    I've seen a few similar topics on this issue, but only in so far as Software Update missing an update here or an update there. I am currently reinstalling Tiger on a Power Macintosh G3 B&W that has been heavily upgraded. The system specs are as follows..
    1GHz PowerLogix G3 (using MAChSpeed to enable full processor speed since the included CPU Director software won't work in 10.4.11)
    1GB of RAM
    128MB Radeon 9200 Graphics card connected to an LG 1952 display and set to 1440x900 / millions of colors
    I'd go on, but the remainder of the hardware upgrades should have no effect on Software Update to the best of my knowledge. Previously I had this machine running 10.4.11, and through the Software Update program I had installed all of the recommended updates, which included numerous security updates, Safari 4.0.3, and iTunes 8.2.1. Everything was running perfectly smoothly, but after having tested several software configurations and having decided on one in particular, I set out to reinstall Tiger from scratch in order to keep things as clean as possible. I've tried several different times now with the same results each time. Once the system is up and running, regardless of whether or not I install MAChSpeed before or after running Software Update, Software Update simply does not provided all of the updates that I believe are actually there. It did see and did allow me to install the following updates..
    10.4.11 Combo update (I installed this one separately before any other updates)
    Java 1.3.1 and 1.4.2 Release 2
    iTunes Phone Driver 1.0
    Migration and DVD/CD Sharing Update
    Quicktime 7.6.4
    Security Update 2009-005 (PPC)
    J2SE 5.0 Release 4
    Java for Mac OS X 10.4, release 5
    [ditto], release 6
    [ditto], release 7
    [ditto], release 8
    [ditto], release 9
    Unless Security Update 2009-005 is meant to be a combined security update (doubtful), there are obviously several security updates that are missing. Also, I'm surprised that Software Update saw and installed Quicktime 7.6.4 but didn't see or install the latest PPC versions of iTunes or Safari. Safari 4.0.3 as I understand requires Security Update 2009-002, so naturally it would not see or install Safari without that update being installed first. While I don't necessarily mind installing updates manually (downloading them individually off Apple's support site and then installing by hand), I really prefer using Software Update to better automate the process. Up until now I have never had any problems with Software Update, but this problem is certainly aggravating. My primary concern is that I have no idea what updates are necessary and what updates are not necessary to ensure proper and relatively secure operation of my system, and I have no way of knowing whether or not Software Update will see any future updates (provided that Apple continues to support Tiger for a little while longer). If Software Update is missing crucial updates out of the gate, how can I be sure that it will see any further crucial updates that may hopefully be released?
    I know that's part question / part rant, but I've been wracking my brain for the past few days over this one. Any information that could help solve this problem will definitely be appreciated, especially since my B&W is my preferred browsing machine.
    Incidentally, my iBook, a Clamshell FW SE, is currently running the same setup that my B&W was previously running.. 10.4.11 with Quicktime 7.6.4, iTunes 8.2.1, and Safari 4.0.3, so as far as I can tell, this shouldn't be hardware related (my iBook is far less powerful than my B&W currently is). Also, a cursory glance at the Installed Updates list on my iBook definitely shows that my Software Update on my B&W is missing many updates.

    I reformatted the drive first and did a clean install. I'm currently in the process of downloading the standalone installers for Safari 4.0.3 and iTunes 8.2.1. It's looking like that's the solution at present, but I'm still curious as to why Software Update won't see any iTunes or Safari updates within the current system configuration's capabilities (speaking to both apps possibly being cumulative). I can't see Software Update simply not having those updates because there is newer version out, if indeed they are cumulative, since that would mean that anyone reinstalling or upgrading on an older machine would be forced to perform some of the updates manually where not too long ago they would have been able to simply use Software Update as a "one stop" solution.
    Oh well, maybe I'm just being too picky . I've had to deal with running around in circles to find software updates for manual installs for years with Windows systems, and Apple's "one stop" Software Update system was a wonderful, welcome change to that.

  • Call filter missing in 925

    yesterday i bought 925 and a feature was missing in this device was call and sms filter. i dont know why nokia forgot to add this feature in 925 when it is available in Amber.
    Solved!
    Go to Solution.

    I could down load from the qr code.
    But not at all happy with the features.
    Should be comparable to Melon Mobile's Advanced Call Manager.
    Should be able to block all incoming calls too, as well as specific nos. or full contact lists etc. with reply By SMS / greeting feature.
    Else purpose of call filter is defeated. Imagine when we are out of country or sick or so, and can't take calls.
    The caller should get some response / infomation why call is not picked up etc.
    For all these fatures I am still using my Nokia E 90 which will run melon mobile's Advanced call Manager. See www.melonmobile.com.
    NOKIA should develop such an APPLICATION.
    Jacob Kalrickal Luke

  • Video Filter Missing: AE

    I keep getting a series of messages saying Video Filter Missing: AE.ADBE MagicBulletMojo as well as a string of various messages after "Video Filter Missing: AE...." I was wondering if the "AE" in that message meant that it was coming directly from a plugin within After Effects. I am trying to track down exactly why this is happening in my particular project if it was from something within After Effects or from Premiere.
    I know that I have seen similar error messages with "Video Filter Missing: PR...." in other forums. So my biggest question is:
    Does the AE or PR in the middle of the error correspond with the application that I was using the video filter in that is now missing?
    Thanks!

    Placed the afx cs4 Fast_Blur.plugin on /Applications/Adobe Premiere Pro CS4/Adobe Premiere Pro CS4.app/Contents/Frameworks/MediaCoreUI.framework/Fast_Blur.pluginand nothing... ignored as when placing it on Plug-Ins folder...
    Where is this mediacore folder on win?
    Thanks for the suggestion, but I think that the Mac CS4 afx "Fast_Blur.plugin" isn't comptible with the Mac CS4 Premiere.
    I don't own a CS3 mac version... does anyone knows if it has the fast blur? I could try to use that file...

  • Video Filter missing:  AE.ADBE AEMask

    How can I fix this error: Video Filter missing:  AE.ADBE AEMask ? I used so many of the CC 2014 effects with masks and now they are shown as offline.

    Hi Bdrummer67,
    Sorry that didnt work. At this point, you might want to start a case with support. Here's the link: Contact Customer Care
    Please let us know the results.
    Thanks,
    Kevin

  • Video Filter missing:  AE.ADBE FC PRO 2.1    Help me..

    i got a problem. " Video Filter missing:  AE.ADBE FC PRO 2.1 "
    whenever i turn on premier pro, i see this sentence.
    Please help me...
    actually i tried to install film convert pro on my new computer but it doesn't work. I know FC PRO is film convert.
    but it is installed on after effect. not premier pro..
    can you help me ?
    i'm desperate T_T

    I removed FC plugin. and reinstalled. but it doesn't work.
    actually i want to use FC plug in but it's not working on premier pro..
    ......i don't know why.. because it was working well on my last computer.

  • OLAP universe filter with pattern matching.

    Hi,
    I tried to create both a qaaws and a webi report which contained a filter with pattern matching on an olap universe .  When I ran this it took too long to be usable. I found note 1500666 which says that pattern matching is not supported in MDX and to use BEX query variables instead.
    I have created a bex query with a variable which has "Variable Represents" set to "Selection Option". I can run this query and using the search option I can do a pattern match search. I have built a universe based on this query but the filter that gets created automatically in the universe uses a "Between" operator.
    Does anyone know if it is possible to change the definition of the filter in the  universe so that it does a pattern match search and if so how?
    The end result is that I would like to be able to do a pattern match search on the text description of a BW employee object.
    Thanks
    Quentin.

    It would be better if you post the Filter definition here...
    And why don't you do Pattern matching at BO query panel level??
    Where you can find Matches pattern operator to do same stuff.
    Thank You!!

  • When i plug in my ipod to my PC it makes a sound like it doesnt accept it. on the ipod, it says connect to itunes because it was disabled many times. why wont it connect?P.S I know nothing about this kind of stuff

    when i plug in my ipod to my PC it makes a sound like it doesnt accept it. on the ipod, it says connect to itunes because it was disabled many times. why wont it connect?P.S I know nothing about this kind of stuff

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Audio Filter missing:  Internal Volume Stereo - corrupt project?

    Hi,
    I am getting this error when I open my project. In addition, no media will play in the project either in the sequence window or the source window.
    It all appears and will scrub (with no audio), but will not play.
    I dug around a bit and I found that there is a known bug with audio from XML's and that is what I am using (convinced my client to migrate from FCP to Premiere - please don't tell me I made a mistake).
    Everything worked brilliantly for a week, including the addition of audio filters, and then all of a sudden - bang. No more.
    I have painstakingly deleted every audio filter and I am still getting this error. I have also tried a re-install.
    Another oddity is that when I try to quit Premiere, it will not quit all the way without a force quit!
    I'm running CC 2014 on a brand new mac pro.
    Desperate,
    dw

    Steve and Bill,
    I follow your advice, but it did not solve the problem. It is true  that  problems began when I used ZOOM recorder at 98kHz/24 bit in my current project (I already changed ZOOM mode to 48kHz/16 bit), but could this be just a coincidence?
    In the meantime I checked the rest of my 16 projects (.prel), which were fine before. To my surprise I found that although all of them were made using EXACTLY the same method, some of them are still OK, but most I can not Playback. The messages appearing are of three types:
    1. "Audio Filter missing: Internal Balance".
    2. "Audio Filter missing: Internal Volume Stereo".
    3. "This type of file is not supported or required codec is not installed".
    In one case, when I opened a project the first time, the message was "This type of file is not supported or required codec is not installed", but when I opened it second time it said " Audio Filter missing:Internal Volume Stereo". It seems to be random.
    Some projects can be opened, but when I try to Playback  there is no sound.
    I am completly lost. Please help.
    Andrew

  • HT204380 i cant receive my Face Time Notification i only see the missed call afterwards  why is this?

    i cant receive my Face Time Notification i only see the missed call afterwards  why is this?

    If it wasn't purchased in the Middle East, try checking Settings, then General, the Restrictions and make sure FaceTime is not turned off. Also, you know that FaceTime does not have its own application, but is accessed from the Contacts application, right?

  • Video Filter missing: AE.keylight 906?

    Hi,
    I am a complete noob when it comes to editing video in Adobe. I've been looking for a solution to my problem in other places, but my attempts were futile.
    Here's what I did:
    I edited a video clip in Adobe After Effects, dealt with the green screen using Keylight, then exported my work as an Adobe Premiere Pro Project. Once that was done, I tried opening the project in Premiere and a window popped up saying "Video Filter missing: AE.keylight 906." I clicked OK and found that Premiere does not show my edited green screen. It merely shows the original - I think I'm right in saying that is because the video filter is missing, as the message stated. How do I fix this? Help please!
    Thank you for your time.
    MP

    My guess for the choppiness would be that you used the default uncompressed render settings from After Effects; this likely made a very large file that, unless you have a really stout and fast hard drive setup (e.g. RAID), you will not get real time playback. Uncompressed is good in that, well, it's uncompressed and therefore doesn't add any further image degradation, but it can make for a lousy editing experience, as you've found.
    Depending on what your source footage is (you didn't mention this originally), and what your intended destination/delivery format is, you might be able to use different render/export settings from After Effects for a more playable file in Premiere. Later, you could rerender the composition to the uncompressed version and replace the original; this will give you better performance for further editing in Premiere, and then later will give you higher quality output. This is often referred to as proxy editing, and there are a couple of ways you can go about this, if it's something you want to attempt.
    Regarding the loss of edits when moving from Premiere: there shouldn't be any loss of edit points, necessarily, but what you might be thinking of is the loss of transitions. Since Premiere Pro works with tracks and After Effects works with layers, the two programs have different methods of representing and creating transitions (e.g. dissolves). In Premiere, you can put two clips next to each other in the sequence on a single track, and add a dissolve between them; however, in After Effects, a layer can only contain one footage item, so to create a transition between two layers, they must overlap. There are analogs for certain transitions--a dissolve, for example, is just a change in opacity of one layer that is over another--but other more "fancy" transitions must be recreated more manually. In short, you shouldn't have to worry about the timing of your edit in Premiere changing when moving to After Effects, whether you use Dynamic Link or whether you simply copy and paste from Premiere into AE.
    Hope that helps a bit more. And Mr. Brougham is my dad's name

  • Hi! I've just backed up from iCloud and missed photo. Why?

    Hi! I've just backed up from iCloud and missed photo. Why?

    What do yo mean that it took all the money?
    What is current status of the iPod?
    You can always redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Filter option in Matching Fields

    Hi,
    When right click on Matching fields, there is Filter in import Manager. Can anyone let me know, how that Filter related to Matching Fields records please?
    Thanks.
    Regards,
    Lahari

    Hi Lahari,
    Filtering narrows down both the source and destination record sets, but with slightly different effects, as follows:
    Source Side i.e. In Match records tab narrows down the set of source records so that those that do not meet the filtering criteria can be excluded from the import.
    Destination i.e. In matching fields tab narrows down the set of destination records, excluding those that do not meet the filtering criteria from record matching.
    The filter is inclusive, and expands the set of records on which you can perform import operations to those that do meet the filtering criteria.
    For more information please refer to the below link
    [http://help.sap.com/saphelp_mdm550/helpdata/en/43/12036df94c3e92e10000000a1553f6/frameset.htm]
    Go to Matching Records -> Records Matching Operations -> Setting the Record Filtering Criteria
    Regards,
    Jitesh Talreja

  • Since I have iTunes match, why does my iTunes library not appear in iPhoto music options for slideshow?; only songs purchased or placed on iTunes over a year ago appear in the iPhoto library under the iTunes or purchased option.

    since I have iTunes match, why does my iTunes library not appear in iPhoto music options for slideshow?; only songs purchased or placed on iTunes over a year ago appear in the iPhoto library under the iTunes or purchased option.

    10/20/14
    Yes, I am signed in to iTunes match on the macbook pro, iPhone , & iPad (all updated & correct music libraries) where I bought all the tunes but still no updated tunes on the iPhoto music library after 3 days of being on iTunes match.
    Thank you,
    TMAbanjoman

  • Since being in Mexico both my iPad and iPhone seem to be using up their batteries more quickly.  Any thoughts on why that might be?

    since being in Mexico both my iPad and iPhone seem to be using up their batteries more quickly.  Any thoughts on why that might be?

    Did they drink the water? 
    Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
    Use the wall-mount charger that came with the iPad or another 10W/12W Apple charger and, one at a time, charge both units overnight.  Do NOT use an iPod/iPhone (5W) charger.  Do NOT use a computer's USB port.  Then, operate it normally until auto shut-down (ignore any low level alerts that may appear).  An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
    I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know.  If the above test does, in fact, indicate a problem, read this.
    Also, according to Apple:
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

Maybe you are looking for