Quick find image by date

Is there a quick way of filtering by date without having to open the Filter HUD and use either Calandar or Date criteria; both of which are clunky?
(Often have to select date criteria to add to the HUD which takes even longer!!)
I want to be able to search the library for photos taken on a specific date by summoning a date entry box with a key combo, entering the date, (preferably in UK format), and pressing enter. If I had this I could then adapt MacSpeach to do it on verbal command!!!
I have tried searching this forum, (so forgive me if I have missed it), and also aple script forums.
Is anyone out there whizz kid enough to knock a script up to do this on the back of an envelope in a thousandth of the time it would take me to learn how to do that????
Failing the above, how do I keep "Date" in the filter HUD fields????
Many thanks
Rob M

René Mølsted wrote:
Hi all,
is it possible to find linked image by name, say find all images named 4535df55_lm.jpg?
There is Links collection in Document.
VisualBasic example:
For a=1 to myDoc.Links.Count
If myDoc.Links.Item(a).Name = "aaa.tif" Then
' do something
End If
Next
robin
www.adobescripts.co.uk

Similar Messages

Time machine: I get the following message: The backup disk image "/Volumes/Data-1/Clemens's iMac.sparsebundle" is already in use - what to do? Where and how do I find that file and get rid of it?

time machine: I get the following message: The backup disk image “/Volumes/Data-1/Clemens’s iMac.sparsebundle” is already in use - what to do? Where and how do I find that file and get rid of it?

I'm on Mountain Lion and have version 6.1 of AirPort utility so there is no button to "Disconnect All Users"and the only other option of "removing and re-selecting the drive via Time Machine Prefs" doesn't work either. So this will work.
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.The "Enable File Sharing" button seems to have replaced the "Disconnect All Users" button but with the slight disadvantage that it reboots the TC which takes up additional time.

How do I quick look up the date on a photo I have added to a photo project in iPhoto 11? If I hover long enough it sometimes appears.

There has to be a better and more efficient way to do this. This is quite frustrating. I separated all of my "chapters" for my book into different albums but then could only create the book from one of them. So, I took all the photos into an album and am now trying to separate chapters as I create them from scratch in my book project. That aside, it's been troublesome now as well as the past projects on how to quickly display the info (the date mainly) for the images included in the project menu on the right when I click "photos". I do get the info about 60-70% of the time by hovering for a quite lenghty period of time, but this is taking forever. Please.... quick solution! Thanks all!

Thanks Terence. I know about that in iPhoto already. I use it often. However, that is not an option when creating a book. When you click on the photos button in the bottom right corner when creating a book, it shows the photos but there is no "info" selection. The only way I find out the date is to drag the photo into the book, then go back and hover over the page number it was imported to and hope eventually the date shows up. If it's not the date for the chapter I wanted (as my chapters are divided by months), I then drag it back out and try again until I find a photo that does have that date. It's taken hours and is different from previous versions of iPhoto where I have created books before. This is iPhoto 11, trying to create a hard bound book.

The backup disk image "/Volumes/Data/Neil-MacBook Pro (171).sparsebundle" is already in use. error message. How do I fix? Ideas

"The backup disk image “/Volumes/Data/Neil-MacBook Pro (171).sparsebundle” is already in use"
OS X 10.8.1 (12B19)
" error message just started
Mountain Lion
OS X 10.8.1 (12B19)
MacBookPro 2.53 Corei5
All software update installed
Time Capsule : 1TB, 599 of 998GB used
What causes it?
How do you fix it?
How do you stop it happening again?
Any ideas please

Thanks for fast response.
I already tried C12, no luck. I did read C17, but that did not help either.
I agree that Apple should really spend a bit more time on ensuring this common problem is resolved more quickly
But where to do you sent this request to? Doesn't seem easy to find a person to send it to.
I dumped by corporate wIn-pc environment that I was forced to use for the past ...forever. Have been delighted with the Mac experience..... for 24 months..but these type of un-resolved matters with terse error messages reminds me of the bad old days.
I had the problem 2 weeks ago and solved it by "clicking about" after reading the forum Can't remember what i did though. V. V. V. frustrating when the Mac is a business tool. I don't want to be a mechanic, I want to be a driver.
Thanks again for your help

I can not find (see) the Data Control Accordion

Hello all,
I cannot find (see) the Data Control Accordion, I just installed the Jdeveloper 11g (Oracle JDeveloper 11g (11.1.1.2.0) - November 2009) from this link http://www.oracle.com/technology/software/products/jdev/htdocs/soft11.html
I started a new ADF BC application, but I cannot find the data control accordion to drag and drop the components I created in the application model. Is there anything I must do after installation (post installation), is there any libraries need to be installed? Please, I need a help to create my application, I’m totally stuck, many thanks for any help.
Kind regards,
Nabil

Shay Shmeltzer wrote:
Can you post an image of your screen so we can see how it looks like?
If you delete the JDeveloper\system11.1.1.2.36.55.36 directory - does your IDE get back to the right way of displaying the data control?Hello,
Many thanks for your reply, kindly find attached screenshots for the two installation of Jdeveloper 11g I have (release 1 & 2), it shows clearly that the “Data Control” is available for release 1, but not available for release 2, even we are talking about the same application!
Regarding the “JDeveloper\system11.1.1.2.36.55.36”, I’m not sure if I have it (attached a list of directories installed), I was not able to find it under my installation directory, therefore I can’t answer your question, but please advise if it could be the reason, how I may have it, do you think there is something wrong with the installation? I noticed that some persons having the same problem before me, so what was wrong, and how they solve it? I appreciate any help please, many thanks.
Regards,
Nabil
P.S. regarding the attached files, sorry I don't know how to attach files to my reply (you may email me at [email protected] so I can send you the screenshots through email, if you please), any help regarding that too will be appreciated.
Directory     Location
o.adf-faces-query-and-lov-dt.11.1.1.2.36.55.36     E:\Oracle11MW\Middleware\jdeveloper\jdev\unit-tests\system11.0.0.0.0
o.adfdt.swingcore.11.1.1.2.36.55.36     E:\Oracle11MW\Middleware\jdeveloper\jdev\unit-tests\system11.0.0.0.0
o.adfm.11.1.1.2.36.55.36
o.adfm.11.1.1.2.36.55.36
o.BC4J.11.1.1.2.36.55.36
o.bm.11.1.1.2.36.55.36
o.css.11.1.1.2.36.55.36
o.diagram.javadoc.11.1.1.2.36.55.36
o.dynamic.faces.11.1.1.2.36.55.36
o.ide.11.1.1.2.36.55.36
o.j2ee.11.1.1.2.36.55.36
o.jdeveloper.11.1.1.2.36.55.36
o.jdeveloper.esdk.11.1.1.2.36.55.36
o.struts.11.1.1.2.36.55.36
o.struts.adf.11.1.1.2.36.55.36
o.xsqldt-ide.11.1.1.2.36.55.36

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi ‏946 KB

Take a look at this document that discusses how to monitor IMAQ memory usage:
http://digital.ni.com/public.nsf/websearch/8C6E405861C60DE786256DB400755957
Hope this helps -
Julie

My back up failed and I get a messageTime Machine couldn't complete the backup to "TimeCap". The backup disk image "/Volumes/Data/Mary Fleming's MacBook Pro .sparsebundle" is already in use.

I noticed today that my last back-up was this a.m. and it has tried several times to back up since but I keep getting this message
Time Machine couldn’t complete the backup to “TimeCap”.
The backup disk image “/Volumes/Data/ MacBook Pro ."sparsebundle” is already in use.
I have never had this problem before and don't know what to do. I am not that great around computers so if anyone can help I would appreciate it. I did try to do some research but could not understand any of the content I read. I sure don't know what "sparsebundle" is and this is the first time I ever heard the term.
If anyone can help woold appreciate it.
I have Version 10.9.1

This is a standard issue..
Been around since LION but you missed out.. !! Well the old rule applies.. there are three types of Mac users.
1. The bugs have bitten you, and you have done the work arounds.
2. The bugs are biting you and you are now trying to find out what is going on.
3. The bugs will bite you. And in the meantime you laugh at everyone with problems and say it must be all their fault. Doesn't happen to my system.
You were simply in the last group.. now, with the wonders of mavericks to help, you got bit.
The solution is simple.. unplug the power cord from the TC .. count to 10.. power up the TC again.
No luck look at the more technical help.
C12 here. http://pondini.org/TM/Troubleshooting.html
Your naming might also be an issue if this continues to happen.. see C9.

HT3275 For the past several days, I have been getting this message during backups: Time Machine could not complete the back up. The backup disk image "Volumes/Data/iMac.sparsebundle" could not be accessed (error-1).

For the past several days, I have been getting this message during backups:
Time Machine could not complete the back up. The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1). When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.' In addition, I cannot access previous backups any longer.
Help?

See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
http://pondini.org/TM/Troubleshooting.html

HT3275 I'm receiving an error message that reads "The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

The Time Machine is not completing thte backup to my Time Capsule. I am receiving a message which reads "The backup disk image "/Volumes/Data/Mac Jet's iMAC.sparsebundle" is already in use." I cannot locate the source of the problem or what steps need to be taken to get the Time Capsule operating.

Hi, see if it shows here...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi ‏946 KB

got these vi's off ni site a while ago - see if they help
Attachments:
Memory_Monitor.zip ‏132 KB

Image copy to folder with name based on image creation date

Hi all,
I am new to Mac OS X and automator so I would like to know the following,
Is it possible to have an automated action that triggers when I attach my camera to USB, and who copies all images to a folder which is named according to the date when the image was created?
Example:
I attach my camera and it shows up as disk image named "NIKON D70" and the images are contained in subfolders "DCIM/100NCD70" (or actually in DCIM/*). I then want all images in these folders copied to my home directory in a subdirectory called something like "Pictures/D70/2007/20070605" where the year folder name and the date folder name should be according to current image creation date (which of course can be different for each image).
I have created a simple automation script that copies images from my camera to a folder named according to current date, but that's not good enough.
Anybody having any hints or ideas of how I can accomplish this?
Regards
Anders
Mac Pro, 2x2.66GHz, 5GB, ATI X1900 XT Mac OS X (10.4.9)

Open the AppleScript Editor in the /Applications/Utilities/ folder and run:
tell application "Finder"
repeat with this_file in (get files of window 1)
set the_date to creation date of this_file
set folder_name to ((year of the_date as string) & "-" & day of the_date & "-" & month of the_date)
try
make new folder in window 1 with properties {name:folder_name}
end try
move this_file to folder folder_name
end repeat
end tell
(75533)

Image-safe data not writing to new images ...

Hello, I am new to Zenworks Imaging, but I have lots of the pieces working
on our system. One bit that I don't understand is the Image-Safe Data, so
I'm wondering if someone can enlighten me. Here's our setup ...
SITUATION:
A school district with three primary servers:
- The big Novell 6.5 Server with eDirectory and the usual Novell goodness
installed.
- A second server with SUSE Linux OES 9, DNS, Groupwise 7, and Zenworks 7.
- A third server with SUSE Linux OES 9 and DHCP.
I am new, and these folks currently use Ghost - but now want to switch to
Zenworks Imaging. I successfully started all the Zenworks services on the
SUSE server, checked to make sure our Windows XP SP2 lab computers (already
registered in eDirectory) have the Zenworks client software (they do), and
enabled PXE image uploads and downloads for individual computers using
Console One. So far so good! The school district has a numbering scheme for
their workstations (all the computers are in the same NDS STATION container
and are named HSLAB01, HSLAB02, HSLAB03, etc). I used Ghost to install a
fresh image on a lab computer, changed the Image-Safe Data to HSLABxx, and
copied the image to the server. I didn't change any of the ZisWin mask
settings (they are all cleared and empty), nor did I clear the SID information.
PROBLEM:
When the computer finishes the imaging process and restarts, I always end
up with a computer named HSLABxx (instead of HSLAB01 or HSLAB02 or whatever
the Image-Safe Data should change on that computer). Except for this issue,
it seems like everything else (PXE startup, PXE imaging, etc) works fine
(although I could have other issues I'm not aware of).
TROUBLESHOOTING:
I have tried an increasingly confusing number of changes to the ZisWin
interface before imaging, including checking and unchecking the mask
options, clearing the SID information, etc. with no good results. There is
also one "wild card" in that the computers start up and log in as a Windows
Limited Account (and not an Administrator-level account). I was wondering
if the ZisWin and image-safe data writing requires an administrator-level
login (but from what I'm reading online, the image-safe data is written
before the Windows login). There is one other issue I can find - when I use
the "rpm -qa | grep novell-z" command at the console, there are no 7.0.1
files listed, so I think my Zenworks installation is only 7.0 (but I don't
want to change anything until I track down the likely source of this problem).
Any help would be greatly appreciated!
Thanks, Mike O'Reilly

On Thu, 15 Feb 2007 21:44:41 GMT, [email protected] wrote:
> Any help would be greatly appreciated!
ziswin is doing its job as a service if the image save data contains the
just imaged flag and will do its stuff before the user locks in an requires
a reboot after that. there was also a bug which should have been fixed in
the latest patches of 6.5
If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
Live BootCd and USB Disk from Mike Charles
http://forge.novell.com/modules/xfmod/project/?imagingx
eZie http://forge.novell.com/modules/xfmod/project/?ezie
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

I want to add image in column is it possible then how to add image in data base what data type we need to do

I want to add image in column is it possible then how to add image in data base what data type we need to give we required any casting please show me one example
jitendra

Hi again,
Several points that can help more:
1. If you are working with Dot.Net, then I highly recommend read the first link that you got! This is nice and simple coding. Another option is this link which is even better in my opinion:
http://www.dotnetgallery.com/kb/resource21-How-to-store-and-retrieve-images-from-SQL-server-database-using-aspnet.aspx
2. As i mention above both link use the column's type image. There are several other option of working with Files. In most of my applications architecture I find that it is better to use a column which let us use any type of file and not an image column.
In choosing the right column's type for your needs basically your fist question should be if if you want to store your data inside relational database environment or outside relational environment. It is a good idea to look for blogs on this issue. Next
if you chose to store your data inside then you need to chose the right column type according to your server version. I highly recommend to look for blogs on the differences between those column's types: IMAGE,
Check those links:
To BLOB or Not To BLOB: Large Object Storage in a Database or a Filesystem
http://research.microsoft.com/apps/pubs/default.aspx?id=64525
FILESTREAM feature of SQL Server 2008
http://msdn.microsoft.com/library/hh461480
FileTables feature of SQL Server 2012
http://technet.microsoft.com/en-us/library/ff929144.aspx
Compare Options for Storing Blobs (SQL Server)
http://technet.microsoft.com/en-us/library/hh403405.aspx
Binary Large Object (Blob) Data (SQL Server)
http://technet.microsoft.com/en-us/library/bb895234.aspx
Managing BLOBs using SQL Server FileStream via EF and WCF streaming
* Very nice tutorial!
http://petermeinl.wordpress.com/2012/02/20/managing-blobs-using-sql-server-filestream-via-ef-and-wcf-streaming/
[Personal Site] [Blog] [Facebook]

Image Meta Data in the PSE 10 Organizer

Is is possible to get image meta data from an photo in the PSE 10 organizer or the full edit histogram? I thought is was but can't find where to check that option in the organizer. Otherwise, I have to write the image numbers down and put the card back in into my Canon and get the data.
Thanks,
Mike

Open the file in the Editor, then use File...File Info to open the metadata viewing window. At the bottom, click the down arrow next to the "Import" button to get the "Export" option.
Ken

ZISWIN not updating image safe data

Hello,
Have this weird problem on a HP d510c machine. When machine boot up to
pxe, it doesn't find any work to do and shutdown. (other model works,
HP dc7600 etc.)
After some digging around, found ZISWIN contain no data. Register the
wk and still nothing. Try to manually enter the data, and save it. Go
back and check the data is not there again. Try zisedit from bash
prompt, it won't even save.
Completely remove Zen65, reinstall it with Zen65Sp2 and ZEN7 as well
with no luck.
Windows 2000 SP4, Zen65SP1, NWclient 490sp1A.
Anyone has any idea ?
Thanks
JJ
JJ2828

We had a similiar problem with D510c and d5000's. Only some of the
image-safe data was there, but not workstation object or object ID thus
not allowing imaging work to be found.
If you clear image safe data, does it recollect it and work?
The fix I found for this was to enable logging in zis win:
Open ziswin, edit, options, logging, turn on debug logging (single log
file).
I forced this out with a simple reg app to turn it on for every
machine,
[HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZENworks]
"ZISWin Log"="1"
Don't have any idea why, but this solved our problem at multiple
schools.
JJ2828 wrote:
> Just finish install a fresh W2K on a D510c machine.
>
> W2KSP4
> SAV10
> NW490SP1A
> ZEN65SP2
>
> that's all the software on this new box, and it still doesn't work.
> Update BIOS, inf. Nada.
>
> Hardware specific ??
>
> Any help will be greatly appreciated.
>
> Thanks
>
> JJ
>
>
> --
> JJ2828

Quick find image by date

Similar Messages

Maybe you are looking for