Quick flashes after transitions

I am halfway through a 45 minute slideshow and I noticed that in a couple sections of the slideshow there is a quick flash of black screen (I think it's black) at the beginning of the next picture. I've tried taking out the transitions, but the flash remains. I've cleared then reimported the pictures, but no good.
Does anyone know what I can do to get rid of these annoying flashes? As it is, it makes the whole project pretty much useless.
Thanks.

Some of my imported images have quick black flashes while they play. This is before the transitions are even added. I have updated, restarted, emptied trash, prayed and none of it is working; not even close. Any suggestions out there?

Similar Messages

Black flash after transitions

Using iMovie 6, sometimes there is a black flash at the end of a transition (working with photos). Doesn't happen on every transition and doesn't happen all the time. I work in an elementary school computer lab and it happens randomly on all 30 computers. (iMacs 10.5.8) I just put together a movie with about 30 photos using the same transition (cross dissolve) between each one and it flashes on about half of them. Any suggestions?

I had the same problem but with white flashes. Somebody on this forum helped me solve it...
First remove the affected transition. Then highlight a different clip (not the beginning or ending clip betweeen which you want the transition). Then drag the desired transition from the pane between the two clips. The transition re-renders and most times this clears up the offending white or black flashes.
But then it stopped being a problem for some reason - maybe the last update of version 6?

Flashing after adding transitions

Has anyone experienced flashing after adding transitions especially using cross fades. It does not matter what length the effect is. It is frustrating and unacceptable. I have not received one answer in the past. Ever since I added ILife 06 this is is started. Maybe I should get rid of the Ilife update?

I have had the same thing happen. I dont know why but I have solved it two ways - save, quit and reopen. If that doesnt work delete the transition and replace it.
15 MBP, 17 iMac, iBook 14, PM7600 G3266, IIvx Mac OS X (10.4.7)

HT202157 My apple TV is not working with light flashing after up date

My apple TV is not working with the light flashing after an up date, what can be done?

same here macbok air 2012 appletv 3 bugs the **** out of me
it just stops randomly after a "while"

Have to reinstall Flash after every reboot.

Windows 7 - IE9 - Flash version 11.0.1.152 - Plugins and OS up to date - ESET Smart Securty 4
I get prompted to install new version of Flash after a reboot, so it happens at least once a day.
I install Flash and it installs just fine and works until the PC boots up again.
I tried some of the following:
- Use Adobe Flash Uninstall program before installing
- Using standalone install program
- Checked ActiveX Filter and it was off...turning it on causes
   this same behavior, but the problem I have has nothing to do with the filter
Not sure when this started, but the user didn't have this problem until recently.
I am using ESET Smart Security 4. On all our systems, and his PC is the only
one that is having a problem. Need some pretty hard evidence before I bother
with uninstalling ESET just to see if that would help.
The part that is really strange...if I go to manage add-on's while it is working,
I see the Flash player there and Adobe's name there and that it is enabled.
After I reboot and go into the add-on manager, Flash is still there and still
enabled, but it now says "Unknown" instead of "Adobe" and is no longer
listed near the other Adobe programs. But then, when I reinstall it, that gets
"fixed" and now says Adobe again. So it almost seems like an IE9 problem
and possibly a corruption problem. No known problems with the PC. I suppose
that reloading the PC from scratch would fix the problem...at least I hope it would,
but I'm also not ready to do major surgery if there is an easier fix.

sorry no hablo ingless
Date: Fri, 14 Oct 2011 22:39:15 -0600
From: [email protected]
To: [email protected]
Subject: Have to reinstall Flash after every reboot.
    Re: Have to reinstall Flash after every reboot.
    created by ʇɐb ɹəuəllıʍ in Using Flash Player - View the full discussion
I also downloaded that Nirsoft tool, and on my (64-bit) system I also only see the ocx and exe registered. But everything works well on my system. So I currently have no other ideas. Hopefully someone from the Adobe team will have a look at this topic.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3972457#3972457
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3972457#3972457. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Using Flash Player by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

My Apple TV box 's light is quickly flashing on and off. How do I get to my Apple TV settings?

My Apple TV power light is quickly flashing on & off. I cannot access the Apple TV. How do I get to my Apple TV settings?

Since you have an Apple TV issue, you will likely get a much faster and more informed response if you post in the support area for the Apple TV.
The link is below:
Using Apple TV
In the meantime, hold down the Menu key and Down Arrow key on the Apple remote for 8-10 seconds and release. Give the Apple TV a minute to hopefully restart back to normal.

Did anyone experience drop down in # of user usage in Apple's weekly report after transitioning?

Hello,
Did anyone experience drop down in # of user usage in Apple's weekly report after transitioning to the new structure (or design)?
We transitioned our public iTunes U site on the first week of April.
Since then, the number in the apple's weekly report showing the user usage of the site dramatically went down.
I don't think all the RSS feeds and the URL of our podcasts changed due to the transition.

Greetings;
The following previous discussion thread might shed some light on your issue. All the best...
Syd Rodocker
Tennessee Department of Education
http://discussions.apple.com/thread.jspa?messageID=13000515&#13000515

My wi-fi connection is good & i want restore my iphone.But a massage flash after few min-iPhone could not be activated because the activation server is temporarily unavailable." SIM is in searching mode. What i can do.?

My wi-fi connection is good & i want restore my iphone.But a massage flash after few min-iPhone could not be activated because the activation server is temporarily unavailable." SIM is in searching mode. What i can do.?

You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one.

ICloud after transition to iOS 7 is disconnected

After transition to iOS 7 already several times in the iCloud settings all settings are disconnected. Regularity I didn't find. I want to call, I open contacts, and the list is empty. Slightly the heart attack didn't grab. It appeared that in the iCloud settings all points were disconnected. I included - everything was restored. Thus he didn't forget the password.

not know?????

I am not able to install quick time after i deleted it accidentaly

I am not able to install quick time, after when i deleted it accidentaly. Actually it was installing but i am not able to see the icon in applications

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful it won't install normally.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

2007 Macbook Pro - Won't turn off or on. Power on button only results in quickly flashing power-on button on front of computer by display open latch. Turn off by disconnecting power cord and removing battery. Help!

2007 Macbook Pro OS X Maverick with maxed out processor and hard drive. It's been running beautifully for years! - When shutting down the computer failed to turn off. Now it won't turn off or on. Powering on only results in quickly flashing power-on button on front of computer by display open latch. To turn off by disconnecting power cord and removing battery. Help!

Hi P S 13,
If your MacBook Pro will not power on as you describe, I would suggest you troubleshoot using the steps in this article -
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Thanks for using Apple Support Communities.
Best,
Brett L

You Tube not playing video on Firefox with Adobe Flash after latest update

You Tube and other sites are not playing video on Firefox with Adobe Flash after latest update for both. Adobe Flash is working on other sites but not You tube and those sites that may have embedded You Tube videos, I'm not sure.
Adobe Flash does not crash and no error message is showing. All that shows is a dark screen for the Flash video. Right clicking the screen shows only a non-clickable 'Movie not loaded' and the clickable link to the Adobe home page.
I have spent an hour trying things as suggested for past problems similar to this but none have helped.
I have sent sad face letting you know what I think of the latest update because of this which says pretty much the same thing as I have said here.
I have no further info but if I had some input and queries form you I might be able to provide more.

I'm not sure how to remove the 12.xxx version,. I don't understand why it is there, usually updates over wirte the old one as far as I know. I don't know where to find it.
pref .js deleted.
I could not find a user.js
I disabled hardware acceleration on one of them, not sure which and I don't remember how I did it but think it must have been on the flash.
No idea what protected mode is
no new profile, I've never done this.
Ok, did what you have said as much as I could. I have been fidgeting with things now for a couple hours. After doing a CCleaner and Registry cleanse, turning off and restarting the computer, the videos are now p-laying.
I would still like to know how to find and get rid of the duplicate Flash plug in though if you would't mind.
Thanks for the help.

The red Pilot Light on my Canon 580 EX II started flashing after using it for a few flashes.

The red Pilot Light on my Canon 580 EX II started flashing after using it for a few flashes.

Last time I ran into this problem because the batteries was faulty. It may not be, but you should get a new set of battery to test out.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

How do I access flash after downloading it?

How do I access Flash after downloading it to my PC

Double click the program icon is what works for me

Update Flash after doing Snow Leopard upgrade

Just as an FYI: I upgraded from 10.5.8 to 10.6 this morning. Before the upgrade I had the latest version of Flash (10,0,32,18). After the upgrade I had an earlier one--I don't remember which one exactly, but it was something like 10,0,23,? or so. You can check your Flash version here:
http://www.adobe.com/software/flash/about/
Anyway, be sure to update Flash after you do the Snow Leopard upgrade.

Sounds like you've damaged your system by forcing it to quit and restart in the middle of installing. You probably also had something wrong with your machine that was interfering with the installation in the first place, as the Snow Leopard installer is ordinarily pretty good at failing without damaging anything if something causes it to fail.
I would advise [repairing the hard drive with Disk Utility|http://support.apple.com/kb/TS1417]. If that fails, you'll need to erase and repartition the hard drive and reinstall Snow Leopard from scratch. If repair works, but you still can't boot, you probably have corruption in important system files. You could try installing Snow Leopard over it at this point, while booted from the Snow Leopard disk. If repair shows no problems, post back here, as you've got something a little more exotic than simple hard disk damage going on.
Do you have a backup? If not, it's possible all your data might be gone at this point, depending on what exactly has gone wrong with your computer. You can try to back up from Disk Utility running from the Mac OS X install disk... see the Restore tab. You'll need an external hard drive to which to copy.

Quick flashes after transitions

Similar Messages

Maybe you are looking for