Quick ? - How do I Assign IRQ For VGA (865PE)
Quick Question - How do I Assign IRQ For VGA (865PE)
Kim :D
IANG
You can't as all taken care by WinXP ACPI.
Similar Messages
-
[VIA] KT3 Ultra2 - - need to "Assign IRQ to VGA" in Bios but how?
G'day people,
I am having a little drama with the instalation of a new video card. The system recoginses a hardware device, and nVidia WDM Video Capture (Universal) bbut after driver install, I get an error This device cannot start (Code 10). The FAQ over at nVidia says that:
The Code 10 error is most often a result of not having the option "Assign IRQ to VGA" enabled in your motherboards system BIOS.
My problem is I cannot find how to enable this option in bios. Any ideas? Just going to reboot and edit this post with the BIOS version.
Okay.....When I enter Bios the info say AMIBIOS vers 3.31a.
Thanks.Thanks for this help people, I am quite new at this. Only been tinkering for about 5 years.
Quote
That's not the right number, I belive what you are looking at is the American Megatrend version, not the actual BIOS string. It's usually at the bottom of the screen.
The only available BIOS versions are 1.X or 5.X depending on the version of mobo you are using. You need to confirm that first.
Okay how about version 5.5 date is 07/10/02.
Quote
In which slot is the sound card?
Is there a modem involved somewhere?
Did you uninstall the previous card's driver properly? Enter SafeMode to find out.
Okay the sound card is in IRQ17 which it shares with an modem. (???)
Yes I made sure I uninstalled the old graphics card driver before I installed the new one.
Also:
Resource Share Device Description
IRQ 16 Shared Realtek RTL8139 Family PCI Fast Ethernet NIC #2
Resource Share Device Description
IRQ 16 Shared NVIDIA GeForce 6600
Could this be my problem???
Quote
What system are you running in your PC ? Did you enabled APIC Function in Advanced Bios Features ? You have said very few about your PC. so better explain with more detail your hardware ( Memory speed, system etc.)
System?? as in operating system? Win XP Pro. that is is my sig. will check on that APIC.
Extra info.
Field Value
Motherboard Properties
Motherboard ID 62-0710-009999-00101111-040201-VIA_K7$1AARK204_A6380VMS V5.5 071002
Motherboard Name MSI KT3 Ultra2 (MS-6380E)
Front Side Bus Properties
Bus Type DEC Alpha EV6
Bus Width 64-bit
Real Clock 133 MHz (DDR)
Effective Clock 267 MHz
Bandwidth 2133 MB/s
Memory Bus Properties
Bus Type DDR SDRAM
Bus Width 64-bit
Real Clock 167 MHz (DDR)
Effective Clock 333 MHz
Bandwidth 2666 MB/s
Chipset Bus Properties
Bus Type VIA V-Link
Bus Width 8-bit
Real Clock 67 MHz (QDR)
Effective Clock 267 MHz
Bandwidth 267 MB/s
Motherboard Physical Info
CPU Sockets/Slots 1
Expansion Slots 5 PCI, 1 AGP, 1 CNR
RAM Slots 3 DIMM
Integrated Devices Audio
Form Factor ATX
Motherboard Size 230 mm x 300 mm
Motherboard Chipset KT333
Extra Features Fuzzy Logic 4
Motherboard Manufacturer
Company Name Micro-Star International
Product Information http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php
BIOS Download http://www.msi.com.tw/program/support/bios/bos/spt_bos_list.php
And memory:
DIMM1
Field Value
Memory Module Properties
Module Name Kingmax MPMB62D-68KX3-MBA
Serial Number None
Module Size 256 MB (2 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC2700 (166 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Normal (15.625 us), Self-Refresh
Memory Timings
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-3-3-6 (CL-RCD-RP-RAS)
Memory Module Features
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Not Supported
On-Card PLL (Clock) Not Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported
Memory Module Manufacturer
Company Name Kingmax Inc.
Product Information http://www.kingmax.com/product/pro_newp.htm
DIMM 2
Field Value
Memory Module Properties
Serial Number None
Module Size 256 MB (1 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC2700 (166 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
@ 133 MHz 2.0-3-3-6 (CL-RCD-RP-RAS)
Memory Module Features
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Not Supported
On-Card PLL (Clock) Not Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported
AND DIMM 3
( I realize there is a mismatch here but have had no dramas as yet because of it, will try re-installing the hardware wit h this module removed)
Field Value
Memory Module Properties
Module Name Nanya M2U51264DS8HC3G-5T
Serial Number 884B2815h
Manufacture Date Week 48 / 2005
Module Size 512 MB (2 rows, 4 banks)
Module Type Unbuffered
Memory Type DDR SDRAM
Memory Speed PC3200 (200 MHz)
Module Width 64 bit
Module Voltage SSTL 2.5
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh
Memory Timings
@ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS)
@ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS)
Memory Module Features
Early RAS# Precharge Not Supported
Auto-Precharge Not Supported
Precharge All Not Supported
Write1/Read Burst Not Supported
Buffered Address/Control Inputs Not Supported
Registered Address/Control Inputs Not Supported
On-Card PLL (Clock) Not Supported
Buffered DQMB Inputs Not Supported
Registered DQMB Inputs Not Supported
Differential Clock Input Supported
Redundant Row Address Not Supported
Memory Module Manufacturer
Company Name Nanya Technology Corp.
Product Information http://www.nanya.com/e-htm/abc/abc-03.htm
Thankyou for your help with this folks, really appreciate it and am having some fun learning. -
OK, this may be a case of a good thing it's not a snake, but how do I get the BIOS to assign an IRQ to the AGP slot? Sandra says that the VGA is operating without an IRQ, and I've got some apps that gripe about it as well.
Every other mobo I've used has this as an option in the BIOS, but I'm danged if I can find it here.
ScottQuote
Originally posted by REILLY875
You are right..There is no such option in the BIOS , Which leads me to believe that it is assigned automaticaly..But you are indeed correct, as my other PC has the Option in the BIOS..But if you really do want to change the IRQ setting, You should read Pages 30-21, 30-21, in the Users Guide, as it tells you how to manually assign IRQ's to the PNP/PCI Devices............Sean REILLY875
Hmm, on running a system check with Sandra 2002 Pro it claims the VGA is running without an IRQ, however when running the IRQ module it shows VGA sharing IRQ 16 with the USB.... Very interesting.
Scott -
How can I assign authorizations for the Flight list data?
Hello,
I am doing the Web Dynpro tutorial for calling BAPIs from Web Dynpro.
I have finished it successfully but I don't get any data back. When I checked this BAPI with SE37 I receive a message "No Authorization" at the RETURN parameter.
My question is: How can I assign myself these authorizations?
I am not a BW person so a step-bystep explanation will be very helpful...
Roy
Message was edited by:
Roy Cohenhi jaya....
1. you need generate the table maintenance using the Menu Utilities->Table maintenance generator
2. give the authorization group, package, function group, overview screen number etc.
3.create the table maintenance
4. now go to se93
5. give custom tcode and say create
then enter description , and then
choose the radio button Transaction with parameters
6. now enter tcode as SM30 and check the check box skip intial screen
7. Check all gui support buttons
8. now go down and enter VIEWNAME from F4 help and value as table name
9. and add UPDATE(choose it from F4) and value as 'X'.
VIEWNAME ZTABLE
UPDATE X
and save it, now check the Tcode.
or
use se80...create a transaction...click transaction with parameters and use SM30 as the basis....set VIEWNAME to the table's name and UPDate to X (no quotes)
If you find it useful mark the points
~~Guduri -
How can I assign shortcuts for navigation in 3D mode?
I'm a 3D artist, and I've been using photoshop for texturing my models for so long. Now that photoshop has improved it's 3D features, It's making my life so easy, but there's a problem(other than the memory consumption).
I have to change my navigation from rotation to panning and zooming by clicking on the buttons on top, and for a long run it would be devastating , and I haven't found a way to assign any shortcuts to them so I can easily and quickly hover around my 3D model to texture and paint it.
I personally Believe that It won't be addressed until CS7 or some other version. I just wanted to share this question with you guys n see if there's some way that I haven't figured out yet!The navigation is a mess despite there being countless 3D apps to provide inspiration to the Photoshop 3D developers. The effect of a given modifier key or combination of keys confusingly changes, depending on the mode of the Move Tool, and sometimes the wrong cusor is displayed. It's a no-brainer to allow the user to define behaviours for middle-button and right-button mouse dragging but these drags aren't utilised at all in Photoshop.
If Move Tool is active (not temporarily enabled as described below) then successive presses of V key will cycle through its 3D modes such as Rotate, Drag, Slide, etc.
While painting, navigation is possible by holding down V key to temporarily enable Move Tool.
Before painting, set Move Tool to 3D Rotate mode and select Current View in 3D panel.
Now activate a painting tool such as Brush Tool.
While the painting tool is active, hold down V to temporarily enable Move Tool and:
· drag in doc window to rotate view then release V to return to painting.
· hold down mouse button then, on a Mac at least, hold down Ctrl key then drag in doc window to drag view in the screen plane, then release mouse button before releasing Ctrl key or the view will suddenly rotate, then release V to return to painting.
Other modifier keys, alone and in combination, can change the behaviour of Move Tool. If you're very lucky, you'll find a set of modifiers to provide all three of Rotate, Drag and Slide while the Move Tool is set to one particular mode.
If you're using a tablet instead of a mouse then... I don't know. -
How to dynamically assign assignee for human task?
I tried to use xpath expression in task editor. Expression editor suggested me to use task schema and I could not use variables from process.
I had selected systemMessageAttributes.textAttribute1 and created “Assign” activity to initiate the attribute. This does not work. When task is started assignee is empty and task is automatically completed.
Does anybody used this feature?Hi,
You can run the soa server in debug mode by adding remote debugging parameters in startWeblogic.sh of soa server and remote debug it to check problems.
e.g.
+#For Debug Port+
+if [ "${SERVER_NAME}" = "soa_server1" ] ; then+
+JAVA_OPTIONS="${JAVA_OPTIONS} -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=9023,server=y,suspend=n"+
+export JAVA_OPTIONS+
+fi+ -
How can we assign tax for SAP B1
hi
Ayone give me full detail of taxesH i rajan
you are confusing yourself, well these are the tax codes that are pre difined, and have to be assigned according to the client requirement, it depends on the nature of business the client is into...
when you say VAT, it is sales tax which is calculated on the whole document amount meaning after calculating CENVAT (BedEcessHcess),
i hope you are looking for the nature of TAXES ?
Thanx RIYAZ -
How can I assign filename for the Write Table to XL.vi from NI sample?
The sample from NI (Write Table to XL.vi) works fine, but always it open a "Book1" as defult then askes to save it later!
I try to modify it and assign a meaningfull filename so that the user does need to save or rename it ... but I failed!
Is there an easy way to modify this sample for that purpose? Can anyone help me?
Thanks.
Attachments:
Write_Table_to_XL.vi 102 KBHi ATC,
I modified your vi, it creates an XLS file with the filename you assign (no dialog box).
You get a dialog box only if the file already exists, but this is normal; if you don't want to have it either, simply delete it progammatically before creating the new one.
Good luck,
Alberto
Attachments:
Write_Table_to_XL.zip 34 KB -
IRQ problems with 865PE Neo2V and MSI NX6600-VTD256 VGA
Hi All,
I thought I would try a posting here first for help before filling out the cumbersome service request form. I recently purchased the 865PE Neo2V motherboard with an intel 3.2Ghz processor, 1 Twinmos 1024MB DDr400 memory, 2 Maxtor Diamond 250GB S-ATA HDD's and the MSI NX6600 VTD 256 AGP VGA card. I am also running a Plextor 716a dvd burner and a Toshiba DVD Rom on the secondary IDE slot nothing on the primary for 2 S-ATA drives and 2 P-ATA for a total of 4. I have always had a very good experience with MSI products in the past, easy to install and for the most part problem free. That is until now. I am having a rough time with the VGA card and IRQ conflicts. In the past with all my MSI motherboards I was able to choose ( Reserve IRQ for VGA) Not so with the 865PE NEO 2V.( Unless I am missing something and doing it wrong) To make a long story short the MSI NX 6600 (NVIDIA GeForce 6600) VGA card is sharing IRQ 16 with Intel(R) 82801EB USB Universal Host Controller - 24D2 and Intel(R) 82801EB USB Universal Host Controller - 24DE. For the most part the system runs OK except every so often during startup the system loses the VGA Card and tries to reinstall the card and software. After reinstalling the software the first time it happened I subsequently tried choosing Cancel on the prompt to install and simply reboot the computer. To my surprise the system always seems to see the VGA card on the second boot! and works fine. I have been running the system for two days now with the USB disabled in the bios which gives the VGA card IRQ 16 by itself, so far the system has seen the VGA card each and every startup without problems. Since the USB and AGP are fixed I am unable to move anything. Unfortunately I need the USB for my printer and scanner. I would also like to add that I have the latest BIOS upgrade for the Motherboard and the latest MSI Drivers for the VGA card.
Any suggestions on how to get the VGA card on its own IRQ?
Thanks for any input
Mike
Edited to add that For an OS I have WinXP Pro service pack2Quote
or rather, the poorly installed drivers.
Frankenputer
I take umbrage with your statement. I installed the latest drivers from MSI correctly! I also chose not to install the very latest as they are a Beta version with the warning they may be unstable! Perhaps I was under the misguided impression that I would be better off with the latest drivers offered by MSI for the particular VGA card I paid my good money for! ( this is the main reason I thought the problem was not driver related!) It is not my fault that MSI dropped the ball in its offerings to its valued customers!
Just because I was being polite to Hans who offered so much good advice and showed such a genuine concern for my troubles doesn't mean I had not read the advice from Nvidia on how to uninstall and reinstall "their" drivers! I will admit though that from my read on Nvidias suggestions they did not go as far as to recommend uninstalling the norton works completely, only disabling it!
On another note My computer seems to be starting so far without the problem! On yet another note after installing Nvidias driver package Version: 91.31 You get a warning every time you start up that the SLI is disabled. (unless your sli equipped) I found a fix for it and have it stored on my web space if anyone wants it. It is a zip file and I guarantee that I've scanned it with Norton and it is virus free. After unzipping it and clicking on it it makes an entry into the system registry removing the warning.
It is here: http://home.casema.nl/mdybus/FixSLIBug.zip
Modified to add:
I just checked my email and have a reply from the service department. Here is what they said:
Quote
Dear customer,
The latest BIOS can be installed using Live Update:
http://www.msi.com.tw/program/support/software/swr/spt_swr_list.php?kind
=1
The latest driver for the VGA can be found on www.nvidia.com. We (and
other VGA vendors) do not make our own drivers, nVidia (and ATI) make
the drivers. So at the website from nVidia the latest drivers can be
found.
Best Regards, -
Assigning access for combinations of dimension members
Security Dilemma Example
Two Dimensions: Site and Department
Site Members Department Members
Site A Dept 1
Site B Dept 2
Site C Dept 3
Question: Is it possible in BPC version 4.2 SP4 to set up the following access for an user?
User A needs access to Site A and all departs only for Site A
User A needs access to Site B and only Dept 2 for Site B
User A needs access to Site C and only Dept 1 and 3 for Site C
My understanding is that if a user is given access to all departments, then he would be able to pull those depts for ALL sites he has access to. How can I assign access for combinations of members from different dimensions?Hi,
Just to understand what you specified,
Site Members Department Members
Site A Dept 1
Site B Dept 2
Site C Dept 3
These 3 Dept's are there in all the 3 Sites. Is my understanding correct?
If that is the case, better would be to maintain 9 IDs for Dept dimension
Dept1_SiteA, Dept2_SiteA, Dept3_SiteA,
Dept1_SiteB............................................
...........................................Dept3_SiteC
That means you have 9 Dept members. Now it becomes very simple to assign access.
I dont think there is any way to assign security to combination of dimensions.
Hope this helps. -
How to enter an account assignment category for a material.
Hi guys:
I am facing following error prompt,please tell me how to enter an account assignment category for a material.
thanks
Account assignment mandatory for material 0000000N6451 (enter acc. ***. cat.)
Message no. ME062
Diagnosis
There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
Procedure
Please enter an account assignment category.HI Shyam :
Go to transaction type OMS2. Check whether the material type u are using is ticked for Value update.
If not,
a. Use a different material type
b. or Use an account assignment category.
How to use B,that is hot to enter an account assignment cateogory -
I have recently bought a Logitech R800 presenter which works very well with Keynote on a MacBook Pro. The start/stop presentation key does not work but that can be easily fixed by assigning F5 to "Start presentation" for Keynote in the keyboard system preferences. The remaining issue is that the blank screen button sends a period (".") which works as a prompt for a blank screen in PowerPoint, but in Keynote it causes the slideshow to end. Keynote uses the letter "B" for blank screen.
How can I assign a period (instead of B) in Keynote for blank screen? Some sort of work around would be very useful as I often use blank screen in my presentations and much prefer Keynote to PowerPoint.
Perhaps it will be an option in next version of Keynote?
ThanksAs far as I know you can not change these keystrokes without changing the Program files. I am sure it is possible there, but I have no idea where to even start to tell you where to find it.
Your best bet it to go to the Keynote Menu>Provide Keynote Feedback and let Apple know you would like the option to change them. -
Purchased CC for business and can only assign one user. How can I assign more users to have it on all 4 computers in the office?
Hi there
You would need to purchase a seat for each user.
What you currently have is 1 seat = 1 user.
Kind regards
Bev -
How to assign values for more than one field
Hi,
I have written following code
constants: fieldname(30) value '(SAPMF02D)KNA1-AUFSD'.
constants: fieldname1(30) value '(SAPMF02D)KNA1-LISFD'.
constants: fieldname2(30) value '(SAPMF02D)KNA1-FAKSD'.
field-symbols: <L_FIELD> TYPE ANY.
field-symbols: <L_FIELD1> TYPE ANY.
field-symbols: <L_FIELD2> TYPE ANY.
Assign (fieldname) to <l_field>.
<L_FIELD> = 'ZB'. " value according to your requirement
Assign (fieldname1) to <l_field1>.
<L_FIELD1> = 'ZB'.
while debugging <l_field1> is not assinging (fieldname1).
Im able to assing for (fieldname).
how to assign value for (fieldname1).
plz suggest me to assign values for more than one field.
Regards,
BrahmajiHello,
Because there is no field name called LISFD in KNA1. Actually you misspelled the field name.
It is KNA1-LIFSD -
CUA with HR-Org - How to assign systems for role
Dear all,
we are planning to use CUA with HR-Org assignment. Can please anyone explain to me how or where the system for the role comes from.
I mean, normaly in SU01 -> Role Assignment I have in the first colum the system and in the second colum the role. It the role assigment come from HR-ORG there is always the local logical system in the system colum. This is not what we want.
CUA is on Solution Manager, HR-ORG is replicated from R/3 HR Systeme and the user needs the roles in ECC production systeme.
So how can we manage the system/role combination assignment?
Thanks for any hints.
Best regards
RomanHi,
If I understand your problem you want to do role assignment from the HR-Org structure on a system that is using CUA.
I have only managed this successfully when the CUA master is also the system with the HR-Org structure on it. Otherwise you have lots of issues with replicating data between systems. I did this for a UK council's SAP solution where we allocated all the roles from the HR system, including roles on ECC, SRM(EBP), CRM and BI - so it does work.
PO13 on the system with the org. structure will only allow you to allocate a role that exists on that system, but if the roles that you are allocating are composite roles that include single roles on other systems, you can achieve this sort of business role allocation without having to go the IdM route.
Darren Hague (no relation) gave a presentation at SAP Tech Ed 07 on such a scenario, that explains how the composites would be set up far better than I can, but in essence you use the CUA connectivity and the rights of the CUA master system (which includes the org. structure) to allocate roles on other systems / clients in your CUA landscape.
Have a search through SAP Tech Ed 07 presentations and you should find what you are looking for.
Maybe you are looking for
-
Going from mac to pc- genius bar screwed me
Okay I had my ipod since january and I had a problem with it once, my computer was taking too long to recognize it. So I took it into the genius bar and he connected it to his macintosh, I am an adament PC user (i know i know i need to get a mac), I
-
Successfully Created HD DVD that Plays in the Toshiba HD DVD Player BUT...
So, (I'm a student at Baylor University). I have successfully created several HD DVDs (on DVD 5's -- will try Dual Layers later this week) with DVD Studio Pro, and they play back on the new Toshiba HD DVD player. Got about 25 minutes of 1440x1080 23.
-
Can't convert from cover mode to communicator mode
Hello every body. I 've just bought an E-90 communicator. the first thing I noticed that when I open the display part, sometimes it doesn't convert to the communicator and stays in the cover mode. Can any body help me out on this?? does any body know
-
Just what I said above!
-
My Lime iMac 333 (X.1) dosent have any fire wire ports for fourth gen ipod. This may sound crazy, but is there some kinda adapter ting that converts USB to FireWire??