Quick launch buttons no longer work

It seems like this is a common problem, and yet I cannot find a solution that works for my DV7-3085. I have tried 5 different drivers, numerous other 'tricks', battery/power pulls, to no avail. None of the buttons work, and only the media buttons are lit (wireless and mute no longer even light up). Also, now the Num Lock indicator light does not light, even when it is on.
60 days old and this thing is taking a dump...nonsense...

Uninstall the current HP Wireless Asistant and reboot.
Try installing newer version of HP Wireless Assistant sp49018.exe
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Similar Messages

Hp Elitebook 8530P quick launch buttons has stopped working

HP Elite book 8530 shows quick launch buttons has stopped working, Catalyst Control Centre : monitoring Programe stopped Working,
HP Health Service : Stopped Working
There is no solution in Windows Vista Forms

Hi,
nalla_jeya wrote:
HP Elite book 8530 shows quick launch buttons has stopped working, Catalyst Control Centre : monitoring Programe stopped Working,
HP Health Service : Stopped Working
There is no solution in Windows Vista Forms
Go to Control panel, software and verify that the programs are installed. Now uninstall them. After you have done that you can reinstall them from the HP Backup and Recovery manager. You can either do it from an F10 key during the startup of your laptop or from the HP Recovery CD set that you (should) have made.
See this HP web support document for information on how to restore the software.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Sound quick launch button doesn't work when i installed windows 8 in my hp pavilion dv3z notebook

1. Product Name and Number
hp pavilion dv3z notebook pc
2. Operating System installed (if applicable)
windows 8
3. Any changes made to your system before the issue occurred
installed windows 8
when i installed windows 8 in my hp pavilion dv3z notebook pc, the quick launch button of volume is always red and the sound is mute....the driver for quick launch buttons and driver for sound is also up to date....can you please help me?
This question was solved.
View Solution.

When installing the audio driver, was it installed by following the prompts or in compatibility mode as outlined here?
Based on the Software and Drivers page for this unit, the unit was not tested and certified for Windows 8. This means that some functionality may not be the same since the unit was not designed for Windows 8. See this site for information and to find out if it has been tested for Windows 8.
If the sound driver has not been installed in compatibility mode, then I recommend using the Windows 7 64bit driver found here and using the linked steps above to install it in compatibility mode.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Satellite P300 - Quick launch buttons don't work after Windows 7 upgrade

I upgraded my Satellite P300 from Vista to Windows 7 professional. Initially everything worked fine, now for some reason the inbuilt microphone and the speakers do not work. I subsequently found that none of my 'Quick Start' buttons work, ie I cannot turn them ON or OFF, so perhaps the quick start Mute button is OFF, hence no sound. A computer check of the Microphone and the Speakers confirm that they are working so I guess the Mute button is On, no sound.
Is there any way I can get the Quick Start buttons to work again or turn the mute button OFF so that I can get sound. The funny thing is the speakers work if I use Skype, but I cannot play a CD.
Any help would be greatly appreciated.

Hi Dr Lamp
Thank you for your reply. After upgrading from Vista to windows 7 from the disc everything worked fine, a month later for some reason the sound just stopped. When I play a CD or select music from the computer and double click on the speaker icon I can see the music playing but there is no sound, it is muted, but why I do not know.
It is interesting that you Added Vista stuff because when I had Vista everything worked fine, I just didn't like it much. As I am a novice how did you add it. If I add something, does it run alongside Windows 7 or does it replace some bits. The reason I ask is that in Windows 7 the courser jumps around in Word making writing letters difficult, I have to disable the pointer when writing which is a pain.
Looking forward to hearing from you and thanks for your help

DV7-1279WM microphone and quick launch buttons stopped working

For some reason my quick launch buttons and microphone have stopped working on my DV7 laptop. I know that I recently used the microphone on a Skype call, but believe since that time that Vista SP2 was installed. I am not sure when the quick launch buttons were not working, but have just literally (talking less than a week ago) got the laptop back from HP for a warranty issue with the display. A strange thing I noticed is that if i look under the settings in Skype, the microphone will record a level for a split second, but then go back to nothing again (someone I was trying to talk to said they could hear me for a second).
I thought it might be the same problems as in the 35 page thread on here, but I have sound, its only the microphone and quick launch buttons that are not working. So far I have rolled back, installed and updated sound drivers, BIOS and Quick Launch software, but no luck.
Any suggestions? Thanks.

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

Reg: Quick Launch buttons on HP pavilion dv4 laoptop

Hi, I am having HP Pavilion dv4 laptop, today all of a sudden my quick launch buttons are not working. I installed new version of quick launch buttons drivers. But it doesn't worked. The wireless, quick play, audio buttons are not working.
While i pressed Fn+F5 , laptop was hibernated, and I activated then the wireless button turned into blue but there is no internet connection of wireless.
What would be the problem... ?
need help

Hi,
Uninstall this version of HP Quick Lunch Buttons which You have installed and try this one here .
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Quick Launch buttons not fully fuctional

I have a Pavillion laptop 6930 and I just upgraded to WIndows 7 ultimate 64. the quick launch buttons are not working properly. I installed some drivers I thought would make them work fully but was unsuccessful. The problems are that when I click the Mute quick launch button is that it does not turn orange any more. In vista the button would turn orange but not in 7. Even though it still mutes my computer I would like it to turn orange like it use to. The on screen Displays of the volume slider also does not show up. The quick launch button lowers and raises the volume but doesn't show on screen display of it. Back in Vista it had a green bar that would show up in the bottom right and move according to your finger on the quick launch button. Any solutions?

Hi,
Try a Hard Reset as follows.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for a full minute. Re-insert the battery, plug in the AC Adapter and start the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Dv7-1130us - Quick Launch buttons not working - though they light up correctly

I'm trying to enable wifi, though the quick launch buttons are no longer working. They used to work, though I've had my laptop repaired at the service center (to replace the keyboard), and I also immediately upgraded to windows 7 once my laptop was returned.
I've done a hard reset, upgraded the bios, and upgraded the quick launch button drivers, though nothing is working. When windows boots, the wifi image on the quick launch bar transitions correctly as it has always done (blue to orange - since I had I usually had it disabled before I sent it in for repair and upgraded).
Is there a way I can enable the wifi card without having to use the quick launch buttons? The wifi card has always functioned correctly when it was enabled, and it's working properly according to the device manager. I just need to either find a way to enable it without using the quick action bar, or get the quick action bar working.
Any suggestions? I'd rather not send it back in for repair, it's a lengthy process.
This question was solved.
View Solution.

Uninstall the current HP Wireless Asistant and reboot.
Try installing newer version of HP Wireless Assistant sp49018.exe
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Quick launch buttons and touch functions not working post win7 upgrade

I have several problems that I think are related.
1) When I rotate the screen and then bring it close (as in flat) to the keyboard, the screen goes blank. There is no key combination I can find that restores the screen. Putting it back in notebook orientation doesn't do anything either. Only thing to do is a hard reboot.
2) the quick launch buttons on the screen edge are not functioning as follows:
a) the hp mediasmart button (the one with the wave) doesn't work
b) the screen rotation button produces the same problem as 1) above
c) the third button which looks like either gears or a sun (I don't know what it should do) brings up the windows mobility center, where I have found problem number:
3) On tablet PC settings, the display tab, there is one display: 1. mobile PC display
on the same tab, there is a setup button. The next screen says:
pen input
touch input
Regardless which one I select, on the following screen (where it says Press this screen with ....) when I press with either my finger or the pen, nothing happens. Which seems like either:
it thinks another screen is active or
the touch components are completely non functional.
4) Not surprising, the touch functions are completely non-functional
I have installed all of the drivers for this TX2-1025dx for Win7(64bit) per the HP support/drivers page.
Not all of them resulted in a clean install.
Here are other drivers that I had problems with (meaning that I got an error message, it failed, it had to be done more than once, something else broke, etc.)
AMD AHCI - started catalyst installer then failed
Authentic fingerprint driver - "dpinst64 not marked for installation"
Ntrig Duosense - had to do this one multiple times to get the fingerprint reader to work
HP Mediasmart MVP - hung in CMD
I have checked that all of the startup services are actually enabled in msconfig including quick launch buttons, hpwuschd, and media smart. Nothing is disabled in services.
I have reinstalled the quick launch buttons driver for this product from December 2009. (There is an earlier version from November.)
I installed the bios upgrade (before win7, actually) it is currently F.25
I have also eliminated EMF possibilities.
I have searched the forums, and while I have found some interesting clues, I don't see anything like this - at least with a solution.
Any assistance would be greatly appreciated as this thing is quite useless to me as it currently functions. It is not a tablet anymore.
TIA

[knock knock] Helloooooo??!!??
Installed 6.50.9.1, which is in between the last two quick launch button (QLB) drivers (that did not work). Also fixed the lightscribe and mediasmart DVD installs. Same problems, no touch or pen, and a new bug I discovered with qlb
First, if you search for tablet in the start menu, there is a selection to set the tablet buttons to perform certain tasks. When you run that, it says that teblet buttons are not installed on this pc. Doesn't matter if QLB is installed or not - same error. Hmmmmm. Check with your pc manufacturer..... I think I am doing that. I am starting to feel like I am working for HP.
Next finding: Using mobility center, I found that if you orient the screen to landscape for the slate config, and then rotate the screen, it does not go blank. However, if you rotate the screen back to notebook, it goes blank. And of course it keeps that upsidedown config when you reboot, too. So, the way to recover from that (because you really need a keyboard if you don't have a working pen and touch takes 30 sec to respond) is to keep trying to get touch to orient the screen back to landscape for notebook. Then rotate the screen to landscape for notebook. And uninstall the QLB driver that doesn't work and reboot. But after that, touch and pen did not function.
Since touch and pen had previously been restored when I uninstalled QLB, I reinstalled MVP and smartmenu coz they were the actions that I took the last time before touch and pen returned. Didn't work this time, tho.
I decided to do a system restore back at the point that I had used HP Advisor, since that was the last time I made note that pen and touch were working. Restore failed because a sfi.dat file was not found (and search didn't find it anywhere either). I tried 5 different restore points, before and after that one, and they all failed. But the first time around, I had touch on the logon screen, just not after windows started. The next time, I had touch but not pen. The next time, I had touch and pen, but only for a period of time (I think HP Advisor may have been the intervening event) before they stopped working.
Oh, and HP advisor does not appear to be actually installing the things on the action list. That could be an issue with Comodo, but it really looks more like an issue with that "mother may I" message from Windows asking for permission to run the program. Often as not, windows reports that the program is not responding. Closing the program with that dialog box actually gives it the kick in the knickers it needs to complete.
A not so great workaround is to use the mobility center to orient the screen when you want to put the thing in slate mode. You can pin it to the task bar (with a little fiddling). Touch is extremely slow to respond in slate mode. For example, it took about 3 minutes to get the screen oriented back around to notebook config, which is 4 "clicks" if things are working right. Pen works sort of OK (although I haven't tried any writing) . Gestures for scrolling do not work.
I am done with the troubleshooting until someone comes up with other targeted ideas.I have been keeping detailed chrono notes.
Again, I hope the information here leads to a solution. This unit is not a functional tablet and I don't want to stay with Vista, neither should I have to since this is supposed to be compatible.

Quick Launch buttons not working on Window 8.1

I have installed window 8.1 but quick launch buttons, which used to work with combination of FN key, for example fn+F3 key for brightness, fn+F8 for volume, fn+F6 key to lock the computer etc are not working. What is the solution?

Farhan_Raza
I have available a pretty extensive list and I cannot find a Quick Launch Driver for Windows 8.1. Might be one; I don't see it.
I use a completely different arrangement of Custom Toolbars from what most people use so I am not at all sure what constitutes a Quick Launch.
I did find the following that may be close to what you seek:
How to enable Quick Launch in Windows 8.1
=========================================================================
Possible Option - HP Launch Box Manager
Windows 8.1 provides the following -- this program MIGHT install on your computer and it might run on your computer. It is not rated for your system. You may try it if you like. Windows will tell you if the program is not appropriate for your system.
For Windows 8.1, you might be able to use the HP Launch Box Manager:
Close running programs, browsers, and games
Next:
Create a Restore Point:
Create a Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Download / Save:
sp63808 HP Launch Box V1.1.5
Double Click or Right-Click on the file and install as Admin...
The application installs in seconds and then disappears.
Windows key (opens the Start Screen) > type anywhere, the word: Launch Box >
Click to start the Launch Box Manager
The Launch Box Manager will start on your Desktop and offer a list of available applications from which you can choose eight applications for your Launch Box menu.
Once set up, the Launch Box Manager sits in your Task Bar.
Right-Click to Edit the Manager OR Left Click to Open and access the items in your Application List.
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

[Solved] Quick launch buttons not working

So I bought the GT60 2OC 3k IPS edition around 3 months ago and it's been working more or less perfectly. However today I haven't been able to use any of the quick launch buttons, they don't even light up when clicked on. I tried reinstalling SCM multiple times but nothing changed. Is there any easy fix solution to this problem?

I just read about the EC reset and tried it out. It worked! Sorry for the needless thread, although I'd still like to thank the community and moderators of these forums that provide some useful information

Volume and Media Quick launch buttons not working Pavilion DV4 1100EA

Hi,
I recently had to replace my hard disk and reinstall windows 7 (32bit) from scratch. I have loaded HP Quick launch driver V6.50.12.1 (2009-12-09, latetest on website) but have the following issues:
Media Quick Launch button does nothing (despite media programs been installed)
Volume slider button does not provide the previous clicking and volume bar on the screen when being used. (I have checked that the sound is enabled in the Bios).
I have uninstalled the Driver and reinstalled it several times, but it does not fix the issue.
Any suggestions would be appreciated.
Regards,
Dave

Hi,
QuickPlay will not work under Windows 7 ( it was the option for Vista ) and was replaced by the MediaSmart software option.
If the media button you refer to has a Q rather than an M, there is an alteration you can make to the registry that will allow you to launch SmartMenu from this button.
The key is located at:
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett-Packard\HP Quick Launch Buttons
Modify the path for:
QAction
To:
C:\Program Files\Hewlett-Packard\HP MediaSmart\SmartMenu.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Quick Launch Buttons not working on dv7-3085dx

Hello HP world.
I am having a problem that I cant fix it myself and it is driving me crazy.
I am very techy and usually always find a solution to any problem but this one got both of my feet locked.
My Quick Launch Buttons on my DV7-3085dx Running Win7 64-bit.
Are not working. They were working fine since forever until 2 weeks ago I noticed the mute and wireless buttons remained red non stop? and they were not functionable. Almost as if they lost connection to the notebook.
This is what i have tried so far:
- Hard reset (after i did this the red mute button and wireless went off, now only volume and media controls are on, still useless)
- Updating the QuickLaunch Buttons Driver
- Updating the BIOS
- Reinstalling MediaSmart
- New Chipset Driver
- Installing latest IDT driver
- probably other drivers and such which i cant remember but its been over a week that i have been reading online and it came down to this.
I surrender!
Please help me.
Thank you in advance.
Fitim

Fitim wrote:
So i just finished with the System recovery and no luck
The buttons are still not functioning. I just get the audio and player controls lid up but thats it.
They dont work and are useless.
HELP
If they're not working after performing the System Recovery then it's a hardware problem. Could a loose or damaged cable or circuit board.

Volume and mute buttons no longer work

I just upgraed from vista to win7, and the touch buttons above my keyboard that control vomume and mute no longer work.
The touch button for my wireless works (which is of the same type and also above the keyboard).. just not the volume buttons.
Is there someting the upgrade failed to download to make these work?
thanks!
N.

HP Quick Launch Button software ,sp46731
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Since bundle 2921 some of my buttons no longer work

I updated phone to version 6 bundle 2921 over the weekend and now the following buttons no longer work, 'S,G,H,L,W' and my scroll button no longer works either. These speed dials no longer work (speed dials to other letters are fine.)
I have not dropped it, got it wet or let the battery run out. I figure it is a software issue as I didn't have any of these issues before the update. Also, when I do a battery pull, the buttons work for a short time (1 minute) and then no longer work.
Is there an update to the update or can I roll back to my previous version?
thanks

Hello,
The simplest way is to, on a PC (you cannot do this on MAC):
1) Uninstall, from your PC, any BB OS packages
2) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/apps-software/desktop/?lid=us:bboftwareesktopSoftware&lpos=us:bboftware
3) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
4) If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML (there will be at least one, perhaps 2)
5) Launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC. If, during the process, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
Don't forget to backup.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Quick launch buttons no longer work

Similar Messages

Maybe you are looking for